Hi all,
how can I listen of an key in the registry using c# ?
http://www.google.dk/search?source=...registry+c#&btnG=Google-søgning&meta=lr=&aq=f
Rudegar said:
http://www.google.dk/search?source=...registry+c#&btnG=Google-søgning&meta=lr=&aq=f
Click to expand...
Click to collapse
thx for the link, but that's not what i want!!
I want to listen not to read a registry key!!
I'm programming a soft that catch the movement of the phone and switch his profil ( vibrate to ring mode ).
there's a registrykey witch modify when the soft run, so i want to listen to the registry to know when the key switched...
[sorry, damn, mistaken attempt :S]
not sure if there is an event you can sign up to to
but guess you could just make a program running in a loop reading
the reg every x sec / min
and detect if it's changes
and the link i gave told how to read a reg val too
Related
Hi,
I flashed WM6 - crossbow 1.5 - on a french qtek so I have a french keyboard. I tried to change the registry with the registry editor Total commander; I opened the program on the device and went to [HKEY_CURRENT_USER\ControlPanel\Keybd]. I created a New String Value name: Locale; I typed in the Value Data: 040c (for french keyboard) and I held the powerbutton for a few seconds until asked if I really wanted to switch your device off, and clicked on YES then restarted it...
and I am still in QWERTY mode when I type on my AZERTY keyboard :-(
Any ideas?
Cheers,
GG
g4gee said:
I flashed WM6 - crossbow 1.5 - on a french qtek so I have a french keyboard. I tried to change the registry with the registry editor Total commander; I opened the program on the device and went to [HKEY_CURRENT_USER\ControlPanel\Keybd]. I created a New String Value name: Locale; I typed in the Value Data: 040c (for french keyboard) and I held the powerbutton for a few seconds until asked if I really wanted to switch your device off, and clicked on YES then restarted it...
Click to expand...
Click to collapse
Did you wait 30 seconds to 1 minute before turning off the phone? In WM6 registry entries can be lost if you change them then immediately soft reset the device. Is your registry change still there? If not try again. If it is, I'll have to defer to someone that knows more about switching the keyboard type.
thanks for your answer.
I indeed for sure did not wait any time before soft reseting the phone
Althoug now I waited one minute... it still not working
I am locked into an english keyboard. I can see the registry entry being there and being the one I made and .. not working...
Should I change anything else to make it work?
Thanks for helping me in advance
Cheers,
GG
mfrazzz said:
Did you wait 30 seconds to 1 minute before turning off the phone? In WM6 registry entries can be lost if you change them then immediately soft reset the device. Is your registry change still there? If not try again. If it is, I'll have to defer to someone that knows more about switching the keyboard type.
Click to expand...
Click to collapse
Hi, thanks for your Help and for your Crossbow 1.7 Reloaded mfrazzz !
But i always have trouble with my keyboard who is in "qwerty" and i can't put ii in "azerty". Can U describe type of new registry key that we must create to change keyboard?
Thank you
hi,
can anyone tell me how to disable T9 perminently via a reg hack? i am using wm6 and i have done the alt-space bar command, but sometimes at power up the t9 mode restarts and does not allow me to enter numbers so i cannot unlock my device and end up hard resetting it. i think this will be easier then bypassing the device lock password.
thanks
If you want to enter numbers, you should be able to just hold down the button that has the number. For example, to enter a "2" press and hold "E".
thewayne said:
If you want to enter numbers, you should be able to just hold down the button that has the number. For example, to enter a "2" press and hold "E".
Click to expand...
Click to collapse
thanks for trying, but i am not new to smartphones and i have already covered all the basics. thats why i am looking for a registry edit.
there isn't one as far as i know.
on the S621, you just press the FN key and SPACE bar key together and you can choose your default input.
Cheers
S.
stevencwong said:
on the S621, you just press the FN key and SPACE bar key together and you can choose your default input.
Cheers
S.
Click to expand...
Click to collapse
i take it you didnt actually read the very first post in this thread.......thanks for trying but reading the question usually leads to a better result, lol
Strange... mine stays off with alt-space until I turn it back on -- through multiple reboots, even after one of those endless-rebooting sessions...
my problem is random. it will work fine for a couple of reboots, then lock up, or sometimes it will not get past the first reboot. very frustrating as i am on the road all day i rely heavily on my smartphone. looks like i will be waiting for a rom upgrade
I Have a S620 Italian..
How to activate T9 or similiar?
