Database Info

activesync and wm6

I have just flashed my wizard with a TNT wm6 and now I can't get activesync to regonize my device. I am using activesync 4.5. I uninstalled activesync and relaoded it. I have rebooted both my wizard and my laptop. I have checked the coms and let activesync look for my wizard and it tells me that my device has npot been detected. My wizard is showing the plugged in icon and is taking a charge from my laptop but its not allowing me to share info. is there anything I am missing....?
thanks!

I got the same problem! Cant sync with 2nd PC after upgrade to TNT5.0. I reinstalled Active Sync but it wont work. Now I only can sync with the PC which used to flash ROM. Is there any bar in OS that just allow sync to 1 computer?

Nopes !!!
There's no bar of any sort in any OS as not establish connectivity through Activesync.Which Windows are you using,Active Sync will only work on WinXP and not on WinVista.
1.Disable any Firewall or Anti virus program,check connectivity now.
2.disconnect phone from usb cable,delete partneship from pc and phone.
3.Uninstall Activesync,reboot pc.
4.Get phone into bootloaders mode (multicolor screen),Hook up the phone with pc via usb cable,check if usb appears at the bottom of the bootloaders in the phone,if it's there than,it's establishing connection with phone,if not then,there's a problem either in anyone one of these :-
a) USB cable , b) mini usb port of the phone c) Usb port of the PC.
Dig out the problem and rectify accordingly
Cheers !

Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....

DiCham said:
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
Click to expand...
Click to collapse
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.

when it set to advanced networking it should give up a network device
in the network connections folder
rightclick this network device and choose properties and in there
uncheck the kaspersky protocol (not uninstall)
you can also try to uncheck the advanced network setting on the wizard

japsfinest said:
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
Click to expand...
Click to collapse
Sadly, I have no development upto now because I have no time to reinstall Windows in 2nd PC! I hope it will help... thinking about USB driver/controller reinstall first, it will take less time than whole WindowsXP...
japsfinest: do follow da_jojo, it worked!
da_jojo: thanks very much! It work but unfortunately, i'm right on reinstalling Windows! hehehe....

USB not recognizing :( please help

Hi there, I have this weird problem.
For some reason my S710 stopped being recognized over USB. But it does recognize when using BT. I am on a MacBook (also running winXP), but it used to work and sometime after I succeeded in making data transfer work using BT the USB stopped working. does this make sense?
What's also weird, the last S710 I had would only connect of USB, never using BT.
Not sure what to do next. please help.
thanks in advance.

So I managed to get the USB working with Mac, but Activesync still does not recognize teh phone when going through the setup procedure, it just stays at teh USB available page of the process. can anyone suggest something?

ecoguy said:
So I managed to get the USB working with Mac, but Activesync still does not recognize teh phone when going through the setup procedure, it just stays at teh USB available page of the process. can anyone suggest something?
Click to expand...
Click to collapse
I guess you need an new ActiveSync profile in the S710.
Unplug the phone from USB first!
Goto CommManager, start the '8' (activesync). Choos menu, options.
Now press Menu again and remove the 'old' profiles.
Reconnect the phone via USB and now you should be able to create a new profile.

Problem syncing with HTC Desktop Cradle

Hi,
Just bought the official cradle from HTC, plugged it into my PC, but it generally won't sync at all, or when it does it loses the connection again after a few minutes.
Most of the time, once connected, activesync will do nothing at all for about a minute, and then comes up with a dialog saying unable to connect
Also, the light around the touch sensitive button still illuminates to show that it's charging. So there's definitely a connection.
Any clues?

^bump
Can anyone help? I've added a bit more info which might help to diagnose.

I also got the original HTC desktop cradle and it works like a charm for me.
But what you could try is
Start -> Settings -> Tab Connections -> USB to PC and uncheck "Enable advanced network functionality".
This normally solves USB connection problems.
HTH

You're a genius! I could kiss you! XD

DeepThought said:
I also got the original HTC desktop cradle and it works like a charm for me.
But what you could try is
Start -> Settings -> Tab Connections -> USB to PC and uncheck "Enable advanced network functionality".
This normally solves USB connection problems.
HTH
Click to expand...
Click to collapse
Hi DeepThought, have you got an answer for "Windows Mobile Device Center" sync with HTC Pro? I have got vista x64 and it won't sync with MS Outlook

GaZ said:
You're a genius! I could kiss you! XD
Click to expand...
Click to collapse
I'm glad I could help, but please leave it at a hug!
(except if you are the new bond girl )
Cyber-mate said:
Hi DeepThought, have you got an answer for "Windows Mobile Device Center" sync with HTC Pro? I have got vista x64 and it won't sync with MS Outlook
Click to expand...
Click to collapse
Hi!
It just doesn't want to sync with outlook or it does not want to connect at all? If it doesn't want to connect at all: have you tried changing the setting above?

DeepThought said:
I'm glad I could help, but please leave it at a hug!
(except if you are the new bond girl )
Hi!
It just doesn't want to sync with outlook or it does not want to connect at all? If it doesn't want to connect at all: have you tried changing the setting above?
Click to expand...
Click to collapse
It connects & I could explore except that when I select device setup or sync, there when it triggers the error!

