I am trying to install nghianga's rom, but anytime the installation ends normal (seems to), but the S200 only ends up in bootloader mode and whatever I try, it doesn't change. I have read a few posts about this problem, but I did't find any solution.
I know that I am not an experienced Prophet user, but I would like to have some installation help with this. Also I can't find the NB_Update_nghianga rom, maybe it works better with this one.
thx
The same for me.... please can help us?
You MUST downgrade to a relevant v2.2 ROM first, then upgrade
JD
Sorry JD, I tried this too, no success!
Maybe try going back to a 2.2 and try then to install smart1's Excellent clean rom and see if this works, then think about the other rom?
JD
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Don't forget this is a WM6 file, there will be a lot of programs that do not run correctly, this is not a problem of the rom, but more a problem of the software you are trying to install. Try to play with the ROM clean after a hard reset and install a little at a time
HTH
JD
eddyve said:
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Click to expand...
Click to collapse
Hi JD, I nderstand the WM6 issue, but a number of problems are really bgging me:
1) sync doesn't work and even more erased everything on my device
2) IR does not work, I bought a Prophet to se IR
3) when I tried to add a number in speed dial I receive a message that there is not enough memory available!
4) etc.
thx anyway for your response
Related
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
step 1. Read more carefully the sticky post
user0000 said:
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
Click to expand...
Click to collapse
You're not unlocked. You actually skipped the first and very important step of flashing back to an older ROM to get your IPL/SPL to an earlier version.
Follow these instructions VERY carefully and don't skip over any parts at all. Read through it once or twice before starting any of the steps.
(these instructions are for G3 devices, for G4, go here)
Good luck!
Thanks for the help guys.I'm managed to come right with the ShellTools app.
The only problem I've had with WM6 is that when I click on the contacts soft button (or click it from the menu) it starts loading then disappears. I can't access it at all. Everything else seems fine though. Any ideas?
I remember that fault occurring with some of the roms though I dont specifically remember which rom, possibly some of the 318 builds. From memory I fixed this by doing another hard reset.
Thanks for al the assistance. I've flashed the XDA Mobile 6 Release 2a and am very happy.
WM6 has much much better wireless lan support. With the stock standard wm5 my kjam wouldn't connect to my WAP2 configured network, now it work! Great job on packing the Roms guys.
On the matter of the the contact not appearing / working. The following would happen: Once WM6 was flashed, and a hard reset done the usual process of initialization took place, which included screen alignment, time and time zone configuration, setting of a password and then the part that seemed to be causing the problems, the setting up for a email account/messageing. I on numerous occations skipped the setting up for email as I won't do email on the device. Once 'botted' the device would work fine with the new ROM the only problem would be that when I pressed the 'contacts' soft key or selected it from the menu the contact 'application' would seen to start up but die or6 not appear. This means that the title/top bar would display the title of the contact application but would in a fraction of a second die / abort / crash.
I assume that the email / messaging part of the hardboot startup sets up something that is required for the contacts application. Just for reference I just setup the email/messaging details (name, email address, pop server, username & password). After setup I didn't check email once, I then just deleted the email account setup and the contacts app is still working.
For newbees, I recommend the ShellTool applications, it allowed a new Wizard owner and newbee rom flasher to get a new rom flashed very easlily. My Wizard was a G4 with the 'recent' IPL/ISL bits so I can't speak for G3 users.
Nice one guys, great forum. I'm verry happy with my WM6 kjam.
I have just finished a quick lite rom based on Helmi_ C AKU 0.70 rom which I find very stable even for a beta.
Everything Remains the Same apart from what I took out the rom which as follows:
1. Htc audio manager
2. HTC HOME Plugin
3. Office Mobile
4. OneNote Mobile
5. BT_FTP=1_2_30490_1
6. JbedJava_MIDP=0_0_20070726_1_1
7. HTC task manager
8. Voice Speed dial
9. WindowsLive
Rom is working fast with only one bug which i'm trying to fix which is:
After Flashing the rom and after configuration and reset the rom wont boot. But if you reset it before CONFIGURATION the rom works ok as normal. very strange.
