Need Help Badly - Touch Pro, Fuze General

i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can someone help me please?? i believe someone having the same problem in pairing their bluetooth headset. so someone who already solve this problem please help me....
i've been searching some help for this matter but i have not got any answer yet....
thank you

For the bluetooth headset try pairing without a password, just press done, it should pair.
I'm not sure about the hotfix but maybe is a pc file? Try running it on your pc.

palmbluetooth said:
For the bluetooth headset try pairing without a password, just press done, it should pair.
I'm not sure about the hotfix but maybe is a pc file? Try running it on your pc.
Click to expand...
Click to collapse
but if i don't type the passcode, it won't let me press next button.. is there any other suggestion?? or is there any .cab file that i need to install first??? since this bluetooth is working perfectly with my other phone.

There is no cab file to install -- this works out of the box. Have you tried pairing with any other device? Are you using the hardware keyboard or the SIP to enter the code? If the keyboard, are you sure you engaged numlock?

i think i remember that somebody said u should try 0000

i tried 0000 (which is the pin that i got from my bluetooth device) already.. when i entered the passcode, i already tried both method, using the SIP ,and the keyboard... but still it's not working... and give me the same error...

emesbe said:
There is no cab file to install -- this works out of the box. Have you tried pairing with any other device? Are you using the hardware keyboard or the SIP to enter the code? If the keyboard, are you sure you engaged numlock?
Click to expand...
Click to collapse
yes i tried to paired my buetooth device with other device (my other phone Nokia N73) and it's working perfectly fine....

excelex said:
yes i tried to paired my buetooth device with other device (my other phone Nokia N73) and it's working perfectly fine....
Click to expand...
Click to collapse
Not my question. Have you tried pairing your phone with another bluetooth device?

emesbe said:
Not my question. Have you tried pairing your phone with another bluetooth device?
Click to expand...
Click to collapse
umm i tried to pair my HTC with my N73, it paired perfectly fine... umm but i have not try to pair my HTC with any other bluetooth device... might be later i will try to pair it with mu bluetoohn dongle...
thank you

Related

Application Installation Problem

Hi,
I recently bought a Spectec SDW-822 mini SD WLAN-11b, and when trying to install the driver/software to my Treo 750 thru the Active Sync I pressed YES to install the software on my Treo, but the progress bar of the installation got "stuck" on the last bar and the installation never finishes, I waited for about 45 min, then I wanted to cancel the operation but nothing happened. So I try removing the battery and the putting it back on, but after turning on the treo, the same installation of the CAB file starts and gets "stuck" or stops at the last bar of the progress bar.
I need help please. What can I do to cancel the installation operation? I don't want to do a Complete Reset, I have a lot of data inside, and ActiveSync is not working, I believe because of the same issue.
I appreciate all the help you can give me.
THANKS
Same problem
I got the same problem.
Have you got answers?
guapoapelota said:
I got the same problem.
Have you got answers?
Click to expand...
Click to collapse
Yes, you will need to perform the Hard Reset and then everything will go back to normal, and if you want to install later the Spectec card, don't use the driver supplied in the CD, download the driver from the site: spectec.com.tw/Download.htm and get the driver named for "SDW-820/822 driver for Smart Phone" that worked for me and now it's working perfectly.
Hope it works for you.
davidgs said:
Yes, you will need to perform the Hard Reset and then everything will go back to normal, and if you want to install later the Spectec card, don't use the driver supplied in the CD, download the driver from the site: spectec.com.tw/Download.htm and get the driver named for "SDW-820/822 driver for Smart Phone" that worked for me and now it's working perfectly.
Hope it works for you.
Click to expand...
Click to collapse
May I ask yo if you have installed only the drive?
No other software?
Thanks for your patience...
guapoapelota said:
May I ask yo if you have installed only the drive?
No other software?
Thanks for your patience...
Click to expand...
Click to collapse
Yes, only the drive will work.
Works!!!!!!
Thanks!!!
davidgs said:
Yes, you will need to perform the Hard Reset and then everything will go back to normal, and if you want to install later the Spectec card, don't use the driver supplied in the CD, download the driver from the site: spectec.com.tw/Download.htm and get the driver named for "SDW-820/822 driver for Smart Phone" that worked for me and now it's working perfectly.
Hope it works for you.
Click to expand...
Click to collapse
Hi to the Forum!
Sorry, I don't understand: Have I to use this driver if my Treo 750 is in WM6?
I saw in Spectec download site there is the driver for WM6....
Regards
strillozzo said:
Hi to the Forum!
Sorry, I don't understand: Have I to use this driver if my Treo 750 is in WM6?
I saw in Spectec download site there is the driver for WM6....
Regards
Click to expand...
Click to collapse
My Treo had the 5.X windows version, so I dowloaded the other version.
Thanks
just use the wm5 driver
I have treo750 dat i just upgraded to wm6 (hahahaha upgrade and windows in da same line) and before downloading the wm6 driver i just tryed the wm5 driver dat came on a cd with my spectec card (the one without the tool) and it works fine, i had to do a hard reset but after i did card worked and poped up "unencripted network (dlink) connert?" love people who shair.

