:crying: Nokia 3 is stuck on no command with red triangle, ive tried rebooting system,factory reset,wipe cache on recovery mode nothing works..i had android 7 then updated to 8 and thats when it started freezing there was an update i thought that would help it froze then went NO COMMAND:crying: PLEASE HELP..maybe i need to install a rom and just start afresh? but i can only go to recovery mode.
Solution
UzziTheXhosa said:
:crying: Nokia 3 is stuck on no command with red triangle, ive tried rebooting system,factory reset,wipe cache on recovery mode nothing works..i had android 7 then updated to 8 and thats when it started freezing there was an update i thought that would help it froze then went NO COMMAND:crying: PLEASE HELP..maybe i need to install a rom and just start afresh? but i can only go to recovery mode.
Click to expand...
Click to collapse
I had faced the same issue and Nokia Support told me to visit the service center. But I solved it by myself.
I did not do anything actually.
First I take out the SIM and SD card.
Then Let the phone drain the battery until it shut down. It took more than 1 day for me as my battery was not full.
So you need to wait until the battery empty.
Later I charged device for more than 5hours (actually I left for whole night!!!). Then disconnect the charger. And wait for some hours and then finally press the power button and the Phone is working now.
The only problem I am facing now is with my SD card, because I used the SD card as Internal Storage, but now the Device is asking to format the SD card. Even my PC also cannot read that card... I have lot of data inside the card.... I donot know how to get back that data..:crying:
Updated via?
Did u apply update from SD card?
stay on error screen
press vol+ and vol - with power
wait to turn off, still pressing the 3 button
wait for 2 o 3 short vibration.
release the button.
if the phone not start instantly, you can now flash with sptools or ost la
Related
I recently flashed a new ROM and everything went well. 2-3 weeks later my phone died from lack of charge, I connected it. I turned it on and my start up screen begins but it just stays there...the phone doesn't turn on. I've let it charge completely, and it still will not turn all the way on.
Is there something I can try? How does one get into recovery or download mode with this phone?
Start your phone by pressing volume up and power button together. This will boot the phone into boot loader menu. Then use volume button to scroll down and select recovery. Press power button to boot into recovery.
You may try flashing a diff ROM and see if it boots.
Sent from my Nexus S
The ROM (a Hellybean version) is just not working...I reloaded it and I still get stuck at the startup screen. As this phone doesn't have an external SD card, how would one go about putting in another ROM?
Or simply, how do I go back to stock? Is there something like ODIN? Sorry the noob questions...I know my phone front and back (old Captivate) and I'm actually trying to fix this for my boyfriend. Thanks
anshumandash said:
Start your phone by pressing volume up and power button together. This will boot the phone into boot loader menu. Then use volume button to scroll down and select recovery. Press power button to boot into recovery.
You may try flashing a diff ROM and see if it boots.
Sent from my Nexus S
Click to expand...
Click to collapse
You're awesome, thank you. I was able to get in this way.
Lancered said:
The ROM (a Hellybean version) is just not working...I reloaded it and I still get stuck at the startup screen. As this phone doesn't have an external SD card, how would one go about putting in another ROM?
Click to expand...
Click to collapse
Go into Recovery-> Mount and Storage -> Mount USB Storage, then you're Computer will recognize your phone, and will able to see your SD card, then put Rom in the Sd Card, unmount SD card from recovery, Go back, do a factory reset, wipe cache, wipe dalvik cache, choose zip from SD card and happy Flashing
It worked Thank you guys! :good:
Last night my G6 rebooted itself and now it is stuck in a fastboot loop. It keeps restarting itself when connected to charger or PC. Nothing happens when phone is disconnected from charger/pc. Only message on screen is "Keep pressing power key for 10 seconds to exit fastboot mode" but it doesnt help. Phone was stock and not rooted...
