Related
Ok so i've looked, cant find anything to help me out here... Its always possible i used the wrong search terms but i think i did pretty good...
Anyway, i had flashed i believe a CWM version of ICS when it first came out because it was easy to do, and i was able to keep root. Well I ended up with the CWM Recovery version that had the problem of constantly booting into CWM, so i fixed that and the tablet was telling me there was a firmware update, so i did it..
Now im stuck at the splash screen... When i try to boot into Recovery, it says its loading the recovery image but never does anything else. When i tried to load the other screen where you can choose recovery or the OS, i think people call it the linux screen? I dont remember, but when i did that, the big battery meter displayed on the phone for a second then disappeared... Wont turn on now, so i just plugged it in.. Is there something im missing? Or something i can do that anyone is aware of?
Check if the Android Debug Bridge works, and is your device a B60 or lower, (sbkv1)? If so you can use NvFlash to restore the tab.
Thing O Doom said:
Check if the Android Debug Bridge works, and is your device a B60 or lower, (sbkv1)? If so you can use NvFlash to restore the tab.
Click to expand...
Click to collapse
Its B90, SBKv2...
Last time i tried to boot, i tried Power+Volume Up and i saw the large battery that android phones typically show when they are powered off and you plug it in.. If i remember right, TF101 typically boots up if you plug it in when turned on, but it turned on, flashed that battery image and shut off, havent been able to turn it on since... Plugging it into my computer though, it wont turn on, plugging it into the wall outlet it turns on and sticks at the splash screen, so i'm gonna leave it there for a bit and see if it charges, then i'll try plugging it into the comp to see if ADB works... I'll let you know, thanks!
To get to recovery its power +vol down. Power + vol up gets you to apex mode, blank screen.
Sent from my Transformer TF101 using xda premium
.....don't know if I read all your info correct but to enter recovery is volume down + power until you get a message at the top of the screen then you let go both and press volume up to enter recovery or if you don't hit volume up it takes you to the cold boot / wipe data screen.
Yes, i posted that... I tried booting to recovery and it freezes when it says its loading the recovery image.
I was trying other combinations trying to remember the linux screen or whatever it was called, but either way. ADB mode doesnt work, im stuck at the splash screen.
SOLUTION: Do not do the update after fixing your TF101 if you have this same problem, because you'll have it again! Either way, here's what you do.
1) Since you cant shut off the TF101, hold the power button until the screen goes blank, then immediately let go of the power button and hold volume down. 2) The splash screen will re-appear, dont let go of the Volume Down button until you see the text at the top left corner of the screen prompting you to press volume up to enter recovery.
2) Dont press Volume Up since it will freeze trying to get into recovery. Instead, just wait and make sure your not holding down or pressing any buttons.
3) After a few second, you will be presented with two icons, one to wipe data and one to boot android/linux, selecting android/linux WILL work and boot, but you'll have the same issue as before without fixing anything if you reboot again. Follow the instructions to wipe your data. YOU WILL LOSE EVERYTHING!
4) At this point, Recovery still wont work. Boot your TF101 and get it setup and use the Play Store to download a terminal emulator
5) Open the terminal emulator and type SU and press enter, confirm superuser access.
6) Type in the following and press enter when done: echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0
7) Restart your transformer, let it boot normally the first time, after that, recovery should work.
8) Problem solved, DONT install the update this time! Install a custom ROM the typical way using CWM, and your set!
So, one thing i've noticed is im being spammed out of my mind from the OS to do that system update, so i've found that the best thing to do once your bootable, is to flash a custom ROM.
I tried this but went back to the same ICS version I had before, and ran into the same problems. Ended up with a whole other ROM, and now all problems are solved!
Good luck to anyone that has this issue!
#3
so you lost all data, all apps, all settings, all the effort and work and time to config apps and settings... UGH
I am in the same boat on my TF201 after the JB update bricked my tablet... really pisses me off as Asus says RMA it (which you know they will just wipe your data) or wipe the data yourself and hop it works. So badly want to salvage my app settings and all the work I did to trick out my tablet. F***** Asus, their own update fried my tablet.
