Database Info

Help, trying to flash.

i was following this guide:
http://forum.xda-developers.com/showthread.php?t=448008
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
fine upto step 8, it goes to the tricolour but then it just stops and it says
RAPHL100
SPL-1.90.0000
MICRO-RAPH (LED) V13
MICROP-RAPH (KEY) V5
PSOC-RAPH STAGE_CVT V0X36
and it just crashes....anyone help me?
FORGOT TO ADD:
It goes to a grey screen and says ' no image file'

This is the guide you should have used.
Sounds like you tried to flash your phone before you Hard SPL'd it.
Good luck!

IMO, USB isn't the best way to flash, because of
- not installed USB drivers for device in bootloader mode
- accidental desktop sleep or usb unplug
SD flash though
- corrupt SD card
- those microSD cards accidentally get dislodged and thus bad flash
i think that the best way is to flash via USB and make sure all drivers are installed... don't touch the computer or phone when it's flashing (maybe move the mouse a bit to prevent screensaver etc.)

I have downloaded kaiser-HardSPLv1, i ran it on the pc.
and i got to step 2, it said
http://img297.imageshack.us/i/htc.png/
my phone turns of, then turns back on again and i dont see the tri colour help please!

iraqi4life said:
I have downloaded kaiser-HardSPLv1, i ran it on the pc.
and i got to step 2, it said
http://img297.imageshack.us/i/htc.png/
my phone turns of, then turns back on again and i dont see the tri colour help please!
Click to expand...
Click to collapse
Your phone is NOT a Kaiser, its a raphael.
You really should have read the guide I pointed you to.
It had the link to the correct SPL for your device.
A little time to read would save you hundreds of $
You may find a fix ( there is a hit and miss solution for this) but you really need to search, read and learn.
Start with this thread.

ah okay thanks alot man, i appreciate you're help.
ive done all that, i get the error {262} it stops at 0% for a few mins then displays the 262 error, i have turned of firewall and ive searched the forum, but no avail?

Okay, i tried to do the hard spl with the sim card and memory card out
but still no avail, ive turned off the firewall and then i ran
RaphaelHardSPL-Unsigned_190_1_3 but still can 262 error, please help this is very frustrating!
what happens is that i run through the steps on the RRU, then the phone goes to a black screen, and the progress bar appears, stays at 0% for 2-3 mins then error 262 appears
please help!!

Okay, i have now successfuly hard SPL my phone.
however, i have inserted a ROM in my micro SD hard, pressed volume down and then clicked reset, however i can only see the tri-colour screen and it still says no image .
please help!

OMG
i think i have bricked my phone,
i turn it on and it goes to the TOUCH PRO screen, then nothing happens

ive done it! it worked on the other pc!!! yay
i am using the energy rom standard.
and also, which one has the theme which has it like this:
http://lh3.ggpht.com/_obTK4UolmtY/Sjo8vSiryNI/AAAAAAAAAPg/XBDAHTFuBJw/NRG_3.0_Today.jpg
does it work with the raphael ?

[Q] [=]Bricked[=] TF700 from ics factory reset

unlocked & was rooted with ICS .30.
I was doing A factory reset, from the tablet options to wipe all games & apps, forgot & wanted to use TWRP. so stopped it from rebooting once I hit the button in ICS to factory reset, bad mistake as, now if I try to use micro sd recovery or APX, but dont have a timer count down, just frozen at this screen.
When the issue first picture with the ASUS logo in the top right corner says::
The Device is Unlocked.
When you try to go to recovery mod it produces here
Android cardhu-user bootloader <2.10. e> released by "US_epad-9.4.5.30-20120907" A03
Checking for android ota recovery
Booting recovery kernel amage
* and everything is stuck here without even a timer, no way to get the usb option even. tried apx shows drivers in windows but dont show a device once you type adb devices. seems to be locked up once it boots now, tried to drain battery & see if it would unlock, nope. tried reset, hard reset, not sure if there is any option to unfreeze, looked around forums & tried many things, but odd it the wipe button is hit in os & stopped even before a reboot, it already wiped some stuff. thought it started after reboot. turned off right when I click the button, was bad mistake of mine.
downloaded JB from asus, unzipped & renamed. but freezes at asus logo without a timer option, or APX wont respond even tho I hear the usb chime & drivers show in windows, ASUS_Android_USB_Drivers were installed, to try fastboot, no device shown tho.
1. Decompress downloaded .zip file (it will be another .zip)
2. Rename it to EP201_768_SDUPDATE.zip
3. Format FAT32 the MicroSD card that you will be using for the update process
4. Copy the file to (the root directory of) your MicroSD
5. Insert it into the tablet
6. Shutdown (power off) the tablet
7. Power it on by pressing and holding VOLUME DOWN and POWER buttons simultaneously
8. When you see white text in the top left corner of the screen, release the buttons ^^ and press VOLUME UP button until you see Android logo and process bar
Let me know if there are other was to unfreeze or is this a $300 mistake to have asus repair as its a software brick.

