Internet Sharing on Samsung i770 Saga - General Questions and Answers

I am surprised at the number of steps it takes to use my new Samsung Saga as a modem for my laptop. With my BlackJack II, all I had to do was start the "Internet Sharing" application and activate it. With this new phone, I have to to to an application called "USB Setting for VZAccess", enable Modem there, soft reset the phone (I can't believe I have to do THAT!), kill ActiveSync, kill hte cellular data connection from Wireless Manager, and then Activate Modem Link. That's a lot of steps, including a soft reset. Is there a faster way to tether?

yes, it is called WMWifiRouter

Thanks nir36, I will check it out.

my pleasure

Related

Problem: Omnia, programs cant connect through GPRS, but opera can!

ok, here is the deal, im going to try to be as specific as possible so i dont cause too much trouble. Thank you in advance!
Phone: Omnia
Version: Lite02
Provider: Wind Greece
Problem: I used to be able to connect to the internet ONLY through my wi-fi connection. In order to "reprogram" the whole deal (under settings > connections > connections) i deleted all the settings there thinking i could do it correct if i started from scratch.. what i fool i was.
Exactly what i did: I installed the Htc_Network_Wizard_GR (in order to get the greek settings automatically for wind. Also, i installed a cab which added a "Opera Widgets" program - cab's name: echOpera Mobile 9.5 b2520.
Current situation: Under connections i got Wind Internet, which apparently has the correct GPRS settings, because, when i set it under advanced > Select Networks > Programs that automaticaly connect to internet:, AND select the Opera browser to use that connection to connect to the internet, Opera DOES connect and show pages JUST FINE! on top of that when i pass from Opera a youtube video to CorePlayer to play it.. It DOEs!
Now, EVERY other program that uses internet doesnt seem to find the connection!! for example, youtubeplay, when i press feed: top rated, it IMMEDIATELY sends message "search failed, internet connection not working or timeout." Same goes for: SPB weather, Insight, and even the built-in e-mail (from the windows)
A secondary problem, is that now, every program, INCLUDING the Opera browser, DOESNT find as an internet connection my wifi! meaning, although i connect nicely to the only source i could go online from my omnia, now thats gone too. In addition, where i think the problem with that one is, Under Wifi > Network Adapters > My network card connects to > there is NOTHING to select from.. how do i change this?
Pictures of the problem:
http://i258.photobucket.com/albums/hh246/e604005/Network.jpg
http://i258.photobucket.com/albums/hh246/e604005/Network1.jpg
http://i258.photobucket.com/albums/hh246/e604005/OmniaWireless.jpg
Thanx for your time reading.
-john
ok, an update, ive come to the conclusion that i *probably* need to restore some registry keys in order to make this god damned phone work at last.. anyone who can provide me with a cab probably? which can restore the previous settings? :S
dont make me format the phone again. please.
you could ring the provider and ask them to send you setting to your

