ossible Tethering Walk Around ? (Telus) - Non-Touchscreen Windows Mobile Other

I had my HTC s640 in diag mode (##3424) while I was enabling the GPS. While in the NAM menu I noticed a tab for the 1x connection on the phone. It basicly said while the phone is online send the user name 506645XXXX.1x.telus , then next to that it says While tethered send 506645XXXX.mb.telus . I basicly Changed the tethering UserName to match the phones username. Also I disabled the the reg option for WModem to send Packet header information. I've been using this option and telus has yet to bill/report anything other then regular cellular usage. The only downfall is the connection is around 115Kbps, instead of the usual 2.0 Mbps. Any thoughts ?

this still working for you?

Related

at&t rom 1.62.502.0 internet problame!!!

hi all
im new here many thanks for that amazing group here.
i have yesterday upgraded my rom of my at&t tilt (kaiser tytn ii) to the new version, well all looks ok BUT...
since then i cant get internet connection and mms messages.
i have checked it the whole day today with my network company (im in israel) and we have reconfigured the modem connections but nothing its dead.
before i have done the upgrade all was just ok since yesterday its no connection.
i have checked arround and i found that there are many users that have the same problame all around the world.
since any mms message goes thru internet (etc. gprs,edge,hsdpa) i assume that the problame is with the internet connection and that blocks the mms messages.
my cell company told me that as she sees all is ok and i remember my settings too.
also even when i connect my tilt with usb to my computer i cant go on the web bacause it says "no connection".
i assume that they have planted in the registery any value that blocks any internet connection (as gprs etc.) if its not thru the own supllier, i can understand also why but the fact is that i get hspda connection and i see the icon of "connected" but somthing blocks it !!!!!
is there a way how we can digg in and remove that block that dosent allow the internert?????
is there a way to bypass it ????
or maybe i should go back to my old ROM is that possible????
again i remind u that:
1) all worked excellent till yesterday
2) the HSDPA establishes a connection but the explorer is dead.
3) i cant even connect thru my pc with usb while my pc is fully connected via dsl to the internet.
4) all setting are same and at once its "no connection"?
5) i see that meny users have that problame
if there is any way let me know
also how bad and ugly will it be if i go back to my old ROM and how do i do it.
many thanks
tachat.....
run again the remove hidden proxy cab.
what do u mean "hidden proxy"
i never had any hidden proxy before why should i have them now??
how do i find them?
how do i remove them??
thanks
tuches
tuches said:
i never had any hidden proxy before why should i have them now??
[/b]how do i find them?[/b]
how do i remove them??
thanks
tuches
Click to expand...
Click to collapse
by searching removeHiddenProxy4CWS_1219.cab
Where did you download the rom from???
I know the one at HTC America is intended & configured for AT&T customer in North America. If a ROM was not released on your local AT&T or HTC site, that may contribute to your issues.
You may want to DL the network configuration wizard & give it a go at reconfiguring your device.
some good news
hi all
many thanks for visniak you were right.
it was some hidden silly proxy that i needed to kick out.
now the internet works great BUT i cant send MMs messages.
the configuratins are all ok (i checked it today with my network company)
they say that thats a ROM problame (means that this might be a problame because i upgraded it to ROM 1.62)
is that right???
is there a solution???
many thanks
it's like BEZEQ and BEZEQINT
each blaming the other.............
I don't use MMS.
But most likely your settings are incorrect.
Does the new AT&T ROM solve the Low Volume when using Bluetooth?
That is the only iserious issue I have with the Tilt.
I have been a Symbian user forever and the AT&T Tilt(Unlocked and using it on another service provider in India) is my first exposure to Windows mobile. I upgraded to the new AT&T Rom(1.62.502.0) and the low bluetooth volume issue is sorted out...I'm using the SE 970 stereo BT headset, which is working fine.(ADVANCE that should solve ur query)
My only issue now is that i am unable to use the Internet Explorer thru GPRS. Strangely i could configure and download my E mails thru Outlook. Also, when I Sync the Tilt with my PC, IE works fine using the net connection from the PC. Any insight/clues why I'm facing this issue?

