Related
I have just flashed my wizard with a TNT wm6 and now I can't get activesync to regonize my device. I am using activesync 4.5. I uninstalled activesync and relaoded it. I have rebooted both my wizard and my laptop. I have checked the coms and let activesync look for my wizard and it tells me that my device has npot been detected. My wizard is showing the plugged in icon and is taking a charge from my laptop but its not allowing me to share info. is there anything I am missing....?
thanks!
I got the same problem! Cant sync with 2nd PC after upgrade to TNT5.0. I reinstalled Active Sync but it wont work. Now I only can sync with the PC which used to flash ROM. Is there any bar in OS that just allow sync to 1 computer?
Nopes !!!
There's no bar of any sort in any OS as not establish connectivity through Activesync.Which Windows are you using,Active Sync will only work on WinXP and not on WinVista.
1.Disable any Firewall or Anti virus program,check connectivity now.
2.disconnect phone from usb cable,delete partneship from pc and phone.
3.Uninstall Activesync,reboot pc.
4.Get phone into bootloaders mode (multicolor screen),Hook up the phone with pc via usb cable,check if usb appears at the bottom of the bootloaders in the phone,if it's there than,it's establishing connection with phone,if not then,there's a problem either in anyone one of these :-
a) USB cable , b) mini usb port of the phone c) Usb port of the PC.
Dig out the problem and rectify accordingly
Cheers !
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
DiCham said:
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
Click to expand...
Click to collapse
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
when it set to advanced networking it should give up a network device
in the network connections folder
rightclick this network device and choose properties and in there
uncheck the kaspersky protocol (not uninstall)
you can also try to uncheck the advanced network setting on the wizard
japsfinest said:
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
Click to expand...
Click to collapse
Sadly, I have no development upto now because I have no time to reinstall Windows in 2nd PC! I hope it will help... thinking about USB driver/controller reinstall first, it will take less time than whole WindowsXP...
japsfinest: do follow da_jojo, it worked!
da_jojo: thanks very much! It work but unfortunately, i'm right on reinstalling Windows! hehehe....
Hi folks.
My Tornado (imate sp5) was flashed from factory WM5 to WM6 with VJ Grace 3.3, it worked just fine. One day I lost conenctivity via activesync over the usb cable. BT activesync still works fine. I had not done anything to the connecter port other than using USB cable to activesync occasionally, and to use the wall charger.
After 2 months of going like this, I decided to upgrade to a newer Nitrogen ROM, and I enter the bootloader mode by pressig the camera button and plugging in the usb cable. The three color screen comes just fine.
Now, when I attach the USB cable, I do not see the small writing "USB" at the lower left hand corner.
Also I cannot connect it with Terraterm pro or the RUU utility, says phone is not connected via the USB.
But my usb cable still charges the phone when connected to the PC, even though activesync doesnt do anything.
Is there anything I can do?
Can it be a hardware error? Or a registry change I might have done using smarttweaks (enable/disable charging over usb-- I dont remember). If so can it be restored or undone?
I tried hard resets (clear storage and leftsoftkey/rightsoftkey/powerbutton combinations), but still it doesnt recognise activesync.
My other windows mobile devices get connected to same pc activesync with no problem, using the same data cable. Heck I even repaired by reflashing a friend's Wizard using the same pc and cable last week.
Is it possible that my tornado's usb connector port might have gone poof (it still charges the phone), and is there any remedy to that?
Thanks for reading, and please help..
Regards,
Steve
I've got the same problem. I can't connect via AS:/
I had a similar problem once in a while when I upgraded my phone to WM6; it seemed almost random. One day, the phone wouldn't switch out of Vibrate mode, and ActiveSync wouldn't synch with the phone. The first time it happened, I had VJGrace's 3.3, and 3.4 had just come out, so I went ahead and flashed it. I didn't format binfs or anything (which, in my experience isn't necessary for a functioning OS flash, just a clean one) but it flashed a fresh WM6 on, and the problem went away.
Then, a couple weeks later, I had the same problem again. It was right around the time that VJ's 3.7 came out, so I flashed that (again without format binfs) and it fixed the problem again.