Stop WinMobile establishing data-connections without asking

Hey mates!
First of all I wanna wish you a hapy new year
Ok, now to my question.
I've got a HTC Touch HD a week ago.
I recognized that it establishes a data-connection without asking me.
When i'm using Wifi - no problem.
But as I don't have a data-flat that gets quite expensive, if I can't use Wifi (most of the time no wifi available).
Is it possible to set up Winmobile so that it asks me BEFORE establishing an data connection?
I didn't find any solutions, google didn't help me, too.
Of yourse I could just change the adresses in the settings.
e.g- "internet.t-mobile.de" to "internet.t-mobile.deXXX" ---> no connection possible.
But i want to receive and send MMS at any time, so that would not be possible any more.
I hope you can help me, thx.
greetz
try nodata
this should do what you need....i think
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
thx, but not really what i need.
With this programm i still have to close connections by hand.
I just want WinMobile to ask me BEFORE it establishes a connection.
For example: When I open an programm which tries to download something, a popup should appear
--->
Establish data-connection?
[ ]Yes
[ ] NO
I hope u understand my problem
greetz
No one with the same problem here and a solutuon?
greetz
*Hope pushing is allowed after 2 days*
greetz
I have the same problem with my Touch 3G (Jade). Turning the Data Connection off in the Main Touchflow settings tab helps but doesn't stop it completely. The worst thing is that doesn't seem to download anything but just connecting is enough to start costing.
I spoke to HTC today and they gave me a solution to this problem. Go to Settings, Connections, Connections, Advanced and then Select Networks. There you should find a drop down tab with something like ******GPRS, where ****** is your network. Now now choose New and create a new connection name like "No GPRS" for example. Click OK.
You now have a title but no settings so when you select this one, the phone can't connect to the internet. It might attempt to connect but it won't go through. Don't worry about MMS as this uses a different set of settings and works perfectly (for me).
Hope this helps, Woolly.
Find what apps are creating the connection so you can prevent it. Spb Monitor should be able to show you that.
Using Modaco NoData (link given above) will just do the same saving your time (you don't have to create a fake connection set).
What schlitzohr1812 wants is a way to make WM ask for permission to connect. I haven't heard of anything like this, but if you assign a shortcut to NoData it's almost as easy as what you are looking for. By the way, despite the name, NoData will prevent WM from opening connections, not only to exchange data over them.
Just remember that if you disable the connection while it is already open, you still have to close it manually. Also beware that if in your Comm Manager you have an enabled "Data connection" button (on some phones it's always disabled when the connection is closed, on others it can be used to open it), that button WILL open a connection even if they are disabled.
Thx for helping guys, but "Black Antitoon" is right.
That's not exactly what I was searching for but better than nothing.
I'm used to my old nokia phone (N70) which asked me before.
Incomprehensible why Windows Mobile does not have such an option...
greetz Timo
anybody wrote an app for this data permission yet please?

Enable Bluetooth DUN on Sprint Touch Pro2!

