Solved problem with the wrong ROM update / new problem - JAM, MDA Compact, S100 Software Upgrading

I've solved the problem, when i've flashed my Charmer with the wrong Wizard ROM (CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE).
everybody who has the same symptoms after flashing - single led and display white flash: just try to plug you phone into a wall power socket.
now i have a problem with a battery. it seems, that it's dead or charmer doesn't see it, because it doesn't charges from power socket at all. 0% for the whole night.
if it is a ROM issue, so i need to reflash it with charmer original frimware, but it doesn't charges from USB at all. maybe SD flashing method will work?
can anybody have any idea what to do? Thanks in advance!

damn, i've missed. can anybody move this topic into charmer theme?

Related

XDA Orbit 2 stuck in reboot-loop

Hello Guys, I've got a problem with my Polaris200. (XDA Orbit 2)
I already searched for the same issue on the polaris forums but didn't find someone who has the same problem.
Problem description:
5 days ago i flashed my XDA Orbit 2 back to the official O2-WinMobile-6.1-Firmware (GER). I had different cooked roms on it, M-Amine 2.0 was the last before this. Hard-SPL is installed of course.
At first everything was fine after flashing to o2-firmware but after a soft reset, the following happened: my phone is stuck at the o2-splashscreen, then restarts again and again every 20 secs. Maybe it helps that I can say that there is no status shown in lower-right side which usually appers ten seconds after soft-resetting the phone.
I already tried a hard reset via Bootloader Mode and a reflash of the same firmware, but the issue remains
Any suggestions what I could do?
Thank you in advance.
EDIT:
Finally I made a big mistake using mtty. The execution of task 2a erases the whole NAND... unfortunately my device isn't security unlocked so far, so that it seems to be bricked!
Do you really have no idea? Maybe there is a way using mtty.exe?
I think the main problem is, that the R+P+R (Radio+Protocol+Rom) isn't displayed at the splash-screen when booting.
Next problem is, that I can't use my guarantee because I can't reflash to original SPL due to the fact that I can't get an active sync connection because windows mobile 6.1 is not booting.
I could really need some help
wick3d337 said:
I could really need some help
Click to expand...
Click to collapse
Try the Recovery procedure. Remove the battery wait for at least three seconds, replace the battery. Flash again. Keep fingers crossed.
I did this before the "hard-brick" via task 2a...
I even removed the battery for 48 hours and replaced it... but same issue as before!
I m having 100% same problem. Tried installing different roms, even original orbit2 rom but nothing works. U r all requested to pls. Help me in this.
Thank u in advance.

Automatic shutdown in 2 minutes problem.

i have posted this problem of mine almost in everythread but no one addressed my problem.i successfully flashed my universal with Tomal's V8.9 W.M.6.1 ROM.
the ROM works great but just 2 minutes,the phone shuts down.its like,the backlight goes dim,then more dim and finally shutdown.the only way i can restart the phone is to connect it to the computer via usb cable and then start it.i have a G3 device.and not just this rom,even after flashing W.M.6.5 roms and shadow_Nuxus's roms the problem persists.
Current ROM : Tomal's V8.9 W.M.6.1
Current Radio: 10.03.03
Im not able to use my device more than 2 minutes.
Somebody please help and guide me.
if you can turn it on again with external power i think you got a battery problem.
every time we do reset or hard reset can make a bad battery down.
indrastrid said:
if you can turn it on again with external power i think you got a battery problem.
every time we do reset or hard reset can make a bad battery down.
Click to expand...
Click to collapse
ok thanks for replying.actually,the universal i had was my friend's handset.iv given it back.
i request mods to close this thread.
the solution
hi, i had the same problem, it's not your battery or any hardware on your universal i think, is the radio version, update the radio version, the last version is 1.18
tell me if this works, bye =)
As per OP request, thread closed

[Q] Help me. Battery is not working after rom update.

