Related
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
"think" you followed all the directions?
sorry for my bad english or leak of knolge in this part of the world i just read so much regarding this subject ant the more i read the more i got confused
so i just sow the first logical faq and followd him, plz i need my phone all my life is in their, help me.
danny
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
Things that will help others help you:
1. where are you located?
2. who is your provider
3. what ROM WERE you on?
4. ok - you had a phone that was working - and you did:
a. what did you do first?
b. second?
c. etc.
Your message KINDA indicates that you flashed a ROM and had issues - so you THEN flash HARDSPL? was that successful?
Bill
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
you don't have hardSPL installed..! surprise, surprise
u don't have hardspl flashed from bootloader info u provided. flash hardspl be4 flashing any roms.
please search and read; this has been answered many times.
p.s. use the new hardspl by jocky which is a sticky in this forum.
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
OK - I do not think that you got the HARDSPL installed on your phone correctly - BECAUSE - I believe that it would say OLIPOF or JOCKY on it and it does not.
I have not seen the new HARDSPL 328 and 329 but it LOOKS like to me that you did not successfully get the HARDSPL on your phone.
Personally - I would scan the message boards for GSLEON3 (user name) and send him a private message - there are many others that can help you and he or others MAY come trolling by and take pity on you - but at the moment he is the one that helps people in your situation the most from what I have seen.
I would NOT continue to work on it myself as you can definitely mess your phone up permanently. Does your phone still go into boot loader mode? If so - can you flash the required HARDSPL onto your phone?
Find a message that GSLEON3 has left and then lik on his name and send him a private message - he is very nice - BUT - he is VERY busy - continue to be nice and he will most likely get you back and running.
Bill
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
speebman said:
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
Click to expand...
Click to collapse
Danny -
Deep cleansing breaths here ok?
1. personally - I would PUT BACK what ever you had on your phone and get it running again - trying at this point to get ot to go to a different ROM is not a good idea right at this minute.
2. 28 and 29 from what I read makes no difference - users try each one to see which one works better on THEIR flashed ROM.
3. What I would do is look for the HARDSPL that goes with what you had loaded to begin with - or the actual SPL that came with your original ROM and put that one back.
I would be stuck here because I have to use JUMPSPL on my phone because I get the white screen - but I THINK that (don't quote me because I do not do it this way) if you don't get the white screen you can just flash the HARDSPL to your phone without JUMPSPL (having to be able to copy something to your phone.
HOWEVER - if you cannot or do not know how to continue from reading the WIKI - you MUST request help from a professional - I have already recommended one. (GSLEON3)
Bill
my active sink is not seeing the devais, maby MTTY? wil help
speebman said:
my active sink is not seeing the devais, maby MTTY? wil help
Click to expand...
Click to collapse
Based on your current track record, I wouldn't suggest you use MTTY as you have a VERY HIGH probability of bricking your phone (ie: it won't ever be usable again).
so im fu--.
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
mfrazzz said:
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
Click to expand...
Click to collapse
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
speebman said:
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
Click to expand...
Click to collapse
Cool. Glad that worked for you.... NOW, your next task is to read and understand ALL the steps before you try flashing a custom rom. HardSPL that sucker (but understand and follow EVERY step before you try that) and then you should be good to go...
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Yes it is, but if you read this sticky at the top, it should help (start with noob guide which is the first link I think):
http://forum.xda-developers.com/showthread.php?t=369282
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Not to be mean but if you have red Wiki and looked at threads here and they "don't make sense to you". You really have no business flashing a rom. If you don't understand what you are doing sooner or later you will brick your phone from your lack of knowledge and it will be no ones fault but your own.
I am really surprised people were willing to repeat what has been typed out hundreds and hundreds of times on these forums.
Welcome to XDA
Hi all,
yeaterday I installed Nadavi HTC Camera cab file. the installation did not finished, it failed (however I see that the free space on the device is smaller now).
since then, the camera shows me "unable to initialize camera. failed to set up the camera device".
I tried:
to run it from windows/camera.exe
to put out the battary for 15 minutes
read all the related posts
installed the Nadavi_OLD_HTC_Camera_5_0_4_2915_00 - did not helped
is there any solution for this?
thanks,
Royi.
If all else fails you'll have to try a hard reset. Remember to back up all your contacts and messages first.
thanks for the respond.
is this the only solution for this issue?
I just done a hard reset, and it did not helped.
someone got another ideas?
i'm really sad about that one...
I would consider reflashing the phone with the same (or maybe a different/cooked) ROM; I'm positive that your problem is related exclusively to software.
Good luck!
i'm a newbe at this...
you got any guide or something like that for this procedure?
plus, what version do you recommend?
Just to rule out a bad ROM I'd flash the original 6.0 ROM first to verify that the camera indeed works. If not, then you must remove hardspl and send your phone to service. If it starts working again you can try the cooked 6.1 ROM again.
the problem is that i'm already using the original ROM.
I never installed a new rom.
my rom ver is:
1.25.405.1 WWE
radio:
1.58.21.23
Protocol ver:
25.65.30.04H
so, is it really needed to install the oroginal rom again?
If it's not modified, then it may worth taking your chance with the service.
bufnix said:
If it's not modified, then it may worth taking your chance with the service.
Click to expand...
Click to collapse
you mean to send it to HTC?
someone? help!
I don't know the camera fix you applied, so I don't know that it was trying to do. But since you have not upgraded the ROM or changed the SPL to HardSPL I would send it in for repair if you are still under warranty.
If not, I'd try reflashing the original ROM if you can get it. That way you will reflash everything in case the camera fix overwrote something, but that I find quite unlikely, but it's your last best hope if you are out of warranty, unless you want to pay for a repair that is.
this is the cab I installed
http://rapidshare.com/files/139218414/HTC.Album.1.0.1030.720.cab.html
thanks for helping me...