phone stuck on NO COMMAND

:crying: Nokia 3 is stuck on no command with red triangle, ive tried rebooting system,factory reset,wipe cache on recovery mode nothing works..i had android 7 then updated to 8 and thats when it started freezing there was an update i thought that would help it froze then went NO COMMAND:crying: PLEASE HELP..maybe i need to install a rom and just start afresh? but i can only go to recovery mode.

Solution
UzziTheXhosa said:
:crying: Nokia 3 is stuck on no command with red triangle, ive tried rebooting system,factory reset,wipe cache on recovery mode nothing works..i had android 7 then updated to 8 and thats when it started freezing there was an update i thought that would help it froze then went NO COMMAND:crying: PLEASE HELP..maybe i need to install a rom and just start afresh? but i can only go to recovery mode.
Click to expand...
Click to collapse
I had faced the same issue and Nokia Support told me to visit the service center. But I solved it by myself.
I did not do anything actually.
First I take out the SIM and SD card.
Then Let the phone drain the battery until it shut down. It took more than 1 day for me as my battery was not full.
So you need to wait until the battery empty.
Later I charged device for more than 5hours (actually I left for whole night!!!). Then disconnect the charger. And wait for some hours and then finally press the power button and the Phone is working now.
The only problem I am facing now is with my SD card, because I used the SD card as Internal Storage, but now the Device is asking to format the SD card. Even my PC also cannot read that card... I have lot of data inside the card.... I donot know how to get back that data..:crying:

Updated via?
Did u apply update from SD card?

stay on error screen
press vol+ and vol - with power
wait to turn off, still pressing the 3 button
wait for 2 o 3 short vibration.
release the button.
if the phone not start instantly, you can now flash with sptools or ost la

Unbricking HTC U12+

Hey guys - I hope you're doing well.
I recently got an HTC U12+, but wanted to try using a custom ROM due to all of the bloatware . Unfortunately I think I've ended up bricking my device. Here are some things I've since tried:
- Restoring to the backup I made beforehand in TWRP - restore works without any errors, but then just hangs at the boot screen
- Method 1 from this thread (https://forum.xda-developers.com/u12-plus/how-to/collection-htcu-u12-ruu-firmware-t3794664) - TWRP always says the zip files are corrupted for some reason
- Method 3 from that same thread - this actually worked before, but I tried installing a custom ROM again, somehow messed up again, and now this method no longer works as it just hangs at the "HTC" boot screen for eternity
- Both methods in this thread (https://www.theandroidsoul.com/how-to-install-htc-firmware-ruu-and-zip/) - the first one leads to a "failed remote 99 ru unknown fail terrible mishap" error, and for some reason my PC doesn't see my phone when I try the second despite being able to see it in file manager
- Probably many other methods that I've now forgotten
I know this is a whole lot of information, but I'm in desperate need of some help. I typically like to troubleshoot things myself, but I've been trying to fix this for quite some time now and could definitely use another set of (much more experienced) eyes. I greatly appreciate any help you guys can provide.
Thanks.

