Database Info

How to use nb1 file to upgrade ROM

anyone can give me a hint, how to upgrade ROM using nb1 file. I did sucessfully upgrade using shipped ROM in FTP folder may times, but now i want to upgrade into CHS rom. unfortunatelly FTp folder does not have CHS ROM.
I read all articles regarding BigStorage upgrade, but so far no success. As far as i know upgrading using bigstorage, i have to use the same ROM version installed in the PDA ? am i right ?
thanks

Krome Spy Rom Upgradation Error
robertus1971 said:
anyone can give me a hint, how to upgrade ROM using nb1 file. I did sucessfully upgrade using shipped ROM in FTP folder may times, but now i want to upgrade into CHS rom. unfortunatelly FTp folder does not have CHS ROM.
I read all articles regarding BigStorage upgrade, but so far no success. As far as i know upgrading using bigstorage, i have to use the same ROM version installed in the PDA ? am i right ?
thanks
Click to expand...
Click to collapse
,
I need a little help from your side. I am using a Krome Spy PM10B Windows Mobile. In a curiocity i have worngly upgraded my rom from this site http://forum.xda-developers.com/archive/index.php/t-230279.html . After that i could not able switch on my phone. No display is comming out. Instead, it is showing "SERIAL" at top of the screen & "v 1. 02" at the bottom of the screen when connected via a charger. When connected through activesync, "USB" is showing in place of "SERIAL", but activesync could not detect my ppc.
Kindly advice me how to rollback to my original rom position so that i can operate it properly.. Plz help

bkpdp said:
When connected through activesync, "USB" is showing in place of "SERIAL", but activesync could not detect my ppc.
Kindly advice me how to rollback to my original rom position so that i can operate it properly.. Plz help
Click to expand...
Click to collapse
You're stucked in bootloader mode.
Upgrade your ROM and it should work again!
Activesync is not the problem, you made something really stupid upgrading to a non-working ROM... Like using rocket fuel in your car... You can do it, but it's stupid because it may kill you and the car...
Just download the CORRECT ROM for your device (that's so easy!) and install it on your device.
0. Download a VALID ROM
1. Plug the device, SERIAL V1.xx -> USB (screen of device)
2. Run the ROM updater on the PC
3. Wait... don't unplug!
4. After some checks, it shall boot again like a new one

Krome Spy Rom Upgradation Error
b0ris747 said:
You're stucked in bootloader mode.
Upgrade your ROM and it should work again!
Activesync is not the problem, you made something really stupid upgrading to a non-working ROM... Like using rocket fuel in your car... You can do it, but it's stupid because it may kill you and the car...
Just download the CORRECT ROM for your device (that's so easy!) and install it on your device.
0. Download a VALID ROM
1. Plug the device, SERIAL V1.xx -> USB (screen of device)
2. Run the ROM updater on the PC
3. Wait... don't unplug!
4. After some checks, it shall boot again like a new one
Click to expand...
Click to collapse
Hello sir,
Really a grate thanks for your reply. Whenever i plug the device i comming to bootloader mode. Can you suggest me please where to get the valid rom for my Krome Spy. I ahve googled for it, but found lots of confusion in choosing the right one. Please help...

http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
A lots of official ROMS here
And try to have FULL CHARGED BATTERY!

please help i beg you!!!

