Database Info

Any UK MDA T-Mobile upgraders here?

I have MDA on T_Mobile UK and would like to upgrade to the latest rom but am confused by so many posts and different lanuages.
Could anyone just tell me
1) How to back my rom up incase of problems
2) How to get the latest english rom with the patch for more memory
3) How to install it
4) How to put all the t-mobile settings back ie GPRS etc
TIA

I have an MDA Compact from T-Mobile UK and I upgraded with the Q-Tek 1.11 ROM doing the rounds. I forgot all about the ext rom, but after I upgraded I restored a full backup I had created using Sprite Backup. I asked on this forum if restoring the backup negated the ROM upgrade in any way, but no-one seemed to know. Anyway, all the T-Mobile customisation came back and there have been no problems since.
AS soon as I can get a proper T-Mobile ROM I will upgrade with this.

hi mate after you restored your backup did you still have the qtek rom on the phone?

Yes. I get the qtek splash screen when I reboot, and if I go to 'Device Information' I get this:
ROM version: 1.11.00 WWE
ROM date: 03/14/05
Radio version: 1.11.00
Protocol version: 1337.42
ExtROM version: 1.01.128 WWE

Hi
Thanks for the reply how did you do the update was there any error messages that need to be ignored?
Also going to use sprite backup later have you got any tips?
Thanks

Not really - the whole thing was completely painless for me. Just follow the instructions to the letter.
Sprite Backup is great - I get it to automatically backup my PDA to an SD card each night so I always have an up-to-date backup.

Is there a trial version of sprite backup of do I have to buy it?
What instructions did you follow would be good to just do the same as you as it work rather than me stuffing it up.
Thanks

scgf said:
Not really - the whole thing was completely painless for me. Just follow the instructions to the letter.
Sprite Backup is great - I get it to automatically backup my PDA to an SD card each night so I always have an up-to-date backup.
Click to expand...
Click to collapse
cool whats your phone like now? is it any better?

My MDA Compact is really no different after the upgrade - it would be useful to know exactly what should be better. I still can't send files to it using bluetooth.
Last night I re-did the ROM upgrade but this time I reinstalled all my apps and only used Sprite to restore documents etc. rather than the whole system. I think this is a better way forward, although on Sprite's website there is a section on how to correctly use Sprite Backup to restore after a ROM upgrade - have a look at http://tinyurl.com/dhzrp
I downloaded a T-Mobile UK CAB file which adds back all the T-Mobile settings without the garish pink colour scemes.
The instructions I followed are in this thread http://tinyurl.com/863qt - as you work through you will get an idea of what to do. In there somewhere I seem to remember someone posted a simple guide.

I have a qtek s100 rom buymobiles.net or something like that.
I used the program to hack your own rom for Extended storage - made a safe backup first to keep on my PC, just in case, hacked the ROM, flashed it back on the phone and it worked fine. There are a number of error messages that come up, but they're all to be expected, but do follow the instructions carefully and they'll put your mind at ease.
After the flash, you get 27mb of "Storage" instead of the previous 7mb. I've got a 1gig card so it doesn't make much difference to me, but it's useful, and worth doing at the start so you don't have to re-install everything if you do bite the bullet later and apply the hacked ROM.
The hacked ROM will be a copy of your own ROM, so nothing will change ROMwise, however, I foolishly overlooked the fact that that space comes from somewhere, in this case it wipes out the intellidialer and some other gubbins. I had no backup of these, but forunately it's all stored away on the XDA developers FTP. Someone more informed than I can correct me, but I think the only files you really need to reinstall are the intellidialer. Also squirrel out the cab that contains settings for your network, orange, O2 etc (i haven't found these, they're on XDA developers somewhere bu i forgot where! Drop me a line if you find them...)
Once you've done that - well, your phone is pretty much as it originally was, but with a bit more storage for free. not a bad thing.
I would flash the ROM and then reinstall rather than doing a Sprite Backup/Restore, since the registry will be in a very different state after the ROM flash. However, i don't think it'll do any harm.
Sprite Backup is certainly worth getting hold of, and keep a copy of your backup on an SD card and your PC in case your phone gets 'half inched'.
Hope that helps.
Vijay

