Related
Hi,
ok I'm a lil bit desperate right now
I got my XDA II mini today and saw an update on the o2 site and started installing it .. only to notice that it was for the XDA II and not the mini. So, this thing killed my boot rom. I then found your guys site and installed GER_11201_150_11210 RUU package which went fine ... but well, that thing is for T-Mobile and I don't want my xda to be pink
So, I was looking through the forums to see how I can get my original image as I couldn't find an O2 RUU package. So, I tried the ntrw.exe write to SD card (512MB) thing. Inserted it in my xda, did a soft reset and then a hard reset. In the display serial shows up... but I never get it to ask me Press Power to Flash ...
so a) what am I doing wrong an b) how do I get the german o2 image back on my xda?
thanks
ok I understand now why the SDCard update doesn't work .. because I didn't have a chance to backup my boot rom :/
Where can I get a GER o2 boot rom installer that works on my device?
alright, I installed the 1.12 WWE exe package with the help of MaUpgradeUt_noID.exe
... copied the existing boot rom to sd card, and extracted it from there. Overwrote the first 416 bytes in O2_GER_1.12.01_big_storage.nb1 with those of the extracted image.
Now, it's flashing with the SD card ... I'm confident that it'll work, we'll see
ok, the flashing worked ... but O2_GER_1.12.01_big_storage.nb1 is not really O2???
So, where do I get the real o2 boot image?
As much as i know it´s included in the ExtRom....
You can install it manually.
Don´t know who, but someone uploaded "Promasters Autoinstaller 1.5.zip" to the ftp. Very nice application. I would suggest you try/use it. There is an Option to change the bootlogo...
Regards
Stefan
you have to install the extended rom manually!
check the ftp
Hello!
I had been using Helmi_UNI_AKU3.5_v1.3 for a while, today i tried to flash WM6_TrueNeytral rom and now my pda is dead. Before that i enabled the RAPI using the enableRapi cab, as my pc kept on saying that "Cannot copy files". But after enabling rapi, i tried again and i was flashing WM6_TrueNeytral rom, half way thru flash(after creation of partition's), i got some error message [some lame win error- i am using win xp xp2). And now my PDA is not working.
I had a some prob before when i had tried to upgrade Phorpeth IVVV, but i used HELMI rom to repair and overcome the problem...
Please tell me an GENRIC version of ROM which i can use to repair it.
Regards,
admin22
admin22 said:
Hello!
I had been using Helmi_UNI_AKU3.5_v1.3 for a while, today i tried to flash WM6_TrueNeytral rom and now my pda is dead. Before that i enabled the RAPI using the enableRapi cab, as my pc kept on saying that "Cannot copy files". But after enabling rapi, i tried again and i was flashing WM6_TrueNeytral rom, half way thru flash(after creation of partition's), i got some error message [some lame win error- i am using win xp xp2). And now my PDA is not working.
I had a some prob before when i had tried to upgrade Phorpeth IVVV, but i used HELMI rom to repair and overcome the problem...
Please tell me an GENRIC version of ROM which i can use to repair it.
Regards,
admin22
Click to expand...
Click to collapse
I would suggest restoring your Doc table with MTTY, then upgrade your BootLoader version if you have not done this allready and re-flash the rom of your choice.
?
admin22 said:
Hello!
I had been using Helmi_UNI_AKU3.5_v1.3 for a while, today i tried to flash WM6_TrueNeytral rom and now my pda is dead. Before that i enabled the RAPI using the enableRapi cab, as my pc kept on saying that "Cannot copy files". But after enabling rapi, i tried again and i was flashing WM6_TrueNeytral rom, half way thru flash(after creation of partition's), i got some error message [some lame win error- i am using win xp xp2). And now my PDA is not working.
I had a some prob before when i had tried to upgrade Phorpeth IVVV, but i used HELMI rom to repair and overcome the problem...
Please tell me an GENRIC version of ROM which i can use to repair it.
Regards,
admin22
Click to expand...
Click to collapse
I think you are on the wrong forum.
universal is NOT the name of universal rom versions for all ppc's, but rather one particulair kind of ppc.
greetings,
Wout
thanks
Hello beast0898 & wout,
Thanks for letting me know what to do next.
I will be doing the needful, and try to get it to work.
It was really helpful.
Mods : If incase this is the wrong forum, please move the thread to the appropriate forum and please pm me sub forum where it is moved. Thanks.
Regards,
admin22
bootolader state working?
Hello,
It has been like 3 days, i am an NDE and dont have time to update it. Hectic work.
Well yes the boot loader mode can be seen. It display's
USB or SERIAL
V 1.0
Hello,
Could someone please help me out?
with this issue? It has been like five days.
Regards,
Hello, Beast
Thanks for all the help.
I could recover the PDA yesterday using the method u suggested.
I was doing something wrong before so could not find the USB port, later i browsed all the posts to get it and did the required thing. Please close the post.
