Hello , this is my first post here so here it goes
My contacts application open up for a split second then closes itself.
I have tried installing a bare bone rom with nothing selected but ExtRom unlock
and yes i have done hard reset.
I have an alltel apache. I read a couple of post about this but none of those seem to apply to my case , since i got nothing selected. Please help i have flashed 22 times already and I'm pulling out my hair!
They guys at ppc Kitchen have tried to help me but nothing seems to work , my contacts app works just fine with the stock rom
I have tried Funcontacts and it wont let me add contacts
I have tried a few other contact managers and they wont come on either!
thanks
Related
I am trying to install nghianga's rom, but anytime the installation ends normal (seems to), but the S200 only ends up in bootloader mode and whatever I try, it doesn't change. I have read a few posts about this problem, but I did't find any solution.
I know that I am not an experienced Prophet user, but I would like to have some installation help with this. Also I can't find the NB_Update_nghianga rom, maybe it works better with this one.
thx
The same for me.... please can help us?
You MUST downgrade to a relevant v2.2 ROM first, then upgrade
JD
Sorry JD, I tried this too, no success!
Maybe try going back to a 2.2 and try then to install smart1's Excellent clean rom and see if this works, then think about the other rom?
JD
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Don't forget this is a WM6 file, there will be a lot of programs that do not run correctly, this is not a problem of the rom, but more a problem of the software you are trying to install. Try to play with the ROM clean after a hard reset and install a little at a time
HTH
JD
eddyve said:
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Click to expand...
Click to collapse
Hi JD, I nderstand the WM6 issue, but a number of problems are really bgging me:
1) sync doesn't work and even more erased everything on my device
2) IR does not work, I bought a Prophet to se IR
3) when I tried to add a number in speed dial I receive a message that there is not enough memory available!
4) etc.
thx anyway for your response
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
step 1. Read more carefully the sticky post
user0000 said:
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
Click to expand...
Click to collapse
You're not unlocked. You actually skipped the first and very important step of flashing back to an older ROM to get your IPL/SPL to an earlier version.
Follow these instructions VERY carefully and don't skip over any parts at all. Read through it once or twice before starting any of the steps.
(these instructions are for G3 devices, for G4, go here)
Good luck!
Thanks for the help guys.I'm managed to come right with the ShellTools app.
The only problem I've had with WM6 is that when I click on the contacts soft button (or click it from the menu) it starts loading then disappears. I can't access it at all. Everything else seems fine though. Any ideas?
I remember that fault occurring with some of the roms though I dont specifically remember which rom, possibly some of the 318 builds. From memory I fixed this by doing another hard reset.
Thanks for al the assistance. I've flashed the XDA Mobile 6 Release 2a and am very happy.
WM6 has much much better wireless lan support. With the stock standard wm5 my kjam wouldn't connect to my WAP2 configured network, now it work! Great job on packing the Roms guys.
On the matter of the the contact not appearing / working. The following would happen: Once WM6 was flashed, and a hard reset done the usual process of initialization took place, which included screen alignment, time and time zone configuration, setting of a password and then the part that seemed to be causing the problems, the setting up for a email account/messageing. I on numerous occations skipped the setting up for email as I won't do email on the device. Once 'botted' the device would work fine with the new ROM the only problem would be that when I pressed the 'contacts' soft key or selected it from the menu the contact 'application' would seen to start up but die or6 not appear. This means that the title/top bar would display the title of the contact application but would in a fraction of a second die / abort / crash.
I assume that the email / messaging part of the hardboot startup sets up something that is required for the contacts application. Just for reference I just setup the email/messaging details (name, email address, pop server, username & password). After setup I didn't check email once, I then just deleted the email account setup and the contacts app is still working.
For newbees, I recommend the ShellTool applications, it allowed a new Wizard owner and newbee rom flasher to get a new rom flashed very easlily. My Wizard was a G4 with the 'recent' IPL/ISL bits so I can't speak for G3 users.
Nice one guys, great forum. I'm verry happy with my WM6 kjam.
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Try finding the cab "sdkcerts.cab" to disable certificate checks and try it else reflash the rom once again and try.
fyi, the rom you're flashing is a WM6.0 build and NOT wm6.1
Fix?
Had the same issue, but it was related to a file that was removed from the windows directory search the ROM thread I think the file was something like olce?.dll to confirm its the same issue try installing isilo and see if the same error happens.
