i cant get anyone to send me files/ringtones on the fuze over bluetooth. Is there a setting im missing or is there a fix for this?
thanks
boo
Make sure you go into the settings for Beam and see if Accept all incoming beams is checked off.
thats the trick! i cnt believe i mist that thanks man
Related
Hey Guys,
I have an issue with my Fuze and am hoping there is a simple setting that may help me out.
I have an Xlink Bluetooth gateway in my home, and have a Jag XK with bluetooth. Previously I had an 8525 where the bluetooth worked well.
I got the Fuze and I thought all was well. But for the last week, when I get an incoming call the blue tooth rings (houseline on XLink or XK Radio), but when I connect the call I get dead silence.
I can make outgoing calls via bluetooth and both devices work fine.
On the Fuze, if when ringing i hit answer on the phone, rather than the car stereo occassionally it connects.
Since I have the same issues (silent connection) when connecting via Xlink or XK I figured it must be an issue with the phone.
Any thoughts or ideas ?
Thanks
Dave
The issue is with Voice Command not with phone. If you update Voice Command to 1.6.19209 it will fix your issue. The other option is to turn off Announce incoming Calls option.
Update Voice Command
The phone has version 1.6.19971 --- So that would be a downgrade not an upgrade....
Does that still make sense ?
Dave
You've tested that specific version and it works? NATF said he tried his version from his Tilt and it didn't work. Please confirm!
Nice work!
You guys are really on it! I started noticing this problem today after enabling 'announce incoming calls' yesterday... didn't even occur to me. So I disabled it as per your suggestion, and it's working fine. Thanks very much for that. If I wanted to roll back to that earlier version, where could I find it? I still have my Tilt which I upgraded to 6.1 (battery's probably dead)... could I get the .cab off of it? Do we know for certain the earlier version works? Thanks again.
We were on it for a long time. You'll see multiple posts about that.
I try Sending/Recieving MMS
but it cant
it ALWAYS FAILS
im using a 8125
I'll tell you what i tell most people. MMS's are problematic. not all networks support them coming from WM devices. I can't tell you if it's a solvable problem or not... but the most common one is the network/device...
A little more information please. Did you have problem with MMS ever since you got the phone or did it use to work then suddenly stopped working?
The simplest answer to that actually is that you're phone is not configured to you're home networks MMS settings. You can call your network provider and ask them how to configure your phone to receive/send MMS.
mmm I agree with Nir im afraid, MMS promised so much and delivered so little. Great if your sending one to someone on the same network in the same area, but crap if your sending to someone on different network or when they're roaming. MMS? pfftt.....
I know that doesnt help you, but just dont bother, email a photo from your device, thats what i do and at least you knwo they'll get it yh?
Of course, if you investigate this further with your network and get a good feedback or have a good solution, i'd be happy to hear it.
nir36 said:
Of course, if you investigate this further with your network and get a good feedback or have a good solution, i'd be happy to hear it.
Click to expand...
Click to collapse
i think we all would Nir, but my networks have proved difficult in my experience..... why cant they all decide to use common software/hardware so MMS works across networks.... man that pisses me off
hello, on my touch pro i am no more able to receive any object sent via bluetooth by another mobile phone or a pc.
acrivesync is working, and also is working pairing with other devices...
please help!!
thanks in advance
Have you checked that the reception is activated in Configuration/Conections/Transfer ?
also check to make sure the recieve all incoming items is checked in the settings/beam i had the same problem when flashing new roms...
Beams were deactivated in comm manager. I activated them back and now i can receive objects.
THANKS A LOT!
(you saved me from an hard reset )
Just to clarify, the BEAM setting on the Touch Pro deals with bluetooth beams?
I unchecked mine because I thought it was a holdover from devices with IR.
I guess I should set it back?
I hear that someone used an old .cab file from their Fuze and got Internet Connection Sharing working on their Verizon TP2 ? Can anyone confirm / share the .cab?
Also, I know "conferencing" is disabled on the Verizon TP2 but I have heard you can still do a 3-way-call? I have not been able to figure this out - can anyone fill me in?
