Hi there,
I just discovered the AutoKeyLock program and immediately hit the problem with "Cannot hook the keyboard".
So I renamed my VitoCopyPaste.exe to .eze and rebooted.
This allowed AutoKeyLock to work.
Just out of interest, I renamed VitoCopyPaste back to .exe and it ran fine. So that suggests to me that both applications can co-exist as long as AutoKeyLock is started first.
So, 65000$ question, is there any way to control the startup order?
BTW I'm running Dr. Gonzo's WM 6.1 ROM on my Vox if that makes a difference?
TIA,
Richard
You can't use both apps on your vox, you must choose one or the other.
Sorry.
That's not true! I have them both working when I automatically start AutoScreenLock and manually start copy/paste.
I can see them both in task manager, Honestly!
If I knew how to take a screen shot, I'd post it.
R.
No, if autokeylock is launched first (screensaver active), vito copypaste don't work, if vito copypaste is launched first, autokeylock don't work.
It's a fact, only one soft can hook the keyboard.
Bye.
I am using "SmartToolkit 1.0.0.RC08" for: autokeylock, copy/paste and key mapping, ( "celle task" is mapped on center d-pad button).
OK Here's a screenshot from my phone showing both apps running:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now do you believe me?
R
dicko99 said:
OK Here's a screenshot from my phone showing both apps running:
<snip picture>
Now do you believe me?
R
Click to expand...
Click to collapse
Believe you, yes that you can run both binaries at the same time.
The $65,001 question (which is what Fireburned is trying to say), is if both applications actually function when running together?
Running the two apps is ofcourse possible, but the beauty is they wont work simultaneousely . Its very simple, how can two apps lock the same hardware device? Think about it. You are using a dialup modem and are already connected to some network through it, now you start and another dialer and again want to use the same modem to dialup some other network, is it possible ?
Yes, they both work.
Shaunak.it, I don't know too much about Windows Mobile but in other OS's you have the concept of chaining where several programs can register an interest in a particular interrupt or device.
Thinking about it, WM must support something similar, otherwise how does the screenshot program see the * key pressed whilst both AutoKeyLock & Vito Copy & Paste are running?
Returning to my original question, is there any way to control the order that programs are started at boot time?
R.
dicko99 : I don't believe you, sorry
Phrak and shaunak.it : Thanks you, it's what i want to say, both applications can run simultany, but only the first launched app works.
Bye.
dicko99 said:
Yes, they both work.
Shaunak.it, I don't know too much about Windows Mobile but in other OS's you have the concept of chaining where several programs can register an interest in a particular interrupt or device.
Thinking about it, WM must support something similar, otherwise how does the screenshot program see the * key pressed whilst both AutoKeyLock & Vito Copy & Paste are running?
Returning to my original question, is there any way to control the order that programs are started at boot time?
R.
Click to expand...
Click to collapse
Yeah! the other program will get access to the device only after the first service let go of it's hold
Video proof
Enjoy!
try to make an sms text message and use vitocopypaste to select some words and cut/paste it somewhere else.
you will notice it doesn't work, because a carriage return is automatically inserted when keylock releases the hook to vitocopypaste.
B****r! I only tested copy/paste on a single line field...
Bye bye AutoKeyLock then!
R.
That's an old problem (not limited to the VOX) - long solved as well. Install Mobiion HookManager (free for personal use):
http://www.mobiion.com/downloads.html#hookmgr
Woo! It really works.
Thanks for the info.
R.
yes indeed!!!
great find
Related
[Please note these pics are photoshopped! This is not what the real plugin looks like. V]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wm5
so is this a hacked version that gets you the modded layout pictured above?
or is it a photoshop as per this thread?
http://forum.xda-developers.com/viewtopic.php?p=366217#366217
if its real...well done!! nice work..
ok, just answered my own Q...its the standard version, not modded like the picture.
:roll:
Hi People,
I just installed the apps and can confirm it is not the hacked version of the orange homescreen as in the photoshop shots.
Cheers,
Shah
Shah2 said:
Hi People,
I just installed the apps and can confirm it is not the hacked version of the orange homescreen as in the photoshop shots.
Cheers,
Shah
Click to expand...
Click to collapse
urm...yeah...like i said! :roll:
Hehe, sorry bout that, was early in the morning when I read it so misinterpreted the answer your own question bit.
Sorry bout that.
