Related
does anyone know of a program to perform multiple actions or launch multiple apps?
i want something which would allow me to create a exe file (which i can put in start menu or assign to a button) which will complete several actions after being selected.
such as: wifi on, launch ie or bluetooth on, launch wmp or close all, power off... etc,
you get the idea i hope
mortscript
Midget_1990 said:
mortscript
Click to expand...
Click to collapse
i should have expected that but thanks
however, i was hoping for something with a ui, and without a 60 page manual which looks to complicated for me on the first contents page
i guess i'll have to start reading the accumulation thread and manual a lot
Hi and thanks guys,
I finally started using mortscript, it's actually very simple to use (at least for what i want) it just looks very difficult to use when you read the site and the manual. Though it did take me all of today to work out why i could not get vjvolubilis to work (i missed a "," out ) and a while to create .mscr instead of .txt.
But it's a shame it only supports system, and not ring volume changing.
I love this site - every time i think my ppc is as good as i can get it, something else pops up to make it better
i got my vox a month ago and i love the design. probably the only smartphone design out there that looks as good as it does. But the problem i'm having with it is the performance level...i've had it lock up on me, sometimes it takes forever to load a simple task such as my text messages. I love the phone design to death, is there a phone that keeps this slick design but performs just as well? I know htc released a s730, but really? lol come on, its bigger, contains the same amount of ram, faster processor but still...
Or is it time i move to a pocket pc? do they perform better than smartphones? Or am i looking at this entirely from the wrong view, is it windows mobile thats causing this? is there away i could change the OS installed, maybe like the OS pocketpc's run? I'm not new to all this, but I would like some input and what everyones feeling, or if anyone is feeling the way I am. thanks again guys, looking forward to your responses
p.s. if you have any recommendations on devices i should look at, please let me know cause I might start looking for something new
One solution is to overclock your vox.
For me is very frustrating, slow opening of new SMS, too!
I don't know any other way to speed up your device.
matrix77 said:
One solution is to overclock your vox.
For me is very frustrating, slow opening of new SMS, too!
I don't know any other way to speed up your device.
Click to expand...
Click to collapse
ya i have it overclocked to 252 mhz, there is a improvement but why does it take so long to send a sms? not to mention the amount of steps that need to be taken to do so, open messaging, text messages, new, have to open contact list (which takes a while) then select a contact, select their mobile number, hit enter, then finally start typing.
I was looking at the iphone, and some reviews off youtube, the phone seems really responsive and fast, anyone with any suggestions? wondering if that might be a good step up?
You can start typing the name you want to write to on homescreen so the contact shows up. Then with left/right arrows select SMS, when you open it it goes directly to sending a SMS to this contact, same applies to the phone book and it will stay that way.
frauhottelmann said:
You can start typing the name you want to write to on homescreen so the contact shows up. Then with left/right arrows select SMS, when you open it it goes directly to sending a SMS to this contact, same applies to the phone book and it will stay that way.
Click to expand...
Click to collapse
wow that is alot faster! didnt know that, makes texting a whole lot faster. guess i've been doing it the long way, hence the bitter taste its left. question, is windows mobile operating system more efficient than what the pocketpcs have installed?
For me that's really the most interesting thing in the iPhone, the fact that its interface is so fluid, everything seem to load fast . It seems really less frustrating to use. The only problem for me is that it is not as easy to tweak it as is windows mobile. Too bad windows mobile 7 still is a long time ahead..
But at least Windows Mobile 6.1 is due for the first quarter 08, let's hope that it will bring some improvements!
The thing about the MacOS X and the iPhone is that it's only designed for a couple devices, so it's very customized for these. Windows and Windows Mobile is made for thousands of different machines, so problems are just inevitable.
Speed improvements would be great indeed But my hopes are not very high
Dr. Martin Gonzo said:
Speed improvements would be great indeed But my hopes are not very high
Click to expand...
Click to collapse
i think we've peaked in terms of performance and speed with the vox, the iphone GUI is amazing not to mention how flawlessy it flows from one application to another. Only thing I can give iphone a hard time for is it doenst seem homebrew friendly.
So that being said, would you guys recommend/suggest a vox ->iphone upgrade? or just stick with the vox?
Sick with the Vox and try the lates official HTC ROM, it's available on the XDA-developers ftp site. I fashed my Vox to it yesterday and it is alot faster than the original Vox ROM and is slightly smaller aswell leaving more RAM free to install apps like facade and PhoneAlarm.
Roland
I also didn't like how long it took to open messaging and start a new text message. Its the main reason I overclocked my s710. Here's a couple of other things that I came across while trying to improve messaging speed. Working in combination, they made a huge difference for me:
1. overclocked to 252mhz
2. place a shortcut in your \windows\startup folder with the following commands:
58#"\Program Files\load.exe" -hide "\Windows\tmail.exe"
81#"\Program Files\load.exe" -hide "\Windows\tmail.exe" -service "SMS" -to ""-body""
Opens the messaging app in the background on startup. Opens a new blank text message on startup. Requires load.exe to be able to open in the background. Since it is already open in the background, you can access messaging instantly. Whatever method you choose to open a new text message will also be faster since their is already a blank open text message in the background.
3. I like the method mentioned above of typing the contact then selecting Send Text Message. Another method that is just as fast is to create a shortcut to your blank open text message and place it in your Program Files folder (or wherever, I have mine as a shortcut in my facade launcher bar). The shortcut contains the same new text message command as above (just without using load.exe to hide it in the background):
49#"\Windows\tmail.exe" -service "SMS" -to ""-body""
Opening this brings you directly to your blank text message, just select your contact and start typing.
Hope this helps!
wow! god thats amazing, loads instantly :|! and its even more amazing that your a junior member, did you read this somewhere? if not, cudos to you, thanks a lot loving that small tweak ALOT! appreciate it. hopefully more people read this.