My first rom is LGP920-V08i-APR25-2011. I upgraded it with V10b_00.kdz. However the O3D turned off after booting. If I connect with USB cable, it is working well. but battery level is zero. if I disconnect the cable, it turned off. It is impossible to charge. The level is zero and blinking. So I upgrade it with V10d with rom manager. However the result is same. I didn't back up my phone at first time Is there any solution?? Help me...
Did you try removing the battery for a while and then putting it back in?
Take out the battery and clean the contacts carefully by scraping with a penknife or similar. Do this to the phone connectors too. Sounds like bad/dirty contacts to me.
Sent from my LG-P920 using XDA App
I have another battery. the result is same. If I work in the ClockworkMod Recovery, the battery works well. This problem is about system....
So, the battery charges when you are in clockwork recovery?
I can work in clockwork recovery without USB cable just with battery. That means lg rom system can not recognize the battery in S/W. actually battery is no problem.
You could try wiping your Dalvik Cache (just to be sure) and wiping your Battery Stats through Clockworkmod, maybe it helps.
I can wiped Dalvik Cache However it is impossible to wipe my Battery Stats through Clockworkmod. The result is same.... Do you have another idea to solve the problem??
Why my O3D can not wipe Battery Stats in the Clockworkmod? If I do this, there is no massage and retune to advanced menu. Every options except Wipe Battery Stats work very well... why?????
Nobody knows how to solve this problem?? Pls help me. Thanks
Are u using the original wall charger? LG charger that is. I have plenty phones that won't charge on computer USB when completely dead or even with aftermarket wall chargers. Also some phones are actually smart enough to tell if u are not using an OEM spec charger.
Sent from my MB860 using XDA App
Thanks for your reply. I tested my battery in my friend's O3D. And it works very well. I
think I have to use another rom/firmware...
I decided to wait Cyanogenmod on O3D. Thanks everyone...
Good luck . Let me know what happens if u try the old rom or did u already.
Sent from my MB860 using XDA App
Im having the same problem...The battery is full but it says 0% and and closes itself after booting if not connected to USB or power source.
anyone found a way to fix this? I'm having the same problem
zweetz32 said:
anyone found a way to fix this? I'm having the same problem
Click to expand...
Click to collapse
Me too!, same problem with a ROM KingMod
I set my phone for Stock & Recovery firm, unrooted. Nothing doing! I give up, nobody knows how to solve this problem. I'm totally frustrated with it.
Ratzenberger said:
I set my phone for Stock & Recovery firm, unrooted. Nothing doing! I give up, nobody knows how to solve this problem. I'm totally frustrated with it.
Click to expand...
Click to collapse
Hey man.... i posted in other topic and i don´t think anybody tried.... try to get the batterystats.bin file with someone who has a normal file. Try to put it in the right directory, it sounds stupid, but perhaps it can work, tell me later!!!
Using Root Explorer: data>system>batterystats.bin see if the file is there and if not, put there a normal one
jhonnyjhonny said:
Hey man.... i posted in other topic and i don´t think anybody tried.... try to get the batterystats.bin file with someone who has a normal file. Try to put it in the right directory, it sounds stupid, but perhaps it can work, tell me later!!!
Using Root Explorer: data>system>batterystats.bin see if the file is there and if not, put there a normal one
Click to expand...
Click to collapse
I tried it today, did not work. I tried also deleting the file, and restart the device, nothing!
I think this problem occurs with some specific versions of this model (not for sale), like mine. I don t believe that I spent $ 600 a paperweight: (

Weird sudden death

Hi all.
I have searched this forum (I know it's very frowned upon to start a thread without doing so) but the symptoms don't completely match my issue so I've resorted to asking.
I have a Nexus 5, which I was using as a hotspot, tethering to an Amazon fire stick, when it switched itself off.
It hasn't booted since, I've tried all possible button combinations for up to 2 minutes and still nothing.
If connected to a charger I get the white battery icon with the lightning bolt for a few seconds then blank screen, this will loop until unplugged.
When I have the battery icon on screen I can hold power button and it will display "Google" and vibrate as if starting to boot, then go blank again.
Have reinstalled original battery and the symptoms remain the same.
Am on marshmallow 6.0.1 totally stock am also out of warranty.
Any ideas would be greatly appreciated.
Thanks in advance.
Try to boot in bootloader mode if it boots connect to it comp and then unlock the bootloader if not and install latest Twrp if not then flash a custom rom and boot it then flash factory images .. Done. Back to Stock!
Try booting in bootloader mod while connecting it do the charger. (Wall charger )
pranavmali said:
Try to boot in bootloader mode if it boots connect to it comp and then unlock the bootloader if not and install latest Twrp if not then flash a custom rom and boot it then flash factory images .. Done. Back to Stock!
Try booting in bootloader mod while connecting it do the charger. (Wall charger )
Click to expand...
Click to collapse
Thanks for the suggestion but can't get into bootloader mode, it's only alive for about 3-4 seconds if plugged in then it goes off and then back to the white battery.
J_The_Nerd said:
Thanks for the suggestion but can't get into bootloader mode, it's only alive for about 3-4 seconds if plugged in then it goes off and then back to the white battery.
Click to expand...
Click to collapse
Mother board problem or change try changing ur battery... Surely Mother Board problem! Coz while u were connected to a hotspot and then u switched off it.. The battery would suddenly undervolt ur motherboard... And Undervolting id Very Very bad even if u change it from software or hardware...This had happen to my Sis nexus 5. .. So given it a chance changing the battery! Coz that helped Me.. But also try booting in bootloader mod and flashing twrp it will save couple of Bucks and Time
Press the thanks button if this helps
I would replace the battery first. It seems like the battery was completely drained while hotspotting.
Are you using the original USB cable and charger that came with the phone?
audit13 said:
I would replace the battery first. It seems like the battery was completely drained while hotspotting.
Are you using the original USB cable and charger that came with the phone?
Click to expand...
Click to collapse
Yes using the original charger, still does the same on power bank and old Samsung charger.
I'll give a battery swap another go.
pranavmali said:
Mother board problem or change try changing ur battery... Surely Mother Board problem! Coz while u were connected to a hotspot and then u switched off it.. The battery would suddenly undervolt ur motherboard... And Undervolting id Very Very bad even if u change it from software or hardware...This had happen to my Sis nexus 5. .. So given it a chance changing the battery! Coz that helped Me.. But also try booting in bootloader mod and flashing twrp it will save couple of Bucks and Time
Press the thanks button if this helps
Click to expand...
Click to collapse
If battery swap doesn't help is the motherboard easy to swap out? Providing I can find a replacement?
Motherboard is very easy to swap out.
Update, put original battery back in for the second time, first time didn't make a difference, possibly took longer this time. But all is good now.
Thanks to all