By the way I guess the guy in India didn't understand my idea all that well. but he still nice that he tried.
Cheers,
Shah
I found this file can be modify. (DIL_Cfg_A_Perso_L.dap)
[Start]
[Group],4|Group_5 (4=Group_5=Shortcuts)example: 0=Group_1=Contacts
[Elt],4,0|ActiveSync| (4,0=Group,item;ActiveSync=Menu Display)
[Act],4,0|19|\Windows\Start Menu\Programs\ActiveSync.lnk (Action item link)
[Elt],4,1|Notes|
[Act],4,1|19|\Windows\Start Menu\Programs\Notes.lnk
[Elt],4,2|File Explorer|
[Act],4,2|19|\Windows\Start Menu\Programs\File Explorer.lnk
[Elt],4,3|Calculator|
[Act],4,3|19|\Windows\Start Menu\Programs\Calculator.lnk
[End]
so, is there a way to configure this "Plugin"?
I've tryed everything and I can't change the shortcuts location...
any ideas?
...I've also looked at the icons included in the DIL_APP directory and I found one with a camera, but I can't seem to find a way to activate it.
Is there any way to make this happen?
Thanks in advance!
the only thing I have configured is the program links, havent figured out how to change the internet links.
This is my change for T-Chinese.
[Start]
[Group],0|Group_1
[Elt],0,0|聯絡人|
[Act],0,0|1|
[Elt],0,1|新增聯絡人|
[Act],0,1|2|
[Elt],0,2|電話|
[Act],0,2|19|\Windows\cprog.exe
[Group],1|Group_2
[Elt],1,0|電話記錄|
[Act],1,0|3|
[Elt],1,1|未接來電|
[Act],1,1|4|
[Elt],1,2|撥入電話|
[Act],1,2|5|
[Elt],1,3|撥出電話|
[Act],1,3|6|
[Group],2|Group_3
[Elt],2,0|發送 SMS|
[Act],2,0|12|
[Elt],2,1|未讀取 SMS|
[Act],2,1|8|
[Elt],2,2|未讀取 MMS|
[Act],2,2|9|
[Group],3|Group_4
[Elt],3,0|今天|
[Act],3,0|13|
[Elt],3,1|新增約會|
[Act],3,1|14|
[Elt],3,2|設定鬧鐘|
[Act],3,2|21|
[Group],4|Group_5
[Elt],4,0|工作|
[Act],4,0|19|\儲存卡\Windows\Start Menu\Programs\工作.lnk
[Elt],4,1|記事本|
[Act],4,1|19|\儲存卡\Windows\Start Menu\Programs\記事.lnk
[Elt],4,2|mPro商務|
[Act],4,2|19|\儲存卡\Windows\Start Menu\Programs\mPro商務.lnk
[Elt],4,3|檔案總管|
[Act],4,3|19|\儲存卡\Windows\Start Menu\Programs\檔案總管.lnk
[Elt],4,4|相機|
[Act],4,4|15|
[Elt],4,5|圖片與視訊|
[Act],4,5|16|
[Elt],4,6|背景|
[Act],4,6|22|
[Group],5|Group_6
[Elt],5,0|Internet Explorer|
[Act],5,0|19|\儲存卡\Windows\Start Menu\Programs\Internet Explorer.lnk
[Elt],5,1|即時新聞|
[Act],5,1|19|\儲存卡\Windows\Start Menu\Programs\即時新聞.lnk
[End]
But, I don't find how to change URL Link....
Ｐlease tell me how to config the plugin, since there are no option for me to do it.
yeah is there anyway how to config the plugin? ok heres my screenshot
i would like to change the color and font of time
Bump on that...
ditto.
mumu311 said:
wm5
Click to expand...
Click to collapse
why yours have config and others?
unlike mine
chev said:
why yours have config and others?
unlike mine
Click to expand...
Click to collapse
Yours is the real Orange plugin. The other one is Photoshopped. It's just an example.
There is only one option button found on the Camera ICON.
It allows you to switch between Normal or Expert Mode.
You can only change 4 shortcuts under EXPERT mode.
The interface is pretty nice, but too bad, cant launch below bug.
Bug found IN NORMAL MODE:
1. Under the camera tab,
Click TAKE A PICTURE.
The file 'camera' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
Bug found In EXPERT MODE:
1. Under the folder tab,
Click Speed Dial
(The file 'TSPEEDIAL' cannot be openen. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
2.