Flash RUU with SD card method
Download RUU from here(important:check your CID): https://docs.google.com/spreadsheets/d/1wIRrVQawd5rD-t9VKPQ-SdRK20RcJVZhwD7lhmPIK8w/edit#gid=0
1. rename RUU to 2Q55IMG.zip
2. copy zip in the root of your sd card. - external card / not internal - it will not work
3. reboot to download mode,
4. your device will pick up the zip file and flash it.
5.follow on screen instructions and enjoy your RUU(this method erase all your data)

I'm having an issue with my u12+ where it just continually reboots to a message saying "The boot loader is unlocked and the software integrity cannot be guaranteed. Any data stored on the device maybe available to attackers, do not store sensitive data on this device" and then it shows the white HTC logo that says Powered by Android down the bottom of the screen, it stays like that for about 5 minutes and then reboots and does the same thing over again.
Holding the power down button does nothing, it will not turn off the phone. Holding power and volume down does nothing either. The phone just does this every 6 minutes and reboots and cycle and that's it.
I've tried putting the file 2Q55IMG_IMAGINE_DUGL_O80_SENSE10GP_hTC_Asia_TW_1.53.709.1_Radio_sdm845-000201b-1807311356_release_531499_signed_2_4.zip (renamed to 2Q55IMG.zip) on the root of a 8gb Fat32 formatted SD card, but I just can't get into recovery or download mode.
I've tried holding down all 3 side buttons for minutes, or just the power button, or combination of buttons, they all do nothing to the phone. (it's as tho they are disabled, but sometimes holding a combination of the 3 will make the phone vibrate a little bit, but in no particular time or order)
When the phone is in either state (locked bootloader message or white HTC logo) my Windows 10 PC sees the phone plugged in as a "USB Input Device", not an Android Phone or Android Device. So using ADB or Fastboot commands do not work to it. I've tried to force the driver to the HTC driver but that does not work.
I also tried using the RUU_IMAGINE_UHL_O80_SENSE10GP_NA_Gen_Unlock_1.30.617.2.exe file, but once again it doesn't detect my phone.
Any help would be kindly appreciated.
Cheers!
EDIT: So I was finally able to get into download mode by waiting until the phone done its 6 minute reboot and then holding power down until it vibrated once, then held volume up until it vibrated again, then let go of the power button, I was then able to choose recovery, download etc.
So I managed to get the file 2Q55IMG.zip to install, it said it installed 100% okay. The phone rebooted and now I'm stuck again just at the white HTC logo and Power by Android down the bottom of the screen.
This time the phone is not automatically rebooting itself and no key combinations will make it reboot. I've tried holding them all in certain combinations for periods of time, the phone will not reboot or turn off.
EDIT 2: So maybe I didn't wait long enough after installing the 2Q55IMG.zip file, I finally got the phone to reboot and now I've got a working phone again. happy days :laugh:

whowhatwhen said:
I'm having an issue with my u12+ where it just continually reboots to a message saying "The boot loader is unlocked and the software integrity cannot be guaranteed. Any data stored on the device maybe available to attackers, do not store sensitive data on this device" and then it shows the white HTC logo that says Powered by Android down the bottom of the screen, it stays like that for about 5 minutes and then reboots and does the same thing over again.
Holding the power down button does nothing, it will not turn off the phone. Holding power and volume down does nothing either. The phone just does this every 6 minutes and reboots and cycle and that's it.
I've tried putting the file 2Q55IMG_IMAGINE_DUGL_O80_SENSE10GP_hTC_Asia_TW_1.53.709.1_Radio_sdm845-000201b-1807311356_release_531499_signed_2_4.zip (renamed to 2Q55IMG.zip) on the root of a 8gb Fat32 formatted SD card, but I just can't get into recovery or download mode.
I've tried holding down all 3 side buttons for minutes, or just the power button, or combination of buttons, they all do nothing to the phone. (it's as tho they are disabled, but sometimes holding a combination of the 3 will make the phone vibrate a little bit, but in no particular time or order)
When the phone is in either state (locked bootloader message or white HTC logo) my Windows 10 PC sees the phone plugged in as a "USB Input Device", not an Android Phone or Android Device. So using ADB or Fastboot commands do not work to it. I've tried to force the driver to the HTC driver but that does not work.
I also tried using the RUU_IMAGINE_UHL_O80_SENSE10GP_NA_Gen_Unlock_1.30.617.2.exe file, but once again it doesn't detect my phone.
Any help would be kindly appreciated.
Cheers!
Click to expand...
Click to collapse
with the phone off, turn it on,when you feel first vibration
quick release power key and keep push volume down.
Smartphone should boot in bootloader mode.
can you get into this mode with this guide?