Below is the procedure to FACTORY REST, ROOT AND MArket installation for COBY KYROS MID7010 or MID 7010 Tablet owners stuck at white boot screen OR android OS not loading after any manipulation with the firmware OR interested in rooting and installing google market.
FACTORY RESET Steps:
1. Turn OFF the device
2. Make sure its turned OFF
3. Press and hold simultaneously POWER + BACK + HOME buttons (as in third Pic)
4. The device turns on with COBY logo, keep pressing......
5. After about 15 to 20 seconds the COBY LOGO display changes and prompts to press the keys again within 5 secs to factory reset the device.
6. LEAVE the power button now while still pressing HOME and BACK keys
7. FActory reset is initiated!
TO INSTALL MARKET AND ROOT:
1. Enable adb debugging on your tablet,connect to pc wait for driver installation if any. Run SuperOneClickv2.3.2-ShortFuse.zip > choose advance> driver install
2. Will prompt to force install drivers ( if the adb device drivers not available), accept and sit back! the program will not respond for a while 10-15mins and prompts back that the drivers are installed.
3. Run root from the above software (clicking root tab)
4. Open root explorer or any file browser accepting root, browse to system/app copy all files in attached folder (apks) here, if prompts to rewrite( do not allow!)
5. Change permissions of the copied files as in other apks in system/app folder.
6. Google market app appears in app drawer.
7. Run and Enjoy!
thnks for the useful thred
thanks a lot for this thred since no one is taking care of this model "7010" .. my kyros 7010 stop working and freez on android booting screen a did the method you post here but i got this message
" Unexpected updater mode! Pleas reboot your device"
could you pleas support me with any help since i am olmost about to lose the hope to get my Kyros back to life
Follow the buttons, you arent pressing hard the back button. its HOME + BACK+POWER all three buttons altogether. until the coby screen changes to reset request as in pics. Ask someone to press the power button while you press the front two. UNTIL THE COBY LOGO display changes (15 to 20 seconds).
the same problem
really i tryed it ten times and got the same message " unexpectaed updater mode please reboot your device"
it gives me Penguin logo "Linux logo" befor this message - this logo is normally comes even befor it stop working
pressing the power button + home button only displays your message. You are definitely not pressing back button hard enough or its broken?!?. TRy pressing power than reset pin at back together. a white screen appears release both buttons and try the three button combination again.
YOU must apply steady pressure on the three buttons for 20 seconds till the coby logo screen automatically changes. Ask someone else to help you with it. THIS KEY COMBINATION DEFINITELY WORKS!
the same problem
i did the power + reset and yes it gives me a white screen then use the three buttons "i am sure i pressed them well"
the coby logo screen changes to Penguin logo "Linux logo" and it gives me the same message
i feel that i am breaking your head but you are the only hope that i have no more help on this model .. so can i do that throw ADB i did root it using adb and whin i tybe # recovery it gives me (android system recovery <e3>) with 3 choces to restor or reboot somthing like that but non of them are working i can choose between them but i cant select or confirm i tried all the buttons but no action
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
i releas them after i swe the message "unexpectaed updater mode please reboot your device" and i try to wait more than one min as well
and yes i am sure it is coby kyros MID 7010. i got it from Dubai as a present
i know there is no recovery partition as i read it a lot on the internet.
so do u have any recovery rom for that model or any other way to install system on it???
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
rooting
i did everything and then when i connect the device via usb (after debugging n since there is no unmount) superoneclick does nothing, no driver update nothing, it just stays there, n if i click root, it hangs(super). m i doing something wrong?
it hangs! thats the point..... it takes time. Does it prompt to force install drivers yes:no?
the program will not respond for a while
Click to expand...
Click to collapse
Where does it freeze? ADB kill server> ADb start server>?
stuck on android logo after factory reset
mughalgxt said:
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
Click to expand...