questions and answer
Try this site for uk gprs network settings
http://www.buymobilephones.net/smartphone_setup.ihtml
Hope this is hat you were after???
also......pls could you tell me .....
what rom version did you use for your upgrade?
how does the phone benefit from upgrading, in terms of "real world" use?
can you upgrade the storage to the stated 20+mb without upgrading the rom version?
can you use any rom from any country from any model and network or do you have to find an exact match eg UK T mob MDA compact?
sorry for the million questions...i have been reading this site for days and have ended up dazed and confused....

riz- there's a tool that will modify any normal rom to the extended rom version.
Extended Rom provides you with a pseudo "Storage Card" called "Storage". if you check the control panel > system > memory > storage you should have about 7mb. Using the extended rom hack, you will hack 27mb, at pretty much no cost to you; this is very useful for storing backups, installation files, photos etc, or anything that you never want to lose, since this space is usable by you, but won't be lost if the phone runs out of battery at any time (unlike the phone's normal memory, that will be wiped if there's a prolonged loss of power). Although using a big SD card is an even better way to do this, it's useful to get teh 27mb for free if it's available i think.
To get the 27mb, find the tool in the upgrading magician forum to hack any rom to bigrom http://forum.xda-developers.com/viewtopic.php?t=22582&highlight=anansky+rom.
Then, use the backup procedure described on that page to copy your own ROM from your phone to your pc. (you'll need an SD card and a card reader to do this). make a backup of that file
Then, use the prog to hack your own rom, then flash it back to your phone. Then your phone will have exactly the same rom as it had before, but better. You will lose some of the guff that was there before, but as i said perviously, this can all be downloaded from XDA forums.
So, I heartily recommended this just for the convenience of being able to store backups etc securely etc..
V

thanks for the very indepth instructions... still a bit scared to try it ...only got the phone yesterday....prob wait another hour or so...he he he
thanks again......
hope that link was useful??
any experience on using dual sim...the type you cut up???

I have finally done the 1.11 upgrade and all working fine thanks for your help. I have also noticed theat 1.12 is out now !!! going to wait for some feeback before trying it.

solarsystems said:
I have finally done the 1.11 upgrade and all working fine thanks for your help. I have also noticed theat 1.12 is out now !!! going to wait for some feeback before trying it.
Click to expand...
Click to collapse
Are there any notable differences between your old rom version and the 1.11.?? I hear the 1.12 has been received with mixed reception…
thanks

Thanks for the cab settings!
Yeah, I guess you might as well patch directly to 1.12, although it's annoying that there's no update history etc to show what's been "improved"!.
I've just bitten the bullet and ordered the ebuyer SD wireless card (£26 delivered, 50% cheaper than ebay!). Hope it's ok, quite worried about it. But, when i did the Big Rom I had this in mind - although my main card is 1gig, obviously I'll have to pop it out to use the sd. so, I can keep essential apps in the 27mb, rather than feeling cramped in 7mb. Makes sense, no?
V

MDA on O2
Hi there,
I have just bought an unlocked MDA compact but can't get it to work on O2!
Can anyone help me?
Cheers,
Evan

I have an unlocked MDA connected to Tesco Mobile (actually uses the O2 network) and it works fine.
What exactly is the problem ?
Stu

Stu,
Thanks for your reply.
The MDA that I have seems to be unlocked as I have it on Orange at the moment, but, when I put my O2 sim card in it just says that there is no service!
Evan

The only thing that springs to mind is that Orange is on a different frequency to O2 so maybe you need to check the network preferences to make sure that it is set to automatic.
Stu

Help: My German O2 Mini dead

Dear all expert,
While trying to flash my German Black O2 mini from Ger to ENG. (Using MAupgrade_noID)
After some steps, the o2 mini turn black and display
"Serial V1.02"
At this time, even though I softreset or hardreset the device,
the same wording also appear and can't further boot.
I even use SD card method but the same wording still appear again.
Can any expert teach me how to rescure my device?
Thanks