Wish there was a program that ran more tweaks to help smartphones performance
After figuring out tmail.exe was the messaging app, I kinda just played around with that and load.exe (found in "how to pimp your s710" thread on Modaco.com) to see what would happen. After that I came accross that command to open a new blank text message on some random tweaks page. Had to try it out with load.exe too. Glad I did . Simple stuff can make a big difference. My last phone was a simple Nokia 6133 flip, and I could access text messaging or a new text message within a second of opening the phone...not really that important, but I wanted that streamlined access to messaging with the s710. I think these little tweaks make it pretty close.
i've created the shortcut, but for some reason it doens't load....my question is when i tried to run tmail manually from file explorer it loads up the messaging center, and not straight into text messages (option 1 of the text messaging center). now i was curious if theres a way we can get text messaging loaded directly
now I get what you were saying in your PM, you want to go directly to the text messaging section of tmail.exe. Try this:
35#"\Windows\tmail.exe" -service "SMS"
Put this in a shortcut. When you open it, it should take you to your text messages.
spiralinfusion said:
now I get what you were saying in your PM, you want to go directly to the text messaging section of tmail.exe. Try this:
35#"\Windows\tmail.exe" -service "SMS"
Put this in a shortcut. When you open it, it should take you to your text messages.
Click to expand...
Click to collapse
perfect thanks , will try it and let you know. thanks again
Hello,
I am a new AT&T Fuze owner and new in general to Windows Mobile "Professional". (Had a Symbian 60 Device Previously) I have been doing extensive reading and researching to figure out how to accomplish my goals but I keep running into dead ends. I have been searching forums and Google but I find that most information is formatted for people that have been in the community for a long time and understand all of the jargon. There seems to be so many flavors of windows and platforms that it makes my head spin and I also find that words like Smartphone, Pocket PC, Window CE, etc.. are thrown around very loosely.
Sorry for the preamble. Here is what I know so far.
Device = AT&T Fuze
CE OS 5.2.19971 (Build 19971.1.2.6)
CID = HTC_P4600 (Not listed in the WIKI here)
ROM = 1.95.502..5 WWE (10/20/08)
Radio = 1.02.25.32
Protocol = 52.39c.25.22h
First I was wondering if there was a positive way of knowing if a certain piece of software will work with my device and what that spec would be. Like does it go by windows version, phone version, both? Or at least some general rules of thumb what to take note of before trying a piece of software. (If it was designed for or works on other flavors of Raphael is it safe to try?)
My biggest problem at the moment is I can't seem to install anything anymore. I am getting a message about unsigned cabs or files missing. I'm hoping this wasn't something I did but it's a possibility. Some software "PPCPimBackup.exe" will still install but most won't like "Advanced_Configuration_Tool_v3.3.cab". I even tried to make a simple .cab using CeRegEditor to adjust the city string for the weather tab in TF3D. Any help here would be most appreciated. I am very weary of all these so called "unlockers" out there and even read a thread here where someone bricked their device by installing the wrong software for the device.
Is the Fuze the same as the Diamond? (They look identical)
What is the preferred way to back up the entire device or is it even possible with standard software? Most of what I found backs up PIM info.
When a program (Taskmanager 3.1) says to minimize, where does it go? How do you bring it back to the foreground or do you have to install a taskbar manager?
I actually have more I want to ask but that probably wouldn't be prudent. I think if I could help myself better once I understand what software I can and can't use with my phone.
Many thanks in advance and apologize for noobing up your forum =P
Eidolen
I'll try to answer some of your questions.
1) Normally, software will say windows mobile 5 or 6 as a requirement along with maybe .Net Framework. If it's for Windows Mobile most likely it'll work. Just have to try it and see.
2) Your programs are probably not installing because you may not have the required .Net Framework. I know Advance Config requires .Net Framework 3.5. So if you don't have it, install it. You can find it here or from Microsoft's website. You need the Windows CE or Compact version.
3) The Fuze is similar to the Diamond but don't go trying to install ROMs that are made for the Diamond. Use the ones in the Raphael forums.
4) If you want to backup your entire device, use a program such as Sprite Backup. This will make a full backup of entire system excluding ROM. However, if you want to do a restore, you need to make sure you have the same ROM installed, if not, it will create a lot of problems.
5) With TaskManager, when you minimize it just continues to run in the background. Program is still loaded and taking up memory/etc. Similar to when you minimize something in Windows. To bring it back, you can view the TaskManager and restore to foreground.
Hope that helps somewhat.
Wow,
Thanks you for the quick and non condescending reply. I've been surfing more since I posted and hopefully I could get you to elaborate on a few things.
2) Your programs are probably not installing because you may not have the required .Net Framework. I know Advance Config requires .Net Framework 3.5. So if you don't have it, install it. You can find it here or from Microsoft's website. You need the Windows CE or Compact version.
Click to expand...
Click to collapse
I did the .Net install and it went without a hitch but still no joy. I noticed on the authors support forums that others are having the same problem but no clear solution has been posted. /Sigh
I was thinking I needed to follow a procedure similar to the one listed here where you have to install a certificate and make some policy changes in the registry but since I can't find any info specifically for the Fuze I haven't done anything yet other than download the certificate that was linked in that post.
I should mention I am not a complete computer illiterate, and am fully comfortable with the registry and even more advanced techniques if necessary. I should also mention that I don't plan on replacing my rom at all. Just want to keep it to basic reg hacks, software installs, and some theming once I get things working the way I want.
I did already change one registry policy key (0000101a) to "1" from a thread I found on these forums, as it is something easily changed back but of course it did not help.
4) If you want to backup your entire device, use a program such as Sprite Backup. This will make a full backup of entire system excluding ROM. However, if you want to do a restore, you need to make sure you have the same ROM installed, if not, it will create a lot of problems.
Click to expand...
Click to collapse
Thanks, I will check this out. Sounds like exactly what I was looking for.
5) With TaskManager, when you minimize it just continues to run in the background. Program is still loaded and taking up memory/etc. Similar to when you minimize something in Windows. To bring it back, you can view the TaskManager and restore to foreground.
Click to expand...
