I discovered a few very strange folders and files on my Storage Card. I have tried to format the card succesfully, but now thery reappears.
Names are like K²¦°+¸í°.1§( and n_.ke. A few GB
A few Gb is size, which is of course not true.
I have tried to delete them with eather the notrmal PDA explorer, Resco Explorer and by Windows via ActiveSync., but thia all without succes.
Bart :evil:
Strange folder names
Same here.
I allways thought TomTom navigator was causing them.
same thing happed to me when i started using a 1GB sandisc SD card. real pain!!! cured mine, 1st i used my SPV to format card as my laptop wouldn't fully complete. then put sd in card reader, plug in card reader then switch on computer. once computer is running put stuff on sd. when finished pull out sd and lock it!! then put it in XDA. works fine for me now. hope this is of some use.
found this,seems good.
found this today, good, quick clean-up for ppc
Thanks, I had the same problem after using Tomtom with Checkpoint. After formatting al works again!
This caused by the FAT table is corrupted (this is a part of the hdd/memory card, where stores which file is where is on the disk/card and what it its size). I have this on my PC few years ago... 60GB on my 1.7 GB HDD...
Hi, I have a problem with my storage card since last week.
The system (Resco Explorer 5.14, File Explorer, Pocket Mechanic) says that I have no more free space on my storage card (Lexar 512 Mb) though actually there is still 60Mb of free space..
It never happened before..
BUt then if I pull out the storage card & put it in back, it will be normal again (I have 60 Mb free space)..
I haven't noticed what is the cause of this problem..
I use WM2003SE 2.06 WWE...
Anyone here know the solution ?
Thanks..
I have the same problem, the problem doesn't happen if you have more available free space...
I had a really annoying problem the other day. I had a lot of files on my Kingston 512 MB sd card but they were not available in my Qtek 2020. Then I thought I could read them from my PC - but no! So, I had to format the card.
Did anyone experience this?
this happens to me all the time unfortunatly
i have a cheap 1gig SDand it locks up my XDA IIi alot, it also reports as being full when it has plenty of space left.
I think its more to do with it being a cheap card so i'd go with a well known brand next time.
Mine is a kingston ultra 512... The only problem i have is the free space problem... Otherwise it works fine...
My Qtek 9000 cannot recognize 4GB SD card (DANE-ELETC)
Your help much appreciated.
Rom 2.05.00
Rom Date 04/09/07
Radio V. 1.15.00
Protocol 42.51.P8
I guess you mean 4Gb SD Card.
Is it SDHC?
If so, then it would be worth looking in the Universal accessories board at what people have to say, which is 'no' for the sdhc cards.
I bought a 4 Gb card but it is a non-sdhc type so that it would work.
Cheers
Fish
I can't seem to find the manufacturer's website. Can you post the the spec sheet of the model you have got?
fishtastic said:
I guess you mean 4Gb SD Card.
Is it SDHC?
If so, then it would be worth looking in the Universal accessories board at what people have to say, which is 'no' for the sdhc cards.
I bought a 4 Gb card but it is a non-sdhc type so that it would work.
Cheers
Fish
Click to expand...
Click to collapse
Yes is a SDHC, So the qtek 9000 need a non=sdhc type 4Gb Card.
Thank you
jose
josedias said:
Yes is a SDHC, So the qtek 9000 need a non=sdhc type 4Gb Card.
Click to expand...
Click to collapse
Exactly...I'm using a 4Gb transcend non-HC and it's works find ...!! I heard about problems concerning the SDHC for the universal... Maybe you should change your SD
Transcend 4GB 'SD' card getting corrupted repeatedly
I have one annoying problem,It is the third time that my Transcend 4GB SD card got corrupted without any reason ( as far as I know ).
It goes like this --I just moved one .jpg image ( clicked with my Universal ) from main memory to card -- a my document--my pictures folder,then I checked it ,the entire my document folder is empty..around 150 MB.No data recovery tool can retrieve it.