FUZE, Internet Sharing, Vista, USB

any reason why the above should not work "out of the box". i have been tethering fine with my BJ1 but got my FUZE yesterday and it's not working. Says "waiting for network" then "remote party has ended this connection".
i did try installing the modem drivers from the CD, did not help.
what is the most common cause of ICS not working with vista over USB?
thanks in advance.
did you uncheck enable advanced network functionality? Its checked as defualt. Uncheck it and try again.
more ICS help needed
hondaguyjoe said:
did you uncheck enable advanced network functionality? Its checked as defualt. Uncheck it and try again.
Click to expand...
Click to collapse
i tried that, still does not work.
in VISTA i briefly see the RNDIS network connection go to enabled but quickly goes to disabled when the handset says "remote party has ended..."
on the FUZE i have
Settings | Connections | Wireless Manager | Data Connection = On
and the only thing i changed during my trouble shooting is
Media Net | Select a Modem = Cellular Line (GPRS, 3G)
settings also have wap.cingular as it should, and don't know what the preset password is - i haven't touched it. should i use the password that i know worked on the BJ1?
also, in WiFi Settings, does the Remote NDIS network adapter settings play into this? i put it on DHCP and it also says "connect to work" - should that be "internet"?
thanks
raywright1 said:
i tried that, still does not work.
in VISTA i briefly see the RNDIS network connection go to enabled but quickly goes to disabled when the handset says "remote party has ended..."
on the FUZE i have
Settings | Connections | Wireless Manager | Data Connection = On
and the only thing i changed during my trouble shooting is
Media Net | Select a Modem = Cellular Line (GPRS, 3G)
settings also have wap.cingular as it should, and don't know what the preset password is - i haven't touched it. should i use the password that i know worked on the BJ1?
also, in WiFi Settings, does the Remote NDIS network adapter settings play into this? i put it on DHCP and it also says "connect to work" - should that be "internet"?
thanks
Click to expand...
Click to collapse
Ok Im having the same problem I guess I should of tried it before opening my mouth lol
on my 8525 running WM6.1 it works flawlessly PC connection is set to usb and network connection is to media net.
On the fuze I get the same error you do something like connecton to host failed....
so now I'm on the please help me list with you!
I spoke to someone a rep friend of mine and he said they disabled the ability to tether. You need to have the tethering plan in order for it to work.
Hmm, seems like somebody's going to need to hack around that
jasongw said:
Hmm, seems like somebody's going to need to hack around that
Click to expand...
Click to collapse
Yeah really! looks like I wont be getting rid of my tytn any time soon its going to suck to swap out sims everytime I want to tether to my laptop.
I had a similar issue:
An unlocked and custom-ROM Wizard worked with ICS just fine. My new Samsung Epix kept spitting out the dreaded "The remote party has ended this connection" almost immediately upon clicking Connect in ICS.
I see you already have MediaNET pointed to wap.cingular
I found I had to add the username and password:
[email protected]
CINGULAR1
I also set GPRS Authentication for MediaNET to CHAP.
I am internet sharing 3G beautifully over Bluetooth with Vista64.
ICS problems (cont'd)
cjones277 said:
I had a similar issue:
MediaNET pointed to wap.cingular
[email protected]
CINGULAR1
GPRS Authentication for MediaNET to CHAP.
Click to expand...
Click to collapse
this is consistent with my BJ1 settings and works fine on that device. i have the same settings on the fuze.
did you do anything on the Vista side?
did you have to install the drivers from the CD?
any other settings that i should know about?
I had the same problem. This workaround seems to be working for me, though:
0. Make sure phone is NOT connected to computer
1. Go to Start -> Programs -> Internet Sharing
2. Set the PC Connection to USB and the Network Connection to Media Net
3. Click Connect
4. Connect USB cable to computer
ITNV said:
I had the same problem. This workaround seems to be working for me, though:
0. Make sure phone is NOT connected to computer
1. Go to Start -> Programs -> Internet Sharing
2. Set the PC Connection to USB and the Network Connection to Media Net
3. Click Connect
4. Connect USB cable to computer
Click to expand...
Click to collapse
This is what I do on my 8525 but on the fuze no luck :-(
Im going to try and do a hard reset and stop it from installing the at&t stuff and see if it works.
ITNV said:
I had the same problem. This workaround seems to be working for me, though:
0. Make sure phone is NOT connected to computer
1. Go to Start -> Programs -> Internet Sharing
2. Set the PC Connection to USB and the Network Connection to Media Net
3. Click Connect
4. Connect USB cable to computer
Click to expand...
Click to collapse