This took me a while, but I finally figured it out through trial and error. I know there are a few options out there for tethering, but this has always been the preferred way to tether when I was using the Diamond. It's wireless, you can initiate the connection from the PC, and it gives you better battery life than WMWiFiRouter or HTC Wifi Sharing. Best of all, you DO NOT need to initiate a DATA connection on the phone before connecting to your PC! Just fire up the BT DUN connection on your PC, click Dial, then browse the web!
Here's how we do this:
Install DotFred's TaskManager
Click select Menu, Tab Options, Select Tab, Services. Find "CM Guardian", click and hold until menu pop up and select "Set Manual".
Make the following changes on your TP2 with a Registry editor:
1. [HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll"
2. [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
3. [HKEY_LOCAL_MACHINE\Software\OEM\Wmodem]
Check Profile=0
Connected=0
Multi-NAI=0
WModemDUN=0
4. [HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\DUNServ er\ControlPanel]
Enabled=1
That's it! Re-pair your TP2 to your PC and BT DUN should be available as one of the services. Create a new DUN profile on your PC, leave username and password blank, and set dial number as #777. Click dial and you should be able to connect... just like old times.
Thank you so much for posting this. I have been ripping my hair out over this. However, I am on Verizon and thus my HTC Touch Pro2 has somewhat different entries in the registry than Sprint does. Does anyone know how to get DUN working with the HTC Touch Pro2 on Verizon? I bought a laptop specifically with Bluetooth just to use my phone as the modem but cannot get it working for my life.
After I did all the registry edits I could that you mentioned (even though all of them were not available since I'm on a different provider) I noticed when I try to dial out for a SPLIT second I will see "Dial Up Networking" listed under Bluetooth services. Windows promptly gives me a dialing error and that service on my phone disappears.
Anyone can give any pointers?
I don't have a Service called "CM Guardian". I have a custom ROM, would that make a difference?
foldog22 said:
I don't have a Service called "CM Guardian". I have a custom ROM, would that make a difference?
Click to expand...
Click to collapse
Yes, some Rom chefs may have eliminated this service. I know MightyMike left it in his Rom, but I have not tested others on the TP2.
KD8FRE
Would this service be in WM6.5? If I download MightyMike's ROM would it be in there or is it only in WM6.1?
Thanks for this.
foldog22 said:
Would this service be in WM6.5? If I download MightyMike's ROM would it be in there or is it only in WM6.1?
Click to expand...
Click to collapse
MightyMike's Rom does indeed have CMGaurdian. I cannot speak for other TP2 Roms, but his does.
KD8FRE
Can anyone give any pointers on getting this to work on the Verizon version of the phone? Been searching high and low!
There is no "CMGaurdian" on my phone. I did a full search for it and it's nowhere to be found. I have the stock Windows Mobile 6.5 rom. But it looks like without being able to set that as manual, I have to change the registry everytime I end up having to restart my phone. But even when I do that, it still goes back to phone as modem after a few minutes instead of staying on Sprint.
Awesome!
Thanks for the info. The connection sharing wasn't working for me anyway.
Just an FYI, you can optionally edit the registery to set the CMGuardian to Manual.
Open a reg editor and navigate to [HKLM\Services\CMGuardian]
Locate the Index key and change the value from 2 (default) to 1.
So anyone on Sprint TP2 with 6.5 stock rom actually got Wmodem to work? I've spent about 24 hr trying just about everything with no luck so far.
I made all the above reg changes, have WModem v02 installed on my TP2. Activate the wmodem prog, connect to computer with usb cable. When i try to connect on my computer, it stucked on verifying user name and pass. There is some sort of data connection going on on the phone itself, but the computer connected to the phone couldn't seem to go pass that "verifying user name and pass"
Much appreciated any help or comment. Thanks
Just wanted to add that I found this thread useful, got the registry entries and made a cab for it. This is for Sprint only! Download, install, and go, no need for registry editing!
Problem tethering via Bluetooth DUN to pspgo
Ok, I am pulling MY hair out on my ATT tilt 2. I am trying to use my fone as a bluetooth modem for my pspgo.
It seems that my Tilt 2 receives the data from the pspgo, but its not sending any data to the pspgo, when I test the connection the tilt2 receives about 9-16 bytes, but it says sent: 0 bytes.
I have energyROM july 16 2010 WWE winmo 6.5
Manilla 2.5.20161332.0
Build: 23563.5.5.0
I have seen vids of people doing this on the Raphael (FUZE) and other phones
I keep getting this connection error on my psp: (8030000B) I have tried so many dial #'s, changing settings, PDAnet,
I think the problem has something to do with:
it being WinMo 6.5 or
The custom ROM has disabled something in the Bluetooth or
Since the ROM is custom, the psp wont recognize this for some reason because just like the WIFI router; the carrier doesn't know I'm tethering. or
I have the wrong Dial-up # or
Authentication settings or Initialization command is wrong or
I need to use a Proxy network
Some other reason ( The ROMS BT stack) whatever that is lol
Does anyone have this or similar problem? Or know whats happening here?
Any help would be awesome!
Thank you
Worked Perfectly
After making the changes you suggested, this worked perfectly on my TP2. It's so funny, after I initially got my TP2 and tried it, I instantly gave up. Now that I'm a month away from going to a new carrier, and most likely a Sony Ericsson Xperia X10, I got really interested in getting this working. It was a breeze using the Resco Explorer Demo with included Registry Editor.
TP2 Stock WM6.5
Doesnt work for me. I dont have CMGuardian.
I went ahead and edited the registry anyway and still didnt work even after rebooting.
I'm hoping someone can help figure this out... Trying to tether with my new Xoom!
Thanks a lot defcon6, I was looking for this some time ago, but no look, but know, looking for some other thing i found it, thanks again
Same here, stock 6.5 rom and no CMGuardian. Did you ever figure this out?
Never mind, I did run the cab from pengc99 and it worked fine. After soft reset of the phone, it never got out of the "modem negotiating" state but running the cab again fixed it. Now if I just could find the equivalent to CMGuradian I would be all set but this is at least working.
Bluetooth setting to ALWAYS ON?
Thanks to this thread and the pengc99 file, I successfully (quite some time ago) paired my TP2 via the bluetooth to a Nexus 7 tablet as well as an android phone, but each time I turn on the phone, I have to go through the following steps:
1. Select Communication Manager
2. Turn ON the Data Connection
2. Click on Bluetooth
3. Select one of my paired devices, such as the Nexus 7 by clicking the large "+" icon
4. Select Bluetooth Networking
5. Select the "Share Internet Connection" option
6. Click Continue on the bottom
I tried various registry edit searches here and on google, but cant' find any way to lessen these steps or preferably have the Bluetooth sharing set to ON at all times. If anyone knows how to simplify this process, please post the stops or file that will help us all.
Thanks in advance