MLu75 said:
Last night my G6 rebooted itself and now it is stuck in a fastboot loop. It keeps restarting itself when connected to charger or PC. Nothing happens when phone is disconnected from charger/pc. Only message on screen is "Keep pressing power key for 10 seconds to exit fastboot mode" but it doesnt help. Phone was stock and not rooted...
Click to expand...
Click to collapse
did you try to flash the newest rom ?
By the way .... which G6 do you have ? (L11, u10 etc..)
In the title it says U10, thought that would be enough info
I never flashed/rooted a phone before so I didnt try anything so far...
edit: I tried the suggestion from this post: http://forum.xda-developers.com/showpost.php?p=59545669&postcount=4
1. redownload the rom file from official location. ( http://consumer.huawei.com/kh/suppor...h.htm?id=38361 )
It is the official for g6-l11 (-> dl a version for G^-u10 instead)
2. put the update.app into dload folder on your sd card (unpack from the zip)
3. shut down your phone
4. hold volume+ volume- and power button. When it start to boot release the power button, and hold both the volumes until the instalation starts
5. you will see that firmware flashing begin, wait for the end
Click to expand...
Click to collapse
It seems to work, I see the green android dude and text "updating from external storage" but the problem is the phone keeps restarting itself so it doesnt continue with the update... I suspect sometings wrong with the battery, short circuit maybe?
edit 2:
After giving up last night i tried the above procedure one more time this morning...and for some reason the installation continued. Phone has been up and running again since 8:30 this morning...
where can i get stock rom that can be flashed via sp flash tool? my huawei ascend g6-u10 is bricked after flashing b330. any solution for this?
my phone is dead but my pc can still recognize it
Hey everyone,
Samsung Galaxy s5
Verizon
Fully stock as of October 10th 2015 (no sure the exact android operating system)
Not rooted or modified in any way
My wife's phone decided to kill itself yesterday. The phone worked fine in the morning then all of a sudden it stopped working. When you try to start the phone it will vibrate and nothing on screen shows up. After about 57 seconds (yes I timed it), the phone quickly displays:
ODIN: Flash read failure
ERROR: There is no pit binary
The phone then goes into a boot loop and repeats this process.
She did not approve any updates or anything, it just happened. I am assuming an app updated itself and the app was majorly corrupted and messed with the kernel?
I have tried the variety of reset options (hold power+Volume up+home screen) and it does nothing. Removing the battery and reinserting it does nothing as well. I tried to boot without the SD card and we get the same results. I can't get the phone into the menu to select recovery or anything.
When I plug the phone into my computer nothing happens. The computer does not recognize it and the phone does not respond. The phone does charge the battery, how do I know? I as well have a galaxy s5 but mine is on ATT. We swapped batteries and we could see that her phone was charging the battery.
I plugged my phone into my computer and it recognizes immediately. I can get into my phone and the SD card from the computer so that rules out the computer as a problem.
Is this hard or soft bricked?
Will a USB Jig force it to give me the download screen or recovery mode or is this thing dead?
Is there a way I can boot from the SD card even though I cant get into the recovery screen?
XDA Visitor said:
Hey everyone,
Samsung Galaxy s5
Verizon
Fully stock as of October 10th 2015 (no sure the exact android operating system)
Not rooted or modified in any way
My wife's phone decided to kill itself yesterday. The phone worked fine in the morning then all of a sudden it stopped working. When you try to start the phone it will vibrate and nothing on screen shows up. After about 57 seconds (yes I timed it), the phone quickly displays:
ODIN: Flash read failure
ERROR: There is no pit binary
The phone then goes into a boot loop and repeats this process.
She did not approve any updates or anything, it just happened. I am assuming an app updated itself and the app was majorly corrupted and messed with the kernel?
I have tried the variety of reset options (hold power+Volume up+home screen) and it does nothing. Removing the battery and reinserting it does nothing as well. I tried to boot without the SD card and we get the same results. I can't get the phone into the menu to select recovery or anything.