Click to collapse
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
kernel
mughalgxt said:
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
Click to expand...
Click to collapse
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
magus1982 said:
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
Click to expand...
Click to collapse
You have to keep holding the three buttons the Coby LOGO display will change after 20-30 secs. ANDROID logo means the reset is done and the OS is loading will take time after reset. blank black screen means the Os cannot load hence factory reset must be done. Which logo are you stuck with?
sherif.afifi said:
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
Click to expand...
Click to collapse
Your final hope is getting the back button repaired or ask someone else to do the reset procedure for you. No one is going to create a kernel for you. or for coby. try kyros forum website see if you persuade someone for more TECHNICAl support. I believe your tab's back button is damaged.
I have the Coby Kyros MID7010wc and I followed those steps, but it didn`t work - google market icon didn`t show up on apps screens. I tried to run those apks but it always says "application is not installed".
Is there something else that I can do?
did you root the device successfully?
how did you change the permission of the files in the attachment after pasting them into /system/app folder?
did you restart the device after above step?
* You need not manually install anything as it wont work just copy and paste them into system/app, change permissions and restart.
Yes it is rooted - used SuperOneClick
I didn`t understand when you said "if prompts to rewrite( do not allow!) "
if I don`t overwrite the apks it won`t install the files.
Anyway, used root explorer and copied each apk one by one in the system/app folder then changed the permission (checked every fields).
Did you reboot the system after changing permissions? Overwriting all apks in the attachment to system/app is not required rather unnecessary as google framework already exists only missing is phonesky or android market. These steps worked for me try reading other mid7xxxx threads to cross check
I redone everything and it is working as expected.
thanks!
Hi everyone.
Ok back in August I purchased an Oppo r7plus "m" version not knowing the difference, from a 3rd party seller. I know I probably should've waited until the phone would go on sale in Canada but I wasn't sure if it ever would. So anyways the phone worked great for a while. I noticed that it came pre loaded with OPPO Tools and Super SU. I thought wow, this phone is rooted right of the box? Great! So I started uninstalling some native apps of which I thought were just "bloatware", everything went fine until I uninstalled the weather app.
When I turned the phone back on after restarting, it now goes into the OS but continuosly flashes on and off and you can only access the dropdown notification screen. Luckily from there I can still access the settings menu. I tried holding the power button and volume down button to go to the factory boot screen. That worked and in there its says the color os version, but in brackets says
(rooted).
I can only assume the phone is still rooted but is stuck in some sort of soft brick. I've been doing alot of reading into how I might be able to fix the phone but I'm having trouble figuring it out. I'm good with computers and all but not to this level and I never rooted an android phone before.
Please somebody HELP.
So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?
NALSONSON said:
So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?
Click to expand...
Click to collapse
Hi, how did you sort it? Are you still in need of stock recovery? I have one for model F, dont know if it works with M model.
1. Download and extract my RAR files ---> HERE
2. Open your PC device manager
3. Connect an usb cable only to your pc then press and hold the phone volume + button and then connect the usb cable to the phone
3. In the device manager you will see Qhsub_bulk then release the volume+ button
4. Right click on Qhsub_bulk and choose update driver
5. Use one of the driver folders which you alredy extract to install the Qualcomm driver and you will see it like 9008
6. Your phone have to be charged very well for a few hours before you try to flash it.
7. Remove it from the charger then connect an usb cable only to your pc.
8. Try to press and hold the volume + and power buttons at the same time for a few seconds and connect the usb cable to the phone.
9. You have to see the driver in the device manager like 9006 (you can release the buttons) [it wasn't easy for me so keep trying]
10. Open the MSMDownloader and press start
11. If everything is ok you will see a green progress bar flashing. (I was stuck here with the "NON-HLOS.bin" file which you can see in the "Other NON-HLOS File" folder inside the rom which you download)
12. When the process complete in about 10 minutes you can remove the usb cable from your phone.
13. Now you have to do a veeeeeeeery long press and hold on your power button untill you feel the vibration and after that you will see the OPPO logo.