I will try to fix it but I have got all the configuration cabs which can be install manual. These files are:
1. Configure_COMgr175.CAB
2. Configure_DDI171.CAB
3. Configure_GPS.CAB
4. Configure_Key.CAB
5. Configure_WLAN.CAB
6. WiFicountrycode.CAB
Total storage memory is 133.16 mb and free program is 74.15 mb
Cabs can be found in my thread which is located here.
http://forum.xda-developers.com/showthread.php?t=332438
Link>>> Rom has got more work to do will fix it as soon I got some more time.
Still a problem with configuration just soft rest before config starts.
Install config cabs below, enjoy
Thanks to POF and OLIPRO for all there hard work and tadzio with contributing in helping us with customising his tools so they can work for kaisers. And thanks to everyone who was helping with the kaiser project.
I will be making or modyfing roms as lite as possible which I think is the best way to go as programs gets updated regular.
reservation
Reservation for updates
cant wait for this lite rom! please dont forget to take out extra junk like windows update and windows live messenger. The more lite the better
duttythroy said:
Coming Soon
Click to expand...
Click to collapse
Why do you do thisto us?
I hope soon means very soon soon
The rom is working fine just need to reset befor it starts its configuration. I will post it as soon as I can. If I find the fix I will post the fixed rom with more stuff taken out the rom.
link is up
link is up
Still a bug with config but cabs are available for now
Awesome, this is the lite ROM I was looking for! Will try it out asap.
cheers
maryjos said:
Awesome, this is the lite ROM I was looking for! Will try it out asap.
Click to expand...
Click to collapse
helmi_c done a great job with the rom I didnt have to do nothing with it might strip it down further for who love ultr lite roms but not losing any stability of course
There is more work to be done on this rom
I realise there is more work to be done on this ROM. First I forgot and allowed the configuration to go on. So I had to reflash (forgot HR would do) and prevent installation of the configuration. I then installed the cabs posted, but device refused to boot after soft-reset
So I am back on Helmi's ROM.
Dutty, you must have removed the power icon in settings as I could not find it to see how much longer I could go on trying to revive my device without running out of power
victoradjei said:
I realise there is more work to be done on this ROM. First I forgot and allowed the configuration to go on. So I had to reflash (forgot HR would do) and prevent installation of the configuration. I then installed the cabs posted, but device refused to boot after soft-reset
So I am back on Helmi's ROM.
Dutty, you must have removed the power icon in settings as I could not find it to see how much longer I could go on trying to revive my device without running out of power
Click to expand...
Click to collapse
same here I must have deleted something in the rom I also found huge battery drain my highly suspicions are one of the activation cabs is causing this.
Sorry guys my first rom didnt made it as yet will pull it down as i think its not stable.
Cheers
My apologies
I have taken down the rom found a huge battery drain in rom.
Well, I installed it and everything went okay. Installed the extra cabs and looked good. I wanted to try WisBar instead of the start menu app I'd been using before so installed their latest versions. Whoops that made a total mess of things, locked up at the end of install and still was locking up after soft resets. So had to hard reset and start all over again. I've not used this app before, so not sure if it was the ROM causing the problem or not.
duttythroy said:
I have taken down the rom found a huge battery drain in rom.
Click to expand...
Click to collapse
Ah, okay, yeah I've continued to have problems with it, keeps locking up on me when doing a soft reset. So guess it wasn't wisbar that was the problem. I'll go back to the standard HTC Rom for now.
to moderators
Can you please close this thread as lite rom has been made by helmi so thus all support should be in that forum. thanks
Hi all, im new here in terms of posting but have been reading for a while now.
I have a Plam Treo 750 vodafone which is unlocked. I installed vodafone wm6 update on it a month ago... but since then i've stopped using the phone due to this:
I'm used to fast systems such as my linux desktop and i was really frustrated how the wm6 interface is slow. Even with few progs installed the phone gets very sluggish and hanging up calls even takes time.