Then, a couple weeks later, I had the same problem yet again. This time, Nitro's Platinum Edition had just come out, so I flashed it. Haven't had the problem again.
Interesting note - since I got my Tornado, my first Smartphone, I have only ever done the format binfs once - the first time I flashed WM6. Haven't done it since. It's my opinion that format binfs gives you a CLEAN install of WinMobile, but is not strictly necessary.
So, to summarize: try direct-flashing a new WM6 install. Just plug in the USB cable - ignore ActiveSync when it fails to synchronize - and run the updater program. It'll take care of the rest, even if AS doesn't synch.
djsleepwalker:
If you lost USB connectivity, how did you flash your phone?
Should I read between the lines that the bootloader connected properly and that it was a WM6 driver problem?
Exitao said:
djsleepwalker:
If you lost USB connectivity, how did you flash your phone?
Should I read between the lines that the bootloader connected properly and that it was a WM6 driver problem?
Click to expand...
Click to collapse
To be totally honest, I'm not 100% certain. See, ActiveSync wouldn't SYNCH with the phone, but I could still "Explore" the phone. WM6 was active and working, and charged via USB cable, it just wouldn't synch.
So, after I connected the USB cable and ActiveSync popped up a message that said it couldn't synchronize with the phone, I just started up the ROMUpdateUtility program. It rebooted the phone into the bootloader for me.
I honestly never tried to start it back up in bootloader mode. The only reason I decided to just flash a new ROM was because I had already downloaded the ROM, but where I was at the time, I had no internet access (and therefore couldn't remember the steps before flashing the new ROM.) A friend of mine who has a Wizard (and who, I think, might be a member of this forum) suggested that I didn't *have* to format binfs to put an updated ROM on the phone, so I said screw it. I needed it out of Vibrate mode (my phone is my second alarm - my second line of defense against oversleeping) so I flashed the new ROM.
ninja edit: If ccpraveen is getting *nothing* when he connects the USB, then my suggestion probably won't help. But if Windows recognizes something being connected, and he can *explore* the phone, but ActiveSync just won't synchronize, then he's probably having the same problem I was. I can't tell for sure from reading his post.
Sweet...
Thanks for the comments, its all dejavu again
Djsleepwalker's comments did make me wonder, hey this is exactly my problem, except that mine doesnt connect in any manner.
Lots of similarities, problems started with VJ 3.3, on and off for a while with USB, then totally lost connection.
I am not concerned with formatting BINFS now, I somehow want to get the phone recognized.
Exitao has actually asked a VERY VALID query. It is indeed impossible to flash a phone without any USB connectivity (unless via an SD image or something). Djsleepwalker's issue was minimal, only that the PC was not showing up the activesync as connected, but indeed there WAS a connection, he could explore the phone from the pc etc, and I bet if he did go into the 3 color screen, he would have seen the "USB" on the left lower portion.
So, mine is just that. No connectivity. Nada. PC just sits dumb. Phone just gets charged, and finally into the fully charged green LED. Thats it.
Could there be something in VJ's ROM that is doing this?
I wonder, because a Wizard I once tried to repair would not let me flash upgrade either. I had to go back to a basic BUTTON ROM to get the upgrades running properly again. But there atleast I had connectivity then.
After I read DJ's comments, I tried running the RUU straight, without getting into the bootloader (for a change). Again its the same error 260. Here is a screenshot.
Anybody?
Regards
Steve
It seems, from the description, that the activesync profile became corrupt.
Deleting any device profiles from Activesync and connecting the phone as a new device might also solve the problem. However, it might be active synch on the phone that is the problem...
Anyone unsure how serious their problem is should just turn off the USB connect in activesync, start the phone into boot loader and do an "info 2" with terraterm pro.
If terraterm discovers the device, the USB is not the problem. It's activesynch.
Terraterm pro would not connect either.
I started the phone into bootloader by plugging in the usb while keeping the camera button pressed. Started the terraterm pro, selected Serial > USB, clicked Ok, Terraterm says ERROR, Cannot Open.
One minor thing, what do ppl normally see in their bootscreens? I see these lines, Tornado IPL 2.00 Tornado SPL 2.00.0000 and another line Tornado IU.