I flashed to udk7 diamond rom...it did not helped as well.
How can I check if this is a software issue or Hardware?
sorry for the nudging...but someone got any ideaz?
If you have tried both original and cooked ROMS, what do you think? I'd say it's obviously a hardware issue. Reflash original ROM and remove HardSPL and return the device to service.
I tried only to flash to udk7 ROM. is it worth a try to flash to the original one?
royi said:
I tried only to flash to udk7 ROM. is it worth a try to flash to the original one?
Click to expand...
Click to collapse
Yes, I'd certainly try the original too since it contains OS, radio and the whole lot.
Is your camera work one time or never ?
If never work just send the Phone to HTC or go to your operator ( SAB: Service After Buying ??? like SAV in france ?).
Have you try to flash with a new RADIO rom like 1.64.**.**
Where do you bought your phone ?
Same problem for me.
Send the phone to HTC. It's a hardware problem.
Don't try any flash o fixing. If the camera don't work after a hard reset, you have a motherboard problem.
Send it to HTC and they will change the board. I have now a new IMEI number.
Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.
Hi,
Please consider a new battery.
As strange as it may sound, one of my MDA Pro's had similar symptoms with battery at 70%. Replacing the battery with a new one fixed it right away.
The symptoms were:
- less network signal
- random turning off of radio
- could not access phone settings
- radio crash when trying GPRS connection
Also, on my other MDA Pro, I had problems like this, but they were caused by radio ROM 1.18. I changed to 1.15 and everything is fine since.
It seems that aging batteries are a major problem for weird issues. Just buy a new one at ebay and dont start flashing as a fool, cause you can risk a brick.
Cheers,
vma
My battery is actually new... just bought it 2 weeks ago.. and I tried the phone with both my new and old batt. still no luck -_-
I can't flash any radio rom now... is my Uni certified dead?
Any help would be great.. thanks
Try charging the battery first in another universal if possible, if battery is ok, put it in and try again, read Wiki and check if you can go to boot loader mode, check whether pc recognising the Uni once on etc.,
Read everything and the computer recognised my Uni ... tried MTTY tools to reset all the DOC partition in my Uni yet no way to reflash my radio rom again
I think as long as PC is recognising, dont consider it as DEAD. Its very much alive and keep hopes.
as I read through this forum, Radio ROM flashing is the most risky thing and often takes longer.
If you are not already considering, try only flashing radio rom and do not club with extrom etc, try redownloading the ROM or try a different version from a different link, unless you are particular about the one you are trying.
Always use the original USB cable supplied with the Uni.
Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. Connect Unit to PC to the USB port directly and not through a USB HUB.
Start flash again..
All the best
ronaldphl said:
Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.
Click to expand...
Click to collapse
From the problem behavior it seems your device got GSM locked, I'm afraid it's permanent. But at least try ...
1. Remove the SIM card
2. Must upgrade the bootloaded to 1.01 if it's a G3 (and not upgraded already).
3. Run the Buzz's CID unlocker tool and flash the radio (version 0.00) provided with the tool.
4. Do the HR and check the status
Hi,yesterday I flashed a new rom for my wizard.
the rom is:TNT.20273_Professional_Wizard_HTC_Home_FREE
after the first reboot(soft restart)the phone is stuck in the first splash screen(where you see the IPL/SPL), even hard reset is not working(Comm manager+voice button+reset).
what can I do-please help!!!
go into bootloader mode and flash with wizard love rom thats the rom every wizard owner should have ,,and also remember before flashing to any rom 1st flash to wizard love rom
how to go into bootloader mode?
and where to get love rom from?
keep camera button in while switching phone on ,,,,and use the search option
to find the love rom
o.k I figure out the bootloader part.
but now how to flash a new rom to it?
thanks
I did it and it works alright
thank you
ohhh yey another one beats da death screen lol ,,,,,share your knowlegde
well as you said I went into the bootloader mode.
got the love rom from somewhere around here
flashed it(the installation is in Itlain I think which was somehow wierd )amd that is nowI have the love rom.
I'm currently at work so I only have vista around here.
when I'll get home I try to reflash the wm 6.1 rom again.
Thanks for the help
ok so before flashing ,1st run softspl thn flash ,well thats what i do cos if i dont it always fail.ok so wen you run softspl wait till the screen turns white then run ruu and flash ya wizard dude,btw whr do you work what country
yeahh that what I did.
I think what messed it up was that I tried to install ahh let's say unauthorized hebrew package(I'm from Israel) and after it messed it up I searshed the net and found that it can cause things like that.
I work in a start up company. we develop SW
ok sure dude me in south africa ,ya and try using xp like you said ,hope now you know how to bring the dead to life lol keep up the flashing ,WORK AT MWEB ISP OF SOUTH AFRICA
OH ANYWAY WHEN YOU KNOW ABOUT SOME NEW STUFF FOR THE WIZARD HIT ME ON MY [email protected]
oh and i think you should also change the post name,under advance
but how can I know what is safe for me?
I mean-I already know for sure I have a G4 device(I used the wizard service tool ).but how do I know if I have cid unlock or not?and how do I know what method to use?(i.e. soft/hard)?
And also I wanted to ask if you can recommend on a good rom for me?
oops double post...sorry
ok as you can see me also anewbie i only use g4 safe roms ,also got a g4 device ,if you can use more than one operator on your device its unlocked ---cell operator,,,i neva go for hardspl just soft not sure what the results are for hardspl ---so i keep clear for now ,will investigate and get bck to u,,,,the rom that i like the most is WIZFLO it got the diamond touch interface and a cool photo zooming thing ,lot off apps preinstalled another rom is slim diamond project also cool rom