Click to collapse
I understand what you said but what I was trying to figure out is how to recall it from the background. It doesn't show up in the TF3D task list when it's minimized so I was wondering if you had to click on the task bar or do some certain trick to bring it to the fore-front. The ability to move between programs easily is my biggest gripe so far as I seem to have to open and close the keyboard, hit home or back a lot to move around. I would love the ability to hit some hot key or some secret spot on the screen to launch taskmanager and then I could use it to go to whatever program I wanted.
I have seen a few bugs in TM_3.1 that cause crashes, but it is an awesome program and hopefully the developer will keep working out the bugs. If there is another program you would recommend that accomplished the same type of functionality I'd be interested in trying it out.
Thanks again for your friendly help.
Eidolen
Just looked at the contents of that cab referenced from that link I posted. It is just a Setup.xml file with the following contents.
<wap-provisioningdoc>
<characteristic type="SecurityPolicy">
<parm name="4119" value="144"/>
</characteristic>
</wap-provisioningdoc>
Any thoughts?
As for .Net, the following is from Modaco, and I found that it worked like a charm:
How to install and use .NET Compact Framework 3.5
If you're a developer or have knowledge of .net Compact Framework, you'll be aware that version 3.5 has shipped. You'll be aware that it offers a number of enhancements in features, stability and performance, and you'll likely also know that it provides full backwards compatability with previous versions of the Compact Framework. What you may NOT know is that when CF 3.5 is installed on a device, applications that target previous versions of the Compact Framework will continue to run against the old versions, and 3.5 and previous versions will live side by side on the device. Only when new devices come along will we see ONLY 3.5 on a device.
This presents a number of problems, namely
• Users who deploy CF 3.5 to their device but use applications targeting older versions will not benefit from the 3.5 performance improvements
• Developers who develop apps for pre CF 3.5 frameworks cannot easily test their applications ready for when 3.5 only devices come along
Thankfully, help is at hand in the form of a little known Compact Framework 3.5 powertoy named '.Net Configuration'. The application, which is available at Microsoft, provides the user with full granularity of control over the .net CF on their device. You can see installed versions, change the used CF version for a particular application or change the used CF version for all applications run on your device! Perfect!
Sadly in Microsoft's infinite wisdom the application in question is tucked away in simple EXE inside the 6.2MB download and somewhat hard to find, so i've taken the liberty of packaging it up into a CAB here that installs it with it's own Start Menu shortcut.
- Run '.Net Configuration' from your Start Menu
- Navigate to the 'Device Policy' tab and select version 3.5
- Select 'Apply' then 'OK'
That's it, you're done!
Thanks kindly but I'm guessing now that myself or a piece of software I've installed has borked my ability to install software. It seems I can install exe files but no cabs, including the one you posted will install.
As I've stated I have not made any attempts to unlock anything yet but have installed some software and made some registry tweaks. I wish I could see what exactly is happening like Procmon does for windows to pinpoint the problem, but I might just have to resort to a hard reset if I can't figure it out.
I'm open to any ideas but if I don't figure it out tonight I guess I'll reset tomorrow. Thanks for the guidance and help.
Cheers,
Eidolen
@eidolen
You have a SD card?
Gimme some time and I write you a little 101 how to deal with the Fuze.
eidolen said:
Thanks kindly but I'm guessing now that myself or a piece of software I've installed has borked my ability to install software. It seems I can install exe files but no cabs, including the one you posted will install.
Click to expand...
Click to collapse
eidolen said:
I did already change one registry policy key (0000101a) to "1" from a thread I found on these forums, as it is something easily changed back but of course it did not help.
Click to expand...
Click to collapse
You might want to double-check that registry hack to make sure it's correct. Seems like a big coincidence that the one registry hack you've made so far is to allow unsigned cabs to install and the biggest problem you seem to be having is that you can't get unsigned cabs to install....
eidolen
You have a SD card?
Gimme some time and I write you a little 101 how to deal with the Fuze.
Click to expand...
Click to collapse
I ordered my SD card yesterday =/ Hopefully be here soon. Still very interested in the 101 though!
You might want to double-check that registry hack to make sure it's correct. Seems like a big coincidence that the one registry hack you've made so far is to allow unsigned cabs to install and the biggest problem you seem to be having is that you can't get unsigned cabs to install....
Click to expand...
Click to collapse
Yeah I gave that a shot but no joy. That wasn't the only reg hack I did but the only relating to "Unlocking". I haven't touched anything I wasn't pretty sure about. For instance I have looked at all the tweaks for speeding up the TF3D using cache setting but the numbers don't match so I never tried it. If I didn't understand what the tweak was I stayed away.
I did the PTT button tweak for voice/camera and played around with the cities for the weather app. Other than that I can't think of anything else I touched in the registry but I did a lot of looking.
On the other hand I have installed a good bit of software to try out. I have also rearranged my menu items by deleting shortcuts in the start menu folder. Even though I've done a good bit to the phone I think it might be best to start from scratch with a hard reset and start again with the knowledge I've gained in the past few days. My Opera browser has been getting a real workout with 40+ tabs going =P
I did find another thread here that has someone with a similar problem but the way it happened was entirely different. His fix was to wipe the phone and use the same software I was trying to install when I found this problem.
http://forum.xda-developers.com/showthread.php?p=3038792#post3038792
I took ecltech's advice and got Sprite Backup and made a backup already. I would rather fix the problem but it sounds like it might be difficult tracking it down so I'm prepared to start again. What would be great is finding some guide or general direction in what programs and or tweaks I should install and in what order and any other pertinent information regarding starting from scratch. "The Must Have" utilities and programs.
I can't believe how helpful everyone's been so far considering this is a developers board. I figured it was worth the risk to get chewed in the hopes of getting the best advice. With all the info surfing I've been doing it's clear that this is the site where it all happens.
Cheers and thanks again,
Eidolen
OMG!
I'm almost too afraid to admit it but at least I feel good that I figured it out on my own. I was smart enough to make a backup of the registry with CeRedEditor before doing anything major and remembered it had a compare feature. After loading it up It immediately occurred to me to look at HKCR\cabfile and that's where I found my answer.