Cyber-mate said:
It connects & I could explore except that when I select device setup or sync, there when it triggers the error!
Click to expand...
Click to collapse
You could try to delete the WMDC Partnership when your TP is not connected and than reconnecting your phone. It should as you for a new partnership then and also give you the possibility so sync it with outlook.

Activesync won't recognize Raphael,...

hello everyone,
I cannot get Activesync to recognize my htc touch pro no matter what i do,... i've uninstalled and reinstalled shut everything off then on, followed all of MS's advice, and nothing works,...
Any suggestions,...? No problems connecting my tytn II and my hermes,...
thanks,
ek

Are you running any firewall software? If so, this is relevant to you.

start>>settings>>connections>>usbtopc>> un check the "enable advanced network functionality"

sorry attnoob, was trying for your quick fix, but it didn't work,... thanks anyway,... now will go to the firewall issues noted above, but i already opened the ports as per ms's recommendations in help,...
will try other suggestions and get back to you,...

ok, so allenh, read all the info at the link you sent me, and actually did all these things yesterday, but it didn't work,... also, something strange happens when i hook the device to the PC in that, the device immediately goes to the 'internet sharing' program you use when tethering, it establishes a connection with the internet, and there is a comments saying 'check usb cable connection' and this never happened with the tytn II,...
your help is appreciated,...
ek

Check the USB cable
It seems the USB cable the Tilt uses and the one the Raphael/Fuze use are different, If i use the cable that i usued with my tilt the computer would not recognize the Fuze it will charge it though, only if i use the usb cable that came with the Fuze it works fine.

Are you using the stock ROM or a cooked ROM. Some of the new cooked ROMS are having this problem.

Also, are you using Vista or XP. The problems seem to be with XP.

my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.

btw, it didnt start doing this until i flashed NATF's v2.1 and also loaded a custom theme and toolbars and such.... it worked after i loaded NATF's rom, just randomly stopped at some point after that.

if you are putting on a new rom then put the phone in bootloader mode it worked for me

LostcauseZ06 said:
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
Click to expand...
Click to collapse
My Fuze is doing this too, excep every single time. I can't get Activesync to work through USB. And I'm running the stock ROM. Internet Sharing automatically connects.

Okay, I set Internet Sharing to Bluetooth PAN (instead of USB), which kept it from automatically starting when I plugged in the USB. This let ActiveSync and the 'choose a connection type' startup on my Fuze and everything has been fine.

Try your PC Network settings
Hi,
I have the same problem recently. My AS does not want to recognize my Raphael. What I did was go to the network setting of the PC (Network Connections) and disable the 1394 adapter. Then my AS now can recognize my Raphael. The next unsolved thing is how to make the connection stable enough to make happen the syncing.
Drax

Hi, I had similar problem. Once upon a time the connection between my Touch Pro (WM6.5.3) and PC stopped working. Activesync did nothing and after a minute gave error message with troubleshoot guide. So I opened control panel ---> device manager (with mobile connected via USB), where I found "Windows mobile based device" between network adapters. I opened it and under it's advanced settings I found "network address" which was set to "unavailable". So I changed it to 192.168.2.2 and now it works again ;-)
Hope it helps someone ;-)

Activesync problem

Hi.
When i connect my touch pro to my laptop my touch pro thinks he is charging. I tried another laptop/cabel/ROM but it doens't matter.
I can't get a connection with my phone.
Any idea's?

Don't you get asked, what to do, when you connect the TP to your laptop?
Maybe it connects as Harddisk? Do you get a removable device in your laptops file explorer after connecting?
Check settings of your TP in connections - USB to PC.

bare242 said:
Don't you get asked, what to do, when you connect the TP to your laptop?
Maybe it connects as Harddisk? Do you get a removable device in your laptops file explorer after connecting?
Check settings of your TP in connections - USB to PC.
Click to expand...
Click to collapse
Hi,
No, i don't get asked and the settings are good.
It's strange, because it is suddenly.

I had this problem last week and it turned out to be the cable I was using....but I guess you already tried that. How many cables you try? Maybe get another one and try it...

TechnoHippie said:
I had this problem last week and it turned out to be the cable I was using....but I guess you already tried that. How many cables you try? Maybe get another one and try it...
Click to expand...
Click to collapse
Well, i tried 3 different cables. The only thing i changed is the cable in my car. last week i was i Italy and by car charger has gone dead. And i buyed another one. that's all..

Anyone?...

hardreset?

Hard-reset, new ROM, new Radio... nothing helps

Reinstall activesync.
Try another laptop/computer.
Otherwise I don't know.

bare242 said:
Reinstall activesync.
Try another laptop/computer.
Otherwise I don't know.
Click to expand...
Click to collapse
Deed.. nothing

Maybe you can find some new ideas here.

my phone sometimes just charges without activesync but that's only when i have wifi on 0.o if i turn wifi off then the phone syncs.

No luck... tried everything.

Well,I have similar issue with AS.
It starts suddenly and now I am unable to connect.
When I have enabled "Faster data synchronization",then the green icon keeps rotating for a while,but ends with an errormessage. When I uncheck it,AS absolutely doesn't see TP,no attempt.
My cable is working,because I am synchronizing also a HTC Hurricane(SDA2) without any problems.
I have also tried another PC,no luck,same symptoms.
Mass Storage and Internet sharing is working also perfectly.
Mainly I tought,that the IP connection is firewalled,but when it doesn't work also on another PC,that was working before,I have no more ideas.