Addon Bug
Probably a Third Bug
If you remove the plugin, Camera Button no longer recognzed by hardware. cant set anything to it. although camer works fine.
i quite like the interface. too bad, the apps not delicate for O2, missing a lot of functions, therefore, i not using it.
Moreover, i try to read the registry, cant find anything.
lol
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download here... http://rapidshare.com/files/19630568/ipKeyboard.rar.html
Installation steps:
1. Install HappyTappingKeyboard.arm.CAB (to device, not to Storage)
2. Install Default_IM_WM5.CAB (to device, not to Storage; for WM5 only; if u already have other program which can set the default Input Method, skip this step & use that program instead)
3. Extract the files in ip_AC_Skin.zip to your PDA's "\My Documents"
4. Goto the "Option" of HappyTappingKeyboard (Start -> Setting -> Input)
- select "\My Documents\ip_AC_QVGA_P.bmp" for the ";Portrait Bitmap"
- select "\My Documents\ip_AC_QVGA_L.bmp" for the "Landscape Bitmap"
(if your PDA is VGA capable, select the ip_AC_VGA_?.bmp instead, and select the VGA option)
- press "OK" to quit
5. Start -> Program -> IMSelector
- select "Happy Tapping Keyboard" as the default Input Method
6. Soft reset your PDA
7. Enjoy!
Specail Thanks:
- Happy Tapping Keyboard http://d.hatena.ne.jp/KOTETU/00000103
- original skins from http://desftr.blog54.fc2.com/blog-entry-193.html (it's corrected & modified for non-Jp OS)
- Default_IM_WM5 is a modified version of Default_SIP_WM5 (but can't remember where it's from)
A_C
Does this support autocompletion (or autocorrection as the iPhone keyboard software)? If so, in which languages?
The software itself does not support autocompletion, but this functionality is already provided by windows (you get a list with words matching the letters you've typed so far).
I'm also using Happy Tapping Keyboard & have a selection of skins including the iphone. Good application, easy to type with a finger due to it being larger than standard.
Now uploaded to site:
This is fantastic, thanks for your post. So much bigger and easier to use than the default.
Nice !!
Thank you
Where does it come from ? WM6 ?
Finally. A workaround to not being able to skin the WM5 keyboard. Still wish I could skin the default keyboard, tho - but there's never a decert ROM for a device that comes with WM5 by default...
Can someone upload it to 4shared.com, please. Rapidshare is suck.
Thank you!
Just installed it and tested it. Great piece of software. Good bye Resco Keyboard. This make it easier if you want to using your thumb plus it looks great, just like the i-phone. I hope they don't go shut this down too.
Can not get it to load, see it in drop down list, but refuses to activate? Do i need the IM_WM5.CAB? can change between all other choices and Resco Keyboard. Would like to try for one handed smsing. Any help appreciated.
Ixtana_ran said:
Can not get it to load, see it in drop down list, but refuses to activate? Do i need the IM_WM5.CAB? can change between all other choices and Resco Keyboard. Would like to try for one handed smsing. Any help appreciated.
Click to expand...
Click to collapse
Try a soft reset, a friend had the same problem, he tracked it down to a conflict with another keyboard.
If you can't get it working you could try this ;-)
http://dc17.4shared.com/download/1876435/aac93aa2/tengo_thumb_v104.rar?tsid=20070310-160803-a9bc1e1a
Another option is phonepad v1.0, Its the best thing i've used for one handed texting ect. Do a search for it, I remember some long posts over this one.
is there an IMSelector for wm03?
alexanderi said:
Can someone upload it to 4shared.com, please. Rapidshare is suck.
Thank you!
Click to expand...
Click to collapse
Uploaded at
http://www.4shared.com/file/12174842/78a0feb0/ipKeyboard.html
Cheers,
A_C
Ixtana_ran said:
Can not get it to load, see it in drop down list, but refuses to activate? Do i need the IM_WM5.CAB? can change between all other choices and Resco Keyboard. Would like to try for one handed smsing. Any help appreciated.
Click to expand...
Click to collapse
Maybe there is conflict other 3rd party SIP. Pls try to uninstall them.
Cheers,
A_C
jrbaba said:
is there an IMSelector for wm03?
Click to expand...
Click to collapse
I used to be a Palm user since Palm IIIc (do u guys know it?), and my 1st ppc is Asus P535 w/ WM5. So I don't know how to make IMSelector compatible with wm03... sorry.