I had downloaded a little free utility from SKTools called Cabinstaller that allows you to choose where programs get installed. Somehow the registry entry it made didn't correctly point to the executable. In any case I think I installed it late the other night and forgot about it because the exe files I installed after that installed fine. I should have tested it immediately and I wouldn't have had this problem. /sigh
Thank you everyone for the help and ideas and even though I've fixed this problem I still might do a full reset and start from scratch now that I got all mentally prepared to do it and start over feeling a little more confident in what I'm doing.
While it's on my mind right now and since I never got a solution for the question in my first post, is there a hack or small little program that will allow you to put a shortcut in either the top bar where the start menu is or in the bottom where the shortcut for the on screen keyboard is so I can invoke the Task Manager easily to help with navigating? I wouldn't even be opposed to a shortcut in the TF3D pop-up you get when clicking on the top right bar. It would be great if this could be done with a bloated program but not opposed to it if the program is useful.
Thanks again everyone. I guess I'll start a new post for any new questions. (I have lots but will try and figure out as much as I can by myself first.)
Cheers,
Eidolen
eidolen said:
I
I took ecltech's advice and got Sprite Backup and made a backup already. I would rather fix the problem but it sounds like it might be difficult tracking it down so I'm prepared to start again. What would be great is finding some guide or general direction in what programs and or tweaks I should install and in what order and any other pertinent information regarding starting from scratch. "The Must Have" utilities and programs.
Click to expand...
Click to collapse
I think you're probably right about starting again from scratch. It would probably be less work than tracking down what's causing your problem and then you'll be starting with a cleaner slate for installing everything going forward.
There are a few different threads on here about what constitutes "must have" apps for the Fuze and the one thing I can say is that no two people agree on the list! Your best bet is to seach out those threads and see which ones you think would be most useful to you. A great place to get started is at http://www.blownfuze.org using username and password 'xda' (without the quotes)
My suggestions for the generic must haves are:
Total Commander
PHM Registry Editor (or whichever reg editor you prefer)
Diamond Tweak
Diamond TF3D Config
Other basic programs that might be worth checking out depending on what you do on your fuze are:
PocketShield or S2U2 for locking the phone
TCPMP Core Media Player
TorchButton for using the LED flash as a flashlight
BeyondPod or pRSS Reader for RSS feeds and podcasts
GoogleMaps and/or Live Search
Good luck!
Sprite backup is included in your Fuze as original software. I always keep a full backup copy on my Sd card of a good clean WM 6.1 install with all the must have tweaks done already. You will find it saves alot of headaches when you mess something up trying things out. After that I do a weekly backup as I add more and more stuff over time.
does diamond TF3D Config or diamond tweak work with this ROM version?
Thanks yzf750, I am preparing to do just that. I am getting prepared for a hard reset now once I notate what I want to keep that's on my phone already. Hopefully I can get it set up by the time my SD card arrives this coming week and can do the backup to it for keeps.
I read a blog post about doing a soft reset after a hard reset to prevent the ATT software from installing and I think I really want to try that. I just need to make sure I install the stuff I want to keep like TF3D manually afterwards. I'm hoping to find a more detailed guide for the procedure than what was posted though.
I'll post back and report if the smoke genie escapes or not.
Eidolen
some n00b guidance
Ok so i have been looking at these forums for a few days now doing homework before i even get the phone(its ordered). So my questions are
1. if i have AT&T unlock the phone(i know someone who works there so i hope they can help out) do i still need to do the hardspl to change radios etc?
2. Whats really the difference between all these roms built by users and just using BuildOS(im assuming this works on GSM phones and not just CDMA because its from PPC) to build your own ROM? and do most of these tweeks come prebuilt into these roms or do u still need to to other stuff? i.e reg tweaks etc, like i think it would be better for me to just build a rom with BuildOS with the apps i want etc and not keep flashing all the time
3. Is GPS still a problem for people?, i think ill just use tomtom or garmin and hope for the best as its not a huge concern. After looking around i guess its just a matter of finding the radio that works best for the individual, so anyone in the .US new england area have any recommendations of the best radio in the northeast like NYC area?
4. whats a good order to do this stuff?, i plan on using the phone for a couple days or so as stock just to get the general feel of the OS in general. then prolly flash the ROM with a custom BuildOS ROM(unless someone can provide the difference between BuildOS and say PROven ROM), then do w.e else needs to be done. ive seen the recommeded tweaks, just not sure if they still need to be done with a flashed ROM. not really looking for a game phone more office apps like RDP and irc etc, sys admin tools
Basically i think theres just a ton of info on here which is a good thing but im just getting started on Winmo although flashing etc dosent intimidate me so im eager to get started just a little unclear on some things and cant seem to find the answer just surfing, so any help or links to some stuff i might have missed is appreciated. Pretty much just want a smooth runnin ROM thats not stock of course, decent gps reception and the apps i want. thanks all
Look here, I made a little write-up for the basics using a stock ATT ROM. I ran this routine actually twice on my phone (ROM flashing junkie) so it should be fairly complete.
I have to note that, in most cases at least, I know what I do and can "recover" from a ROM flash within ~ 30 minutes, having all software, tweaks and contacts restored.
Regarding ROMs
That's an open can of worms with two next to it waiting. Read the threads and read the problems and decide later if you want to flash or not. If you are not used to WinMo phones it's perhaps better to hold back a week or two.
Some ROMs are built from original Raphael builts others are based on WinMo 6.1 but contain partially applications and tweaks from other HTC devices. The latest build # need not to be the best. For example RRE's ROM is based on the original ATT ROM and he created a really nice good performing ROM while other Chefs rip out first all guts and basics of a ROM (making it "naked") adding features and programs later. That's a more or less political discussion what's better and what's not and you have to decide yourself based on what you read and/or experience. For MY part I know Monx/HT from the Tilt times and always appreciated his work and speedy ROMs and he continued the same line on the Raphael/Fuze though it took him some time to come where he is right now.