i JUST BOUGHT A NEW O2 EXEC, AND TRIED MY BEST TO UNLOCK cid AND SIM, O2 APPARENTLY SHIP THEM UNLOCKED, SO I TRIED AND IT WAS. TRIED TO cid UNLOCK BUT NO LUCK KEPT GIVING ERRORS. SO I BEGUN THE INSTALL CROSSBOW LATEST, AND IT THEN WAS STUCK ON O2 SPLASH SCREEN, TRIED TO REFLASH WITH THINGONASTRING, NOW ITS STUCK ON BOOTLOADER, SAYING V2.01 AT BOTTOM AND SERIAL OR USB (WHEN CONNECTED), I HAVE LOOKED AND TRIED ALL OPTIONS, I TRIED UNI_EXTBOOTLOADER, AND THE OTHER ONE WHEN I WAS STUCK IN SPLASH SCREEN. NOTHING IS WORKING, THEN I TRIED TO SEE IF I COULD INSTALL OFF CD WITH O2 EXEC, BUT CANNOT FIND RUU. THE ONLY WAY I CAN NOW GET INTO BOOTLOADER IS FIRAT ATTACHING THE USB CABLE THEN BOOTLOADING, I CANNOT DO IT WIHOUT USB CONNECTED, BUT IF I TOOK THE USB OUT AFTER I HAVE GOT IT INTO BOOTLOADER, IT STILL STAYS ON. WHEN I ALSO PRESS THE RESET WHILST USB CONNECTED, THE LIGHT ON O2 EXEC FLASHES RED EACH TIME PRESSED?
ANY HELP WOULD BE GRATEFULL.... COULD THIS BE VISTA??? AS THATS THE OS I USE.

Please help, this is supposed to be a christmas present... i just couldn't help myself!!!!

vistar said:
Please help, this is supposed to be a christmas present... i just couldn't help myself!!!!
Click to expand...
Click to collapse
Hi vistar,
Hopefully, you will have it sorted out by Christmas!
Yes, it is Vista problem and you need to change the USB Vista driver in your PC to XP driver.
I don't mean changing the Windows Mobile Device Center to Active Sync 4.5!
But the USB drivers. Look here:
http://forum.xda-developers.com/showthread.php?t=313001
http://forum.xda-developers.com/showthread.php?t=291723
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I believe that the first post should solve your problem. If not try the others. Basically, in Device Manager of your PC, the USB driver should be the old XP driver dated 2004!
Any other year won't do you good!
Merry Christmas!
Happy New Year!
KOR!

It is highly recommended NOT to use Vista ... even with the proposed driver patch.
I have developed a Radio ROM issue because of this: http://forum.xda-developers.com/showthread.php?t=347375
If you are using Vista, it is highly recommended for you to use Virtualisation and install XP.
I have been using XP under VMware forever without problems as far as flashing my Qtek is concerned ... until my Vista mis-adventure that is. I know that VMWare is not free, but you may want to give http://www.microsoft.com/windows/products/winfamily/virtualpc/default.mspx a try.

I flash my two Universal at least once a day under Vista with no problems at all.
Flashing Radio, CE ROM and ExtROM with Vista hasn't created any problem for me.
Vista like XP automatically install latest update from Microsoft site, this update also includes drivers too.
Just before flashing make sure that your old 2004 driver is not changed to the latest 2006 or 2007 driver!
That's all folks,
KOR!

will try the threads above thanks, i have tried in vista, and also i use vmware too, with xp pro spâ. which seems to work better but get error ăđă, radio update error, i think i have wiped the radio??? as when the first screen comes up it says:
from,
Radio:
EXT Rom:
Bla bla:
to:
Radio: 2.?.??
EXT Rom: 2.2.??
Bla bla: 2.2.??
I cant remember what numbers came up, but it was blank at top and version numbers at bottom.
any help would be grateful

ok i got it to work , through vmware, i ran PsiDOC_WM5_20041_Taster, which worked think its WM̀ still but its back on, I want WM̉ though, i'll try again.. some advice wouldn't go a miss. thanks.
Note: If anyone has problems blame vista..... Good OS, Bad PDA Partner...

ok every rom i try fails with the following: Error 114, Radio Rom Upgrade error.
why is this??? i have looked through the wiki and forum, people have had this problem before, but no answers.
I have this when WM5 loads up,
1.09.00
42.42.p8
2.00.41 WWE
and bootloader v2.01 (G4)
just incase this info is needed.
thanks, i will leave it on WM5 till an answer is given, preferably before christmas...lol.
thanks guys for at least helping me.

vistar said:
thanks, i will leave it on WM5 till an answer is given, preferably before christmas...lol.
thanks guys for at least helping me.
Click to expand...
Click to collapse
If you have tried all the links I have given, you could have easily upgraded the ROM to Windows Mobile 6.
Read carefully, my above post #3.
Did you know that you could just flash the CE ROM (Main ROM), if the Radio is not flashing.
KOR!

