Guys,
I have a problem with my power settings on LG Incite. My config is to turn off screen after 2 minutes if I am not using it, when I am running on internal power.
Now, when I run gps software, I wanna to disable this (iGo Amigo).
Trying adding this to either sys.txt and system.ini (igo) but nothing changed:
[power]
power_off_mode=0
Tested using also powermgm_state (0, 1 e 2), no change.
At last, tried:
[registry]
oninit1="HKLM\System\CurrentControlSet\Control\Power\Timeouts\ACSuspendTimeout:DWORD:0"
oninit2="HKLM\System\CurrentControlSet\Control\Power\Timeouts\BattSuspendTimeout:DWORD:0"
oninit3="HKCU\ControlPanel\BackLight\BatteryTimeout:DWORD:0"
oninit4="HKCU\ControlPanel\BackLight\ACTimeout:DWORD:0"
onexitreset1="HKLM\System\CurrentControlSet\Control\Power\Timeouts\ACSuspendTimeout:DWORD:300"
onexitreset2="HKLM\System\CurrentControlSet\Control\Power\Timeouts\BattSuspendTimeout:DWORD:60"
onexitreset3="HKCU\ControlPanel\BackLight\BatteryTimeout:DWORD:30"
onexitreset4="HKCU\ControlPanel\BackLight\ACTimeout:DWORD:60"
On sys.txt, no change.
Of course, using power settings on control panel works (WM 6.1) but that is not very touch (thumb) friendly.
Any other options?
Thanks.
Related
Is there any option / registry hack how to disable keylock in touch pro?
HTC Touch has an icon - keylock - in the settings, but HTC touch pro doesn't.
It is very uncomfortable to activate (not start, but turn the phone on from saving state) phone via power button.
Maybe I have an idea for new useful program.
Once the display is off, make a round with your finger around the main button on the sensitive desk (like if you want to zoom the page in the Opera). This could be great.
Anyone knows how to disable automatic HW keylock?
Thanks for your thoughts.
Milan
you should ask the raph owners in the appropriate thread.
BUT! on the diamond, you can disable the key lock in settings.
Sorry for wrong thread
I know how to do it on diamond, but I don't on raphael.
in registry HKEY_CURRENT_USER\ControlPanel\Keybd
set:
defaultkeylock
from 1 to 0
Then soft reset.
touch pro has it in settings under the system tab for me (was just educated on this earlier)
In standard ROM Keylock for setup wakeup key missing. It is possible set up only password.
Any idea how to get it back? I want traditional keylock back
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
do you have a
settings->buttons->lock ?
no. have you? i've got only Program buttons, Up/Down Control and backlight tabs there
hmm...you mean setting up a lock to turn off all keys until you hit Unlock then confirm by tapping the key on the screen?
Press and hold the "End" button and that locks the device.
It is configured under start>setting>Long key press.
MIGHT NOT be the thing you are meaning though.
no, you know when you pres power button phone goes sleep mode? there should be a setting where you can decide if you want to allow other hardware buttons wake phone from sleep or other wise.
currently which ever hw button i press phone wakes up i.e send (green) button, terminate call (red button) or action (round) button.
this is no good when phone in your pocket. a small touch to any of them wakes phone up. i thought it is standart wm option as i had it since wizard
Hmm, when i power off the only thing which will power back on is pressing the power button, opening the keyboard or removing the stylus?
I've just got a touch pro and when I power off, no other buttons will wake up the phone.
That being said, I still have my Tytn II and the Key Lock application is found under Start...Settings...System...Key Lock. The Long Key Press app is not what you're after.
It seems strange that your Touch Pro wakes up on any button push. Maybe you need to change a registry setting instead?
wierd ; on mine apart from those, any button powers it up. only config tool i used is advanced confing and there isint any setting regarding this on that tool
inspectorgadjet said:
Maybe you need to change a registry setting instead?
Click to expand...
Click to collapse
do you know which key i should change?
On touch Pro there is no Keylock option in the settings.
Only way how to activate the device is to:
1. press power button
2. open the keyboard
3. take out the stylus
There is no config like on the HTC Touch/Diamond.
I've contacted Julien Schapman, vendor of advanced config and asked him to add this settings to his application.
this is his answer:
Ok I will look at it when I could get a Touch Pro.
Best regards,
Julien Schapman.
So I hope his new version will have this settings. This is really missing.
But maybe someone is able to export this registry path on the HTC Diamond:
HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD
there should me something like
"KeyLock"=dword:1
Or maybe another. I don't know.
http://forum.xda-developers.com/showthread.php?t=422871
very cool app to unlock and lock the phone.
Tested and works on touch pro.
I'll be replacing S2U2 with this!
nolovelust said:
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
Click to expand...