When I plug the phone into my computer nothing happens. The computer does not recognize it and the phone does not respond. The phone does charge the battery, how do I know? I as well have a galaxy s5 but mine is on ATT. We swapped batteries and we could see that her phone was charging the battery.
I plugged my phone into my computer and it recognizes immediately. I can get into my phone and the SD card from the computer so that rules out the computer as a problem.
Is this hard or soft bricked?
Will a USB Jig force it to give me the download screen or recovery mode or is this thing dead?
Is there a way I can boot from the SD card even though I cant get into the recovery screen?
Click to expand...
Click to collapse
Sorry for the late response.
It's a strange issue. If you really have changed/flashed/updated nothing, you should first claim warranty (if still available) and send it for repair to the shop/Verzion/Samsung support.
If no warranty, then you may register on xda and ask in the Verizon Galaxy S 5 Q&A, Help & Troubleshooting forum ...
... but if you can boot neither into download mode (Hold Volume DOWN + HOME + POWER) nor into recovery mode (Hold Volume UP + HOME + POWER), it sounds like a hard-brick.
It could also be a screen issue ... but most likely nothing you can fix yourself ... without additional hardware and/or help.
So I recommend to search for a mobile repair/support shop.
Good luck !
Hi Guys, how are you? I think I just bricked my Idol 3 6045B.
Made a downgrade to 5.0.1>Installed TWRP> Made a wipe all ecxept SD Card (FlyOS 1.2 inside SD Card)> and USB.
Tried to flash FlyOs but my phone instantly resetted itself when I press "Flash".
I'm now stuck with no OS. I can still access TWRP, but every rom I try to Flash, TWRP resets itself without flashing.
any help would be really appreciated, I'm a super noob in this things.
Thanks
Nevermind. Mobile Q finally recognized my phone after several tries. Thanks
thefabgar said:
Hi Guys, how are you? I think I just bricked my Idol 3 6045B.
Made a downgrade to 5.0.1>Installed TWRP> Made a wipe all ecxept SD Card (FlyOS 1.2 inside SD Card)> and USB.
Tried to flash FlyOs but my phone instantly resetted itself when I press "Flash".
I'm now stuck with no OS. I can still access TWRP, but every rom I try to Flash, TWRP resets itself without flashing.
any help would be really appreciated, I'm a super noob in this things.
Thanks
Click to expand...
Click to collapse
Download mobile upgrade Q
http://www.alcatel-mobile.com/global-en/support/softwareUpgrade/list
Run it, when u get to the point it asks you to plug it in, put the phone in download mode (press hold power and volume up volume down at same time, when you get red screen release buttons then hold volume up until screen turns black) plug in phone wait until pc beeps that it detected device then click next and wait for it to download and install factory firmware...
Good day everyone,
I have been facing a huge problem in the past weeks after I have done one mistake.
I was installing a newer version of TWRP recovery and instead of installing the image I installed it as zip.
My OS was gone, I couldn't get it to "recover" my OS in any way. The kernel seems fine.
I have tried to use a micro SD and USB cable to install a new ROM but TWRP couldn't detect my SD card and my PC couldn't connect to my phone.
I also wiped my whole data.
My phone doesn't boot in the recovery unless it's not charging and start with ONLY pushing the power button.
Holding power and volume up will make it vibrate 3 times and restart.
Charging the phone makes it stuck on the android logo after the battery status.
The phone overheats and the battery drains extremely .
The only message I got from TWRP is, "No OS installed".
Other logs are inaccessible or wiped.
I would appreciate any advice
Thanks in advance!
1. Turn off your phone
2. Enter the phone Flashmode by holding the volume down button, then connect to a PC (the led should be green and your PC should recognize your Z5).
3. Flash the FTFs in Flashtool.
Information about how to that can be found on this forum.
https://forum.xda-developers.com/xperia-z5/help/flashmode-t3237141
This might help.