Cheers,
A_C
Hi there!
How to make it my default keyboard. I tried input options bus since it is in other language i can only see little squares. It works if i choose it from the sip menu down the screen, but after soft reset i loose it as default.
Tks!
Don't even try! I did it using sk tools and it ended with a hard reset...
accents?
Anyone knows how to use accents on that keyboard? (or french keyboard)
Hi,
Can I use it under WM2003SE??? I really2 like it! Thanks
clustered said:
Hi,
Can I use it under WM2003SE??? I really2 like it! Thanks
Click to expand...
Click to collapse
I have it on my Magician & it runs fine. Some people seem to have conflict issues with other keyboard software.
only one way to find out, if you don't like it uninstall it.
Hi!
I have installed Voice Command and all was working great until first soft reset...
Something bad happens to harware button nr 4 (that with a bubble, next to
camera button). All functions mapped to this button are activated only
after holding that button for a few seconds. If you just tab that button -
nothing happens... If I uninstall VC - problem disapears...
I know that this is an old problem (even on WM5 after installing VC), but
I don't find any solution... And I know that there is a solution, becouse on ROMs
when VC is included, that button is working OK...
So dev's or anyone - pls share with me
I have compared 3 registry and files snaps, bout I don't find there
any solution... So if anyone can find what registry change is responsible
for that strange button behaviour, I'll be grateful...
So:
Result1.txt is compare of snaps taken before and after installation of VC
Result2.txt is compare of snaps taken after installation, but before and
after first soft-reset
It is easy to read - all lines starting with < are old values, and lines
starting with > are the modified/new ones...
Thx in advice! This will help not only me - but all the people who are
using VC
I have found an solution for this! OK, maybe this is not real solution
(still needs someone to find what registry change is responsible for this weird
button behaviour), this is more like backdoor for button problem, but it works
Now I have something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It looks great, huh? I don't remenber when I have possibility to map
all the button functions! (I think that in last official WM5 ROM)
OK, You need a registry editor, WM6 without Voice Command (I haven't
tested if this will work, when VC is build into ROM - besides, only with VC from here,
announce for incoming calls will work), Voice Command Fixed for WM6 and
offcourse HTC Universal
Note: This fix will work only if your "Record" button has been messed up
after isntalling VC!
After applying this fix, you will have to possibility to use Record button
as before installing VC, and you will have a new function - other action
mapped to Press & Hold for Record button!
1. Open you registry editor and navigate to: HKLM\Software\Microsoft\Shell\Keys
2. Find key 40C4 and rename it to 40C5
3. Create new key and mane it 40C4
4. Open key 40C5, copy all values from there to 40C4 key
5. Open 40C4 and change value of Name to "Record (Hold)", for example
You Keys key should look as here:
And it is done! Now in Settings -> Button windows all buttons
will be functional as before installing VC, and you have received
a bonus - a new action key to map
PS. I still search for a proper solution, why record button (40C4) has
transformed into 40C5 after isntalling VC! Pls, I know, that many
devs here know WM registry well - pls look at my compare results....
This will help a lot!
Thanks! I've been using KDSkamal's WM6 Beautiful Edition which is nice and fast but, among other minor things, didn't have the Record (Hold) button visible. Using your suggestion I was able to successfully restore and map it.
I tried this, and I get the announcements via handset speaker, but not over BT... Even after changing the configuration settings to use regardless of free time, and to use for BT all of the time and again to use BT if available... I did not have to use the VC BT Fix by Zajules after installing this... and BT worked as before...
We are closer, good work, but how did you get it to work over BT... Once we know that, Microsoft should compensate all that have worked to make this a reality... Just wish I was one of them... Ha...
Thanks Mr. Groch!
I was going to try this registry fix on my Mogul, but I already had 40C5 key, and didn't think I should try to rename another to this one.
Instead, I was able to just reassign the record button using AEButton Plus and it's working fine.