Are you sure you did the SD-method right?
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available. Now do the following:
Get ntrw from this site
Get a 512 MB SD-card (maybe a 128 MB one will work, too, but I am unsure about this).
Put ntrw into C:\
Extract the RAR into C:\, which should produce C:\11301bs.nb1
Enter the following into the command line at C:\:
Code:
ntrw write 11301bs.nb1 [your SD-card drive letter, e.g. I:]
, ignore error messages
Fully load your Magician!
Disconnect your Magician from anything, especially USB
Shutdown your Magician (press power button)
Put the SD-card into the Magician
Put Magician into Bootloader-Mode (Camera+Power+Reset at once, until you have the "Serial 1.02" screen w/o backlight)
Wait some seconds for "Press power to flash" to show on screen. Do just that.
This might just work.

Thanks KK.
What's wrong is that, it seem the bootloader is dead.
WHile I input the SD card while enter into the bootloader.
The screen still display "serial V1.02" and hold it.
No further wording like "Press power to flash it" etc.
Is it the bootloader is dead?

I do not think so. Make sure you shut down the Magician before placing the SD-card with a fresh ROM-image written to it into your device. Power on into Bootloader-Mode afterwards.
Another option to check your loader is the following:
Shutdown the Magician
Go into Bootloader-Mode
Wait for "Serial 1.02" to be displayed
Connect to PC via USB. The Bootloader should display "USB" shortly after connecting. If it does not: Maybe really you managed to kill your loader.
What exactly did you do? I used the NOID-Tool too, and had absolutely no problems with it. Besides: I also have a bootloader version 1.02.

kk
While plugging the usb cable to the device , yes, it show "USB" on the screen then.
However, when I use the romupdate.exe and try extract the rom into SD card at this time. After pressing "d2s" , the device shut down at once. No words appear on the screen.
Do you know what does it mean?
Besides, can you tell me what is "NOID-Tool" ?
thanks

The NOID-Tool would be MAupgrade_noID, which you used.
I am not sure about it, but as your device does not boot into the OS anymore, it seems reasonable to assume, that the ROM in your device is not valid anymore, due to errors while flashing it in the first place.
So - if there is no valid ROM, there is nothing, which the bootloader can write onto the SD-card.
Please try the method suggested in previous postings before anything else. If all this fails, I have no further suggestions - your device might really be dead.

You can try regular upgrade insted of doing it through SD card.
Danload shipROM, extract it and use MAupgradeNOID to run ROM and that is all you should do.

kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M

kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M

Hi there!
The FTP-master kindly converted the file to ZIP format. It is now available here: ftp://xda:[email protected]/Magician/BigStorage_ROMs/DE_T-Mobile_1.13.01.zip.
Remember: I used a 512 MB SD-card to create it, so maybe it won't work with smaller ones (but I think it should, since the ROM stored within this SD-card-image is no more than 64 MB in size).

Hi KK,
I found it along with the other BS roms and feel ashamed I couldn't find them. I tried it first with my 512MB card, but the cardreader won't write the file (no question about formatting whatsoever). Tomorrow I'm going to try with my 256MB mini SD card, which I know will be written by NTRW. I'll let you if I succeeded.
Regards, M

It works for sure with my 512 MB Kingston SD-card!
Don't bother about an error at the end of the ntrw-writing process. That's absolutely normal, since it would like to make the SD-card-drive the current drive, which is not possible after the writing process, as the SD-card now contains a ROM-image instead of a valid filesystem.