Sprint Touch Pro2 Internet Sharing

Ok, so the data on the phone works... but if I try to tether it and share the internet to my laptop, I get a code 67 saying my username and/or password is incorrect... the thing is that the data works all the time except when tethering...
any idea on how to fix this?
thanks.
Apparently I can fix this error in EPST... however I cant get my MSL through any of the suggested methods... anyone know how to get the MSL from the touch pro2? its an MEID, but using a converted pESN doesn't work with GetSPC...
I am suddenly having the same issues also. I had this working just by installing the ICS and WModem Fix.CAB but then I did a hard reset and reinstalled the ICS and WModem Fix.CAB and now it doesn't work. Could this just be Sprint catching on?
why would you reinstall it? was it not working?
just download from thgis site the wifi software. it worked on my tp2 spri nt
Code:
1. Edit the following regestry entries.
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll" entry
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
2. Start the Internet Sharing application.
3. Hit Connect In the Internet Sharing application.
4. Connect the TP/TP2 to the Laptop/PC via USB
5. Done. No other applications needs to run on the PC/Laptop
Basically, you need to tether with "Sprint", not "Phone As Modem." Just tested this and it worked quite well. If you still are unable to connect, be sure you disconnect and reconnect the phone.
You might want to try to start a data connection manually first from Connection Manager. Then try to tether.
I had the same problem yesterday so i deleted
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll" entry
Click to expand...
Click to collapse
Now I don't get the code 67 thing when i start the modified ICS
Use the tp internet sharing fix.
I used the internet sharing fix from the touch pro 1 and it works well. U must make sure u allow dta connection from active sync on the pc...make sure it is turned on through comm mananger..should work like a charm
I have a TP2 now and tether with wmwifirouter. I have never had to do any editing/hacking of the reg or had any of the issues you describe but then I never tried to use ICS alone on TP2. My advice would be to download the free trial and see if that helps.
http://www.wmwifirouter.com/
I used to tether with my SPrint Mogul, first with just ICS in windows but had constant dropped connections. Then tried PDA net and had similar issues. I thought the newest PDAnet version might help so I purchased it but same issues. Still waiting for my refund.
Then I got wmwifirouter for my Mogul and it was like a beautiful dream. It worked 99.5% of the time. The difference in reliability between ICS and wmwifirouter or PDAnet + Activesync vs wifirouter cannot be overstated. Did I mention I really like wmwifirouter?
wmwifirouter doesn't depend on crappy Activesync on the PC side to function which may be part of the difference.
As for PDAnet, I used to save the error messages and email them to the company periodically. Eventually I ran out of hard drive space.
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=31 (state=8193)!
Connecting to your Device...
Dialup failed, error=797 (state=0)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=31 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Dialup failed, error=638 (state=2)!
Connecting to your Device...
Connecting to Data Network...
Dialup failed, error=638 (state=2)!
PDAnet connection failure 3039
PDAnet connection failure 3033
"cannot connect with the current connection settings. tap "settings" to change" after having been successfully connected for ~5 min
"cannot connect for an unknown reason" after having been successfully connected for ~5 min.
"make sure PDAnet is running on your phone" (it is)
PDAnet connection failure, error 3064
"network connection lost"
PDAnet connection failure 3033
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
PDAnet connection failure, error 3064
Simultaneous Voice and Data on CDMA?
jakert50 said:
Code:
1. Edit the following regestry entries.
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll" entry
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
2. Start the Internet Sharing application.
3. Hit Connect In the Internet Sharing application.
4. Connect the TP/TP2 to the Laptop/PC via USB
5. Done. No other applications needs to run on the PC/Laptop
Basically, you need to tether with "Sprint", not "Phone As Modem." Just tested this and it worked quite well. If you still are unable to connect, be sure you disconnect and reconnect the phone.
Click to expand...
Click to collapse