14. Leave it for 5-10 minutes to load the Color OS.
15. Ok you have a working phone but still some apps icons that are missing and the keyboard doesn't appear when you have to write something.
16. Download THIS zipped ROM and put it in the internal storage of your phone.
17. Shut down the phone then press and hold the volume - and the power button at the same time for a while intil you enter into recovery mode.
18. Choose english and then install rom from zip file. After the installation complete reboot the phone and you will get a working keyboard and few more apps like Browser, Chinese market and else....
For me i still need to insert the IMEI's because they are lost... and now i have message: Oppo nv backup. The NV partition is invalid...
Good luck to all! And if you want to give me a beer: paypal: [email protected]
Still stuck
I still can’t detect any qhsub_bulk in device manager. Even I reformat my pc to window 7 64bit it still not detecting. What it detected was only like Android usb.
Oppo r7 plusm suspected soft brick with rooted.
- stuck at oppo logo
- try recovery with stock rom but error * failed to update*
- wipe all but still same failed to update
- try the guild here but can’t detect my device with the tool
This Vizio XR6M came with the M65-D0 display I bought. It was running their unmodified version of whatever software was preinstalled. It worked fine all the way up until they pushed an OTA to it, which is causing it to bootloop. I cannot get into any usable recovery because the screen that appears where recovery options should be is the Android on its back with an exclamation point I believe. Can anyone help me get this thing working again? Thanks.
I was really hoping that someone would have a clue. This really sucks. I'll keep waiting
Had the same thing happen to me. When on the screen with the android on his back, hold the power button and quickly press volume up. This should give a menu with a handful of options. Scroll up and down with volume up and down and press power to select. One of the options is to wipe the device. Do this and then select reboot. (There is also a wipe cache option, but this didn't do anything for me.) This is what I was told to do by Vizio support. Unfortunately I've had to do this wipe 3 times now. This tablet is very unstable in my opinion. (Once after an OTA update, once after I rebooted it, and once it just rebooted itself and got stuck in the loop.) I came across your post while looking for info on rooting the tablet or at least getting a backup like TWRP on it so I don't have to spend an hour downloading apps and getting my settings back like I had them every time the tablet decides to lose its **** and go haywire. Best of luck.
Gah... I spent about an hour trying different key combinations to get into recovery... I thought I tried all the key combinations at that Android screen too... But I guess not. Thanks!! Trying a wipe of cache with no expectations that it'll work... full data wipe incoming....
Getting to the Factory menu
1. Hold pwr button down to turn the tablet off
2. Hold the vol dwn button and press the pwr button
3. Anddroid logo with an ! should appear
4. Hold the pwr button and press the vol up button
5. The factory menu should appear
I just picked up two of these TVs and wall-mounted them and they are pretty fantastic, one of the remotes updated just fine but the other one keeps giving me a signature validation failed when it tries to update. I've wiped the cash down a factory reset from recovery and factory reset from inside Android. Anyone have any ideas? I've downloaded it on 3 different WiFi networks and tried to install it probably 10 times now.
Vizio's online chat support to the rescue. I told them what the issue was, what all I tried, she had me verify that I had already done what they suggest (basically get into recovery and such), and told me to send them a copy of my receipt and I'd get a free brand new one, or they could send me a refurbished one without it.
Here's the instructions she gave me.
Please try the following steps:
1. Power the tablet off. While the tablet is off press and hold the Volume Down and Power keys at the same time.
2. The tablet will vibrate and the V logo screen will pop up. Let go of the POWER and VOL DOWN key when the tablet VIBRATES.
3. The tablet will show a picture of the Android mascot laying on the ground with the text 'No Command'.
4. Press and hold the Power key and tap Volume Up key. (One you've tapped the volume up key you can release the power key).