KISSES.
Hehe, u made me that happy!
Regards,
admin22 said:
Hello,
Could someone please help me out?
with this issue? It has been like five days.
Regards,
Click to expand...
Click to collapse
Have you tried installing one of JWright's ROM's?
Also, I have never heard of any of the ROM's that you are trying - I do know that you are using a Universal (since its called the PU10), so thats not the issue.
Additionally, try a different computer and cable - they may be causing the problems
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have youtried with a previous Tomal ROM?
It worked for me in a similar problem
Good luck
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have you removed your SIM and SD card, before trying to re-flash?
I did
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Pls anybody help me too! same problem stuck up and updating stops at 7%
giving ce rom update error?
Do a hard reset first and clear the phone by pressing 0 when promted
report back
kotabunga said:
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
Click to expand...
Click to collapse
Try to flash each part one at a time, not all of them at the same time.
Note that this ROM do not work with some extended rom and that blank page at first was the reason of that. Flash your extended rom with the tomal's own extended rom. You can find it...(oh no it has been removed, I will try to upload it for you). After flashing the extended rom try ato re-flash the rom and at last try to re-flash the radio (If you need it). Beware that flashing extended rom will erase your own extended rom so try to find one and decode its files to have your customization files back...
Hope it works
I have problem uploading file try to search for "Tomal_extrom" yourself and I will try to upload it...
Tried to flash Tomals ext ROM...but wont work too....I'm hopeless, maybe I should say goodbye to my uni,.....
same
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
digitalir said:
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
Click to expand...
Click to collapse
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
pls give the action step by step, im very hopeless
tomal said:
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
Click to expand...
Click to collapse
pls can u tell me the process to do it?
thnks
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
ultravox said:
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
Click to expand...
Click to collapse
mtty do not format radio rom, so you don't need to re-flash it.
No progress
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
AS means active synchronize. Disable USB connection in AS. It has been written there bro...
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
my friend,
active sync AS
ok
well i am just back on my chair so looking forward to do it right away
will keep u posted
tried ! but in vain!
yes i have already gone through the wikipage and tried it but after typing the command it just says its invalid command.
i have tried all the ways i can with mtty given in wikipage with no results positive.
pls can anybody suggest the commands for doc format
again thnks
hey!
after much gogling i got mtty1.16 and tried but it does not show the usb port.
so again googling does it support usb 2.0
i think it doesnt.
ok i will try on my old laptop with usb 1.1 tonight at home.
Tomal 1st thnks for ur help and valuable time
can u pls give the details for properly formatting the doc [pls.
any luck ? I dont....my uni still dead...tried with usb 1...no luck...
as mentioned in the tittle how do i do that
btw i'm using XDA ATOM
if you already hard-spl'd your device, you will need to download a WM5 rom MATCHING YOUR DEVICE and flash it.
but it didn't change...
i'm using WM6.1 byJaime Mendez
i juts seem to can't downgrade it...
can u tell me the steps?
maybe if you explained what you were doing.. i'd be able to tell you what you're doing wrong.. or what's generally wrong
ok then...
i pressed the camera+soft reset key and then i plugged in my USB (as usual)
connected to PC, dsuu then it will says pls dsuu in OS Mode first something like that...
will that hlp u on more info?
Hi!
I have an O2 XDA EXEC. I upgraded its RAM to 128MB. While using Tomal's ROM, as per the advise I Doc Formatted the device using the following commands in MTTY:
USB>task 32
USB>task 28 55aa
After the command the things worked fine and I was able to successfully install the Tomal ROM. After a couple of days I wanted to downgrade to WM5 and I used the original O2 XDA EXEC WM5. The strange thing that happened was that though the installation was successful yet after the O2 splash screen a white screen appeared making it impossible to align the screen as it is required by Windows at startup.
I tried a couple of other WM5 versions but the result remains the same. I'll appreciate some advise in this respect so that I may be able to install any of the WM5 version available on my O2 XDA EXEC.
Regards,
Haque
Going back from tomal to wm5 i had to doc reformat: task 28 55aa
Haque said:
Hi!
I have an O2 XDA EXEC. I upgraded its RAM to 128MB. While using Tomal's ROM, as per the advise I Doc Formatted the device using the following commands in MTTY:
USB>task 32
USB>task 28 55aa
After the command the things worked fine and I was able to successfully install the Tomal ROM. After a couple of days I wanted to downgrade to WM5 and I used the original O2 XDA EXEC WM5. The strange thing that happened was that though the installation was successful yet after the O2 splash screen a white screen appeared making it impossible to align the screen as it is required by Windows at startup.
I tried a couple of other WM5 versions but the result remains the same. I'll appreciate some advise in this respect so that I may be able to install any of the WM5 version available on my O2 XDA EXEC.
Regards,
Haque
Click to expand...
Click to collapse
I'm sorry, but none known WM5 is working with 128MB uni's.