He Guys my phone's wracked.
Im searching a rom (German prefered) for flahing it to default or a method how to restore default rom on the phone.
Would be great if anybody vcan help me.
solution
I got the info from toshiba how to hard reset the device.
Load akku.
Remove akku for some time.
Insert the akku again
hold left and right softkeys
Power on & push + button at the same time.
Thats all.
All data is lost in this procedure so do a backup if you can
??
can you explain that again?? what the heck is "akku"?? sorry but i'm a newbie aroud here...
I looked into the net and now i know... akku = accumulator = battery
I've done what you said and surprise.... nothing happened... have to do a software upgrade. Have to spend €30...
press LEFT SOFTKEY + END CALL button then turn on your device, should work
Related
Hello
The camera of mine Qtek 2020 doesn't word. I don't a icon for the camera. I has gove the qtek a hard and a soft reset is do not helps. I set the new romversie on the qtek and this also don't work. Who can help me.
Thanks
Harry
Cammera Button is break
Dear All.. same prob here:
How to perform HardReset since my Camera Button is break?
Using TheGreat WM6 AKU7 from CS
May be you have to open your PDA and check what is happened with the button. Seach the manual how to open your PDA completely somewhere in here
Actually it's the caused:
I was repaired the speaker, for it is been dead; unfortunately I break the button by accident
Doesn’t have time yet for “soldering solution”, are there any other options to perform hard-reset?
makasih lhoo
I think you got the answer from another thread in WM6. You can try PSShutXP software
Nope,
been doing it ..but it doesn't show these "HardReset Menu":
-KITL
-Clear
-Format
How if you let the battery drained open the battery and wait for at least 30 minutes. normaly it is used for wm2003 but I do not know whether it work on WM5 or above
no it dont because hardreset for wm5 and wm6 require a clearing of the flash storage which never loose it after when it loose power
Hello I have a very strange problem with my Prophet...
when I turn it on or do a soft-reset i must touch the display and move with the stylus on the Display all the boot-time when i don´t do this my Prophet freeze at the Splash screen is that Normal ?
I have a xda Neo G4 with the Last Dopod Rom please help me anyone... sorry for my bad english and THANK YOU!!!
Did you make a HR?
Remember, you'll erase all your data. Remove the SD card and Press and hold the camara and common manager buttons at the same time, then put the stylus into the hold close to the USB connection. Still hold the mentioned button, when a dark screen become, it going to said to restore, push the green button you used to answer a call.
Your device become as factory.
cidriver said:
Did you make a HR?
Remember, you'll erase all your data. Remove the SD card and Press and hold the camara and common manager buttons at the same time, then put the stylus into the hold close to the USB connection. Still hold the mentioned button, when a dark screen become, it going to said to restore, push the green button you used to answer a call.
Your device become as factory.
Click to expand...
Click to collapse
i know how goes a hardreset Thank you no i will only know why this happens ?
I have the same problem. I only soft reset while on external power otherwise the system either hangs or I have to tap the screen often to keep it alive. I found no solution.
HELP!!!
Having the same problem here.
After hard or soft reset my prophet freezes on the screen with the spl/ipl info. This happend after I tried to install the AKU3.3.13.ASERG-us rom.
Tried everithing I know (which is not much in this area)
HELP
Try flashing with another ROM. Wm5 or wm6. We are plenty of alternatives.
reSpect
Just resetup ur Rom and other programs.... and make sure when u install any programs need to restart ur device that make restart ... and follow the steps step by step
After to have launch the file VZW_TP_SSPL-Manual.exe mine TP more it has not been turn on !
It' dead !!!
how to default reset with buttons ?
HELP me !
Sorry for my english:???:
As written here:
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#Hardx20.Reset
Hard Reset the device:
This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset
Pull out the stylus.
With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
ferus write: ...With the device turned on, press and....
but my device doesn't turn on, like if it were without battery !
bye for now.
Since English is not your primary language, I'm going to assume you do not live in the US. That being said:
You loaded a file designed ONLY for the Verizon Wireless Touch Pro device. The Verizon Wireless Touch Pro is CDMA (no SIM card).
Manino65 said:
My TP is dead ! How to make to alive ?:
Click to expand...
Click to collapse
i am sure Jesus can resurrect it
i beleive you have a brick my friend
CDMA is WAY not GSM
Based on the apparent knowledge (or lack thereof) of the OP...
First, STOP... You don't know what you're doing.
Second, as you've only loaded the Soft SPL have you tried simply removing the battery yet?
If not then do that before you do anything else .
After you have removed the battery count slowly to 15 then replace the battery and see if it come on again.
Return here and report the results.
First, STOP... You don't know what you're doing.thank you
Second, as you've only loaded the Soft SPL have you tried simply removing the battery yet? yes,for 8 hours.