5. Use the Volume Up and Down keys to navigate the options, and the Power Key as an 'OK' button to select options.
6. Navigate down to Wipe Data/ Factory Reset, and press the Power key.
7. Text will appear in the bottom the screen indicating the tablet is resetting.
8. The Android Recovery options will appear again. Use the Vol Keys to navigate to 'Reboot System Now' and press the power button to confirm.
Note: After the reset it may hang on the V logo screen for 5+ minutes before initiating the rest process.
RED ZMAN said:
Vizio's online chat support to the rescue. I told them what the issue was, what all I tried, she had me verify that I had already done what they suggest (basically get into recovery and such), and told me to send them a copy of my receipt and I'd get a free brand new one, or they could send me a refurbished one without it.
Here's the instructions she gave me.
Please try the following steps:
1. Power the tablet off. While the tablet is off press and hold the Volume Down and Power keys at the same time.
2. The tablet will vibrate and the V logo screen will pop up. Let go of the POWER and VOL DOWN key when the tablet VIBRATES.
3. The tablet will show a picture of the Android mascot laying on the ground with the text 'No Command'.
4. Press and hold the Power key and tap Volume Up key. (One you've tapped the volume up key you can release the power key).
5. Use the Volume Up and Down keys to navigate the options, and the Power Key as an 'OK' button to select options.
6. Navigate down to Wipe Data/ Factory Reset, and press the Power key.
7. Text will appear in the bottom the screen indicating the tablet is resetting.
8. The Android Recovery options will appear again. Use the Vol Keys to navigate to 'Reboot System Now' and press the power button to confirm.
Note: After the reset it may hang on the V logo screen for 5+ minutes before initiating the rest process.
Click to expand...
Click to collapse
And after the hair and saliva samples to verify you're really a human and not something from Nibiru, you were able to get into recovery and get it working right?!
Crazy, ive had at least 15 different android devices, and never ever needed to go through a military-style agility course to get into recovery.
Sent from my SM-N920P using Tapatalk
jerry43812 said:
And after the hair and saliva samples to verify you're really a human and not something from Nibiru, you were able to get into recovery and get it working right?!
Crazy, ive had at least 15 different android devices, and never ever needed to go through a military-style agility course to get into recovery.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
It took like 2.5 weeks to get the replacement too, but it was brand new. Now I've got 2 tablets, 3 wireless chargers, and I don't want to use them at all. LOL
Does anyone know if anyone has a factory image that can be flashed? I think mine has bad firmware so resets don't do anything to fix it.
This device have made by Chinese/Indian company Borqs. The code name Bennu-M. Platform is Qualcomm APQ8016 (MSM8916 w/o modem). There should work standard method to bring EDL mode. Hold Vol+ and Vol- at power on (press power). Then connect to the PC. Thus device will stay look dead, however should be detected as Qualcomm QDLoader 9008 on the PC side. This is the factory described method.
You can flash factory firmware from this mode using external bootloader (programmer) for MSM8916 firehose protocol. This procedure is described in the thousands of manuals around the net. Qualcomm tools like QPST or QFIL can be used as good as many 3rd party utils to flash and manage any another available way. Many professional 'box' tools should support this device too but only as 'generic' msm8916 (if applicable).
However I can't find the firmware package for this device anywhere. You should ask and require the manufacturer/distributor to publish firmware, the source code and all the corresponding matherials to be able to flash and rebuild firmware from sources in any manner you want without any limitations as required by GNU/GPL free open source software licenses this firmware is obligated to.
Everyone who have the device working or software dead, can try to dump the current firmware and data, stored on the internal eMMC memory module in part(s) or in whole image using free QTools project utilities and suitable external bootloader with ability to dump eMMC, not only to flash as many factory supplied programmers do. There are programmer(s) for MSM8916 available in the project repo. Read and understand manuals carefully before trying anything!
There is definitely another ways to root, dump, flash, manage the device in any manner YOU WANT, not only the way you are "allowed" to use your own device by manufacturer/distributor. FTA!