As said all political in that regards, almost all ROMs out there ARE GOOD and have advantages in the one or the other area.
Tweaks
Yes the tweaks work even for a stock ATT ROM with ATT's TouchFlo/Manila (though I think it's plain ugly).
GPS
Again a difficult subject. For example the stock GPS (enabled or disabled assisted GPS settings) works kinda well with google maps BUT doesn't perform as expected with 3rd party GPS apps (TomTom, iGO). Keep in mind a lot came from other devices and for example iGO on the Tilt rocked down to the street number with no lag at all where the Fuze is doing more "guesstimating" than performing (compared to the Tilt).
Backup
Do a PIM backup once or twice a week and do a FULL backup once a week or if you installed new software after you confirm that you like it. If you wreck your phone for whatever reason AND you stay with the SAME ROM a full restore will work.
Just Wow!
That's an impressive piece of work there. I haven't stopped reading or poking around while I'm waiting for my SD card to get here and had quite some experience today. I did read the thread regarding doing a "Non-Bloat" Install and actually started to do it but stopped when I realized there still seems to be some residual bugs to the process. I figured for now even with the little bit of confidence I've gained I'd wait on that a little longer.
I did jot some info down while it was still "Bloat-Free" for anyone interested:
Bloatfree Services:
App Service APP1:
USSD APP8:
Push to Talk PTT0:
EnlargeStartMenuEMX0:
HTC IMS service IMS0:
STK Service AP15:
LargeTitleBar AP21:
HtcServices HSV2:
Keypad KBD1:
Bluetooth Audio Gateway BAG0:
Software Disable Dialog Service SDD0:
Sync Bluetooth Server ASV0:
Software Management Service SWM0:
Certificate Enroll Engine CES0:
SNApi SNA0:
DPT DPY0:
LAS LAS0:
Credential Manager CRD0:
Notify NFY0:
OBEX OBX0:
Bluetooth HID Loader BHL0:
SqmUpload SQM0:
Click to expand...
Click to collapse
Bloatfree Processes:
NK.exe
RegistryCSPTool.exe
OperaPreL.exe
poutlook.exe
sapsettings.exe
opera9.exe
htcimssvc.exe
tmail.exe
cecmd.exe <--Total Commander
conmgr.exe
TaskMgr.exe <--duh
rapiclnt.exe
repllog.exe <--activesync
biotouch.exe
shell32.exe
QuickGPS.exe
VoiceCMD.exe
SIPGT_app.exe
services.exe
filesys.exe
gwes.exe
manilla.exe
device.exe
cprog.exe
Click to expand...
Click to collapse
I forgot to check the memory and storage readings sadly but I figured this list could be checked against the full bloat version to see what processes and services could be killed. I figured I'd play with a full working install so if anything didn't work I would know it was from myself or software I installed instead of guessing if it was a side effect of the no bloat process. Also I could learn what the bloat was and strip it away.
Once I decided on Bloat I started a Log/Diary of everything I did for my own reference and thought it might be useful for troubleshooting later. Everything was going smooth until I decided to take on the behemoth named RealVGA.
Luckily I made a full Sprite backup previous to playing with it and am reinstalling that backup as I write this.
If there is one piece of advice I could give from the little knowledge I've gained so far is that most of the upper-end hacks/tweaks software that is available are living breathing complex entities and are not to be taken lightly. Each one needs to be thoroughly researched and understood before using unless you have an older device that has been supported for a long time. I find very little information on using most software regarding the Fuze even though it is very similar to other devices. Truth is, it is not identical which can make things hairy at times. Anyway the more you fail, the more you learn.
For other Fuze owners out there I'll post my personal log so you have an idea what programs I had trouble with and what I tried to do to resolve them. For sure I had huge problems with RealVGA as well as PocketCM and PocketCm Keyboard. It's a shame too as they all are outstanding upgrades.
Well I think I'll be ready for your tutorial when my card gets here so I will be sure to report back to let you know how it went. I already learned a lot just from reading it. For one I didn't know you could do anything over usb if you cancelled the ActiveSync. I just used that trick while restoring my phone and still haven't done a sync. I'm sure that guide will be a huge help to many like myself.
Huge Thanks!
Eidolen
PHP:
Diary of a Blown Fuze (Blown Attempt that is)
Just a stream of consisnous, sorry if some doesn't make sense
Log got more vebose as I went.
"Fresh Bloated Install"
Boot
Set Weather City
Configure WiFi
Calibrate G-Sensor
==================================
Memory:
Storage======Program
Total 294.53 || Total 200.99
In Use 74.05 || In Use 70.93
Free 220.48 || Free 130.06
==================================
Turn off Auto Backlight - Adjusted Settings
Removed Programs - I Play Jewel
Configured all settings under "All Settings" tab
=====================================================
Having keyboard problems where it is unresponsive. Had to use on-screen KB
to write user information. Also had KB lag a few times afterwards but not
as severe.
=====================================================
SYNC (Merged 89 file items)
Install NETCFSetupv35.msi
Install netcfcfg.cab
Install tcmdpocketarm.cab
Configured .Net to use 3.5
Installed Advanced_Configuration_Tool_v3.3.cab
Create Sprite Backup "Fresh Install" ACT3.3 not config yet
=========================================================
Phone supplied Sprite backup software reported "backing up 85mb" but when finished
the file is only 144kb! Not sure what happened. Will try to initiate
a backup from the desktop software.
