hello all
ive just tried to put a new rom on my phone but it failed
wen itsplugged in it just says USB v.1.06 and when its unplugged it just says serial
ive tried hard reset , taking battery out and failed to make it work
PLEASE HELP NOW!!!!!
i have the same problem
i have a french XDA2 and wanted to change to english
pls help
I have an exactly same problem and do not know how to fix it. I have Jasjar and waiting for i-Mate reply.
have you guys run the install again as that happened to me as well and all i had to do ws restart the process and it worked
yes but all i got is Country ID error
i tried several Rom in English, Fench, german and dutch but no luck
any help is welcome
i found it
i used the Hery Mod.A flashfile and its working great now
How did you do? Can you tell me more in detail?
u have PM
Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
Hi mates i have imate jama 201.....
stuck on after few moments
saajith said:
Hi mates i have imate jama 201.....
stuck on after few moments
Click to expand...
Click to collapse
What do you mean? Does it sometimes stuck?
white screen
i wrongly flashed the imate jama201 with jama_8050_wwe_rus_wm6 bu sd card method.
phone was not flashed only boolder or something was came at the time of flashing after that its white light only.
and i am not able to find any sutable rom for my phone please help me to recover my phone or give any rom link for the same
ayeah said:
i wrongly flashed the imate jama201 with jama_8050_wwe_rus_wm6 bu sd card method.
phone was not flashed only boolder or something was came at the time of flashing after that its white light only.
and i am not able to find any sutable rom for my phone please help me to recover my phone or give any rom link for the same
Click to expand...
Click to collapse
Doesn't this phone has a specific forum http://forum.xda-developers.com/forumdisplay.php?f=245. If this is the one, you should go there and have a in-depth reading to see how to solve this problem
i mate jama 201 need help for unlock
i have i mate jama 201 with out sim it is asking on display (this device is locked. enter your device password and click unlock.to make an emerganse call click menu)
pls need some solution for this problem
Hello i fu***d up.
I placed POLAIMG.NBH on my sd card and rebooted.
now everything is stuck.
i had 3lit3_viii_full_wwe on it before i ****ed up.
I want android but im a noob and need help to fiks this.
Peet.
Everithing is stuck ??? whats happen when you put the phoon on ? (and no sd card) ? ... 3 color screen or sommething els ? Try to do the hard reset and see what happens. Maby you have luck and WinMobile works again.
Whit Android y never testet because its me to tricky and y have read that there are som problems whit apps in it, so y leave it for what it is and hope somday have a new phoone and than its don for a while whit flashing a hope.
People here whit Android experientse can help you but you have to discribe what happens and when its happens. Succes Reindje.
Hello,
I have a problem with HTC ONE MINI PO58200
The phone was lying long.
When it boots, it displays Bootloader. No recovery option does not work (restarted)
What can I do?
Please help.
Regards.
Same here, tried unlock bootloader thru THCdev, fastboot says successful ,OK, but phone does not get the next screen, for unlocking. Tried 100 times.
I have RUU and ZIP, but when device reboot after 20 seconds RUU crashes. In log file says:
The input file() DOES NOT exist
Any other suggestions here ?
There are so many HTC with such problem, pls guys anyone help ?? Thanks !
same probleme
I have the same probleme.
itries many methode on internet it doesnt works.
i think you need the original firmeware. mine is from Uk. so there is on htcdev.com kernel files but how to upload it on the phone ?