I did the above Reg Hack and now I can't get data while on the phone. Of course I can't remember if I could EVER get voice and data on CDMA as I just switched from GSM where that is possible.
I'm on Sprint and as soon as I use my phone the connection goes from an Ev to a 1x and it only switches back to Ev when I hang up. Is this normal or a result of the hack?
Thanks.
jonner said:
I did the above Reg Hack and now I can't get data while on the phone. Of course I can't remember if I could EVER get voice and data on CDMA as I just switched from GSM where that is possible.
I'm on Sprint and as soon as I use my phone the connection goes from an Ev to a 1x and it only switches back to Ev when I hang up. Is this normal or a result of the hack?
Thanks.
Click to expand...
Click to collapse
On CDMA you can't use data while on the phone. It's how CDMA works. It uses the same antenna/radio. So, nothing is wrong with your phone.
so this thread is confusing me. Are the instructions all you need or do I need to install something for standard internet sharing. Also, is this going through activsync? I have a mac and would like to use this (at rare times) on it. Is my only option a wifi program? Is there a bluetooth method?
I have done the registry hack and got tethering working, but upon a reset, the hack gets undone and the registry goes back to phone as modem. I am having to constantly change that key entry back to Sprint. Is no one else having this problem?
davea said:
I have done the registry hack and got tethering working, but upon a reset, the hack gets undone and the registry goes back to phone as modem. I am having to constantly change that key entry back to Sprint. Is no one else having this problem?
Click to expand...
Click to collapse
Install DotFred's TaskManager
Click select Menu, Tab Options, Select Tab, Services. Find "CM Guardian", click and hold until menu pop up and select "Set Manual".
Reboot
I posted more info here: http://forum.xda-developers.com/showthread.php?t=560865&highlight=enable
Why don't you just install the WiFi Sharing app... it works like a charm and you don't need to pay for internet sharing.
SOLVED
Ok, I had the same problem on my Sprint TP2. Here's the issue:
There is a program running that watches for you to change the "ForceCellConnection" registry key. It changes it back to "Phone as Modem" because Sprint REALLY wants you to pay $30/month for a tethering plan (despite the fact that your phone is capable of doing it for free).
The program running in the background is called "CMGuardian", and you'll find it in the registry under HKLM/Services/CMGuardian and HKLM/Services/CMGuaridan. (Note one is misspelled... probably on purpose by Sprint to keep people from searching the registry for it).
I set the DWORD key "Flags" to 4 in both keys and soft reset. This disabled CMGuardian (and frees up a lot of RAM too).
Next, you can edit the ForceCellConnection key and change it to Sprint permanently. ICS should now work. If you still get Error 67, establish a data connection first (open opera, or just go to conn manager and turn on data), then click Connect in ICS.
squishy2008 said:
Ok, I had the same problem on my Sprint TP2. Here's the issue:
There is a program running that watches for you to change the "ForceCellConnection" registry key. It changes it back to "Phone as Modem" because Sprint REALLY wants you to pay $30/month for a tethering plan (despite the fact that your phone is capable of doing it for free).
The program running in the background is called "CMGuardian", and you'll find it in the registry under HKLM/Services/CMGuardian and HKLM/Services/CMGuaridan. (Note one is misspelled... probably on purpose by Sprint to keep people from searching the registry for it).
I set the DWORD key "Flags" to 4 in both keys and soft reset. This disabled CMGuardian (and frees up a lot of RAM too).
Next, you can edit the ForceCellConnection key and change it to Sprint permanently. ICS should now work. If you still get Error 67, establish a data connection first (open opera, or just go to conn manager and turn on data), then click Connect in ICS.
Click to expand...
Click to collapse
So what all is CM Guardian doing? We don't really know if it's doing anything else or not. Are we sure we want to stop it if we don't know what all it does?
CM Guardian is a program that keeps certain things within factory specs for whatever reason..
as long as you dont screw something else up in the reg CmG wont even be needed..(i think its to prevent us from reg mods)
if you disable it, edit the reg for tether, soft reset.
open web browser, open internet sharing, click connect, then connect usb to pc to phone and it will work..
+1 for WMWiFiRouter!
Best money I've spent on something for my phone!
Try it at wmwifirouter.com