=========================================================
Initiated Full Desktop Version backup "Fresh Install 2 FULL" 93.03M
Ended with file size of 60.3M
**********************************************************
Configure Advanced Config Tool:
User Interface ->
Horizontal Icon Spacing: 150
Vertical Icon Spacing: 140
Icon title font size: 8
Popup Menu Font Size: 800
Power Management ->
All either default or "Advised" setting if applicable
Screen ->
Show Orientation: Yes (default)
Keyboard Backlight Timeout: 15sec
Suggested Words: 3
Network ->
Device friendly Name: #####
Phone ->
Show All Call History: Yes
Call History Clean: Never
Show Battery Icon: Yes
Show Band: Yes
Bluetooth ->
BT Device Name: #####
GPS ->
Logfile Size: 32K
Internet Explorer ->
4 Way Navigation: Disabled
Clear Type: Enabled
Search Page: Google
Max Connections Per Server: 8
Messaging ->
SMS Delivery Notification: Yes
Use Unicode Support: Yes
Symc Sent Items: Yes
Show Roaming: Yes
Calendar ->
Show Lunar: Yes
Show Events in Week View: Yes
Camera ->
Capture Key Delay: Enabled
Key Delay: Enabled
HTC Animation ->
Volume: 90
HTC Camera Album ->
OK Button: Close
Misc:
Auto Daylight Savings Switch: Yes
Show Daylight Savings Notification: Yes
<<<<<<<<<<<<<<<<Noticed lots of options missing from last time I used this program before the hard reset like more font sizes among other things>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
**************************************************************
Sprite Resore "PIM_2008-12-13.exe" PIM info Only
Contacts Restored but no TF3D settings were retained
(No contacts in TF3D, Messages, etc..)
Set up both email accounts
Set Up online AB LDAP
Adjusted Camera Settings
Copied My Pictures,Notes, Ringtones, PTT shortcuts and other "Files" back to device using Sprite Explorer File=2008-12-14.exe
Extracted "Browser Favorites" From Sprite Explorer /System Settings 2008-12-14.exe
Hand Edit Opera.ini
Transferred Some opera files (wand.dat, cookies, images) using Sprite Explorer 2008-12-14.exe
Transferred a pantload of s/w to be installed
Installed Diamond_TF3D_Config_Setup_v0.6.7.cab
(Made speed adjustments and removed Worldcard and "Unknown" TAB. Also "Unlocked" Noticed program launcher shows a ton of empty entries.)
Install ResPack128dpi.ARM.CAB
Install ResPack96dpi.ARM.CAB
(Sprite backup crashed on reboot from ResPack96dpi.ARM.CAB)
InstallRealVGA_11.CAB
Install missing ipxxx.dll's and screen went black then rebooted
**** my Pants *chant* no-brick no-brick no-brick
Watched it reboot. Something crashed but then TF3D loaded with tiny fonts!! (128dpi)
Modified Menu Icon spacing for 4 in a row. (Want to tweak further if I keep RealVGA)
=================================================================================
HKLM\Software\Microsoft\Shell\
Add New Key "IconConfig"
In there Add DWORD Value:
"HorizontalIconSpacing" Dec value="112"
"VerticalIconSpacing" Dec value="115"
"IconTitleFontSize" Dec value="6"
==================================================================================
Notice a small black band on TF3D screens at the bottom. Acts as part of the tabs
Total commander toggle icon bar does not fully open up.
Contact all people link does not work
Contacts from Start Menu does not Work
Phone does not work
Installed respack96outlookfix.cab and Changed to 96 DPI now contacts and phone works!!
Adding Contacts in TF3D very buggy, auto puts in a picture somehow and have to go back and change it.
NVM...It selects the pics I had assigned before the reset somehow. Cool!
On Screen Keyboards Very Borked (Only Partially Visiable) Trying PocketCM Keyboard for VGA *Crosses Fingers*
It works but no colors, just plain Gray *humph!*
===============================================================
Config Fonts in Advanced config tool
UI ->
H Scroll Width: 25
V Scroll Width: 25
H Arrow Size: 32
V Arrow Size: 32
Icon Title Font Size: 16 (Was 6)
Menu Bar Font: Large
Popup Menu Font Size: Large
===============================================================
Reset
Home TF3D Screen buggy, Tabs at bottom are doubled up. Clears when used to scroll but large black bar at bottom now
Wow! TF3D Communtications screen is really toast! It shows in upper left screen and at least it works but it's almost unreadable.
Not noticing any change in fonts so far
"All Settings" Won't Launch. Ouch!
Umm, System Locked up hard
Tried sliding keyboard and heard sound and title bars appreared but no luck, home and back not work either
It let me reboot with switch at least, not reset button
Tried Unticking "Disable Skin" in RealVGA
Reboot
"All Settings" Still Borked
reboot
Start Menu -> settings locks up too *cry*
Reboot!
Maybe result of font settings in ACT?
Might be time to do a restore =(
===============================================================
Config Fonts in Advanced config tool
UI ->
H Scroll Width: 19
V Scroll Width: 19
H Arrow Size: 20 (default)
V Arrow Size: 20 (default)
Icon Title Font Size: 10 (Was 16)
Menu Bar Font: Large
Popup Menu Font Size: Large
===============================================================
Reboot
RealVGA is nice but not sure it's worth this effort. Just too many problems.
Noticed graphics in TF3D are much slower and laggy now as well.
"All Settings" still borked Not sure what else to try at this point.
Good info on this subject is hard to come by. Most ppl seem to have good luck with this app.
Went to re-tick the skin option in RealVGA but it was still ticked. hmmm
What I think is needed is an app that could swap resolutions on the fly with a hotkey. ( Prolly not technically possible)
At least you could have normal usage and only use for certain apps that really benefit from it.
After another reboot the "Disable phone skin" is checked again. Guess it can't be unticked.
Un-ticked "No enlarge title Bar" in Diamond TF3D Config
I am able to open the "Programs" link from the start menu, wonder why settings is screwed.
Tried settings again, no joy, was able to use home key though this time. Not locked up.
Start menu does not work now though. Yikes, had to use reset this time.
Throws arms in the air!
Hard Reset =(
You are funny eidolen.
If you want copy the files I provided to your device (since you don't have a DS yet) and play with it.
You'll hard reset anyway when the SD arrives - LOL
Your also going to find at some point that the more and more tweaks and modifications you make,more problems will start sufacing. I was a rom flashing junkie like many on this forum for 2 years. Since I replaced my prior phone with the Fuze I am running just the stock rom without bloatware and a FEW select tweaks (includes radio change). It runs fast, works good and I dont have to soft reset it all the time.