Thanks
to turn t9 off on an S620 wm6
in
\HKLM\Software\Tegic\eT9\ME
st both DefaultInputModule and TextInputMode to 0
enjoy
dammit, i tried that reg edit on my shadow, and now the keyboard doesnt work at all, so i cant even change the reg edit back!! anybody have any ideas?? can i edit my phone registry from my computer?? thanks
omar
omaralt said:
dammit, i tried that reg edit on my shadow, and now the keyboard doesnt work at all, so i cant even change the reg edit back!! anybody have any ideas?? can i edit my phone registry from my computer?? thanks
omar
Click to expand...
Click to collapse
You can use CeRegEdit to edit your registry from your computer
still waiting for a way to completely disable T9
HKLM\SOFTWARE\Tegic\eT9\IME
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
Can anyone recommend a good key lock program? Right now i am using the one included with Smarttoolkit but i find the back light still comes on too frequent when some buttons are touched while in my pockets. I think it is killing my battery time.
Thanks
autokeylock or maybe it's "auto key lock"
pretty sure it's one word. search the forum for it. just do your reading because you may need to adjust your registry setting as it tends to set your display timeout to 7 seconds. Works fine after you regedit that oddity out.
It's free too.
It's also available in most WM6 ROMs.
Exitao said:
autokeylock or maybe it's "auto key lock"
Click to expand...
Click to collapse
<shamelessplug>Correct would be Automatic Keylock</shamelessplug>
pretty sure it's one word. search the forum for it. just do your reading because you may need to adjust your registry setting as it tends to set your display timeout to 7 seconds. Works fine after you regedit that oddity out.
Click to expand...
Click to collapse
If something like that happens, it's inside Windows Mobile. Automatic Keylock does _not_ touch the display timeout.
maniac103 said:
<shamelessplug>Correct would be Automatic Keylock</shamelessplug>
If something like that happens, it's inside Windows Mobile. Automatic Keylock does _not_ touch the display timeout.
Click to expand...
Click to collapse
It seems to have something to do with the registry holding the the non-keylock settings and the keylock settings.
It's this key:
[HKEY_CURRENT_USER\ControlPanel\Power\LockLevel]
Quite e few threads/posts with people crying because their screen times out too fast (7secs). Changing the value to "0" fixes it.
I wondered if it had something to do with some keys being in hex and others in binary.... So if a hex/binary/decimal value is entered into a binary/decimal/hex key, it sets the wrong timeout.
I often see people post the same registry keys and the values are not in the same entry system (how do I express this thought?). Of course this is with all kinds of things, not just the above registry key.
I have a real mishmash in my audiogain keys. some are hex, e.g. C7, some are plane decimal values and some are binary. Makes it difficult to tweak when it's not obvious what you're looking at.
Hi guys
When I connect the phone with the usb cable activesync makes a BEEP every 5 minutes. I cannot find the registry key to disable this. Anyone know it?
BTW i'm trying to disable the BEEP when I press the red HANG key. I know the sound played is "dpadctl.mid" and I disable it on all the registry keys it appears, reset, and is still making that sound everytime i press that key.
It might help a little too if you told us what Phone Device you are using and what ROM/Radio you are using.
I don't think it helps too much since the registry keys for events are the same for all windows mobile phones with WM5 and WM6.
I got a TyTN (HERMES 200) with Super D-Lite ROM.
Please close thread.
I found the solution disabling the active sync sound. (well, that's more a workarround than a solution)
And for the HANG KEY i found more registry keys with the sound. I previously missed it cause i searched '\windows\dpadctl.mid' and not 'dpadctl.mid' directly.
I hope this is usefull for somebody.
Hey Man Im Having The Same Exact Problem On My T-Mobile Wing How Do I Disable That I Only Find That dpadctl Sound in Windows File Explorer windows/ Can You List A Step by Step to Disable It ?
HTC TP2, TMobile
WM Prof 6.1, TF3D turned off (as much as possible)
When I read an email message, the left soft key says Reply All. Being lazy, I use that key everytime I want to reply. But when the message it sent to many people, I forget and still use that key. And it has proved embaressing.
I want to change the soft key to Reply.
Anyone know how I can do this? Thanks.
Gonna bump this because its annoying the hell outta me....
Looking for a solution for HD2.....
Tried the reg edits........
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\ShowReplyAllEmailSK change 1 to 0.
I dont have the values by default and creating them doesnt seem to work....
The touch pro 2 method doesnt work either as those reg entry are not present either.....
Anyone got any ideas????