Click to collapse
It should be in the \Windows directory:
\Windows\Keylock.lnk
\Windows\Keylock.exe
Create a shortcut in \Windows\Start Menu\Settings
I don't have this in my HD2 - any ideas if it can be installed seperately?
No idea as I have an at&t Fuze and this is a RAPH/TP/Fuze forum You might have better luck if you posted a link to this thread in the HD2 forum? Also, an alternative to s2u2, check THIS thread (QuickShutdown)
n-Joie! (Enjoy)
KeyLock
eugene7 said:
I don't have this in my HD2 - any ideas if it can be installed seperately?
Click to expand...
Click to collapse
I haven't KeyLock in my ROM by default too, but I found it on another forum after many hours searching in the Internet
Unpack it and put enywhere (in example: "Windows" or "Program Files" and run).
Greetings.
Hi,
I have a touch Pro 2 and before a Touch HD and my question is : how do you use your gps software ? I mean, the purpose of the gps is to be seen.
I have on my phone s2u2, and when i launch TT7, one minute later s2u2 locks my screen... Grrr, Ok I disable it. I go in battery settings, uncheck combos telling to shut off the screen and the phone. The relaunch TT7.
But my phone doesn't lock anymore, and when i'm arrived, I need to recheck battery settings and s2u2. I saw that there was a soft (touchlock 0.4) that would have been what I needed but it's not working with TP2.
So how do you use your gps soft efficiently ?
Many thanks.
Hey all, just got my TP2 and I'm really enjoying it. Its a hell of a lot nicer than the Titan and i760 that I've been swapping between the past two years. Quick question though:
Is there a command somewhere in WM6.1 that will allow me to soft-reset the device? I really don't want to wear out the plastic cover on the back by taking it on and off over and over again to press the reset button.
Thanks in advance,
Dustin
Someone correct me if I am wrong but I believe if you power it down with the red "end call" button and then power it back up with the same button it is equivalent to a soft reset. But if you are looking for a shortcut in windows to do that you can try the various task managers out there like pbar, wisbar lite, ect. They have soft reset options with a very small footprint on the memory.
You are correct. And technically speaking, using the power on/off commits all changes to memory.
I used SPB Mobile Shell 2.0 on my old phones that had a shortcut for it, but I wasn't sure if HTC had an equivalent. I'm really debating on switching back to SPB, but I hear that MS 3.0 isn't perfectly functional with the TP2 yet.
Thanks for your help!
Check this out. It gives you the option to soft reset on the norification when you hold down the power button. I like it.
psSHUTXP
http://forum.ppcgeeks.com/showthread.php?t=78019&page=6
Try ActionScreen
ActionScreen does this by popping up a selection screen when you hold down the power button for 3 seconds. There are many actions to choose from and one of them is Soft Reset. I've been running it for a few days and it seems to work fine and be unobtrusive.
ActionScreen: http://forum.xda-developers.com/showthread.php?t=547432
I think there is a option on the setting manual "wipe all memory" or something like that.
On mine, by holding down the "End Call" button for 3 or 4 seconds, I get a prompt with the following options.
Display Off
Turn Off
Soft Reset
Hard Reset (icon on upper right (a little scary))
Plus icons for
Device Lock Settings
Setting timer actions
Setting Today Icon for this prompt
The prompts displays as Touch Pro 2 Shut Down Option
I have quite a bit of 3rd party software, but I believe this is native to the device. Try it and see what happens.
I don't get those, but I am on a custom rom. I have:
Turn Airplane Mode On
Lock Device
Terminate Data Connection
Set Vibrate
Settings...
sorry double post.
As mentioned these are the two most common:
psSHUTXP and XDAshutdown.
I used XDAshutdown.
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=544016
Here is the best skin IMO.
http://forum.xda-developers.com/showpost.php?p=4582904&postcount=310
I have attached all here
For applying skins for XDA shutdown:
Over write the files in this folder assuming you installed to a storage card:
\Storage Card\Program Files\xdaShutdown
I have enabled the AutoLock feature with Diamiond Tweaks, and it is working fine, but is there at way to set a time for autolock for exsamble 30 sek, when the device is on, now it is only working when i push the power buttom and turn off the screen or holding lock key down.
/elm
Have you tried S2U2 (Slide 2 Unlock 2)? It's freeware and you can get it here;
http://s2u2.ac-s2.com/
Then there is TouchLockPro, especially for the Topaz Here's the XDA thread;
http://forum.xda-developers.com/showthread.php?t=444215
Have fun
I'd like to know if there is a way to prevent Topaz from autolock on some occasions, e. g. when i have mobipocket on, i don't wanna my phone to autolock. Is it possible?
try this one