Sprint touch pro 2 tethering problem

hello, I recently purchased the tp2 and love it so far. I have done a number of tweaks to the phone with no issues except for the tethering one. I followed the instructions that are given to tether which included deleting and editing some registry entries but i am having an odd problem. When i go the the internet sharing program and i hit the connect button, nothing happens. the "connect" button goes gray for a couple of second the returns to white for me to press it again. the status says disconnected and never changes.
I tried a number of things such as:
1.soft reset
2.reinstalled the internet sharing and edited the reg again
3.opened a connection with my web browser first
from what i understand is that the next step after "connect" would be a prompt that says "connect your usb cable" or something like that.
Has anybody run into this problem? Can anybody give me any advise?
Thanks
Im using mine right now but Ive also had a few issues
Make sure your Data connection is active( in connections under settings) before you try to tether
Quote: "I followed the instructions that are given to tether which included deleting and editing some registry entries"
Question....where can I find these instructions....iv'e looked and can't find....THANKS!
HOW can I get Internet Sharing to work on my TP2
tp2 tethering
you dont need to make any registry changes for tethering to work. sprint doesn't see the data any differently(i have been streaming netflix through my phone to my laptop for a while). try a hard reset. with phone off hold power send call and end call buttons simultaneously until reset screen appears. follow instructions on the screen. also are you selecting phone as modem or sprint for the connection? be sure it is set to sprint. i ran into a similar issue and needed to call sprint to have them reset my data connection password and i updated profile afterwards and it worked fine. hope this helps.
I posted my tethering experience with Mogul and TP2 here.
http://forum.xda-developers.com/showthread.php?p=4623676#post4623676
the phone shutting down
I have tried the reg edit and it works for a while and then the phone will just power off like a soft reset.Has anyone have this issue and anyone have solutions
Thank you
I found it easiest to use the XDA-Tom Codon wifi cab for tethering. It enables you to use your phone as a wireless router for your computer and Sprint cannot see it. It works very well for me and its very fast, the only downfall is it runs your battery down considerably.....
jmt3z4 said:
I found it easiest to use the XDA-Tom Codon wifi cab for tethering. It enables you to use your phone as a wireless router for your computer and Sprint cannot see it. It works very well for me and its very fast, the only downfall is it runs your battery down considerably.....
Click to expand...
Click to collapse
i installed that cab and couldn't find anywhere to turn it on or set anything. where did u find it after installing?
EDIT: oops, found it by pressing the "all settings" softkey to get to the real WM control panel rather than the prettified touchflo interface.
Tethering vs WIFI use
Hi All,
First time poster here.
I have a new HTC TP2 on Sprint and love the phone. But when it comes to tethering, I have a few questions.
I finally got "Internet Sharing FIX" to work. It took a few connects of the cable to start it working.
When I installed "XDA-Tom_Codon CM Wifi Internet Sharing VGA" it seems to work but the data connection keeps dropping. Soft resets do nothing. A hard reset worked. But again after install the Internet Shareing FIX then Tom's WIFI sharing, the issue reappeared again.
It seems like these 2 cannot exist together on the phone. Is this true?
try this
install these: in order as posted make sure to soft reset after each cab
my bad here you go:
i2nd2none said:
my bad here you go:
Click to expand...
Click to collapse
Thanks i2nd2none. I'll give that a try.
I was using
1. Internet Sharing FIX.cab
2. XDA-Tom_Codon CM Wifi Internet Sharing VGA.cab
in that order.
ur welcome let me know if it worked..
osiris12 said:
Thanks i2nd2none. I'll give that a try.
I was using
1. Internet Sharing FIX.cab
2. XDA-Tom_Codon CM Wifi Internet Sharing VGA.cab
in that order.
Click to expand...
Click to collapse
Which rom are you using? With a custom rom, does one experience these problems? I'd like to tether directly rather than wifi sharing. Does one do this with a custom rom and the above applications installed?
I am current using WiFi sharing on my TP2 with no problems from my home computer or iPod Touch but it doesn't work with my work computer due to it being locked down. :-(
If In install these three programs witll it allow me to direct connect via a USB cable?
Thnx.
I'm able to use ICS on windows vista via USB connection, but not for windows 7. Does the above fix solve the problem? (i'm using mightymike's rom)

Categories

Resources