The default file explorer and Resco explore read the card differently --950 Mb and 1100 MB respectively.The data is gone,the space 150 MB is gone.On previous two occasions,there was not any transfer of any data from device to card yet it happened .I had the card replaced,but it is very annoying to live in this impending possibility of losing the data.
What is the cause of this problem?WM6?Universal?ROM?4GB?Transcend?
I never had this problem with 1 GB cards.What is the solution?Please suggest something,anything.
There are a couple of WM6 roms which can corrupt your SD card.
But it shouldn't make a difference if you have a 512 mb card or 4 gb.
Did you upgrade to WM6 and then got the 4gb card?
You could try to flash back to the original wm5 rom from your manufacturer, good change the problem's gone then.
ROM change?
No Sir,
I did have this problem with WM5 and to get rid of it I shifted to WM6,but the problem persists.Other people with WM5/6 with 'NCP' 4GB are doing fine,I am also going to try it.Like I said I never had any problems with 1GB.
I like the HTML mail support in WM6 and I need it for the attachments so I'd rather keep WM6.
One more thing, the file explorer SOMETIMES shows two separate folders viz. storage card 1 & storage card 2, and in storage card 1 there are only files called mail attachments.At the same time all the today shortcuts and programmes on the card are 'uninstalled',Then I have to hard reset and install the back-up file and everything comes to normal.What does it mean?Please clarify.
kalya said:
One more thing, the file explorer SOMETIMES shows two separate folders viz. storage card 1 & storage card 2, and in storage card 1 there are only files called mail attachments.At the same time all the today shortcuts and programmes on the card are 'uninstalled',Then I have to hard reset and install the back-up file and everything comes to normal.What does it mean?Please clarify.
Click to expand...
Click to collapse
This is a known issue. Sometimes the system forgets about the exixstence of SD card. You can brows here for such cases. People claim that it happens while the battery goes low or for some other reason.
However, if this happens, and some of your apps are set up for using Storage Card for saving it's data, then the system creates a folder named "Storage Card" in the main memory. Then if you softreset or recharge your device, the system finds again your SD card and tries to give it a name "Storadge Card", but this already exists, so it names it as "Storadge Card1", and so on.
Solution:
Ither delete the "Storage Card" folder from main memory or rename it as you wish, and then rename your card as "Storage Card" and softreset your device. It should help.
okay
Tadeusz said:
This is a known issue. Sometimes the system forgets about the exixstence of SD card. You can brows here for such cases. People claim that it happens while the battery goes low or for some other reason.
However, if this happens, and some of your apps are set up for using Storage Card for saving it's data, then the system creates a folder named "Storage Card" in the main memory. Then if you softreset or recharge your device, the system finds again your SD card and tries to give it a name "Storadge Card", but this already exists, so it names it as "Storadge Card1", and so on.
Solution:
Ither delete the "Storage Card" folder from main memory or rename it as you wish, and then rename your card as "Storage Card" and softreset your device. It should help.
Click to expand...
Click to collapse
Okay,
Thanks for explaining and the simple solution.
But a soft reset doesn't solve it,reinstalling the backup(I use SPB)does.
But what about the card getting corrupted,losing data and vanishing folders?Is there any cause and solution for it? Or should I go for another card manufacturer as decided?
i have tested 1 gig sdhc
i have tested 1 gig sdhc toshiba class4 and it worked on universal
onlineemails said:
i have tested 1 gig sdhc toshiba class4 and it worked on universal
Click to expand...
Click to collapse
SDHC start at 2gb, you have a normal SD.
Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch.
mamaich said:
SDHC start at 2gb, you have a normal SD.
Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch.
Click to expand...
Click to collapse
mamaich, you are wonderful.
mamaich said:
SDHC start at 2gb, you have a normal SD.
Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch.
Click to expand...
Click to collapse
Does this patch involve physically deforming the SD Card such that its lifetime warranty (lifetime warranty is applicable to some SD cards only) becomes void?