Network connection drop down seems to be absent in internet sharing on my Fuze... hmmm...
Well the hard reset with no extra stuff installed did not work :-(
I hope some HTC wizard can figure this out.
I think this is a Windows Mobile registry settings issue, not an HTC issue. They set it this way at the request of AT&T.
Got this from:
http://forum.xda-developers.com/showthread.php?t=437796&page=2
This may actually fix both the missing Network drop-down and the "Remote party has ended the connection" issue. Its for Sprint, but worked for me. Just substitute MediaNET for Sprint.
After my first post, I had to do a Hard Reset and then the issue jamorgan2008 is having (Network drop-down not showing). I didn't have this the first time. I looked up the Registry Key and it had Cingular ISP as the ForceCellConnection value. I deleted it and am back on again. As such, this may also fix your issue as well, hondaguyjoe. Do you have the Network option in Internet Sharing or just PC Connection? You may need a Mobile Registry Editor for this.
See below:
Originally Posted by mcgowanbl View Post
This works with standard $15/month Sprint PCS Vision plan.
No you do not need to purchase Phone As Modem plan.
No they will not charge you extra because there's no way for them to known you tethering to a pc.
I have two Touch Diamonds (not Pro's).
One for my wife and one for me.
My Internet sharing (Start\Programs\Internet sharing) only has one drop down menu, "PC Connection".
My wife's has two drop downs "PC Connection" AND "Network connection".
Now I bought her's two days after mine at the same Sprint store.
Her Internet connection shares Internet via USB connected directly to a PC without issue.
Mine doesn't since I have not been able to set the missing "Network connection" drop down menu option to the appropriate setting of "Sprint". Instead it either say Waiting for network or error 67 invalid username and password (something like that)
I deleted the key: (not just the value)
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection
Now I got the second drop down menu "Network connection", restarted the phone and now it works like a champ.
cjones277 said:
I think this is a Windows Mobile registry settings issue, not an HTC issue. They set it this way at the request of AT&T.
Got this from:
http://forum.xda-developers.com/showthread.php?t=437796&page=2
This may actually fix both the missing Network drop-down and the "Remote party has ended the connection" issue. Its for Sprint, but worked for me. Just substitute MediaNET for Sprint.
After my first post, I had to do a Hard Reset and then the issue jamorgan2008 is having (Network drop-down not showing). I didn't have this the first time. I looked up the Registry Key and it had Cingular ISP as the ForceCellConnection value. I deleted it and am back on again. As such, this may also fix your issue as well, hondaguyjoe. Do you have the Network option in Internet Sharing or just PC Connection? You may need a Mobile Registry Editor for this.
See below:
Originally Posted by mcgowanbl View Post
This works with standard $15/month Sprint PCS Vision plan.
No you do not need to purchase Phone As Modem plan.
No they will not charge you extra because there's no way for them to known you tethering to a pc.
I have two Touch Diamonds (not Pro's).
One for my wife and one for me.
My Internet sharing (Start\Programs\Internet sharing) only has one drop down menu, "PC Connection".
My wife's has two drop downs "PC Connection" AND "Network connection".
Now I bought her's two days after mine at the same Sprint store.
Her Internet connection shares Internet via USB connected directly to a PC without issue.
Mine doesn't since I have not been able to set the missing "Network connection" drop down menu option to the appropriate setting of "Sprint". Instead it either say Waiting for network or error 67 invalid username and password (something like that)
I deleted the key: (not just the value)
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection
Now I got the second drop down menu "Network connection", restarted the phone and now it works like a champ.
Click to expand...
Click to collapse
Works great!!! Posting now from my MBP via Fuze!
Sweet thanks this board is great!! *sent from my note book via fuze"
New issue I have the 3G icon with 2 bars but when I connect to the notebook it switches to edge. I can browse on the device with 3G but once I press connect it goes to edge.
Any ideas?
Thanks
hondaguyjoe said:
New issue I have the 3G icon with 2 bars but when I connect to the notebook it switches to edge. I can browse on the device with 3G but once I press connect it goes to edge.
Any ideas?
Thanks
Click to expand...
Click to collapse
Im not seeing this issue with bluetooth... perhaps you are in a poor reception area. Are you using a usb cable or bluetooth?
What are you using to edit the registry with?
Arius1 said:
What are you using to edit the registry with?
Click to expand...
Click to collapse
Search Google for PHM Registry Editor.