I dont remember seeing this third line saying Tornado IU before. Is it normal? It is in the middle zone( green coloured zone).
I believe my usb connector port might have a physical error. What else it could be. PC just will not detect ANY sort of USB connection.
Thanks again Exitao, I am stumped.
Regards
Steve
Have you tried any other USB ports on your computer? I know it's a longshot, but on my desktop PC one of the onboard USB ports just doesn't function at all. The other three do.
ninja edit: Maybe try it on another computer, too?
I tried on all four USB ports of my laptop, as well as on another Desktop PC I have.
Even without activesync installed, plugging in this should bring out a DING, saying something has been connected to the PC USB. (and asking for drivers, if Activesync was not installed. Here nothing happens, no DING). Remember, the same USB port is being used to sync my Wizard, Blackjack 2 and my old Himalaya even now.
Another possible reason, I was using a dumb chinese charger for charging the phone, after I lost the original one. Could that might have fried the usb pins?
ccpraveen said:
I tried on all four USB ports of my laptop, as well as on another Desktop PC I have.
Even without activesync installed, plugging in this should bring out a DING, saying something has been connected to the PC USB. (and asking for drivers, if Activesync was not installed. Here nothing happens, no DING). Remember, the same USB port is being used to sync my Wizard, Blackjack 2 and my old Himalaya even now.
Another possible reason, I was using a dumb chinese charger for charging the phone, after I lost the original one. Could that might have fried the usb pins?
Click to expand...
Click to collapse
Please excuse me if I'm stating the obvious, or if I'm a bit off, as I don't haven't used my Tornado in a bit (upgraded to Touch Cruise), but in the last ROM I used, NitroGen's latest WM6 version, there was an option in settings to disable usb connectivity and only allow USB charging. Perhaps VJ's ROM has the same option and you activated it. Have you already checked this?
Did you remeber to uncheck "Alllow USB connections" in activesync before you connected the boot-loaded phone?
This may be a hardware problem. Is it possible to use a can of compressed air to blow out any dust or debris from the USB socket on the phone?
Do you have WMStorage on your phone? If not, can you load it onto your storage card and install/run the app and see if the PC will recognise your device as a USB mass storage device?
I guess you also want to check the Device Manager in Windows and check for any exclamaition marks (!) or "bangs." Both with the phone disconnected and connected, and maybe even with wmstorage enabled. If it does show your phone in the device manager, delete or remove the device in the manager and reboot.
(To get to device manager, you can right click on "my computer" and select "properties", or press the Windows key and the Pause/Break key, or go to the control panel applet.)
BTW: is this XP?
If you are using Vista, try the following:
Step 1: Press Start
Step 2: Select settings
Step 3: Select (6) Connections
Step 4: Select (0) More
Step 5: Select (1) USB to PC
Changing the type of USB connection your device uses can help with problems
connecting ActiveSync.
Step 6: Disable the option - Enable advanced network functionality
Step 7: Press done 3 times
Step 8: Return to main screen.
Step 9: Uninstall unrecognized USB device in device manager (on PC)
Step 10: reboot Phone and reconnect
Click to expand...
Click to collapse
If XP, keep going...
You've stated that the PC is recognising your other devices. Isn't there a limit to the number of windows mobile devices you can sync or associate with one installation of activesync? Can you delete a device and try again?
Is USB charging enabled or disabled in your phone? Try toggling the setting to opposite whatever it is.
If you are using a firewall app, add these programs to your firewall's exemptions:
# Wcesmgr.exe
# Wcescomm.exe
# Rapimgr.exe
Or simply disable any firewalls, network traffic optimisers or possibly antivirus (some have network protections) app to test if that has an effect.
Ok guys..
I will try doing all these, step by step and lets see
And accept my sincere gratitude from my heart for detailing all these info for me, I am soo deeply moved
Sincerely
Steve
ccpraveen said:
Ok guys..
I will try doing all these, step by step and lets see
And accept my sincere gratitude from my heart for detailing all these info for me, I am soo deeply moved
Sincerely
Steve
Click to expand...
Click to collapse
No need for thanx. If I helped, just give Nitro a donation on my behalf.
