Don't know why, but for some odd reason the Fuze just decided to switch to compact QWERTY, and when I try to change it from the input menu, it just reverts right back to compact QWERTY. Any help on how to make it stop this?
Go to a place where you get the touch keyboard and look at the icon at the bottom, theres an arrow designating a menu. Open the menu and change it to the keyboard of choice.
Related
Anyone knows how to remove this black banner
When i type a recipientname i only get one name and this black banner
also with the message i type
disable xt9 and word suggestion
I did disabled the word completion, bud where to complete disable te xt9 ?
input methode => touch keyboard => i remove the checkbox there
Weird thing is, it doesn't show up every time you use the keyboard. In one screen it does and in the other screen it doesn't (or I'm blind).
The settings you changed should work I think.. lemme see:
start -> settings -> input -> *select 'Touch keyboard' from list* -> options -> XT9 settings.
In the XT9 settings you can turn off word completion etc.
However, I'm not sure if that also turns it off for the normal keyboard. I would assume it does, but you know what they say about assumptions eh
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Try this. Will Disable xt9
Works great thanks
I have exactly the opposite problem - Word Completion doesn't work at all even though I set ip up several times in the "Input" menu (in "Settings").
Any suggestions??
Thanks.
John_A said:
Try this. Will Disable xt9
Click to expand...
Click to collapse
Hi Im new here... been wanting to disable the XT9 input from htc touch. Will the attached above work on htc touch 2nd gen? thanks!
Blackfire said:
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Click to expand...
Click to collapse
Does that also disable T9 for the Touch Keyboard and Keypad?
Hi, I tried this CAB file and it works for the DUAL. May be you guys can give it a try. I got it from the HTC website. Good Luck!
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Swidge said:
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Click to expand...
Click to collapse
I would like to know this aswell, I become very fond of this on my Orbit 1 (artemis) and liked that it learned words that you used frequently.
Exactly, I had the Orbit 1 and have now upgraded to the Orbit 2. The way it learned words was great, but it didn't interfere with what you were typing. I'd rather it assumed I was correct and let me choose when to go with it's suggestion.
Ah ha! I have managed to rid myself of the XT9 and get the nice old native pocket pc word suggestion back!
I installed PocketCM Keyboard. That's it.
As I was typing on the new keybaord I noticed word suggestions coming up as well as the PocketCM Keyboard suggestions. I then swithced back to the standard keybaord and the classic word suggestion was back! I went into word suggestion options and changed it to my favourite settings and hey presto, it's working as good as the old one was. It also gives me the nice standard list of contacts when typing a name into my SMS 'to' field. Fantastic.
I don't know if it was a fluke or if it would happen every time you install PocketCM Keyboard, try it out. I don't know if you can get the XT9 back though, and the XT9 doesn't work for the touch keyaord and keypad now either rendering them practically useless, so be warned.
I also haven't reset the phone since this discovery so i don't know if it's permanent, but, crossed fingers...
Swidge
Blackfire said:
When i type a recipientname i only get one name and this black banner
Click to expand...
Click to collapse
You can scroll through the available recipients at this time by using the scroll wheel.
How I can completely swich off Touch keyboard and Touch keypad?
Henry100 said:
How I can completely swich off Touch keyboard and Touch keypad?
Click to expand...
Click to collapse
I don't know of any way to switch off the touch keybaord and keypad, but you can switch to another keyboard easily enough. If it's the black bar with predictive text in it you can switch it off pressing the XT9/ABC button on the touch keyboard, then using the keyboard of your choice. However this does not replace the XT9 predictive tet with the old style word prediction. The only way I found to do that was to install PCM Keyboard. I don't know why that reactivated the old style word prediction but it did.
Also, in addition to my previous post, i have reset my phone a number of times and the old style word predition has stayed. It seems to be a permanent solution, even if i don't know why it works.
I hope that helped.
Swidge
Thanks Swidge. You are awesome!
noooo....
i have the reverse matter
i want to display that black banner....but the version of HTC Keypad+Keyboard I've installed won't do that....
arggggg...
someone can suggest me an htc keypad+keyboard cab with this black banner???
plese i need it
I've had my touch pro for a few days now after upgrading from a wm6.1 Tytn II but no matter what i try i can't get word suggestion to come up with anything when using on-screen keyboard. I've gone through all the settings i can think of. Anybody else having this trouble?
Same here. Tried in the regular settings, as well as in Advanced Config, but to no avail...
Ok here is a fix that i found. When you turn on the on screen qwerty keyboard you have to switch off t9 and switch it to abc. This has worked for me for both on screen and hardware keyboard. Hope this helps
Bxsteez said:
Ok here is a fix that i found. When you turn on the on screen qwerty keyboard you have to switch off t9 and switch it to abc. This has worked for me for both on screen and hardware keyboard. Hope this helps
Click to expand...
Click to collapse
tried that, still the same.