Hi KK,
Didn't manage to get it flashing. I used both cards but my magician doesn't accept the image somehow. No sign of any message like 'press power to load', not on serial nor on usb connection in the bootloader. It did work before with my own dumped rom, but lost the storage than, but it did accept the rom. Now it keeps awful quiet, I copied the first bytes and all, so maybe I'll give it a try with another rom. I want to sort this problem out.
Cheers, M

nbfdec made my big storage
Hello KK,
Yesterday I tried with the steps from hlt, out of the radio 1.13 upgrade thread http://forum.xda-developers.com/viewtopic.php?t=32274. It doesn't involve any rom dumping or sd-card action whatsoever and it worked first time.Just one tool: nbfdec and a shipped rom. It is fast and simple. Thanks for your advices, hope others will try this method as well, because it is much easier than bigstorager and bytecopy etc.
M

The "no SD-card required"-method in this thread only works for shipped ROMs. The ROM i prepared is a combination of the latest german OS & Radio versions plus BigStorage, which is to my knowledge _not_ available in this combination elsewhere, and should therefore be the most up-to-date ROM usable for any german magician user with very few simple steps.
Since you require a non-german version, my ROM will not be appropriate for you, but this thread started out with a cry for help with a non-booting magician, and I thought, that my ROM-modification would be of some help here due to the simplicity in applying it and its actuality.
But be it as it may.

KK,
I had the same problem as Netmon, only bootloader and I couldn't make the sd flash. That's why I was looking for a decent rom. With the tooling found on this site I probably could turn my magacian from German to English again. Since all my storage was gone I could take the risc.
I solved my problem with the upgrade 1.13 thread and that method would have worked for Netmon to I guess, just put the magacian in bootloader connect to usb and flash with a German shipped rom or an altered version.
Anyway thanks for your time, M

Dear rilazi and all
The device has been proofed for dead by the manufacturer.
The symptom is
1) romupdate.exe can't detect the device
2) press softreset button can't reboot the device to normal screen, only display "Serial V1.02" on the screen
3) Use SD card method doesn't got any respone from the device, keep displaying "Serial V1.02"
4) Use shipped rom (with MaupgradeNo_id.exe) also can't detect the device.
I don't know whether it the V1.02 version of bootloader problem or not.
Before, I try to flash many time which it V1.01 with no problem.
So, all of the V1.02 German device (Black color Mini) should pay attention to it.

I have a bootloader v1.02, too. Absolutely no problems with flashing on my side.

How do i convert Stock T-Mobile to O2 Equivalent

I have searched read and looked all over the board.
The problem very specific.
I have a stock MDA Compact with the T-Mobile Software installed.
I want to convert the phone to its O2 equivalent with all the bells and whistles.
Whats the best way to go about this?
Is there a UK O2 rom i can simply upgrade the unit with?
What extended Rom software do i install?
Thanks.

Backup your important data, hard reset your phone, and let the phone have its OS reinstalled. As you just finished the security (pin) setup page, soft reset your device (e.g. when it pop up a window saying that it will install etc etc software).
Get the O2 ROM from the xda-dev ftp, and install everything in the Exetended ROM, and you should have your O2 eqv.

hanmin said:
Get the O2 ROM from the xda-dev ftp, and install everything in the Exetended ROM, and you should have your O2 eqv.
Click to expand...
Click to collapse
I got the files from the ftp yes. Unfortunately the Extended rom is read only, how do i edit the attributes?
i can also install from an SD card, but i want to have these files permanently in the ext rom.
thanks again Hanmin

You should execute the O2 cabs from your sd-card. Or permanently flash you rom with the O2 rom to get them in your ext-rom. The ext-rom is read only & can only be written by flashing your rom or turning it into BIG Storage. To flash your rom to O2 you need MAUgradeUT_noid & the description from http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
Regards, M

Doh, of course how could i forget, the very definition of ROM, read only.
Well i executed the Autorun from the SD Card, but its installed all the T-Mobile stuff again, (which still resides on the ROM).
I would execute the cabs individually from the sd but im not sure which are meant to be installed for my network.
After a few errors running the upgrade previously your instructions have now worked.
albeit i had to put the phone in bootloader mode after step 5 and before step 6
oltp said:
http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
Click to expand...
Click to collapse
I want to replace the tmobile rom with an O2 set of files (an O2 ROM?).
How do i go about this? ( ie Keep the ext_rom )
I gather its the same as flashing a big storage ROM to the phone excepts the nbf will have the O2 files i want instead?
Thank you all for your time

is there a way to revert from a new rom back to the factory rom... if i didnt back it up to begin with. i have a xda mini s and i upgraded and now i want the old rom back.. is it possible? and how?