Well guys, with deep regret, I must say, even after trying all that, the phone stays put. PC wont recognise it, neither as a phone nor as a mass storage device. The connector port must have gone kaput.
I kinda feel stupid, u know, with all the tweaks and hacks out there, what use it is, if the dumb thing wont be recognised? Hmm.. So much for the tornado, now stuck at VJ 3.3 (unless someone find a way to flash via an SD image or something).
Well, thanks guys, your support did make me feel better, in the WM world, all is not lost, as long as there are good souls like you, willing to help, live and let live.
Regards
Steve.
PS: If the phone was not recognised in the bootloader mode, (ie even before the operating system has kicked in), I guess there should not be any difference if activesync was installed or not; and if or not mass storage option is enabled or not, right? Well, correct me if I am wrong, I think so. Could be wrong.
This is probably a useless comment, but have you tried using bluetooth instead of usb to connect to your computer?
Have u tried to delete the network card from XP device manager ?
U can also disable advanced network functionnality from your smartphone in "settings" -> "connections" -> "USB to PC"
Good luck
Can You Tried Different Usb Cable :d
i have some problem, after flashing to WM6 activesync or WM5torage can't connect..i have HTC prophet too, and i use same usb cable & PC, my HTC Prophet still can connect via activesync or WM5torage
*please..please..help us
I UPGRADEd vjgace Build_5.2.1616.18120_____v3.7 three days before today i can't connect to usb i tried diffrent app(activesync,wm5storage,internetsharing) but i can't connect so i go to bootloder mode and checked devicemanager i found device so i flashed nitrogenius rom and now working usb. try upgrade other ROM ON BOOTLODER MODE.
Hi friends,
I am having a very weird situation here and I need your help.
My phone was working perfectly after the last time I have upgraded the rom which happened a couple days ago. Then yesterday I have discovered that my phone is turning on and off on its own. It turns on, then after a few seconds it turns off and then turns on again.
When I hard reset, it gets stuck at the smart mobility screen.
I can enter the bootloader screen by pressing the camera key and inserting the usb cable. The tri-color screen shows usb at the bottom left corner. When I run mtty, it says the usb port cannot open.
I know that it has sufficient power in the batteries (tried with two different batteries I have). However, when I plug it to a wall charger the charging light doesn't turn on.
So basically I have a tornado which cannot boot, mtty seems not able to recognize it. Is there any way to push an SPL, radio rom or OS rom to the phone? Is it possible to flash a tornado with an SDcard?
I really need some help here as I am out of ideas. thanks in advance.
Did you try hard resetting it? (While off holding both softkeys and then pushing the power button)? If so, flashing from card is possible...you just have to install the original ROM though. Google this: Tor_TMOUS_10140_191916_10900_SHIP.exe
Extract it then copy the nbf file to your memory card.
You may have to rename it and change the headers though...that I don't know
Here might help you by the way
http://forum.xda-developers.com/showthread.php?t=409286&highlight=original+rom
Good luck!
Your problem is more likely seems the power key is stuck.
thacen said:
Your problem is more likely seems the power key is stuck.
Click to expand...
Click to collapse
I am almost sure that this is not the case because I can use the power button for shutting the device off and restarting it, etc.
My only hope is to be able to flash from the SDCard now, as unforsakenrule mentioned. The problem is I need a step by step guide to do that.
burkay said:
When I run mtty, it says the usb port cannot open.
Click to expand...
Click to collapse
Did you disable the USB connection from ActiveSync properties?
I had had a similar problem which was solved after reinstalling the ROM.
NiTroGenious said:
Did you disable the USB connection from ActiveSync properties?
I had had a similar problem which was solved after reinstalling the ROM.
Click to expand...
Click to collapse
sure I did. The problem is no matter what the device is not recognized by the pc. mtty, activesync, tera term, etc. all fail whether usb connection is enabled or not. Weirdly, in the bootloader menu it says USB in the bottom left.
It really sucks, because I have the bootloader there but I cannot load anything to the device to recover it.
While it is in bootloader screen activesync couldn't connect or it could not detect your device. If you want to connect by teratermpro you need to disable USB connection from active sync otherwise teraterm could not connect your device.