Unable to connect with activesync after misread instructions on flashing

Hello guys!
I've got a bit of a problem here, because now my mobile refuses to connect with activesync and therefore making it impossible to flash it.
I read the readme in the cid bypass folder, and didn't quite understand it, but as keen as I was on getting a new rom I did it all wrong.
I actually copied the cid bypass folder to my sd-card and ran haret.exe from the phone. A friendly penguin appeared along with some green text, and it rebooted and went black. I waited for a while, but had no patience so I rebooted it again. But after this it has been impossible to connect it with activesync! I've tried hard reset and different computers but nothing works!
I'm hoping someone on this forum can help me!
best regards
Try this.
turn your phone off and press the camera button in then plug it into the USB port
you should get a multi color screen. If you do then you can flash.
But go here http://forum.xda-developers.com/showthread.php?t=330909
Go to where it says EDIT and follow what it says.
Oh and when a dos box opens up and ask you things just press the return key each time.
good luck
hey man, I tried reflashing the original rom to my vox, with the manualstyle sd card flash. So now it's flashed with the original rom, but still activesync doesn't work! anybody have an idea on how to make this right?
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
zipuz said:
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
Click to expand...
Click to collapse
I am confused..is it working or not? one post you say it is but you cant sink..then you say its not.????
and dont use the flash off the mem stick..use windows..
ok, sorry for making confusing posts! I'm just excited about getting it to work.
So here's the situation:
From stock phone used with exchange (turned off the exchange part before doing anything)
1. I ran haret.exe from my phone, and it rebooted into a "black state" after which I rebooted it again
2. I tried to connect it to my computer using activesync, to be able to flash, but it wouldn't connect. Activesync doesn't respond to my phone.
3. I flashed the shipped rom to my phone from my sd-card in good hope that it would reset the whole process, but it still won't connect to activesync.
So here's my problem; I want to flash a cooked rom to my phone, but I'm unable to connect it to my computer via activesync, what to do?
deuse said:
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
Click to expand...
Click to collapse
tried with both ticked and unticked, still nothing
Turn off your phone then keep the camera button pressed in at the same time plug it into the usb port
your should show diff colors on the screen..if so follow what it says in this link.
http://forum.xda-developers.com/showthread.php?t=330909
and do it from the pc not your mobile...
it's restored, but no activesync still
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
ivanek666 said:
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
Click to expand...
Click to collapse
Have you been into settings and un-ticked the box in USB to PC?
Also if you are trying to sync to office you must create a new partnership
google is your best friend.
I have no problems with sync in XP/Vista?windows 7 and office 2007
I am using FMs 1.1 WM 1.1
deuse said:
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
Click to expand...
Click to collapse
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Try this
open sync then at the top chose files then click on DELETE MOBILE DEVICE
see what happens..but post back if you fix it to help other people
yogusmilu said:
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
Click to expand...
Click to collapse
I failed to mention that I've tried the hard reset as well, no luck.
I thought about the same thing Deuse, but there's no mobile device registered, so I'm not able to delete it.
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Looks like your cable is faulty. Try activesync connection through bluetooth (for testing, ofcourse you cant flash from bt ).
parthabhatta said:
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Click to expand...
Click to collapse
It's marked with an "!", will try it on my own pc next time I have it, worked there last time! if not, I'll have to live with