Does this patch involve physically deforming the SD Card such that its lifetime warranty (lifetime warranty is applicable to some SD cards only) becomes void?
Click to expand...
Click to collapse
LOL
_____
RE
Quote
"Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch"
Can it work with the Universal running WM5?
Thanks
FOSA said:
Can it work with the Universal running WM5?
Click to expand...
Click to collapse
Very curious to hear the answer to this as well!!
FOSA said:
Can it work with the Universal running WM5?
Thanks
Click to expand...
Click to collapse
no. WM6 aku 0.2 and later are required.
mamaich said:
LOL
_____
Click to expand...
Click to collapse
I always wished a scenario would come up where I could ask such a question and make it seem valid at the same time
How about 4GB SDHC?
If 8GB SDHC can be used then how about using a 4GB SDHC card?
And please make it possible,soon,Mamaich.Thanks.
Hi all,
I wonder if it is posible to upgrade from a 2Gb SD-card to a new 4GB one without loosing all the programs that I have intalled to the 'old' card..?
Thank's in advance for any advice!
no prob, simply copy all content of 2GB card to 4GB - thru PC & reader, if U dont have reader, use Softick Card Export - newest v. works w/ Polaris - at least its written on their site.
Just did mine a couple of days ago, swapped out the default 1GB card for a 4GB micro SDHC one...just copied all the files (must make sure you copy all the hidden+system files as well) across.
Works fine and now got best part of 3gb left to fill
OK, thank's, I'll go look for a new 4GB card..!
I'm new to Windows Mobile devices, having previously only used friends' before. I have orderer the Touch Pro, but I think this is more a general question, so I'm posting it here.
Is it safe to swap the SDHC cards while the device is on? I have ordered an 8GB card, but I also have a 4GB card already. I was wondering if I can put movies for example on the 4GB, while having music and everything else on the 8GB. This means I can bring more data with me.
Some programs will be installed on the storage card, so what happens when the card they are installed on is removed?
Also, is it best to install most things on the storage card or internal? I've seen reports of some programs not working well or at all unless installed internally. Is that common? Id rather not fill up the internal storage too fast.
Thank you
sum notes:
ur 4 gb card will prolly load up the appz much faster then the 8gb , i hate how slow my sandisk 8gb card is compared to my 4gb patriot card
definitely try to get the more xpensive higher speed cards
sum progs only work if u install it to the device memory and not the SDMMC
when u take out ur sdcard , and put in another one, u prolly gotta reboot so the pda can refresh/view it
to transfer files i use softick card exporter v3.12
GL
ok, but what happens to programs? are the links still in the programs folder after the sdhc card they were installed on is removed?
if i have tomtom on the 4gb card and the rest on the 8gb card, will everything work ok without having to restart between swaps?
Jiggs1337 said:
ok, but what happens to programs? are the links still in the programs folder after the sdhc card they were installed on is removed?
if i have tomtom on the 4gb card and the rest on the 8gb card, will everything work ok without having to restart between swaps?
Click to expand...
Click to collapse
Any program you install on a card, if you remove the card, of course the program icons won't work. Just plug the card back in, no need to soft reset and it will work.
I suggest, use your 4 GB card for ALL your programs including TomTom with maps, so you can place all your videos and music on the bigger 8 GB card. I doubt you can fill the 4 GB with just programs, unless TomTom's maps are bigger than 4 GB. That way, the only time you have to insert the 8 GB card is during music and video playing.
Better yet, try installing ALL your programs on the 8 GB card, even music and video files. I am sure you will keep all your music files. For the video files, if you are like myself who after watching the converted DVD files, deletes them off the card so to place a new DVD movie file to watch. THERE IS NO NEED TO TAKE OFF THE CARD FROM THE DEVICE, all you need is WM5torage which is a FREE program that will let you view the card as an External Disk Drive. In other words, WM5torage turns your device into an instant card reader without removing the card itself from the device with just a push of a button. So deleting or file transfer is WAAAAYYYYY faster than using active sync.