You can root the device then dump all the multiple partition images manually (dd if=/dev/block/mmbblk0...... of=/sdcard/......) or using built custom recovery like CWM/TWRP for your device. Please note, kernel sources are important but not mandatory to build e.g. CWM. You can build one using CWM image from the similar device and the kernel (boot/recovery) image binaries from your device. There are good manuals and image repacking utils available around like e.g. AndImgTool.
There are the way to produce factory image from the eMMC/partitions dump(s). Use utils like R-Studio to dump particular partition images from the eMMC dump (it's like whole HDD or UFD image with all the sectors raw, one by one, w/o any modifications/compression/etc) Manuals / utils are avavailable to make e.g. sparse and xml scripts set which is flashable by the programmer in the EDL mode (i.e. from any damaged state, because EDL is built in to the PBL and masked to the internal CPU ROM, thus can not be damaged in any manner, except firing the CPU up).
You can also flash partition images from the more common Fastboot mode, unless eMMC GPT and bootloaders (SBL/RPM/TZ/ABoot) stay intact (logo showed). You can't dump from fastboot, which is common due to the (foolish) 'safety' requirements. It's security by obscurity and is definitely not for your favor, but for the corps control over you and force to send valuable private data to foreign clouds.
Please share eMMC full and/or partitions dumps using reliable 'neverending' file cloud/hosting since there is no factory firmware available yet (ever). I do not own this device and never seen being overseas, so I can't share. Help each other and f... the mfrs and matrix!
Hey guys - I hope you're doing well.
I recently got an HTC U12+, but wanted to try using a custom ROM due to all of the bloatware . Unfortunately I think I've ended up bricking my device. Here are some things I've since tried:
- Restoring to the backup I made beforehand in TWRP - restore works without any errors, but then just hangs at the boot screen
- Method 1 from this thread (https://forum.xda-developers.com/u12-plus/how-to/collection-htcu-u12-ruu-firmware-t3794664) - TWRP always says the zip files are corrupted for some reason
- Method 3 from that same thread - this actually worked before, but I tried installing a custom ROM again, somehow messed up again, and now this method no longer works as it just hangs at the "HTC" boot screen for eternity
- Both methods in this thread (https://www.theandroidsoul.com/how-to-install-htc-firmware-ruu-and-zip/) - the first one leads to a "failed remote 99 ru unknown fail terrible mishap" error, and for some reason my PC doesn't see my phone when I try the second despite being able to see it in file manager
- Probably many other methods that I've now forgotten
I know this is a whole lot of information, but I'm in desperate need of some help. I typically like to troubleshoot things myself, but I've been trying to fix this for quite some time now and could definitely use another set of (much more experienced) eyes. I greatly appreciate any help you guys can provide.
Thanks.
Flash RUU with SD card method
Download RUU from here(important:check your CID): https://docs.google.com/spreadsheets/d/1wIRrVQawd5rD-t9VKPQ-SdRK20RcJVZhwD7lhmPIK8w/edit#gid=0
1. rename RUU to 2Q55IMG.zip
2. copy zip in the root of your sd card. - external card / not internal - it will not work
3. reboot to download mode,
4. your device will pick up the zip file and flash it.
5.follow on screen instructions and enjoy your RUU(this method erase all your data)
I'm having an issue with my u12+ where it just continually reboots to a message saying "The boot loader is unlocked and the software integrity cannot be guaranteed. Any data stored on the device maybe available to attackers, do not store sensitive data on this device" and then it shows the white HTC logo that says Powered by Android down the bottom of the screen, it stays like that for about 5 minutes and then reboots and does the same thing over again.
Holding the power down button does nothing, it will not turn off the phone. Holding power and volume down does nothing either. The phone just does this every 6 minutes and reboots and cycle and that's it.