Thanks
oh my god!
ade333 said:
I hear that someone used an old .cab file from their Fuze and got Internet Connection Sharing working on their Verizon TP2 ? Can anyone confirm / share the .cab?
Also, I know "conferencing" is disabled on the Verizon TP2 but I have heard you can still do a 3-way-call? I have not been able to figure this out - can anyone fill me in?
Thanks
Click to expand...
Click to collapse
I cannot do a conference call... I called tech support and they told me to just dial second number and press send. then send again to connect all 3 call. Nada... Nope. does not work.
We need some xda cooks to restore the htc conference call software! asap!
arche3 said:
I cannot do a conference call... I called tech support and they told me to just dial second number and press send. then send again to connect all 3 call. Nada... Nope. does not work.
We need some xda cooks to restore the htc conference call software! asap!
Click to expand...
Click to collapse
Info on 3-ways calls straight from the HTC manual located here: http://member.america.htc.com/downl...ro2_Verizon/HTCTouchPro2UsersManualforVzW.pdf
This if for CDMA mode, GSM mode is also in the manual.
Making Three-way Calls in CDMA Mode
To set up a three-way call, directly dial the participants and add each connected call to the three-way call.
Starting a three-way call
Press the TALK/SEND button to open the Phone screen.
Make the call to the first participant. See “Making a call from the Phone screen” for instructions.
When the first call is connected, make a call to the second participant. The first call is put on hold when
you dial the second call.
When the second call is connected, tap Flash to start the three-way call. The screen displays Call in
progress.
Tap Flash
When a three-way call is in progress, you can open the keyboard view the call in landscape view. You can also
tap Flash to cycle between the three-way call, Caller 1 only, and Caller 2 only.
ICS
ade333 said:
I hear that someone used an old .cab file from their Fuze and got Internet Connection Sharing working on their Verizon TP2 ? Can anyone confirm / share the .cab?
Also, I know "conferencing" is disabled on the Verizon TP2 but I have heard you can still do a 3-way-call? I have not been able to figure this out - can anyone fill me in?
Thanks
Click to expand...
Click to collapse
No need for a Fuze cab for ICS or anything like that. Just download the attached XDA WiFi sharing cab and you can turn your phone into a wireless router and connect from any wireless PC/laptop that supports ad-hoc wireless networks (basically all of them).
See the other post above for directions on the 3-way call.
Nate
can someone with a verizon tp2 try 3 way call?
i tried method using flash button. i tried method of using send button. it does not work for me in nyc area. if anyone can try this to confirm it does work it would be much appreciated.
while on a call i pull up keypad. dial number and press send. i get a notice that new call is on hold. (which is opposite what is implied in the manual) i press flash button and new call disappears. only on original call again... what am i doing wrong?
I tried this once right when I got mine and got similar results as you.
I'll have to try this again, I'm rarely making 3 way calls from my cell.
ade333 said:
I hear that someone used an old .cab file from their Fuze and got Internet Connection Sharing working on their Verizon TP2 ? Can anyone confirm / share the .cab?
Also, I know "conferencing" is disabled on the Verizon TP2 but I have heard you can still do a 3-way-call? I have not been able to figure this out - can anyone fill me in?
Thanks
Click to expand...
Click to collapse
Hey, I answered this exact question on another thread as far as tethering. I have VZW and these instructions I posted worked perfect. Check here for all the instructions you need to tether using your unlimited data plan.
well.... supposedly it works now. I called tech support. she grabbed 2 cell phones. she called me and we connected. then I dialed the number of her 2nd cell phone. I hit the send button and after she picked up and I heard her voice on the line I hit the send button again. and she said both calls were still connected. hmm... So I guess it does work. although on the phone screen it just says connected. No indication connected to what??
So does that mean nothing was ever disabled on the phone... just that the network didn't support it?
I have t mobile and with the wifi on i dont recieve text or i recieve them really late, but when i turn off the wifi all the text comes trough and everything works as it should. Does anyone else have this problem and how can i fix this
No such issue with WiFi always turn on
Zasnizas said:
No such issue with WiFi always turn on
Click to expand...
Click to collapse
hmm maybe im crazy ?
Same issue here, also with SIM connection...