I've seen a few of these questions on the forum but each one had deffrent answers depending on the version.
I was following this guide Wizard Windows Mobile for newbies and all was going well until one of the links went out and I could not find the T-mobile Official WM5 ROM, so after trying a ton of different roms/flashers I got anxious, mis read and installed "[ROM] Prophet S4V.19213.01 (Clean)" Now I cant get past the splash screen.
It's a Cingular 8125 with IPL: 10.1 and SPL: 1.08
Thanks in advance
EDIT:
I was able to enter boot loader mode and I was able to go back to the begging of the tuttorial and flash Button ROM to the phone, How all I need is a suggestion of a rom to use instead of the T-mobile Official WM5 ROM
Click to expand...
Click to collapse
EDIT:EDIT:
nevermind I found another host for the file RUU TMobile US WWE Ship.exe
Last Edit:
I updated the Wiki page to reflect the new link.
Related
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
ashtrays said:
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
Click to expand...
Click to collapse
i would flash back down to the button rom to get your ipl/spl back to 1.01, then try the Xda_MiniS_LaunchROM_v154102 that is listed in the guide if you havent already. were there any errors when you were doing the CID unlocking?
download the wizard service tool if you dont have it (Wizard Upgrading forum) and see what the CID Actions button says when you choose read CID block.
okey, thank you so very much i will try that now and i come back with an answer how it work later there were no errors due the CDI unlocking haha my english is very bad
Edit: now i have installed the Xda_MiniS_LaunchROM_v154102 but i get stuck every time in the customization "installed signed_discobutton8.sa" i get stuck there, does it matter? Can i restart my PDA and it works as i schould do?
Sincerly yours// Johan
Now i have installed wizard service tool v4.2.1.. and it says that is CID unlocked and SIM unlocked. What do i do now to install wm6 touchflo with cube. I have download this rom: Artemis Touch 3.01 full. How should i do now?
Best regards// Johan
Edit: do i have to install windows mobile 6 so i can install a touchflo and cube rom?
best regards // Johan
he i have wm6 on wizard 8125 and when my provider is at&t,,well i have 2 questions, On the boot where is says ISP:3.06 and SPL:306. how do i remove the t-mobile picture and all the programs that are for t-mobile?? and the 2nd question is when it does start up ther is an message which says "THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND." the last question is where do i get the "sddaemon: and "sddialer" also "wtcvpdf" from? because some of my programs from my program section wont open Thanks
I have the same problem.. any solution?
vickg96 said:
he i have wm6 on wizard 8125 and when my provider is at&t,,well i have 2 questions, On the boot where is says ISP:3.06 and SPL:306. how do i remove the t-mobile picture and all the programs that are for t-mobile?? and the 2nd question is when it does start up ther is an message which says "THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND." the last question is where do i get the "sddaemon: and "sddialer" also "wtcvpdf" from? because some of my programs from my program section wont open Thanks
Click to expand...
Click to collapse
Confused here !!!
Wizard 8125...with wm6...IPL/SPL 3.06 ?...t-mobile loading screens and programs ?...provider at&tt ?........
Hard to swallow all this !
ok,let me try to get it straight :-
1. Initially it was on at&tt Rom wm5,right ?
2. Did you try to upgrade to wm6 ? and flashed the T-mobile 2.26 Rom ?
3. Its not ipl/spl 3.06 but ipl/spl 3.08,which you must have gotten by flashing the IPL/SPL 3.08,right ?
well,T-mobile 2.26 is also a wm5 official rom and not a wm6 rom,therefore,by flashing an official t-mobile rom on your already at&tt official rom,has just changed the OS from At&tt to t-mobile OS,but certainly not to a wm6 Rom. That's why your load up screens and programs are of T-mobile.
Plz correct me if I'm wrong somewhere,ok
Have a nice day
the splash screens can be easily changed. search for them on here. you will find a few different ones.
for the other things, they were from the extended rom which wasnt installed.
gehzumteufel said:
the splash screens can be easily changed. search for them on here. you will find a few different ones.
for the other things, they were from the extended rom which wasnt installed.
Click to expand...
Click to collapse
Its not about splash screens !
How wud you explain this.....Provider At&TT....T-mobile Rom (OS).....Wm6 ?
I don't think T-mobile is offering any wm6 upgrades,atleast not to my knowledge.Care to update me ?
Cheers!
Hello All,
Firstly let me apologize if this has been answered already, but after hours and hours of reading I am still unclear on a few points.
I want to be able to take a complete backup of my Stellar before I update anything in case of any future problems, so that if need be I can revert it back to the same state as it is in now before sending it back to O2.
1 - Is this feasible / possible?
2 - I know I can unpack and repackage the OS ROM, but what about the radio / spash logo & SPL?
3 - Can all the CID, Security and SIM locks be replaced if required?
Can anyone recommend the best course of action for me to take, so that I can dump everything first, in a format that can be easily re-flashed, before I start to load HardSPL etc and then suddenly find I am S.O.L and cant return one component to the original version..