Take a look at every custom rom, Im not putting any of them down, but after time the threads on them become 100 plus pages long, the number of other fixes to get them running right become impossible to keep track of. It becomes a daily job of just trying to keep that rom working without breaking some other feature or getting it to work right. They put out weekly fixes on most custom roms. They start out with the right intention, but it soon becomes just a bloated non oem rom after time.
Its addicting and fun, but at some point a person just wants to use the phone instead of hard resetting it all the time, flashing roms nightly and trying to figure out how to fix stuff in each rom.
I reached that point now and my fuze is outstanding without having to spend days tinkering with it. It is snappy, reponsive and ALL the software I have installed on it works, and the GPS works flawlessly even inside my house.
But again, your "hands on" approch as your doing now, is probaly the best way to learn
teh bestest
between these last few posts and my little chat with our neighbors PPC on there irc channel i am pretty confident i know what the deal is now, you guys have been a great help, i think im going to play a bit with some roms of course but eventually land on a bloat free standard rom with some added apps like putty and irc etc for sysadmin work, on that note yzf750 could u tell me exactally what u have running on yours sounds like its what im looking for.
Raphael is brutally closing programs!
I really dunno why is this happening... I have 50% of RAM free and it lets me run just 3-4 programs together. When I run one more... it occasionally selects one thats previously ran and kills it silently... I really wouldn't like to "Clear Storage" from settings
I also had this problem when I first got my TP. It's a simple fix - you need to disable AutoKill. With a registry editor, go to HKCU\Software\HTC\TaskManager, and change the value of “EnableAutoKill” to “0".
^ yes this a good fix. I remember I couldnt switch between opera and replying to a text message, I felt like I was back to a feature phone, with one thing at a time capability.
There is also a registry tweak that instead of killing apps you can change the threshold at which the system starts auto-killing, same registry path.
You guys are amazing! THANK YOU! BUT... I still have the problem
Any other ideas?
You can refer to this thread:
http://forum.xda-developers.com/showthread.php?t=426585
In the section of "Tips", there is a tweak which solved the problem perfectly
Thank you. Tried that caches tweak, it made whole system run much faster. But still - i cannot seem to get 4 proggies to run at the same time. Always the first dies... flip flop
This thread is turning into a copy of few others around here. Only this is new and alive.
Please help me out.
I've tried:
1) The HTC Task Manager registry tweaks
2) The cache sizes maximizing
and...
3)?
Maybe the ugly 32MB/32Process limit (http://msmobiles.com/F/viewtopic.php?p=36334&highlight=&sid=c6b5982e059ec35ce19fd3cd952bd683) is still present in WinMo6.1?
Hello!
OMFG! After disabling autokill my TP started to act almost like desktop in case of multitasking
I was able to run around 12 programs at a time, but i've also made changes to memorytreshold, the value i set was 173015040 (1.5 times the default value).
The funny thing was that TP was still responsive to commands and even opera ran smoothly when surfing throu light web pages.
First app closed after memory usage peeked around 65%, but the rest was still responsive.
Hope this helps
BHole
Thats my point. Same limit like 65% because I have customized my device with launchers, hardkey remapper, Wktask etc. Now I can have (only) five apps running at a time... Is there a sort of free RAM threshold inside the WM6 or HTC-s stock (1.9) ROM. Maybe it is still the 32 process limit from the old times?
Hello!
It looks like there is some kind of limit to number of proceses or memory used by them but if you customized your pda maybe you should disable some of the oryginal programs that are runing in the background. I saw some registry entries in taks manager that hid some of the runing aps maybe not all of them are nesesery for you and can be disabled to lower proces count.
BHole
Yeah.. but I would like to USE the RAM the device has.... I'd like to run manymany programs so the RAM load would be for example 95%. Why is not that possible?
Stop PushInternet for real - throw Opera out of memory and save 9.5 MB memory
Push-Internet – sounds like a pretty good idea: The user can set certain webpages to be automatically downloaded to their devices in time intervals that can be set. This way it will take much less time to open a webpage, since it's cached locally on the device.
On second thought this isn't such a great thing though:
1.The smallest time interval that can be set is 1 hour. For people that are in need of realtime information from websites, this certainly won't work. And even if you're just browsing to a website that is updated pretty often, you wouldn't want to miss the last hour and would refresh it anyway.
2.Another big downside of push internet: for it to work HTC forces Opera to stay in memory all the time. Even if you quit Opera from within, it will be restarted within the blink of an eye, at the costs of an extra 9.5 MB that are taken from RAM.
3.Opera staying in memory all the time makes it hard to save changes via opera:config , like the number of open tabs.
Now, there is of course the possibility to deactivate push internet some will say, but the available option does not actually stop the underlying pushinternet-service nor does it stop Opera from staying in memory (for no reason).
By downloading and installing the attached NoPushInternet_v2.CAB you will force the underlying PushInternetEngine service to „start manual“ instead of automatic and you will get rid of Opera staying in and eating up your memory after a softreset.
BUT BEWARE: Once you have installed NoPushInternet_v2.CAB, push internet will not work anymore, the respective setting under Touchflo will have NO EFFECT, no matter if turned off or on.
You will have to uninstall NoPushInternet_v2.CAB to actually be able to turn push internet back on. To uninstall got to uninstall programs and click on „Manila NoPushInternet“, all changes will be reverted.
Visit my Blog if you like: http://mytd2.blogspot.com , it's in german however.
This description is included in the CAB file and will be installed to \My Documents folder.
[UPDATE July 14]
Fixed a bug: Opera would not switch to landscape mode on the first loaded page.
Download and install NoPushInternet_v2.CAB or only NoPiFix.CAB if you had v1.0 installed.
.
TinTin said:
Stop PushInternet for real - throw Opera out of memory and save 9.5 MB memory
Push-Internet – sounds like a pretty good idea: The user can set certain webpages to be automatically downloaded to their devices in time intervals that can be set. This way it will take much less time to open a webpage, since it's cached locally on the device.