[Q] USB connection issues

I just installed the htc nand android rom and everything was a success but I have an issue, I forgot to change the radio version and I hear the android voice when I call but the other end hears me clear. I have the right radio app. on my laptop but when I try to connection my usb cable from laptop to cell its doesnt let me flash it, I tried my desktop and the same issue, I downloaded sync app for my cell and it worked when you DLoad media but it doesnt let me parralell sync so I can flash the correct radio. PLEASE HELP!!!! I hate what use to be windows crap htc. I love my android version. Thanks!!!! I'am stuck without a phone until I resolve this Horror!!!!!
Did you try flashing the correct radio via fastboot?

USB Problem on my Inspire 4g( Please help!!)

Hi, all
I got a new inspire 4g last week. It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not detect the phone as a device. I have tried all the suggestion on xda but no luck.
Please help me to solve this issue. I have seen a lot of thread discussing this issue on HTC Desire. They all suggest to format mtd0 in fastboot mode .But during fastboot mode also my phone is not detected by PC (tried both on linux and win7. Other phones are working on the same pc) , So I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
EDIT:
I have full access to recovery. Currenlty Clockwork mod 5.0.2 is installed . I can install custom rom without any problem.
musarraf172 said:
Hi, all
I got a new inspire 4g last week. It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not detect the phone as a device. I have tried all the suggestion on xda but no luck.
Please help me to solve this issue. I have seen a lot of thread discussing this issue on HTC Desire. They all suggest to format mtd0 in fastboot mode .But during fastboot mode also my phone is not detected by PC (tried both on linux and win7. Other phones are working on the same pc) , So I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
EDIT:
I have full access to recovery. Currenlty Clockwork mod 5.0.2 is installed . I can install custom rom without any problem.
Click to expand...
Click to collapse
Have you tried to remove and then reinstall the android driver?
zelendel said:
Have you tried to remove and then reinstall the android driver?
Click to expand...
Click to collapse
Thanks for your reply. But there is no issue with driver because my phone does not detect the usb connection as well as the pc also does not detect the phone as a device ( in device manager in windows or in demesg in linux).
Please help..
Edit:
Today I have tested with another Inspire 4g (My friend is having one inspire 4g) with my pc. It is detected by my pc ( both in linux and windows). Fastboot as well as adb worked like charm. But my inspire is not detected by the same PC..
I have the same problem with my Inspire and yet to find the answer. Have tried everything i could find on the internet except a factory reset. If i cant fix it, will trade off for a Galaxy sii i guess.
I had the same issue a while back. Believe it or not, the USB cable just up and flaked out on me. I bought a new cable and it worked fine afterwards. Of course that was my last thing to check, but I had the cable for about 6 months. I travel a lot, so I think wear and tear got the best of it. It's worth checking...
swap usb cables, also canned air to the usb port on the phone wouldnt hurt
This just happened to my inspire as well. Charge is OK, but no more Mass Storage connection. I have tried on multiple computers and multiple cables. I even reset the phone back to stock and it still didn't work. Oh well. I have a Vivid on the way.
trahajopro86 said:
This just happened to my inspire as well. Charge is OK, but no more Mass Storage connection. I have tried on multiple computers and multiple cables. I even reset the phone back to stock and it still didn't work. Oh well. I have a Vivid on the way.
Click to expand...
Click to collapse
Hei, I returned my inspire and got a sensation...
Inspire 4g not connecting to usb