--Andrew
Hi
Is there anybody that could help me add Reboot to the Quicklist. I have a Qtek 8020 (Feeler) with a custom wm6 rom and that has the reboot option. I've tried to add:
[HKEY_CLASSES_ROOT\CLSID\{2ABD8635-9808-4c4c-943B-8173B805FD40}\InProcServer32]
@="HTCquickList.dll"
AND:
[HKEY_CURRENT_USER\Software\Microsoft\QuickApp]
"5"="{B7A5E609-3E46-442d-8D32-65926EDA6795}"
"4"="{69E9215B-91B0-461b-A3B6-165EBA32DAE1}"
"3"="{0D519EC6-315A-4693-AF1B-B2DA865AC1C7}"
"2"="{2ABD8635-9808-4c4c-943B-8173B805FD40}"
"1"="{6D48AB52-635C-4c6a-8508-9D32A0F07863}"
(Number 2 is the reboot option)
and also copied in HTCQuickList.dll to the windows folder. I just get a some squares as option number 2 instead of the word Reboot and it does nothing when I choose option number 2...
Could anyone please lead me in the correct path
Thanks.
Finally
I got it working by searching through the registry on the Feeler. For those of you who would like to know:
You need to add these registry settings:
[HKEY_CLASSES_ROOT\CLSID\{2ABD8635-9808-4c4c-943B-8173B805FD40}\InProcServer32]
@="HTCquickList.dll"
[HKEY_LOCAL_MACHINE\Software\HTC\HTCQuickList\0]
"ResOver"="1050"
"FilePath"="reboot.exe"
"CmdLine"=""
[HKEY_LOCAL_MACHINE\Security\ResOver]
"1050"="Reboot"
And change this one:
[HKEY_CURRENT_USER\Software\Microsoft\QuickApp]
"5"="{B7A5E609-3E46-442d-8D32-65926EDA6795}"
"4"="{69E9215B-91B0-461b-A3B6-165EBA32DAE1}"
"3"="{0D519EC6-315A-4693-AF1B-B2DA865AC1C7}"
"2"="{2ABD8635-9808-4c4c-943B-8173B805FD40}"
"1"="{6D48AB52-635C-4c6a-8508-9D32A0F07863}"
Originally you only have four in
[HKEY_CURRENT_USER\Software\Microsoft\QuickApp] so you will need to change the order. Number two is the reboot option.
After you've done this you need to copy HTCQuickList.dll and reboot.exe to the /windows folder.
Then you have the reboot option in QuickList as option number two
I've attached the two files you need.
Awesome, my friend!
I just love it.
Thanks a lot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've set it to position '3'.
Just a little question: What is the value 'ResOver' and why is it set to '1050'?
The ResOver and 1050 is where the name Reboot is set. You can put whatever you like there....
App Ready
I compiled these files into ready to install application HTC Reboot.
Just install in to the phone and you are safe from the hasle of manually puting files etc.
Installer will ask you for place of installation, whatever you will choose, it will install in phone anyway.
Mancom
Excellent. Installed using your cab and changed the "Reboot" to the German translation in the registry. Works perfect. Well done guys!
very nice..... thanks
can someone give me the same app, but which powers off my device?
Erofich said:
can someone give me the same app, but which powers off my device?
Click to expand...
Click to collapse
Hi Erofich,
You can install the attached modified-file.
Power off has been set into position '1'.
alkaf said:
Hi Erofich,
You can install the attached modified-file.
Power off has been set into position '1'.
Click to expand...
Click to collapse
thank you very much my dear friend but i had need an exe file for assigning to button's shortcut in WM6.1 Pro for HTC StarTrek
btw, Alex[DFR] had already made a small application for me. But if anybody wants to get it, just see attach
alkaf said:
Hi Erofich,
You can install the attached modified-file.
Power off has been set into position '1'.
Click to expand...
Click to collapse
installed this on my vox and now i cant get the quicklist at all
alkaf said:
Hi Erofich,
You can install the attached modified-file.
Power off has been set into position '1'.
Click to expand...
Click to collapse
Will this cab work with any Smartphone with VM6 or just with HTC phones? Some of the soft keys in my old, but reliable Tornado just aren't responding as they once did. So... I just got a Blackjack II for $80 from AT&T while I wait to see what features the next generation HTC Touch Dual or a similar form HTC Smartphone will have. I want a slim form factor HTC Smartphone with Touch Screen, Quad-Band, 3G, WiFi, GPS and with at least a 20-key keypad. In the meantime the BJII will suffice, but I'd like it to have the ability to reboot from the Quicklist as my Tornado still does.
Excelent
What an excellent little app. Thanks a lot...just what I've been looking for. :thumbsup:
I was happy to find it too, but unfortunately it doesn't seem to work on my TD2.
I installed the cab, checked all the registry entries and the presence of the DLL and the EXE in the Windows directory. Everything seems to be correct.