KwaZyLiLoBoY said:
is there a way to revert from a new rom back to the factory rom... if i didnt back it up to begin with. i have a xda mini s and i upgraded and now i want the old rom back.. is it possible? and how?
Click to expand...
Click to collapse
It's only possible if you find a dumped rom or a shipped-rom which is the version as the one you had before. Maybe your provider has a shipped-rom on its web-site? Or take a look at the ftp and maybe you're lucky to find one. If you find a shipped-rom it's easy, connect via usb & start the exe file. If you've got a dumped rom you need to change the header of the downloaded with your own device's header, write everything to sd & have the bootloader update the rom.
frantyk said:
Well i executed the Autorun from the SD Card, but its installed all the T-Mobile stuff again, (which still resides on the ROM).
Click to expand...
Click to collapse
The have the autorun starting files on sd, you need to edit it a little. It got hard-coded path & filenames and some instructions to prevent userinput (thus locking the keys & keyboard).
frantyk said:
I would execute the cabs individually from the sd but im not sure which are meant to be installed for my network.
Click to expand...
Click to collapse
Now you got me puzzled. Do you want the O2 CE-rom or just the ext-rom & keep the TMO network settings? Cause the CE-rom isn't much different for all providers, it's the ext-rom that does the customizing & changes the network settings.
So if you want an O2 ext-rom with TMO network settings I suggest you first write down your TMO settings for gprs, voicemail, mms & sms & then flash it to O2. You might even try to update the ext-rom only. It's possible to update to radio by supplying the radio.nbf only to the romupdateso I think it's possible to update the ext-rom by itself too. Can't remember the nbf name, but nk.nbf is your CE-rom & that makes only one left, isn't it.
You can use WinCECabmanager (10 trial executions) to see what's in all those cab-files.
Good luck to all of you, M

I think frantyk meant that he wants to keep the original t-mobile (mda compact) ROM while installing the customization (ext rom), such that the 'OS' is relatively the same while having O2 stuff in it.
Anyway, I think if you downloaded the correct O2 ext rom, you can install everything one-by-one manually, it shouldn't give any conflict. I'm not sure why, when you run Autorun, it install t-mobile stuff, probably the autorun is pointing to the ext rom.
You can unlock the the wizard ext rom unlocking cab, delete everything in your ext rom (MAKE A BACKUP FIRST), and copy the O2 stuff in. You should able to 'lock' the ext rom back in place. Then hard reset your device, you should have everything, including O2 stuff installed. I unlocked my ext rom before, but I can't remember if this is the one I used. --- IMPORTANT --- I've unlocked my ext rom with this cab before, but my device is a HTC Charmer, which is very compatible with Wizard. I'm NOT SURE IF IT WORKS ON MAGICIAN. You may want to look around the forum to find a ext unlocker for Magician, just to be safe.

The Magician ext-rom can't be unlocked, only flashed or turned into BIG Storage. Though I think you can flash the ext-rom only, the safest way it to flash the whole rom with an O2 shipped-rom. This will be the only way to get the correct ext-rom being executed after a hard-reset. Indeed the autorun contains a path & is unusable from sd without changes.
BTW not many people want the O2 stuff, I guess it's about network settings only. Which are on the web too, can't remember where :-(
M

What i want is the Standard CE software (ie no branding what so ever) which i think i have achieved with in flashing the phone with Shipped ROM WWE_11300_550_11200 - although it has the Qtek boot logo.
Im also using some of the Cabs from Extended Rom O2Mini_WWE_1.11.922
Why does this Ext_Rom not have and network auto config for O2 UK? Where can i get and Auto config cab for UK O2?
I want to use the phone mainly with an O2 Sim card, so i need al the O2 settings for GPRS and that, 2nd priority is having the T-Mobile GPRS settings cab for when i occasionally change chips but this is less essential that the O2 settings.
What does WWE stand for? My guess was XXEuropean?
Thanks

OK, unbranded CE is either the mentioned QTEK or any BIG Storage rom. Don't worry about the splash that can changed very easily.
WWE means World Wide English.
The network settings can be found here http://www.cctvsafe.com/support/phone_settings.htm
Cheers, M

hey.. what ports do you use for proxy, if you do use one..