I have made a hard reset, VOLUME DOWN and CENTER buttons, then press the RESET button, without success.
Wow, I'm suprised that SoftSPL would do perm damage to a device as my understanding was that it didn't actually overwrite the SPL but redirected to load from a different memory location (where is was actually written to).
Anyway...
I would say this leaves you with one option, warranty replacement. Call your provider or the reseller where you purchased the device and tell them that you woke up one fine day and it was simply dead.
thanks to cotulla we could see wm 6.5 on magician both 46m and 128m memory..
But every time i upgrade to the latest rom .. I find that i have to downgrade again to rom 3.03 because it's the last rom to have the " no button lock" option.. But all the roms came after do not have this option ..and the only button to use to turn on/off the device "magician" is the power on/off button..
Which is made of rubber in most of devices.. And if it's not broken in your magician, it will be very soon..
But if it's already broken or has any problem .. You will not be able to use any of the roms after 3.03..
So you will have to downgrade to this rom to be able to use your magician...
I hope cutolla or any one can find a fix to this issue to allow buttons other than power button to work.. Thank you.
tarekezzat said:
thanks to cotulla we could see wm 6.5 on magician both 46m and 128m memory..
But every time i upgrade to the latest rom .. I find that i have to downgrade again to rom 3.03 because it's the last rom to have the " no button lock" option.. But all the roms came after do not have this option ..and the only button to use to turn on/off the device "magician" is the power on/off button..
Which is made of rubber in most of devices.. And if it's not broken in your magician, it will be very soon..
But if it's already broken or has any problem .. You will not be able to use any of the roms after 3.03..
So you will have to downgrade to this rom to be able to use your magician...
I hope cutolla or any one can find a fix to this issue to allow buttons other than power button to work.. Thank you.
Click to expand...
Click to collapse
select >> Start & Lock ..
look like Nokia Mobile phone.
it's not that easy man.. iam not talking about how to lock my phone .. i know it's start>>lock.. i'm talking about how to turn on the phone.. after the regular sleep mode of non-use for couple of minutes...?????
yes
i realized this problem too.Cotulla,can you tell me how i can waken my phone with touching my screen. i was told this might work, but it never worked. i have to press my power button again and again when i want to waken my phone or even when i make a phone call. what a pity
Hello everyone !
The phone I ordered just got here.
its the same thing as sharper image 202tsi.
Buy dot com has the same phone. you can see it there. (im not allowed to post direct links)
The SW version
GSM6711A-R10-080305-NEPTUNE
Hardware version
GSM6711A_1.4
Device Information
System - smartphone
Producer - AMOI Eletronics
System Version 5.02
The box says its got GPS. But Im not able to figure out how to use it
Is there an update for this phone?
Any thing about this phone will be really helpful to me
Thanks
I have not been able to figure it out either.. checked purehitech website too.. they have nothing on the site...
there is no info on this phone anywhere!!!!
i was trying to reset the phone because it had user code and find that presing:
power + camera the screen went to download
power + left and right soft keys and back button makes clear storage
power + home, left and right soft keys goes to usb calibration.
i didnt find gsp on the phone.
hope this is useful because i didnt find anithing either.
Thx for the post Lennyomar
Your post helped me Hard Reset my Sharper Image PUERHITECH 202TSI phone that I bought from ebay locked with a password and couldn't figure out for the world how to hard reset the darn thing.
Step one
1. Power + left + right + back(next to the right soft key) buttons while system is still powered on.
Keep trying till you see the screen change to blue with the words "Clear Storage"
2. I had to press the letter "Y" (I think it helped?) and the "ENTER" button at the right corner of the keypad.
The screen turns black for a few seconds comes on with the sharper image logo and stays there re-imaging the phone. After about 2 minutes of waiting, voila! WinMo oh my GOD 6. Pretty ancient but it worked.
Now if someone can help me uograde to WINMO 6.5 would be great.
I realize this is an old thread, but just in case anyone is following it: I downloaded and installed EnableGPS (google it) which was made for an HTC phone, but it worked to enabel the internal GPS on this phone. I now have an active internal GPS that works with NoviGPS and will hopefully work with others. Now if I can only determine if there is WiFi (there are references in the registry) and get it enabled, then I will be so-o-o happy!
Amoi 6711 or Alcatel 202TSI or VDA-GPS or....
This device is similiar to toshiba g710 and vda-gps so there is no hidden wifi sorry... there is no possibilitiy to have wifi... but tell me about this gps trick you did? where did you found it?
The file is attached. Use at your own risk, but it worked for me, GPS is now accessable. Try also downloading and installing GpsTest from Chartcross. It will show you your working GPS. Enjoy!
It does not work for me it shows gps in garmin xt bud doesnt find any satellite