On second thought this isn't such a great thing though:
1.The smallest time interval that can be set is 1 hour. For people that are in need of realtime information from websites, this certainly won't work. And even if you're just browsing to a website that is updated pretty often, you wouldn't want to miss the last hour and would refresh it anyway.
2.Another big downside of push internet: for it to work HTC forces Opera to stay in memory all the time. Even if you quit Opera from within, it will be restarted within the blink of an eye, at the costs of an extra 9.5 MB that are taken from RAM.
3.Opera staying in memory all the time makes it hard to save changes via opera:config , like the number of open tabs.
Now, there is of course the possibility to deactivate push internet some will say, but the available option does not actually stop the underlying pushinternet-service nor does it stop Opera from staying in memory (for no reason).
By downloading and installing the attached cab you will force the underlying PushInternetEngine service to „start manual“ instead of automatic and you will get rid of Opera staying in and eating up your memory after a softreset.
BUT BEWARE: Once you have installed NoPushInternet.CAB, push internet will not work anymore, the respective setting under Touchflo will have NO EFFECT, no matter if turned off or on.
You will have to uninstall NoPushInternet.CAB to actually be able to turn push internet back on. To uninstall got to uninstall programs and click on „Manila NoPushInternet“, all changes will be reverted.
Visit my Blog if you like: http://mytd2.blogspot.com , it's in german however.
This description is included in the CAB file and will be installed to \My Documents folder.
Click to expand...
Click to collapse
thanx for the app
i'm looking for this a wile push internet is really not good dont like it at al
again thanx man really good work
GRTZ Roosen
It can also be done in the registry.
HKLM\Software\HTC\PushInternet\Enable => change to 0
@roosen
Thank you! Glad you find it useful.
@elmalote
Thats' not all of it.
very nice!!
thanks a lot.
Nice work dude
+10% free RAM : That's a TRICK! Thank you!
thanks friend. have no use for push internet. plus get back some ram!! good.
This is a very nice tweak, thanks. However, it does have one side-effect I am not sure I like. Because Opera doesn't run in the background, everytime you press 'Open Internetbrowser' Opera needs to be loaded and this takes a few seconds. Not sure if the extra free RAM outweighs the wait for the browser to start.
Thanks for the nice comments!
BettyWeter said:
This is a very nice tweak, thanks. However, it does have one side-effect I am not sure I like. Because Opera doesn't run in the background, everytime you press 'Open Internetbrowser' Opera needs to be loaded and this takes a few seconds. Not sure if the extra free RAM outweighs the wait for the browser to start.
Click to expand...
Click to collapse
That's true, of course and for everyone to decide for themselves. It will only take longer on first start, if you set Opera not to close on X or switch via Taskmanager (WksTask is great for that btw.) it will stay in memory. I for one like to decide myself if and when Opera stays in memory. Also this "downside" is an "upside" for some: Your device will start quicker, as Opera isn't loaded automatically.
You may however load Opera via autostart and have both: Opera ready in memory, but you can throw it out of memory if/when you like. Probably the best for your specific liking, Betty.
BettyWeter said:
Opera needs to be loaded and this takes a few seconds. Not sure if the extra free RAM outweighs the wait for the browser to start.
Click to expand...
Click to collapse
It is a personal choice depending also on what use you are making of your device, but as you said, it takes a really short time to load Opera. Be also aware that having a more charged RAM can:
slow down your device
drain battery more quickly (this is the problem I'm trying to fight by all means!)
I think that HTC decided to load Opera at startup "just for the show", to impress people when they discover their newly bought device for the first time. But with passing of time the surprise effect vanishes and users may want to have a more efficient device for every day use. Anyway..it's all up to you guys!!
To TinTin:
I don't like using to much cab files on my diamond 2.
I want to manually insert the changes into the registry.
If I do this:
"HKLM\Software\HTC\Manila\InternetPush\EnablePushInternet" value="0"
"HKLM\Software\HTC\PushInternetEngine\Enable" value="0"
"HKLM\Services\PushInternetEngine\Flags" value="4"
Is this then the same as your cab file?
Thank you very much for your tweak
Greetz from belgium,
Jeppe
be careful with this tweak because tomtom backlight will change and turn off everytime device goes to stand-by mode!! I don't know why...
@diego
must have been caused by something else, definitely not related
jeppe188 said:
To TinTin:
I don't like using to much cab files on my diamond 2.
I want to manually insert the changes into the registry.
If I do this:
"HKLM\Software\HTC\Manila\InternetPush\EnablePushInternet" value="0"
"HKLM\Software\HTC\PushInternetEngine\Enable" value="0"
"HKLM\Services\PushInternetEngine\Flags" value="4"
Is this then the same as your cab file?
Thank you very much for your tweak
Greetz from belgium,
Jeppe
Click to expand...
Click to collapse
Could TinTin be kind enough to confirm this..?
Sorry, not sure how I missed that post.. seems I'm not always getting notifications here either
It's correct, all DWORD values, last one has to be created, it's not there by default.
hth
Tin
TinTin said:
Sorry, not sure how I missed that post.. seems I'm not always getting notifications here either
It's correct, all DWORD values, last one has to be created, it's not there by default.
hth
Tin
Click to expand...
Click to collapse
Can I use the cab-file for my HTC Touch Diamond 1?
I tried jeppe188's tweak, but I can't find those 3 InternetPush-files in my registor. Are they placed in another map on the TD1?
Regards, R.G.
GommansR said:
Can I use the cab-file for my HTC Touch Diamond 1?
Regards, R.G.
Click to expand...
Click to collapse
I don't own a TD1, but afaik it does not come with push internet, hence this tweak is useless for you.
ok thank you
Thanks dude. Got 10MB+ back.
This is the 3rd day I have my D2. Maybe this is the initial stage so I do soft reset more often (install new software). Hope so coz I cannot imagine if the back cover can survive multiple opening per day for each soft reset. hahaha