WM6 Which file

Hi I am new to all this.
I have an XDA EXEC, copied the T-mobile rom all works fine...except thebusual crap GPRS/3G reception.
I was looking at installing WM6 today....
Which file is the best/most stable at the moment there are many threads with many updates etc..
What do I gain by upgrading to WM6..
I am sure I am not the only one to ask this question

I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.

badman112 said:
I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.
Click to expand...
Click to collapse
Hi there
If the instructions are followed as written, it would be quite hard to brick your device.
As a start you could try Jwright's WM6 rom version 2.02.02, works great for me & I don't have any wifi bug (I use wifi a lot).
I say it's a good starting point as it is an executable upgrade (make sure to d/l the correct one for your device) just like the OFFICIAL roms, only it installs WM6 instead of WM5.
Download that one and give it a go.
That rom is very simple to install as it is a single executable file, with the whole package contained within.
All I did was
D/L the ROM for my device (jwrights 2.02.02, locate it in the forum).
Unrar it somewhere to my pc.
Put device into bootloader mode (power,backlight & reset) a screen with no backlight appears with the words serial vx.xx (x.xx being your version of the bootloader) you may need a torch to see it.
Connect device via usb.
Execute upgrade (file that you unrared to pc)
Once finished (about 20mins or so), unplug device & perform a hard reset (both softkeys & reset until the white option screen appears) and select "Restore" from the options. I believe it's 0 (zero).
This also upgrades your radio rom to the latest V1.15.
Happy bricking!
OOPS I mean upgrading.

Storage memory corrupted with WM 6.5

Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks

Boudin said:
Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks
Click to expand...
Click to collapse
it can be a many number of things...but you can start by check the card first...every time you go from one rom to another check it and save things (important ones)
now you can only try to get things back with getdataback (always worked with me)...
cheers

Thanks for the answer. It's not my storage card that lose data but phones internal storage memory.
It happened again just now, while installing a cab file.
I've got the impression that it's linked to cab installer since the other times I have installed a CAB to (tomtom) but it could be the fact that cab installer is writing data on defective memory.
Is there a way to test the internal storage memory in order to check if the problem is hardware ?

Finally it happened again, without cab install, without any manipulation after the hard reset.
I switched back to M-Amine 2.0 (WM 6.1) and it seems to have resolved the problem.
It's like the file system driver used in windows mobile 6.5 don't works well with my phone, wich can explain the file renaming, file disappearance, directory loss etc...
I would like to have a solution to switch back to WM 6.5 and a more recent version of HTC applications, so if anybody have any idea where can it come from...

Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
There seem to be HR and MC losing data issues with some roms, so i recommend flashing a htc original rom and only then this one, before proceeding as always make a backup of all data before attempting to use this rom...
Click to expand...
Click to collapse
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom

Boudin said:
Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom
Click to expand...
Click to collapse
i've been trying with android while waiting for pcarvalho next release. i am using task29 and radio.nbh to clean up the rom. what i noticed is that ( and i believe) task29 does not really clean the ROM, because after flashing many times android ( and i always use Task29, then flash android rom) the problem that i have ( lock SD card and its r/o status) did not disappear. i've been switching from rom to rom to rom (different build) , trying to elimante the problem. at last i flash back pcarvalho's rom back, than task29, than back to android. the problem solve. i donno may be because task29 only perform quick format instead of full format. the problem stays. i think ( maybe i am wrong) the bigger the size of the rom file is better as it rewrite the whole rom instead of small section of rom.
i guess...

It's surely something like this, i've just flashed with an official rom and flashed with pcarvalho's one and this time it works like a charm. (by the way, thanks to all cookers for their works).
So the problem is resolved, I had misunderstood the problem of data loss as it does not affect only the storage card data but also phone's internal storage memory.
Thanks to all.