If anyone would like copies of the original Firmware / Logo / Radio etc after I manage to dump them.. I'll be more than willing to share - provided you dont mind giving me hand with dumping etc
FYI - Here are the Versions on my device:
Radio: 1.27.12.32
Protocol: 22.45.88.07H
ROM Version (from Bootscreen): 1.82.00.00
ROM Version (from Device Info): 1.82.206.1 WWE
ROM Date: 10/04/2007 (Not sure if thats 10 April or 4 Oct)
WM6 Pro. CE 5.2.1622 (Build 18128.0.4.4)
Model No.: Kaiser
Thanks in advance...
you could try searching, someone has probably done all the dirty work in dumping and reconstructing the o2 rom already
XtreMe_G said:
you could try searching, someone has probably done all the dirty work in dumping and reconstructing the o2 rom already
Click to expand...
Click to collapse
From what I can tell, but I may be mistaken, this ROM is a different version to the Shipped / Reconstructed ones on the Kaiser Wiki...
Also, the splash logo on my Stellar, is definately different to the O2 splash logo that is available via download... Mine shows a 'wireframe landscape' while the other is the same bubbles splash that I had on my Wizard (O2 Xda Mini-S)...
I have a Stellar and would love a copy of the O2 ROM as I have flashed without backing up so if you manage it I'd be in the queue for a copy.
there is a rom available, but it doesnt restore the spl or the front splash screen. anyway these could be extracted?
hi
where is the rom located?
O2 Stellar ROM
seconded! I too now need the ROM, but have searched the site and the FTP to no avail, anyone have a dumped ROM that they can point me too please...
TIA
Try
http://forum.xda-developers.com/showthread.php?t=349123&highlight=stellar&page=2
THANKS!
... you are a lifesaver
(not too sure why I could not find that myself tho )
I was reading the Wiki/FAQ and found this thread and still have some questions on the ROM Radio configuration.
I have a tilt I got from work and the reception is attrocious, so I am under the impression that the ATT ROM and Radio have more affinity for the ATT network than Tmobile (which is my guess because my old Wing had much better signal). What I notice from the list of Kaiser ROMs (on the Wiki) is the only official Tmobile ROMs are for the Netherlands and the UK. My guess is that I wouldn't want to load those since I live in the US, plus the official OS build is 19124 in the ATT tilt instead of 19212 in the other builds.
My question is: Can I mix other Radios to better work on the Tmobile network? Do I need to clear my ROM from the official ATT to another HTC ROM? Does the ROM clear the Windows build so there wouldn't be a compatibility issue, or does it only work for the cell phone service (device communication portion sort of like a DOS on windows 98) and therefore the OS build is independant of the ROM and Radio? Do ROMs and Radios need to be properly paired or can I trial and error it?
I've been looking for some of the answers but the weren't overly appearant from the FAQ and Wikis. Hopefully I didn't gloss over the easy answers somewhere on the site.
Any thoughts? I can start doing the trial and error method, but if I can get some confirmation that I won't brick my phone that would be awesome. Also, if there is any general "method to the madness" in terms of trying the Radios out, I would appreciate it.
This is where you should start:
Flashing Your First Kaiser Rom
The most important consideration for flashing any phone: MAKE SURE YOU HARD SPL (if you are using a Tilt, I recommend 3.56 as that is what AT&T officially used in their last ROM). That way, if you screw up a flash, you can just flash to another radio/ROM without worrying about bricking your phone. Press the Camera+Power button+use your stylus to reset the phone to bootloader to see if your phone is already Hard SPL'd. You should see a 3.28, 3.29, 3.34, or 3.56 at the top left of the screen when the tricolor screen pops up; you can just reset your phone after looking to get back to your OS). If, and only if, your phone is Hard SPL'd, read on...
>Can I mix other Radios to better work on the Tmobile network?
Of course. For example, I am using the emobile radio (1.71.09.01) on my Tilt. See: The Ultimate Radio Thread for more.
>Do I need to clear my ROM from the official ATT to another HTC ROM?
No, you can flash the radio only if you want.
>Does the ROM clear the Windows build
Not if you're flashing just the radio.
>...and therefore the OS build is independant of the ROM and Radio?
The OS build is independent of the radio. Best to think of the ROM as the OS, and the radio as how your OS communicates with your phone...
>or can I trial and error it?
That's the whole point of flashing just the radio--finding which one works best for you.
Thank you for the information. I verified the Hard SPL (3.56) so it looks like I am good on that front.
I just want to verify something you said before I actually do this (since the RUU tutorial told me ROMs can brick my phone and you mentioned Radios are similar in that fashion). The radios listed from the Ultimate ROM/Radio Thread are listed by WMx.x version, not by the associated ROMs. Since I am using the officially released ROM from ATT my version of WM is 6.1, therefore any of the Radios under the 6.1 header are available for flashing to my phone.
Is that correct?
Thanks again and in advance.
Anyone know of a new link for the latest Hard SPL 3.56? I keep on trying to download on rapidshare and I am denied (cause I am a non-subscriber). If there is a mirror that anyone knows of I would appreciate it. I keep searching around and cannot find one.
blackie_chan said:
Anyone know of a new link for the latest Hard SPL 3.56? I keep on trying to download on rapidshare and I am denied (cause I am a non-subscriber). If there is a mirror that anyone knows of I would appreciate it. I keep searching around and cannot find one.
Click to expand...
Click to collapse
I just DL this and uploaded it for you 3.56
Zelendel you are awesome. Thank you very much.