I think your PC will not show you any connection symbol while connecting in bootloader but you may hear some sound while connecting or disconnecting.
One thing you can try is just try reflashing a stable rom by just running RomUpdateUtility. If it cannot find your device then check on your PC's Hardware device manager, if there is any unworking driver. if such driver is there just uninstall it and try connecting again.
May be it can solve your problem.
thanks for the advise, but I pretty much tried everything... everything except an SDCard flash. And that, I don't know how to do. I have been an HTC user for the last few years. This iMate SP5, which I owned a year ago, belongs to my sister now. I now have a Hermes, waiting for the prices to come down before ordering my touch pro. I flashed tens of roms in both devices, connected using mtty, teraterm etc. many times. This is the first time I am totally left clueless and I believe this is what we call a brick, indeed
hello everyone,
I cannot get Activesync to recognize my htc touch pro no matter what i do,... i've uninstalled and reinstalled shut everything off then on, followed all of MS's advice, and nothing works,...
Any suggestions,...? No problems connecting my tytn II and my hermes,...
thanks,
ek
Are you running any firewall software? If so, this is relevant to you.
start>>settings>>connections>>usbtopc>> un check the "enable advanced network functionality"
sorry attnoob, was trying for your quick fix, but it didn't work,... thanks anyway,... now will go to the firewall issues noted above, but i already opened the ports as per ms's recommendations in help,...
will try other suggestions and get back to you,...
ok, so allenh, read all the info at the link you sent me, and actually did all these things yesterday, but it didn't work,... also, something strange happens when i hook the device to the PC in that, the device immediately goes to the 'internet sharing' program you use when tethering, it establishes a connection with the internet, and there is a comments saying 'check usb cable connection' and this never happened with the tytn II,...
your help is appreciated,...
ek
Check the USB cable
It seems the USB cable the Tilt uses and the one the Raphael/Fuze use are different, If i use the cable that i usued with my tilt the computer would not recognize the Fuze it will charge it though, only if i use the usb cable that came with the Fuze it works fine.
Are you using the stock ROM or a cooked ROM. Some of the new cooked ROMS are having this problem.
Also, are you using Vista or XP. The problems seem to be with XP.
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
btw, it didnt start doing this until i flashed NATF's v2.1 and also loaded a custom theme and toolbars and such.... it worked after i loaded NATF's rom, just randomly stopped at some point after that.
if you are putting on a new rom then put the phone in bootloader mode it worked for me
LostcauseZ06 said:
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
Click to expand...
Click to collapse
My Fuze is doing this too, excep every single time. I can't get Activesync to work through USB. And I'm running the stock ROM. Internet Sharing automatically connects.
Okay, I set Internet Sharing to Bluetooth PAN (instead of USB), which kept it from automatically starting when I plugged in the USB. This let ActiveSync and the 'choose a connection type' startup on my Fuze and everything has been fine.
Try your PC Network settings
Hi,
I have the same problem recently. My AS does not want to recognize my Raphael. What I did was go to the network setting of the PC (Network Connections) and disable the 1394 adapter. Then my AS now can recognize my Raphael. The next unsolved thing is how to make the connection stable enough to make happen the syncing.
Drax
Hi, I had similar problem. Once upon a time the connection between my Touch Pro (WM6.5.3) and PC stopped working. Activesync did nothing and after a minute gave error message with troubleshoot guide. So I opened control panel ---> device manager (with mobile connected via USB), where I found "Windows mobile based device" between network adapters. I opened it and under it's advanced settings I found "network address" which was set to "unavailable". So I changed it to 192.168.2.2 and now it works again ;-)
Hope it helps someone ;-)
I have a strange problem with a HTC Touch PRO. Here is my problem:
- I insert the USB cable and the phone asks if I want to use mass storage or activesync
-the phone shows a connection on the screen
-The PC is not sensing anything, the activesync is not connected.
I think this problem appeared after I used a wrong usb cable...
Anyone knows anything what to try? or this is a hardware problem?
Did you select ACTIVESYNC?
There are 2 modes this phone can do..
1) Standard ActiveSYNC or
2) AS a MASS STORAGE DEVICE -like a flash drive...