fabrizio b92 said:
with the phone off, turn it on,when you feel first vibration
quick release power key and keep push volume down.
Smartphone should boot in bootloader mode.
can you get into this mode with this guide?
Click to expand...
Click to collapse
Cheer mates, issue sorted. I just updated my comment in my post.
Not sure if I'm game enough again now to try and put LeeDrOiD and Magisk on it.

Blank screen and confused

I have a px5 radio packed as kanor. It is a px5(1024x600) running 8.0 with mtce_kld_v3.01_1 and has physical buttons.
It was running ok. I went into factory settings and changed the led color and changed the mapping on one button. It said it needed to reboot. It did and now I just have a blank screen.
I can get into recovery mode. I have tried to flash a new mcu from the 4pda site (also 3.01) as well as an update.zip. one I had went through but when it comes up I still have the black screen. I have tried an update.zip that was rooted but that just fails. I tried creating a boot sd card and upgrading (I think this was in malaysk thread. I have read so many things on this sure and am just starting to confuse myself even more.
Can anyone please help me understand what I need to do to try and get this thing back up. I would really appreciate it.
Thanks.

I guess I can not post pictures yet but when I updates the box with update.zip this is what it said on the screen
Install /mnt/usb_storage/update.zip
Finding update package
Verifying update package
Update verification took 33.8 seconds
Installing update
Target: Android/px5/px5:8.0.0/OPR5.170623.007/hts01151054:user <rest was cut out of picture>
Patching system image unconditionally
Patching vendor image unconditionally
Patching oem image unconditionally
Writing trust img
Writing uboot loader img
Writing resource image
script succeeded: result was [1.000000]
Install from SD card complete.
That looks good to me but I still reboot and get no screen. What am I missing?

Hi.
I have a similar problem.
I was updating my radio auto, the original was on android 8.0 and updated to 10.0
so far so good ... then I wanted to update the mcu because it was at v2.80 and put the file on the sd card and clicked on mcu update. the radio restarted and a screen appeared like this:
- a screen with chinese Letters
- a red, a green and a blue bar
- a Version PX5 V1.1
to get out I had to take the card out and press the reset button. now the screen goes black and nothing happens. but if you put the card in and press reset you will return to the screen with Chinese letters ...
the worst thing is that I cannot now enter recovery mode.
I tried using the reset button and nothing .... the only signal that seems to be for recovery mode is to press the power button for 10s, the lights flash, then I let go and charge again but nothing happens ...
Help me, please...

After the lights flash when holding the power button let go then press again right away.
I never get any letters out anything on the screen unless I enter recovery.

Waltreynolds said:
After the lights flash when holding the power button let go then press again right away.
I never get any letters out anything on the screen unless I enter recovery.
Click to expand...
Click to collapse
Again in power button? Without sd card nothing happened...
I need sd case with firmware or mcu!?

tiago.cruz said:
Again in power button? Without sd card nothing happened...
I need sd case with firmware or mcu!?
Click to expand...
Click to collapse
If you get recovery button sequence LED flashes, or into recovery, MCU is fine.
No screen, try OTG Android recovery - refer my signature.

marchnz said:
If you get recovery button sequence LED flashes, or into recovery, MCU is fine.
No screen, try OTG Android recovery - refer my signature.
Click to expand...
Click to collapse
Thanks for the suggestion. I just started to read the thread. DO I really still need a jig? Afraid that might be beyond my skill set.
Either way, Thanks.
Walt