I've tried putting the file 2Q55IMG_IMAGINE_DUGL_O80_SENSE10GP_hTC_Asia_TW_1.53.709.1_Radio_sdm845-000201b-1807311356_release_531499_signed_2_4.zip (renamed to 2Q55IMG.zip) on the root of a 8gb Fat32 formatted SD card, but I just can't get into recovery or download mode.
I've tried holding down all 3 side buttons for minutes, or just the power button, or combination of buttons, they all do nothing to the phone. (it's as tho they are disabled, but sometimes holding a combination of the 3 will make the phone vibrate a little bit, but in no particular time or order)
When the phone is in either state (locked bootloader message or white HTC logo) my Windows 10 PC sees the phone plugged in as a "USB Input Device", not an Android Phone or Android Device. So using ADB or Fastboot commands do not work to it. I've tried to force the driver to the HTC driver but that does not work.
I also tried using the RUU_IMAGINE_UHL_O80_SENSE10GP_NA_Gen_Unlock_1.30.617.2.exe file, but once again it doesn't detect my phone.
Any help would be kindly appreciated.
Cheers!
EDIT: So I was finally able to get into download mode by waiting until the phone done its 6 minute reboot and then holding power down until it vibrated once, then held volume up until it vibrated again, then let go of the power button, I was then able to choose recovery, download etc.
So I managed to get the file 2Q55IMG.zip to install, it said it installed 100% okay. The phone rebooted and now I'm stuck again just at the white HTC logo and Power by Android down the bottom of the screen.
This time the phone is not automatically rebooting itself and no key combinations will make it reboot. I've tried holding them all in certain combinations for periods of time, the phone will not reboot or turn off.
EDIT 2: So maybe I didn't wait long enough after installing the 2Q55IMG.zip file, I finally got the phone to reboot and now I've got a working phone again. happy days :laugh:
whowhatwhen said:
I'm having an issue with my u12+ where it just continually reboots to a message saying "The boot loader is unlocked and the software integrity cannot be guaranteed. Any data stored on the device maybe available to attackers, do not store sensitive data on this device" and then it shows the white HTC logo that says Powered by Android down the bottom of the screen, it stays like that for about 5 minutes and then reboots and does the same thing over again.
Holding the power down button does nothing, it will not turn off the phone. Holding power and volume down does nothing either. The phone just does this every 6 minutes and reboots and cycle and that's it.
I've tried putting the file 2Q55IMG_IMAGINE_DUGL_O80_SENSE10GP_hTC_Asia_TW_1.53.709.1_Radio_sdm845-000201b-1807311356_release_531499_signed_2_4.zip (renamed to 2Q55IMG.zip) on the root of a 8gb Fat32 formatted SD card, but I just can't get into recovery or download mode.
I've tried holding down all 3 side buttons for minutes, or just the power button, or combination of buttons, they all do nothing to the phone. (it's as tho they are disabled, but sometimes holding a combination of the 3 will make the phone vibrate a little bit, but in no particular time or order)
When the phone is in either state (locked bootloader message or white HTC logo) my Windows 10 PC sees the phone plugged in as a "USB Input Device", not an Android Phone or Android Device. So using ADB or Fastboot commands do not work to it. I've tried to force the driver to the HTC driver but that does not work.
I also tried using the RUU_IMAGINE_UHL_O80_SENSE10GP_NA_Gen_Unlock_1.30.617.2.exe file, but once again it doesn't detect my phone.
Any help would be kindly appreciated.
Cheers!
Click to expand...
Click to collapse
with the phone off, turn it on,when you feel first vibration
quick release power key and keep push volume down.
Smartphone should boot in bootloader mode.
can you get into this mode with this guide?
fabrizio b92 said:
with the phone off, turn it on,when you feel first vibration
quick release power key and keep push volume down.
Smartphone should boot in bootloader mode.
can you get into this mode with this guide?
Click to expand...
Click to collapse
Cheer mates, issue sorted. I just updated my comment in my post.
Not sure if I'm game enough again now to try and put LeeDrOiD and Magisk on it.