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
No, he’s just confused between WM 6.0 and WM 6.1 it did take me a while to realize I am not superman too.
WizP said:
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
Click to expand...
Click to collapse
firestormer said:
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Click to expand...
Click to collapse
Hi,
Just remove sddaemon.lnk from windows/startup folder.
(when in doubt, just paste this file elsewhere)
greetings,
Wout
I am getting the same thing. None of these "fixes" has any effect whatever. I thought this was a thread full of knowledgeable persons. Why all the stab-in-the-dark answers? Doesn't anybody know what REALLY causes this trouble?
So i started building this rom for my AT&T Tilt a few days ago and i have run into a few issues i was wondering if anyone else has encounterd them and knows a fix. Ive been doing alot of searching and googleing and haven't found alot of answers.
1st i started out using alex's 3.03 winmo 6.1 htc rom. I had issues with the camera not working with radio 1.65 so i flashed to radio 1.64. But i was still having a problem with the device not doing a soft reset unless i physically push the button. So i searched around and my findings lead me to believe there is no fix for this so i need to use version 3.02. Then i went and got version 3.02 and when i rebuilt the rom everything seemed fine but there is no links to the hardware buttons in the settings applet for buttons. Is this a common issue i cant find anything about this anywhere??!
2nd when building packages sometimes they dont work... Ive built a few packages and they all turn out fine Ive run into some problems with the shortcuts but editing the initflash by hand fixes it everytime. Some packages ive made though just dont work, they install fine but when i run the app i get a component missing error, the weird thing is the cabs i used to intall these packages have no issues what so ever, an example would be frNotepad 1.2 if anyone has ever tried to turn that into a package.
Last question i have is how do you set up a defualt theme I noticed the htc theme package in alexs oem packs sets its self up as the defualt theme i looked through it did a search on cusTSK didnt find much info. So i tried to rename my theme to htc.tsk and just replace the theme file in the htc theme package but that just screwed the whole theme up.
1st i started out using alex's 3.03 winmo 6.1 htc rom. I had issues with the camera not working with radio 1.65 so i flashed to radio 1.64. But i was still having a problem with the device not doing a soft reset unless i physically push the button. So i searched around and my findings lead me to believe there is no fix for this so i need to use version 3.02. Then i went and got version 3.02 and when i rebuilt the rom everything seemed fine but there is no links to the hardware buttons in the settings applet for buttons. Is this a common issue i cant find anything about this anywhere??!
Click to expand...
Click to collapse
Look for the file 47d2a96e-f0dd-40e1-8f5b-a8cdc083a165.rgu and in it is the registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys. This contains which application the hardware button will launch when pressed.
For the reset issue, 3.03 ROM have some problems. Upgrade to a more newer ROM. I created my own LITE ROM Folder similar to Alex. You can check my post at http://forum.xda-developers.com/showthread.php?t=399733. It is based on 3.28 official ROM.
2nd when building packages sometimes they dont work... Ive built a few packages and they all turn out fine Ive run into some problems with the shortcuts but editing the initflash by hand fixes it everytime. Some packages ive made though just dont work, they install fine but when i run the app i get a component missing error, the weird thing is the cabs i used to intall these packages have no issues what so ever, an example would be frNotepad 1.2 if anyone has ever tried to turn that into a package.
Click to expand...
Click to collapse
When building packages, double check the initflashfiles.txt to make sure the shortcuts are correct. For the component missing error, CAB and ROM Packages is not entire identical. In CAB, you can create the shortcuts without the need for the included LNK in the packages and initflashfiles.txt, but for ROM Packages, you need both files. So basically if the CAB works, it doesn't mean the ROM Package will also work.
Hi there. As a noob i couldnt ask directly to perdita2000 about his ROM ([ROM] TESLA RC5); so as vBulletin Message said, my only way to do it's using (i hope on right way) this zone.
Well, i installed his rom and it works fine .. then, i installed too googles apps (Latest Gapps) to try to link my phone (HTC HERO G2) to my own google account... after many tries i couldnt established connection between them. I would like to know if is there a way to locate the point of this problem.
By the way,i browsed fine on internet even i checked my google account on the default browser
Thanks for your time.
sorry to bother all of you.. as noob , i didnt try the usual way to solve things.. reset, re-install,reboot... after i did it .. it seems it fixed itself..