Cannot use O2 Connect after upgraded to ROM 1.06, pls help !
Any expert can help me with ? Thanks a lot !
You can still use back O2 Connect. Just need to reinstall few of the O2 crap from your old Extended ROM. Had done that on mine, and now able to connect to O2 plus able to run O2 Plus without problem. Off hand I can't recall the exact .CAB file you need to install back. Just give it a try, install 1those .CAB file one after another and test the connection to O2. I didn't note down the exact step previously, thus can't give you the detail steps as how I manage to get it done on mine. Just damn lazy to do a hard reset and start from scratch again.
Oh, great, I will give it a try. Thanks a lot.
But I would also like to know, did you backup your original rom? If so, can I get a copy from you? I didn't back it up, and I found regret about it. Thanks !
Hello,
I have a similar problem. I think it was because I forgot to patch the operator code. Can anybody tell me the operator code of O2 xdaII mini?
Many thanks in advance!
Related
Hey guys,
I tried the WWE-ROM with BigStorage now, but I just want to go back to the original TMO Germany ROM, cuz I don't have big advantages of it but I lose my warranty...
Now my Problem:
Upgrading to WWE was just easy as described in the Procedure.doc on the ftp. But what do I have to do to get the original ROM back?
I saved it as a German.nb1. D I have to use ntrw write German.nb1 h: ? (h: is my sd-card-slot)
That way it doesnt work, the Bootloader doesnt even recognize the ROM. When I backup my WWE-ROM to the SD-card and the use that ntrw command from above, the ROM is recognized, but after having updated it, I can't bot anymore.
Hope anybody can help
greetz Stefan
Shipped rom?
Hi Stefan,
Seems like there's something wrong with your original rom-dump. Had it myself & it's a pain in the ***. Why not download the original German TMO shipped-rom & try it with the normal usb upgrade method?
Since your magician won't boot the software will probably tell you're upgrading from version blank, but that's no problem it will work. just put it into bootloader, connect usb & start the update program.
Success, M
seems to work, I'm just upgrading it, just had to put it in bootloader-mode again and start the update-utility from t-mobile.de...
will report if it really worked later on
Hi! you would do me a great favour by putting the rom on the ftp! i would really need it!
Please!
are you from germany or from austria?
greets
I don't need to upload it, its not even the most recent version (my original ROM was never, but I didn't find the original from TMO in a newer version :-( )
Just download it from t-mobile.de, I'm from Germany anyway...
greetz Stefan
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
I upgraded my Sprint PPC6700 to the windows mobile 6.0 apache rom file i found on this site. Now sprint can't get the telephone working on it and neither can i. They can't get to some hidden menu via the dial pad that lets them change some settings. IDoes anyone know what needs to be done? Also if not, can anyone give me a link to the orginal sprint rom so that i may downgrade my phone back to WM5 with working phone functions. Thank you very much in advance.
mec0902 said:
I upgraded my Sprint PPC6700 to the windows mobile 6.0 apache rom file i found on this site. Now sprint can't get the telephone working on it and neither can i. They can't get to some hidden menu via the dial pad that lets them change some settings. IDoes anyone know what needs to be done? Also if not, can anyone give me a link to the orginal sprint rom so that i may downgrade my phone back to WM5 with working phone functions. Thank you very much in advance.
Click to expand...
Click to collapse
Are you familiar with flashing your phone? Make sure and read the directions in full before you flash. Here is the link to your original rom.
I had the same problem you have. You have lost your radio. Download the one that says AKU2.0 software. I hope it works for you.
http://www.utstar.com/pcd/phone_downloads.aspx?bid=30&cid=2&mid=61&carrier=Sprint
Hi.
I bought a MDA pro (qtek 9000 etc)./
But it is totally messed up by the previous owner. I tried to install windows mobile english (it has windows mobile 6.1 german). But it says it isnt the right software for the device. And the phone function doesnt work.
Can someone please help me with how i can make my phone function work and change the language to english (german is the only installed version).
Specs:
3G
Unlocked.
Please, who can help me???
Dominick
this post here:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
Is the easiest way to learn what your doing to flash a new WWE Rom,
Thank you,
I have a english version now (yEAH!!!!)
But i still have the error NO GSM. (but other numbers on the screen: d 2.61 29 wwe
Who is familiair with the error and knows a solution?
ERROR 114?
Do you receive a "error 114" when loading a radio ROM? I've had the "NO GSM", "ERROR 114" since 2005 on my XDA Exec. Unfortunately, I have yet to find a solution. There is some info. on this error that can be found, but not much, and no success stories...SORRY...However, I'd be forever grateful if you did discover a fix and I'm sure others would be too; if you shared it. Good Luck!!
u can ask for a solution through MTTY .. maybe someone can help u format the radio rom and reflash it or something
i'm no expert, but i think some expert can give u a code to use in MTTY to do that
Hi,
I would like to thanks everybody for his or hers help.
But i filed a complaint where i bought it and i could bring it back and i recieved my money back.
So i think this thread is ready for closing
Hi,
I need some help in changing the device ID of my T-Mobile MDA Vario IV.
It's unlocked and contains the newest HTC Firmware of the TouchPro.
Now my problem:
I installed a try&buy version of a programm a few moths ago when I got the brand new MDA, containing the T-Mobile Firmware.
The programm didn't work but the first time it got started, it connected to the internet and submitted my device ID.
Now, after re-flashing the device, I wanted to try this tool again and now it prints about an already registered device id.
What I'd like to do now, is change the device ID and replace it, so I can retry the installation again.
Do you guys think it's possible to do this ?
And if yes, would you please be so kind to explain it to me
At least I'd like to saysorry about my worse german-school-english, I hope you could find out, what I've been typing about !
Thanks in advance,
yaka
yakazaa said:
Hi,
I need some help in changing the device ID of my T-Mobile MDA Vario IV.
It's unlocked and contains the newest HTC Firmware of the TouchPro.
Now my problem:
I installed a try&buy version of a programm a few moths ago when I got the brand new MDA, containing the T-Mobile Firmware.
The programm didn't work but the first time it got started, it connected to the internet and submitted my device ID.
Now, after re-flashing the device, I wanted to try this tool again and now it prints about an already registered device id.
What I'd like to do now, is change the device ID and replace it, so I can retry the installation again.
Do you guys think it's possible to do this ?
And if yes, would you please be so kind to explain it to me
At least I'd like to saysorry about my worse german-school-english, I hope you could find out, what I've been typing about !
Thanks in advance,
yaka
Click to expand...
Click to collapse
Contact the software vendor with your issue, they should be able to get you up and running.
If by device ID you mean your IMEI#, you can't change it.