KOR support center !!!

How do i Flash that alone? do i just remove the radio file from the WM6 folder and run RUU again??? just to confirm...
Thanks M8 much appreciated.

vistar said:
How do i Flash that alone? do i just remove the radio file from the WM6 folder and run RUU again??? just to confirm...
Thanks M8 much appreciated.
Click to expand...
Click to collapse
Read the four links, I have given you.
1. nk.nbf (CE ROM - Main ROM)
2. ms_.nbf (Extended ROM - Storage ROM)
3. radio_.nbf (Radio ROM)
If the ROM is in .exe format, than excute the ROM without hooking your universal to the PC. In the temporary folder, you will find all the files.
Read,
KOR!

sorry what i meant was how do i flash the files to the device??? i have all the files ready..
do i remove radio from folder then execute RRU? or do i use a different way?

Thanks for your support KOR!!!
the later worked perfectly on my G4 device, i ran the update without the device attached, put into bootloader, and found all files in temp directory, then removed the radio file. connected the bootloaded device, then ran the update, it worked straight away, only in xp/vmware though.
Thankyou..... I really mean that KOR..

vistar said:
Thanks for your support KOR!!!
the later worked perfectly on my G4 device, i ran the update without the device attached, put into bootloader, and found all files in temp directory, then removed the radio file. connected the bootloaded device, then ran the update, it worked straight away, only in xp/vmware though.
Thankyou..... I really mean that KOR..
Click to expand...
Click to collapse
Hi Vistar,
You are welcome. If you download the drivers from the first link in post #3, then you can use Vista without any problems to flash your device.
Just make sure that the driver is dated 2004 before flashing the device. Check the driver for the Portable Devices ->USB Disk in the Device Manager of your PC.
Best Regards,
KOR!
BTW, I did reply to your PM.

King of Rapture™ said:
I flash my two Universal at least once a day under Vista with no problems at all.
Flashing Radio, CE ROM and ExtROM with Vista hasn't created any problem for me.
Vista like XP automatically install latest update from Microsoft site, this update also includes drivers too.
Just before flashing make sure that your old 2004 driver is not changed to the latest 2006 or 2007 driver!
That's all folks,
KOR!
Click to expand...
Click to collapse
Perhaps that's because both your Unis are G3 - and mine is a G4.

HTC Tytn II recover from bad flash

Hi.
I have not posted much on this site, yet I have used it plenty of times. And first off I have to say "Thank you oh so very much" to everybody who frequent this site. Most of all I would like to thank the developers and rest of the crew that helps users on a daily basis.
I've had plenty of phones the last few years: 9090, 9100, Tytn and now Tytn II - all of which have been flashed - successfully I might add - with software and aid from you guys. (Ok, so my Tytn nearly ended up as a paperweight, but with some fancy maneuvers using the CE SDK from Microsoft I was able to use it as a PDA again)
Now, I am stuck. Really stuck. (Not saying I'm not to blame, but I am still stuck)
I've got a Tytn II (The P4550 HTC Kaiser 120 I believe). A few weeks back I flashed this with Alex's Home ROM (http://wiki.xda-developers.com/index.php?pagename=Alex's ROMs). At the time I was running Radio 1.27.12.11, and continued to use it after the Alex flash.
That worked perfectly.
But being interested in always trying new stuff I yesterday decided to flash Alex.v5.WM61.HTC.302.UltraClean.ROM.beta2. And it really went bad.
I studied up on many postings (obviously not enough) and started the process:
#1: Hooked up the pda to my computer
#2: HardSPL v1
#3: Tri-Color mode and activesync grey
#4: Started the upgrade with KaiserCustomRUU.exe
Everything went smoothly until it hit 99% - there it stuck and the program ended with a communication error. My computer runs Vista (yes, I know. I wont even consider flashing another phone using Vista), but it has worked flawlessly 25-30 times before.
Anyways, what happened when I tried to recover was that the phone went into tri-color mode. Needless to say it was unable to recover. After much back and forth I reinstalled an old laptop with XP (as mtty does not work on Vista) and was able to boot it back in to the OS using a walk trough from this site - cudos to Laurentius26 for the post)
Anyways - it came back. But since it failed the flash I tried it again to make sure it finished properly. What I did was flash back the Alex Home ROM I had in the first place - that worked. Then I flashed back the 1.27.12.11 Radio ROM - which failed - seriously.
It hung on 17% and when reset it would only boot to tri-color. And this is where I am now.
Every time the phone resets it boots to tri-color. I've done and redone the mtty (with and without the task 28), but it stops in tri-color mode. If I at that point hook it up to mtty and issue the boot command it will boot properly, but thats kinda annoying - having to carry with me a XP laptop for each time I have to reset the phone. (Ive also tried the set 14 0 when the phone is in this state, but it will still only boot to tri-color)
So - what now?
I've tried flashing the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship, but it stops with 294 - invalid vendor id. I've tried flashing the same ROM with HardSPL installed - no vender id error but it fails at 16%.
In desperation I've tried HTC_Kaiser_NL_ROM_1.56.404.6_Radio_22.45.88.07_1.27.12.17_Ship, but this also fails at 16%.
I've studied many a post on this site, but have so far been unable to recover from this error.
Is there any hope of regain the much needed functionality of normal booting?
Hopefully there is.
Thanks in advance.

Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo

Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Most definetly.
These were also posted by e-men in another topic this morning so I am currently installing Windows XP on a computer at work to try this.
Will report back.

Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?

Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
ulfthomas said:
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Click to expand...
Click to collapse

WM6.0 and WM6.1 radio's are different, they are not compatible!
So be carefull which radio version you are flashing
Info about radio versions:
http://forum.xda-developers.com/showthread.php?t=349375
Cheers,

Laurentius26 said:
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
Click to expand...
Click to collapse
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?

This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
ulfthomas said:
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
Click to expand...
Click to collapse

Laurentius26 said:
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
Click to expand...
Click to collapse
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?

Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
ulfthomas said:
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Click to expand...
Click to collapse

Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
And all good tips Leo.
OS: Windows XP SP2. Freshly installed. Only Activesync 4.5 added.
HTC: Is orignial. Patched a few times using HardSPL
Original rom: As mentioned above I've tried a couple of them, but both ending in invalid vender id.
And no usb hub present.
Another comment - the flashing done today and yesterday has been done from two different xp computers - but with same result.

Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.

I'm going to upload a shipped ROM for you, this one if you didn't try it yet?
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Another question... did you use Custom RUU with ROM update?
http://forum.xda-developers.com/showthread.php?t=334890
ulfthomas said:
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
Click to expand...
Click to collapse

Yup - that one has been tested - fails with invalid vender id.
Also tried flashing that rom with HardSPL - comm. error.
And no, I have not tried the Custom RUU. Will for sure try that now.

The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?

Yes... try with another shipped ROM please?
ulfthomas said:
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Click to expand...
Click to collapse

Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.

Use one more time MTTY, clear all FATS and I've send you a PM.
ulfthomas said:
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Click to expand...
Click to collapse

If you're getting an invalid vendor id it sounds like your hardspl or superCID isn't working correctly. Before going any further it's probably best to go to your bootloader screen and check that hardspl is still installed.
After that, I'd try flashing from the SD card.

Good point ach2, but when launching HardSPL and starting the update it lists the correct data on the bootscreen (Jumpspl or something equivavlent to that)
Leo: Looking around xda I found an article about dumping the ROM from another device. In the same thread I found a link to dumped original ROM. I patched that and it worked like a charm.
My PDA came back to its original state.
After arriving home just now I thought I would give your ROM another go, but same result - stuck at 16% (With HardSPL and Custom RUU)
What can cause this?

Help My Uni Stuck

After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!

kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have youtried with a previous Tomal ROM?
It worked for me in a similar problem
Good luck

kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have you removed your SIM and SD card, before trying to re-flash?

I did
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?

kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Pls anybody help me too! same problem stuck up and updating stops at 7%
giving ce rom update error?