You have to select ActiveSYNC to actually SYNC software/calendar, else it will show up as just another drive to drag/drop files..
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
The problem is likely with your operating system on your pc.
You can try things like, un-installing the HTC usb driver in device manager.
Check your firewall.
- allow activesync for trusted
- I know for ZoneAlarm you have to go to the adapters section and set the ipaddress (a new one is created when your phone is hooked up via USB) to be trusted.
If that doesn't fix issue perhaps its a corrupt install of ActiveSync. Try uninstalling and reinstalling.
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
I've had this happen to me. I've got so many USB to mini-USB cables and they are not all alike.
Sometimes, it would work and sometimes activesync would not recognize it.
CHANGE YOUR CABLE to another. Hopefully, you've labeled the original cable that came with the phone..
(also, look at the mini cable where it plugs into your phone. Make sure there are no loose pins and/or verify that the 'plug' is level.
Try a different USB port
Try unchecking "use advanced network configuration" in Async settings on the phone. Some computers (for various reasons) have a hard time communicating with the phone when it's configured as a network device - unchecking this will often allow Async to find and connect to the phone, at the expense of some other functionality.
coincendentally i am having the same exact issue, it started last night.
i have tried 3 different cords, on all 3 usb ports on my computer. same thing the phone asks what kind of connection i want whether i select disk drive ofr active sync noting happens. whats weird is that the phone is charging when its connected however the computer is not seeing it at all.
i have tried all the recommendations in this thread but nothing is working. anymore help would be greatly apprciated!
Me too I have tryed everything but none is working.
I think that this a hardware problem, and the problem started to happen after i used a non HTC cable, bad quality. I think some kind of controller is dead. So i started to live with that
When I connteced to the PC via USB, my TP also asked me how to connect (AS or as disc). But suddenly it doesn't ask anymore. I had to deactivate "advanced network configuration" to conntect to AS.
The checkbox "ask each time USB connects" is activated.
What can I do that the phone asks again when I connect it?
Thx.
I have the same thing going on... suddenly a few days ago my fuze only charges when I plug it in the desktop with a usb cable... I re-flashed and it worked about halfway through a sync and then started again... I've tried different cables... uninstalled all of the usb drivers, and reinstalled then updated them... Disconnected the power supply... tried every setting on my phone, and in windows.... I've even uninstalled the last batch of windows updates that came out last week... nothing seems to work...
really simple solution.
decheck advanced network config. plug in cable wait till you see usb connected. a small box. after that choose for example activesync
internet share
This happened to me last night and I figured out that after you toggle your internet sharing you can sync up again. Idk why it works out like that but it worked for me.
This sound reasonable, because the last thing I did before was selecting the "internet sharing" option in the menu when you connect to USB.
But what do you mean with "toggle your internet sharing"? Can you please describe it.
Thx.
try this
okay - first see if you're getting an active connection with your pc , not from the network connections window, but by running mymobiler. I was getting a connection through mymobiler, but active sync wasn't recognizing the device. If mymobiler works, Call your phone. it will drop your connection with mymobiler when you answer the call. then hang up the phone call. (all the while leaving your cable plugged into your phone. When the call has been disconnected your activesync will recognize the connection and sync up again. I don't know why this works, but I've been able to duplicate the results several times.
Same htc ****+ wm. Bought an iphone 3g. Everything must be tuned in windows mobile! It doesn't work how it should!
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Reinstall Mobile Device Manager!
modulusman said:
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Click to expand...
Click to collapse
I've experienced this issue multiple times, as I use my TP to sync with many stations. The solution is way more simple than you think and it has nothing to do with cables!.
You probably use Win Vista so all you need is to uninstall "Windows Mobile Device Center", restart the PC and install a fresh copy from MS site.
http://www.microsoft.com/downloads/details.aspx?FamilyID=83D513EA-9DF9-4920-AF33-3A0E2E4E7BEB&displaylang=en
If you're on XP, do the same with the Active sync solution for XP.
Good luck!
yeah this happens to me every now and then. the advanced network configuration option really helps, but sometimes i just need to plugin/unplug the usb cable from teh phone/cable or cable/computer a couple more timesbefore it picks it up...
goodluck!