I just got my Inspire 4G from AT&T... and guess what... no data connection at all. I tried everithing! nothing... so I just bought a new micro usb data cable!!! and voila!! everithing is going perfect... now i´m able to connect!!!
AT&T ships a only-to-charge cable... so get rid of it !!! that´s it.
Bye.
valdart said:
I just got my Inspire 4G from AT&T... and guess what... no data connection at all. I tried everithing! nothing... so I just bought a new micro usb data cable!!! and voila!! everithing is going perfect... now i´m able to connect!!!
AT&T ships a only-to-charge cable... so get rid of it !!! that´s it.
Bye.
Click to expand...
Click to collapse
ATT ships an HTC data cable. They do not ship a charge only cable. Most likely you just got a bad cable.
I was following (like an idiot) the instructions for the Advanced Ace Hack Toolkit.
I uninstalled the My HTC phone that was listed in mY Device Manager
64 bit Windows 7 Pro.
Now, no matter what drivers I try to browser for, my computer cannot find a driver for 'Android Phone' when searching.
The HTC Drivers 3.0.0.0.7 installer doesn't seem to do anything, and crashes, saying it's not installed correctly.
Has anyone had this happen, and can correct it?
valdart said:
I just got my Inspire 4G from AT&T... and guess what... no data connection at all. I tried everithing! nothing... so I just bought a new micro usb data cable!!! and voila!! everithing is going perfect... now i´m able to connect!!!
AT&T ships a only-to-charge cable... so get rid of it !!! that´s it.
Bye.
Click to expand...
Click to collapse
Agreed with Ago, you likely have a bad cable. please dont confuse new users. I would go back to att and get them to replace it.
pkopalek said:
I was following (like an idiot) the instructions for the Advanced Ace Hack Toolkit.
I uninstalled the My HTC phone that was listed in mY Device Manager
64 bit Windows 7 Pro.
Now, no matter what drivers I try to browser for, my computer cannot find a driver for 'Android Phone' when searching.
The HTC Drivers 3.0.0.0.7 installer doesn't seem to do anything, and crashes, saying it's not installed correctly.
Has anyone had this happen, and can correct it?
Click to expand...
Click to collapse
First, I would like to know what part of following the instructions causes you to be an idiot?
Second, did you uninstall HTC sync?
Third, I would like to know IF you have tried running the installer as an admin OR if when you run the installer, it has the user account control pop-up asking about changes and the computer (or if you have disabled that through user accounts)
(Oh and I used AAHK's same driver installer on my Windows 7 x64 computer without an issue... sooooooooooooo it's likely a local issue, such as needing to verify the download's checksum, disabling antivirus [something about the first line where in the same section as uninstalling drivers], etc)
AND, a tool like at this page might help a litte... http://www.howtogeek.com/howto/windows-vista/view-the-list-of-installed-drivers-the-easy-way/
or if you wanna command line it...
http://www.howtogeek.com/howto/wind...t-of-installed-drivers-from-the-command-line/
No joy my end either trying to install that HTCDriver3.0.0.007 on a Wind'ohs 7 x64 Shuttle
In certificates under options for this installer, "This certificate has expired or is not yet valid" Valid from 11/ 01/ 2011 to 17/ 01/ 2012". Can anyone help me to locate a driver that I CAN install to let me unlock a HTC Desire please?

[q] bluetooth not working

I HAVE INSTALLED F1_Innovation_HD_v7.0__WIPE ROM,after which my bluetooth is not working,it is visible to other devices ,but when i try to pair it with other devices ,it simply fails. Wat to do?
akshay.bad said:
I HAVE INSTALLED F1_Innovation_HD_v7.0__WIPE ROM,after which my bluetooth is not working,it is visible to other devices ,but when i try to pair it with other devices ,it simply fails. Wat to do?
Click to expand...
Click to collapse
Remove the device.
Reboot.
Add again.
This normally works.

Categories

Resources