Do a hard reset first and clear the phone by pressing 0 when promted
report back

kotabunga said:
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
Click to expand...
Click to collapse
Try to flash each part one at a time, not all of them at the same time.
Note that this ROM do not work with some extended rom and that blank page at first was the reason of that. Flash your extended rom with the tomal's own extended rom. You can find it...(oh no it has been removed, I will try to upload it for you). After flashing the extended rom try ato re-flash the rom and at last try to re-flash the radio (If you need it). Beware that flashing extended rom will erase your own extended rom so try to find one and decode its files to have your customization files back...
Hope it works
I have problem uploading file try to search for "Tomal_extrom" yourself and I will try to upload it...

Tried to flash Tomals ext ROM...but wont work too....I'm hopeless, maybe I should say goodbye to my uni,.....

same
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys

digitalir said:
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
Click to expand...
Click to collapse
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!

pls give the action step by step, im very hopeless

tomal said:
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
Click to expand...
Click to collapse
pls can u tell me the process to do it?
thnks

the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers

ultravox said:
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
Click to expand...
Click to collapse
mtty do not format radio rom, so you don't need to re-flash it.

No progress
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx

kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
AS means active synchronize. Disable USB connection in AS. It has been written there bro...

kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
my friend,
active sync AS
ok
well i am just back on my chair so looking forward to do it right away
will keep u posted

tried ! but in vain!
yes i have already gone through the wikipage and tried it but after typing the command it just says its invalid command.
i have tried all the ways i can with mtty given in wikipage with no results positive.
pls can anybody suggest the commands for doc format
again thnks

hey!
after much gogling i got mtty1.16 and tried but it does not show the usb port.
so again googling does it support usb 2.0
i think it doesnt.
ok i will try on my old laptop with usb 1.1 tonight at home.
Tomal 1st thnks for ur help and valuable time
can u pls give the details for properly formatting the doc [pls.

any luck ? I dont....my uni still dead...tried with usb 1...no luck...

Not able to load JustHome V19- Herald and justStable-Build8-Herald

Folks,
I have P4350 and I am from India, I tried JustHome V19- Herald and justStable-Build8-Herald but unsuccessfull. After running hardspl I started RUU and it stops at 3% and gives corrupted file. Thanks to advice.
Also at some threads I saw it can be done by creating goldcard, is there any other way to overcome this problem.

have you tried this :
http://forum.xda-developers.com/showthread.php?t=358225

Yeah thanks for that, I have downloaded the files from site. But can u let me how to install a cab file?

Ok, I did install cab files as per instruction and ran RUU from folder HardSpl_WM6. Now it gives error message 202, connection. where as connection is fine.
please help

install the 3 cap Files in your device.
after all unplug it an reboot it
when it's done reconnect it to your Computer
check if the connection is working
and then run the RUU.exe on Your Computer.
that's the way it worked for me.
and make sure you have checked this:
Originally Posted by b.mann View Post
I've figured my issue out, maybe I can help the others that get the 202 Connection error.
On your device--BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox.
If it's not checked, most times you will get the 202 Connection error. Hard-SPL and you should be good to go!!
Click to expand...
Click to collapse

Would you put your phone in fly mode?

daniel_costa_rj said:
Would you put your phone in fly mode?
Click to expand...
Click to collapse
i am not sure why you are asking....
but i would say: no there is no reason for to do it.

If using the USPL, or trying to flash the HardSPL (which is done through USPL) then you should have it in airplane mode to avoid getting a call or text message while flashing.

Mate,
I tried and after reconnecting it was fine but the connection error still comes

In ur mobile, go to Start>Settings>System>
USB to PC >*check mark*Enable advanced network functioinality
Switch to flight mode
Then see if it works.

Guys, excellent...
at last I am able to load succesfully WM6.5
Thanks Horax and Tuhin for all the help.

Horax and Tuhin,
guys I am able to load the 6.5 ver on my cell and thanks a ton for your help in guiding me

congratulation
have fun with your new Rom
the original Guide is from papamopps so don't forget him ^^

Sure and offcourse I need to thank most of them on this forum as I have learnt lot of things.