My Mi4c only works when charging

After my phone bricked I installed latest Chinese Stable ROM in EDL mode. I chose EDL mode for two reasons (1. I suspected that the phone only works while plugged in to charge and 2. the EDL mode turns off the phone after flashing so I can plug in the charger before booting). Turns out I was right. After the flash was over I tried to boot it without charging it first and it didn't work. After I connected it to the charger it booted normally and the ROM installed successfully.
I tried it again this morning after it fully charged. Few seconds after Ii disconnected it, it turned off. When I tried to turn it back on it was just rebooting to the MI logo screen. I plugged it in the charger and it rebooted 2 times (both times it got to those three dots at the bottom of the screen) and the third time it booted normally.
I also just noticed that the phone is curved a bit (maybe less than 1mm difference between upper left edge and rest of them), maybe from wearing it in tight pockets or something like that.
I think your battery might be dead. Try checking the voltage or the quality.
Replaceable batteries are pretty cheap.
Trimis de pe al meu Mi-4c folosind Tapatalk
Might be faulty battery, might be bad kernel, might be anything. Best way to check is to try to flash latest dev china rom via fastboot, if it still doesn't work try flashing stable 5.1.1 rom, again, via fastboot. If none of the solutions above doesnt work might be bad battery or worse, the controller on mobo died.
timipisoboy said:
Might be faulty battery, might be bad kernel, might be anything. Best way to check is to try to flash latest dev china rom via fastboot, if it still doesn't work try flashing stable 5.1.1 rom, again, via fastboot. If none of the solutions above doesnt work might be bad battery or worse, the controller on mobo died.
Click to expand...
Click to collapse
Well I hope it's a battery, because I just bought one to replace it. What is that mobo controller? Is it replaceable?
I have the same issue,
Battery replacement and stock rom of android 7 didn't help
I'm afraid is another hardware issue /:
I do have a similar problem, flashed xiaomi.eu and something have been broken.
I dont know how and why but its very strange.
Unplugged from supply i can boot up the phone, can see the miui logo and boot into fastboot but NOT into recovery and not boot up os.
As soon as i plug in supply it works quit normally, can boot up everything seems to be working, booting into twrp and flashing rom. No problem at all.
If i unplug while running os it imediately shut down.
The battery bar inside twrp show strange jumps.
What happens did somehting break ? Id like to gift the phone my mother for christmas.
Danny94 said:
I do have a similar problem, flashed xiaomi.eu and something have been broken.
I dont know how and why but its very strange.
Unplugged from supply i can boot up the phone, can see the miui logo and boot into fastboot but NOT into recovery and not boot up os.
As soon as i plug in supply it works quit normally, can boot up everything seems to be working, booting into twrp and flashing rom. No problem at all.
If i unplug while running os it imediately shut down.
The battery bar inside twrp show strange jumps.
What happens did somehting break ? Id like to gift the phone my mother for christmas.
Click to expand...
Click to collapse
Hi how did you resolved this. Facing same problem. Will replacing battery solve this.
visharagp said:
Hi how did you resolved this. Facing same problem. Will replacing battery solve this.
Click to expand...
Click to collapse
I purchased a new battery and it was working normally again and still working.
Danny94 said:
I purchased a new battery and it was working normally again and still working.
Click to expand...
Click to collapse
Great then I have to purchase a new battery ss well

Categories

Resources