That's strange.... What on screen keyboard are you using?
Bxsteez said:
That's strange.... What on screen keyboard are you using?
Click to expand...
Click to collapse
'keyboard', same as the old stardard keyboard, small keys so i have the numbers at the top.
johnk1973 said:
tried that, still the same.
Click to expand...
Click to collapse
same here, still doesn't work...
Standard keyboard does have any word completion dictionaries installed for the Diamond or the touch Pro.
If you want word completion, you need to use the full QWERTY htc keyboard, not the standard WinMo keyboard.
Problem persists...
Turned off T9, switched to "ABC", ans I am using the hardware keyboard. The same problem persists. The black line still appears at the bottom of the screen, when I type something it appears both at the "correct" location plus on the bottom black line. If I make the mistake of using the keyboard arrows - crash boom bang. A lot of words appear near my cursor. And the funny part is that I always have to read my SMS before sending it: this magnificent auto completion method somehow finds a way of adding unwanted words somewhere in the message body. It is *very* annoying.
I don't always use English when I type a message, and, horror: sometimes I even don't use punctuation, because I'm in a hurry.
Did you try to go in the T9 options and untick everything, and go in settings -> Inout -> Word completion and untick everything as well?
Full QWERTY and T9 on for me works!!!
Found this cause I was having same problem...passing it along
To fix the Word Completion function on my Sprint HTC Touch Pro. It turns out the problem has to do with the installation of the new Full QWERTY keyboard that came with the ROM upgrade. My Word Completion was not working in Block Recognizer, the original Keyboard or the Letter Recognizer UNTIL I did this simple fix.. Here is how to do it:
* After confirming that you have the box checked for "Suggest words when entering text" in the Word Completion tab found in Settings>Input.
* Open up a new email or text message.
* Go to the bottom of the screen and change your letter input method to Full QWERTY (using the down arrow next to the "pencil", "keyboard" , etc. icon).
* In the bottom left hand corner of this Full QWERTY keyboard, just to the right of CAPS/shift button, is a button to toggle between T9 and ABC.
* Click the button and make sure that T9 appears below ABC. Apparently the opposite appears as a default setting.
* Switch back to Block Recognizer, Keyboard or Letter Recognizer and Word Completion should be active for you!
when using the keyboard this is not working . . .
Doesn't work for me either
I can't even get T9 to work with the full QWERTY keyboard...
If you install this: http://forum.xda-developers.com/showpost.php?p=2914474&postcount=8
Then you can get the old fashion word completion back on your Touch pro BUT it only works for the regular keyboards (not the new Touch Pro or Compact QWERTY Keyboard) Happy tappy would work with this. You need yo soft reset after installing this.
It will put you back on the old format with the old dictionary and auto complete and auto correct...but no more pretty keyboard...
What about auto complete with the harware keyboard
Still doesn't work with the hardware keyboard, any ideas?
Found the fix here: http://forum.xda-developers.com/showthread.php?t=425405
Word Completion
Same problem here, not getting word completion when typing, even though I have it turned on. I would like a fix for this.
Does anyone have word completion working?
James
word completion
was anyone able to find a fix? i have the fuze and my word completion is turned on but not working.
It does work for the physical keyboard but you still need the onscreen keyboard set to either Happy Tapping or the standard windows keyboard. it cannot be set to Full QWERTY. Also, a soft reset is required since the dictionaries go into the ROM on resets...
Whats goin on
Whats going on man!!!
Does anyone know if there is a fix for this stupid problem
I have word completion working on inputs all except the full qwerty and compact.
It works when you backspace after a few letters???
Please help someone
I seem to have an opposite problem with word completion. When I type in an email or sms, the word suggestion forces me to use its word. The change gets made automatically. Usually the word replaced is not what I wanted. I have tried unchecking the word suggestion/correction and made similar choices in Advanced Config. How can I stop this forced word replacement? Is there a registry hack that would stop this for good?
it is not working , any solutions
touchhdfreak said:
Whats going on man!!!
Does anyone know if there is a fix for this stupid problem
I have word completion working on inputs all except the full qwerty and compact.
It works when you backspace after a few letters???
Please help someone
Click to expand...
Click to collapse
Same problem with me.
when i open my keyboard the sip switches to full keyboard - when i slide the keyboard in the sip remains on full keyboard- is there anyway for it to automatically get it to revert back to the compact qwerty
Before flashing a new rom to my tablet, when I used samsung keyboard and went into handwriting mode, I was able to switch back to QWERTY with a click of a button. But now, instead of the keyboard icon, there is the settings icon; therefore I need to press and hold it so that it shows the keyboard option.
Is there a way to set up the keyboard so that the default of that icon is back to QWERTY and not to settings?
I know it's not a big deal, and that I could switch back to QWERTY by pressing and holding. However as a student, it'll be helpful for me to be able to switch from handwriting to QWERTY quickly.