Hi
Before i flash my device to a rom from here i was jsut wondereing where i could find the data settings for o2 uk, i have found several posts on it http://forum.xda-developers.com/viewtopic.php?t=13498 but the post is very old and i am not sure if the setting are still the same or if it will still work properly!
thanks for the help in advance
You could always try the O2 site to send the settings to your phone after you've flashed your ROM.
http://getsettings.o2.co.uk/ServeSettingsWebApp/
Or you could use the settings from this posting here. It'll work for any WinMo device on O2.
http://forum.xda-developers.com/showpost.php?p=1200467&postcount=9
Related
Cannot use O2 Connect after upgraded to ROM 1.06, pls help !
Any expert can help me with ? Thanks a lot !
You can still use back O2 Connect. Just need to reinstall few of the O2 crap from your old Extended ROM. Had done that on mine, and now able to connect to O2 plus able to run O2 Plus without problem. Off hand I can't recall the exact .CAB file you need to install back. Just give it a try, install 1those .CAB file one after another and test the connection to O2. I didn't note down the exact step previously, thus can't give you the detail steps as how I manage to get it done on mine. Just damn lazy to do a hard reset and start from scratch again.
Oh, great, I will give it a try. Thanks a lot.
But I would also like to know, did you backup your original rom? If so, can I get a copy from you? I didn't back it up, and I found regret about it. Thanks !
Hello,
I have a similar problem. I think it was because I forgot to patch the operator code. Can anybody tell me the operator code of O2 xdaII mini?
Many thanks in advance!
i all,
i need to know how old my software is i have:
rom:1.0.7.0
operator:1.6.312.4
radio:4.0.13.17_01.04.00
on a qtek 8300...
is there any newer version? language and t9 in portuguese ?
thanks...
ur software is very old, rom 1.0.70 is old, you should be at least on 2.0.x.0
login to myqtek.com and get the upgrade!
wow...
thanks, i've already try that, but it says my imei in not valid.
my mobile came from dangaard, but i'm from portugal... i send a mail to the place where i bought the phone and they said it was from dangaard!
Dude, that rom is old. Here is a link to download Dangaard/qtek rom version 2.0.9.0 for qtek 8300.
http://rapidshare.com/files/25367924..._Ship.zip.html
many thanks for that.... bu i'm getting file not found on rapidshare...
one more question... will i have portuguese language on menus and on t9?
many thanks
Paulo Fernandes
Sorry, I guess that link expired. I have reposted to rapidshare, and here is the new link:
http://rapidshare.com/files/27726683/TO_DAN_NOR_2090_263111_020900_Ship.zip.html
I don't think that Portugese t9 is available on this rom. But I have attached a cab file (from [[cold]]) that is supposed to install portugese t9.
good luck.
no luck
well it seems that this phone is not from dangaard...
i got the "invalid vendor id" error... what should i do?
application unlock and super CID unlock. search forums for methods, but let me know if you are stuck.
but my phone is not sim lock...and i'm able to install all the apps that i've tryed...i cant't find the cid unlock, could you give me the link...
sorry to be asking all this but i just e wanna be shore that i do things the right way... this phone is 1 week old :|
Well, you're able to install anything you have tried, except the ROM upgrade
SIM unlocked is different than application unlock and CID. Be warned that CID unlock will invalidate your warranty, probably new ROM also will. But the new ROM is worth it, imho. Here is a nice guide describing unlocking/upgrading procedures for 8310, which will also work for 8300:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
well i haven't think about the warranty... what would be the main benefits of the upgrade?
battery? signal strength ? software?
well, the main advantage that I like is being able to use a2dp (wireless stereo), radio upgrades, but others like push email and other stuff. I guess if you are happy w/ your old ROM there is no sense in changing it.
well my main problem is the battery ... it last 2 days. and wi-fi connection to wpa networks
my battery life is about 4-5 days, and I use wifi quite often on secure and wpa networks without problems.
follow the instructions given here and nothing can go wrong:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
robsahm said:
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
Yep! Just HardSPL, and then select an English ROM (most are) and flash.
Read the Sticky in this forum for guide lines on how to flash, and common problems and thier solutions.
http://forum.xda-developers.com/showpost.php?p=1846653&postcount=800
Go there and READ and READ. (Read the Wiki first). You will find all your solution there. Everything you need explained over there.
I will describe the procedures you will need:
1. Back up your stuff
2. Charge up your phone to 100% and connect to your pc with usb make sure ActiveSyn can see your phone
3. CID or SIM unlock your phone first if it is necessary then.
4. HardSPL your phone (You can find the information in the Wiki)
- If you encounter White Screen Problem, check the HardSPL White Screen
Issue - Solved!
5. Find a Rom that you like
6. Find the radio rom that rom supports
7. Flash the rom
8. Do a HARD RESET when you see the "Tab the screen to setup windows mobile..."
9. Flash the radio rom
10. You are DONE!!!!!!!
As long as it's GSM band, then it should all work. You might have to manually setup the 3G network for Germany on your phone.
Thanks for the feedback! My main concern was not knowing if it would work with my carrier after I do the ROM.
However the 3G network is a BIG deal 3G is soooo much faster than GSM. Is it even possible to manually setup the network afterwards?
Thanks again, you have been great!
you can always setup your 3G network manually afterwards. It's just a different rom version. It's like you install English version of Winxp on your PC instead of the German version. You can still setup your wireless connection for your PC.
Sine you are in Europe, I would suggest you use Dutty's WM6.1 Rom (The bluetooth has a bit of issue - not able to receive file transfer, but he's working on the RTM version with the fix). Dutty's rom is cooked based on the Vodafone rom (He's in England), so I would suppose there should be pre-set 3G setting for Germany as well.
Hi everybody!
i own a Raphael and have flashed different roms with WM 6.5 on it. I allways have to flash back to the stockrom because the Textmessages i write could not be send...
The Messagecentral is not the Problem and in Europe we musst use GSM.
I have no idea where else to search or what option to change.
If somebody could please help me?!
My Carrier is T-Mobile and iam from Germany.
in the phone settings one can suppy the sms nr the device should use if your rom got a wrong one in there that could be the problem I would try and find out what it should be and change it myself
The Problem is not the Messagecentralnumber under Phone/services!
Thats the right one!
If tried with +49 and 0049...
The Number is: +491710760000
If i search on the internet it looks like the T-Mobile SMS-Central Number!
I tried to use GSM Prefert and GPRS... Its allway: the message could not be send....
hi there ive had my s6 for a little while now ,, running on giffgaff
all of a sudden its gone to emergency calls only wont register on any network ,,,
except voda and ee which dosnt help lol as I'm on giffgaff and more recently id network which runs on 3 ,,,
Factory reset!
further help
Indranuj Kar said:
Factory reset!
Click to expand...
Click to collapse
I have tried that already but in the mean time ive found out that o2 have blacklisted and the person I got it off as blocked me <<<<<typical <<<<< can I change the imei number at all
Well.. it seems like it's been stolen. Maybe not by You, but by the previous "owner". Try reflashing stock rom from sammobile using odin and if that doesn't work, contact o2 and maybe they will figure something out. If You got the box and papers they will most likely help You. And no, You can't change imei (even if it was, it would be illegal). So try odin and contact o2.
Also wrong place for that thread. There's helping section and this is general section.