But I still have only 4 options in Quicklist, Reboot not included. It's a German WindowsMobile - could that be the problem?
hi guys. i was wondering if this reboot option can be done for my HTC Touch2 running wm 6.5? i have attached a screenshot of the quick list on it..hopefully someone can help me.
alkaf said:
Hi Erofich,
You can install the attached modified-file.
Power off has been set into position '1'.
Click to expand...
Click to collapse
Thanks, it does work also on Samsung B7330 OmniaPro.
HTCMAG_ROM_WWE_O4
ROM for HTC Magician.
Release date: 16.08.2009 13:03 GMT+3
Alternate name: 3.04 WWE.
Based on "Generation 9"
64 MB DEVICES SUPPORTED BY THIS ROM
Come soon:
Code:
HTCMAG_ROM_CHS_O2
HTCMAG_ROM_RUS_O2
All roms will have the almost same set of applications, features and etc.
And almost same bugs of course.
Changes:
*BatClear application excluded. It's now obsolete.
*Chord keys support:
Enter + Calendar -> Calibration
Enter + Contacts -> WirelessMgr
Enter + Record -> DeviceSpeed
So you can execute this functions by two buttons. Very easy.
*Ability to turn off device fully.
*Press and hold power key functionality: softreset, screenshot or fulloff
Configured in registry, no UI for it in "Generaion 9".
*Different USB charging modes: none, slow-100ma and fast-500ma.
Configured in registry, no UI for it in "Generaion 9".
*USBtoPC unchecked box mode is working now.
*Unattended mode now working.
*BTDUN profile now working.
*AutoInstall application included. Allow you to setup your favorite
settings/program from script file after hard reset.
Read more about it here
*AudioBooster application.
*Equalizer application included. Bass and treble settings. AGC settings also moved in this application.
*Slightly improved touch sensitivity
*No camera in ROM. And no way to use camera at all.
*Speaker On button now working in cprog application.
*All old BT stuffs removed, including old AGW and BTSettings. You need create your own BT ports in settings for your GPS. Russian people have not any problems with it, so it should work
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
You can donwload it from my website.
http://cotulla.pp.ru/
Please don't reupload to other places.
-Cotulla
沙发！！！！！！！ hahaha~~~~
板凳bench
downloading “HTCMAG_ROM_WWE_O4"
Now i am waiting for the chs one.
Thx Cotulla.
‘
Thank you all for the 818 pay! Thank you very much!
STOP downloading. 10 seconds ago I found critical bug in O4. will reupload 10 minuts ago
Special thanks to Cotulla It had been come Just download now . and waiting for the CHS release
先暂停下载啊各位…………
Hi to all....
Does anyone tried to flashed this ROM on VIsta?
Or this ROM is intended for XP only?
Rhonald said:
Hi to all....
Does anyone tried to flashed this ROM on VIsta?
Or this ROM is intended for XP only?
Click to expand...
Click to collapse
Install ActiveSync First,or pickup its driver.
So is the one we can download at the moment stabile? No bug anymore? I just finished downloading but as I read Cotulla's last message here, I hesitate to flash my device. Any suggest?
DONE. reuploaded. please downloaded again.
xiaojin1985 said:
Install ActiveSync First,or pickup its driver.
Click to expand...
Click to collapse
Driver for what?
no, only Windows XP flashing. Vista not supported!
How about using the ’Windows mobile device center‘ on vista or WIn2008？
You're a great man Cotulla, I can't find enough words to thank you.
thanks for your sharing,,,,I only say this one...
bad english..hehe...
I'm still perfect the crystal-like style,so I make this theme.
hey cotulla
I am using 3.03 at the moment but gps through a bluetooth reciever is not working for me (using tomtom), it used to work in winMo2003SE by selecting com5 through bluetooth reciever in tomtom.
is there a fix for this or am I doing something wrong and will updating to this version allow me to use gps
EDIT: after a bit of searching I managed to get it to anyone with the same problem go to here http://forum.xda-developers.com/showthread.php?t=499983
softkeys
GR8 rom Cotulla!!!!
i hav 1 problem, i use esmertech jbed 2 run a chat java app. but now i am unable to use the program because i need softkeys 2 log in?is there a way to use the softkeys? or is there another java midlet manager i could use that would allow me to use the touch screen for the softkeys?
o did i mention your roms rock!!!!! brought my magician back 2 life!