Now here's my question:
Is there any way to speedup WM6 ? or install a custom WM6 that is faster ?
I tried Rest of the World wm6 ROM but it wouldn't install on my phone when i opened the installer it would say not compatible.
Would this speedup my phone ?
http://forum.xda-developers.com/showthread.php?t=345748
What should i do... i really love the phone and its features... but i just want wm6 to run faster so that the phone is usable.
thanks
blip said:
Hi all, im new here in terms of posting but have been reading for a while now.
I have a Plam Treo 750 vodafone which is unlocked. I installed vodafone wm6 update on it a month ago... but since then i've stopped using the phone due to this:
I'm used to fast systems such as my linux desktop and i was really frustrated how the wm6 interface is slow. Even with few progs installed the phone gets very sluggish and hanging up calls even takes time.
Now here's my question:
Is there any way to speedup WM6 ? or install a custom WM6 that is faster ?
I tried Rest of the World wm6 ROM but it wouldn't install on my phone when i opened the installer it would say not compatible.
Would this speedup my phone ?
http://forum.xda-developers.com/showthread.php?t=345748
What should i do... i really love the phone and its features... but i just want wm6 to run faster so that the phone is usable.
thanks
Click to expand...
Click to collapse
Got it right mate! Nice research!
can anyone please help me install "WM6 AKU0.7.0 WWE Cooked ROM Lite"...
http://forum.xda-developers.com/showthread.php?t=345748
I've never done something like this before and have no idea how to begin.. I can't find any guides only random text throughout the posts so i don't know what applies to me and what doesn't. I'm really worried about damaging my phone by doing something stupid.
My Phone:
750v from vodafone UK with vodafone wm6... but it was unlocked by previous owner... since i can use it on other phone providers in other countries. I have usb cable and 1Gig microSD.
The installation notes of the rom say i need to install Hard-SPL then flash radio then flash OS. Now for Hard-SPL do i need to install it if my phone is unlocked because i read some confusing posts there... then what is a radio flash do i need to do that ? how does it affect radio...
then after that i need KaiserCustomRUU.exe to flash the rom... i only found a post about CustomRUU with "RUUWrapper.zip" is that the same thing... sorry but i'm really confused and need someone to guide me through the process for my first time if possible.
You are ready to go. Download the ROM from Chaimd on the 750 Upgrading thread, rename it to CHEEIMG.nbh (the ROM file name the 750 expects to see) and copy it to the root of your miniSD card.
Insert the miniSD card, hold down the bottom right button on the side while you do a reset and the bootloader will start. And away you go.
Make sure you backup (backup program is best) all your data - it starts you out with fresh device and default settings. ROM works perfectly - fast and lots of extra storage.
txzman said:
You are ready to go. Download the ROM from Chaimd on the 750 Upgrading thread, rename it to CHEEIMG.nbh (the ROM file name the 750 expects to see) and copy it to the root of your miniSD card.
Insert the miniSD card, hold down the bottom right button on the side while you do a reset and the bootloader will start. And away you go.
Make sure you backup (backup program is best) all your data - it starts you out with fresh device and default settings. ROM works perfectly - fast and lots of extra storage.
Click to expand...
Click to collapse
Thanks txzman for the info. But just to be sure i understand... you're saying i don't need to install Hard-SPL from:
http://forum.xda-developers.com/showthread.php?t=334100&page=1
Nor do i need to flash the radio ?
UPDATE:
ok i didn't install Hard-SPL or flash the radio.
I tried to install the rom straight away... i put the ROM on my memory card root and renamed it, then did the reset with sidebutton...and i got to the wierd colors screen and nothing happenes after that.