Question about connections.

Ok, my operator uses 2 different connection, one for data, and another for MMS. The problem is that when I receive new MMS, my device connects the data connection, and the MMS can't be downloaded through it. How can I configure my device to use the MMS connection for new MMS, and the other one for everything else.
i dont think it possible as this is set by the operator so you can be priced correctly
Actually this is quite common, my carrier also does this.
What you need to do in connections is have the data settings (for internet use etc) in the My ISP part and the MMS settings in the My Work Network section.
Then click advanced tab in connections. Ensure in the "programs that automatically connect to the internet.... says My ISP" and in the "programs that automatically connect to a private network...... says My Work Network".
This should work and does indeed work on both my devices.
I'll give it a try.
And yes, it's made to be taxed correctly, I have to be taxed for data connection, but not, when I'm receiving a MMS .

Data connection error on startup

When I turn on my tp2 why does it always tell me data connection error. Click the settings link to set it up? I do not have any use for it and I always have to disable itinerary comm manager even though I already disable it. This drives me mad! I bleeping hate this.
Create a duplicate of the connection. i had this problem when i was using the wmwifi program and it somehow messed my connection up. i waqs on the phone with the verizon techs and they couldnt figure it out...of course i didnt tell them i was tethering bcuz i didnt wanna draw attention to my account. they had me do a hard reset to fix it...which it did but it wasnt needed....so
Go to Settings
Connection(Tab)
Add New Modem Connection
Enter A Name: you can put anything here but i guess "Verizon" would be proper
Select a Modem: Cellular Line , click (next)
Enter #777 for the number to be dialed
User Name: Your phone [email protected] Ex. [email protected]
Password: vzw
(finish)
set your phone to operate through that connection, hopefully that works for you
I want data connection off. I am so sick of it.
if you want it off i guess u can delete all your connections and it will prevent u from connecting. since the phone is programmed to operate on a connection you might always get a little ''eroor connection'' message i would guess
Go to Settings
Connection(Tab)
Manage Existing Connections
This was display all ur connections, tap and hold the connection and go to delete and that should do what your asking for...if you have no settings to connect with then your data connection shouldnt work(in theory it sounds right) its just something ive never did
You could try just programming the phone thru verizon (fixed my data error also), by dialing *228
...then pick option 2 and wait, it should fix up your data connection stuff
I currently have a PPC 6800 origionally with Alltel and now Verizon. I want to upgrade to the TP2. A person at the Verizon store told me that I have to have a data package or the phone will not work at all. I am not interested in a data package and use the phone for the WM applications and sync with Outlook. Right now I just have a voice and text package for my 6800 and I just want to keep it that way. Are they blowing smoke up my skirt or is that the real skinny?
I got the same line from the Alltel people when I bought the 6800 and it took 3 trips to the store and countless phone calls to support before they figured that out!

[Q] Red Pocket data only for mobile devices APN settings (t-mobile mvno)

I received a micro sim ordered from Red Pocket for their data only prepaid plan for mobile devices.($10 for 1gb for 30 days, $30 for 3gb for 30 days, $50 for 5 gb for 30 days. After 3 and 5 gb limits then unlimited data with reduced speed on those 2 plans). That service use their GSMT (tmobile) sim card. I have a Pantech Element (tablet 4GLTE from at&t, sim unlocked). The issue is the instructions RP gave me was to create a new 'access point name', write 'Red Pocket' at 'NAME' and 'wholesale' at 'APN'. My tablet shows strong signal, identifies it as 'RED POCKET', but when I open a browser or other aplication that requires data It keeps connecting and disconnecting. I do a scan, selected 'T-mobile', and the browser went to 'tmobile' page that shows that my device was not supported. So, I think the 'unlock' worked.
My question is, is it correct the APN setting RP gave me? It's my first time I work on something like this. And everytime I call they tell me to change something at apn setting from 'not set' to 'default', and from 'default' to 'not set'. I really want that service to work. I don't want to has to carry another device to access internet having a tablet that is 4glte gsm.
If anybody has information abbout correct APN settings for Red Pocket (tmo mvno) mobile data for devices (no voice) I will really appreciate it.
Thank you.
(appologize for my english. It's not my first language)
re
i have a similar issue. posted in a old dead thread: " anyone using red pocket gsmt data only plan? it uses t-mobile 4g, my phone shows all signal and 4g, but wont download anything, any app that use internet is not connecting, their reps are helpless'

Categories

Resources