It says on the screen:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
In the end nothing happens... this method doesnt work. i tried using KaiserRUU.exe update method but also that doesn't work it gives me and "Error [260]: Connection" even though activesync is connected... please tell me what i can do to install this rom.
i posted the question in the thread for the cooked rom. i guess this is not the right place to ask thus no one is replying.
sd needs to be formatted fat32 - re-format card to fat32, re-copy cheeimg and try again. Google or search here for the available formatting apps.
INSTALL HARD-SPL FIRST....
i can't stress this enough...
blip said:
Thanks txzman for the info. But just to be sure i understand... you're saying i don't need to install Hard-SPL from:
http://forum.xda-developers.com/showthread.php?t=334100&page=1
Nor do i need to flash the radio ?
Click to expand...
Click to collapse
If your Palm Treo is unlocked, you still need to install Hard SPL but just run step 1 and ignore step 2 & 3. This will allow you to flash your Treo with ROM's other than your provider as well as modified/cooked ROM's like the one made by Chaimd.
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Try finding the cab "sdkcerts.cab" to disable certificate checks and try it else reflash the rom once again and try.
fyi, the rom you're flashing is a WM6.0 build and NOT wm6.1
Fix?
Had the same issue, but it was related to a file that was removed from the windows directory search the ROM thread I think the file was something like olce?.dll to confirm its the same issue try installing isilo and see if the same error happens.
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
No, he’s just confused between WM 6.0 and WM 6.1 it did take me a while to realize I am not superman too.
WizP said:
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
Click to expand...
Click to collapse
firestormer said:
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Click to expand...
Click to collapse
Hi,
Just remove sddaemon.lnk from windows/startup folder.
(when in doubt, just paste this file elsewhere)
greetings,
Wout
I am getting the same thing. None of these "fixes" has any effect whatever. I thought this was a thread full of knowledgeable persons. Why all the stab-in-the-dark answers? Doesn't anybody know what REALLY causes this trouble?
EDITED
just found anoher thread about it soz, pls mod remove this
ahassouna said:
Hi all:
i've been playing around with some ROMS lately; some of us do use the arabizer application which enables you to read and write arabic language and also installs some other minor arabic programs on your device.
i have noticed some issues with some ROMS and need help in solving them, here are my observations:
Diamond Roms till V8 work with arabizer, but ofcourse the keyboard issue doesn't allow you to use the arabic keyboard and you need to install the IM default cab to get it to work.
Death Roms till v4.1 do not work at all; you just get install unsuccessfull even before it starts to install on first block, tried:
1- install from fresh upgrade didn't work
2- install from hard reset did not work.
3- installed net cf 2 and chose as default, did not work
4- installed net cf 3.5 on cf 2 and chose 3.5 as default did not work
5- tried on another handset still doesn't work
6- tried intsall on SD card
iat first i thought it was framework issue but i think it's not, it has to be something in the core which i know nothing about.
tried the ryV5 rom also has the same problem as death roms and would not install.
Can anyone help find a solution to this please as it would be great to get it to work on death and ryV5 roms and should be intresting to know why such application would not work, it might help in near future for other applications.
note: i chose to make a thread about this as i cannot post same question in each ROM thread
Regards,
Hasso
Click to expand...
Click to collapse
I have installed In4mobility software on all of the cooked 6.1 ROMs and it is running fine. The only issue I have is it always defaults to Arabic Keyboard, even when in same session but switching between programs. Other than that it is running great. I would install on Main Mem,,,,, avoid installing on SD card, it will become buggy, and might cause freezing.
Do a search for Informobility software. It is not that expensive.
asfoor said:
I have installed In4mobility software on all of the cooked 6.1 ROMs and it is running fine. The only issue I have is it always defaults to Arabic Keyboard, even when in same session but switching between programs. Other than that it is running great. I would install on Main Mem,,,,, avoid installing on SD card, it will become buggy, and might cause freezing.
Do a search for Informobility software. It is not that expensive.
Click to expand...
Click to collapse
i know it works but not the keyboard, and it crashes the device n regular bases and makes it really slow
imaginet arabizer is always the best choice