Hi everybody, i'd like to know if anyone knew how to enable the use of the CRUISE microphone while an external earphone (without microphone) is plugged (with a mini-usb to Jack 3.5mm adapter).
Because my original hand'sfree kit is broken, now i want to use earphones to make calls and use the cruise microphone to speak.
When i am calling, i can hear people with my earphones but they can't hear me because there's no microphone with my earphones, so i would like to make calls with my earphones but using the device's microphone.
Is it possible ?
Sorry if my explaination seems too messy..
Thanks a lot
I used standard earphones and Cruise's built-in microphone without any extra efforts or settings on a standard ROM.
Why you did not just try?
Hi, thank you for you answer, i've tried it but people can't hear me when i talk while adapter+3.5earphones are plugged.
I dont know how to make it, maybe modifying something in the registry ?
If somebody knows anything, can he/she tell how to activate the built-in microphone when an adapter for 3.5jack is plugged ?
Thanks a lot
Take a look at this:
http://forum.xda-developers.com/showthread.php?t=369243
Hope it helps!
Related
Hello guys and gals,
I have a newbee question for all u gurus out there.... i have a jasjar running wm6 and i was just woundering if there is a way/registry hack to increase the in call volume and the in call speaker phone volume???
I also use my jasjar in my car with a cable that has a 3.5 jack on each side(one end pluged into my jasjar and the other end pluged into my car stereo) and i can listen to music just fine but when a call comes in i can hear the other person but the other person cant hear me at all??? i do have my mic AGC enabled, any ideas as to why this is happening???
Thanks alot u in advance u guys.
Regards,
Farhan
farhanali_ said:
Hello guys and gals,
I have a newbee question for all u gurus out there.... i have a jasjar running wm6 and i was just woundering if there is a way/registry hack to increase the in call volume and the in call speaker phone volume???
I also use my jasjar in my car with a cable that has a 3.5 jack on each side(one end pluged into my jasjar and the other end pluged into my car stereo) and i can listen to music just fine but when a call comes in i can hear the other person but the other person cant hear me at all??? i do have my mic AGC enabled, any ideas as to why this is happening???
Thanks alot u in advance u guys.
Regards,
Farhan
Click to expand...
Click to collapse
i think its obvious....uhhh...where is the mic. mate???
Plugging in a headset like cord (any 3.5) disables the device mic, you need an adapter (search the uni accessories section of the forums).
fallenczar said:
i think its obvious....uhhh...where is the mic. mate???
Click to expand...
Click to collapse
Well i use it with my htc wizard and it works just fine...
now as for the jasjar, the strange thing is that i can use
ms voice command when the cable is pluged in....if the
mic is disabled when the cable is pluged in then ms voice command
shouldn't be able to pick up anything iam saying but it does
Universal/Jasjar
If you connect a jasjar to a stereo jack, you will activate the headset profile on the phone automatically, witch means that you will not be able to use your onboard mic for phone calls, You can always try and use your handsfree's headset wire that came with your phone and modify the wiring on that, if you know how...Cheers
Thanks for all your replys you guys,
Is there a way to deactivate the headset profile when a 3.5 stereo cable is plugged in??? pls let me know
Thanks
farhanali_ said:
Thanks for all your replys you guys,
Is there a way to deactivate the headset profile when a 3.5 stereo cable is plugged in??? pls let me know
Thanks
Click to expand...
Click to collapse
Hi,
Use a mono jack and you will get audio from the car speakers and the Uni will use the built in mic.
It worked fine for me when I first got my Uni, but now I have bluetooth on the stereo, but better.
Cheers,
Beast
Looking for anyone with some ideas.
On my Polaris (Touch Cruise) I connected my move to my car radio using the extUSB splitter for charging and audio, on my polaris I could answer my phone and have the audio come through my car radio using the AUX input but the microphone on my phone would always work. This was perfect for me.
With the Touch Pro, the microphone does not work with the extUSB inserted, sound still works perfectly as before but my only problem is that people cannot hear me. Is there a Reg setting to keep the mic on my phone connected and disable the mic output on the extUSB connector.
I know the Pro has Video Out on the extUSB but this should not affect the mic.
TB
anybody got any idea?
Hi,
I bought a simple USB adapter to jack audio, see attached file, to use my Diamond as a mediaplayer.
I can hear a phone call across my car hifi but the built in mic is disabled.
I think that there is a setting in the registry to enable the built in mic, someone can help me?
Thank you
Luigi
If someone find a solution i'm also interesting!!!
I've tried some apps but no-one fonction to activate the mic with this cable.
It occurs because the jack adapter is not officially supported, and Diamond recognizes it as a stereo HF, disables built in mic and is trying to recept sound from HF mic (that is not present).
But yeah, it'd be nice to activate built in mic somehow ...
Where did you buy one of those! Like the name and make of it, but I can also tell you why its not working.
What you bought their is a simple adapter, not an amplifier. (Im sure amplifier is not the right word, but go with me) Basically, if you want it to work you need a device that changes the analog waves to digital waves of the usb, which by looking at that, doesn't do it.
If you're wondering were to get this magical device... well lenovo used to make one that came witha cheap headset.. but they stopped producing it a while ago.
You can buy one of these adapters:
HTC Diamond 3.5mm adapter, with mic
Is there anything available that will force my HD2 to use the internal mic while a headset is plugged into the 3.5mm socket?
I often use my HD2 to listen to music in my car using a 3.5mm jack to jack cable into the aux in port just near my handbrake which works a charm.
When I get a call the music is interrupted and if I answer it I can hear the caller through my car speakers however they can't hear me as the phone is in headset mode and is expecting a mic to be plugged in.
I don't think it's a simple case of re-routing which mic is used as while that may technically work the caller would be able to hear themselves delayed through my cars sound system. I need the phone to send the mic into speaker mode so it has a detection system that stops the caller hearing themselves but send the output through the headset socket.
I hope that makes sense?
seems strange that it does not working .. i use this way to listen music & gps instructions and it is working ok, with the phone's microphone.. try i different 3.5mm jack (stereo) .. or you have a cooked rom ?
I just tried a different cable and it's working! strange for some reason the HD2 must have thought my cable was headset?
Thanks!
yeah it dosnt work cuz if u look @ the original headset it has 3 lines which meant 2 for the stereo ear pice and 1 for the mic, i have the same prob i dnt like the origenal headset so i use mine which means i have to unplug it every time i get a call, but i think the only way to use good headset with mic is to buy the iphone headset, its the same priciple with a better sound quality of the headset
If your jack has only 3 contacts, the phone can sense there's no 4th one, so there's no mic, and uses the internal mic. If your cable has 4 contacts, it will try to use external mic even if there's actually none.
oooo yeah u r right, lol, jst tried it it work
thnx man
wow, i was just asking myself the same question. i have a pair of sennheiser earphones(without mic), when i take an incoming call the other side cannot hear me most of times. but, sometimes the internal microphone is activated and i can speak using my earphones. this seems a quite random problem, i don't understand. even with skype, sometime i can use earphones, some other time i'm forced to unplug using the loudspeaker...boh...
i want my phone mic since my built in carstero mic is to far away
On a similar note, is it possible to have the internal speaker announce GPS instructions while I'm playing music via Bluetooth?
spyrale said:
wow, i was just asking myself the same question. i have a pair of sennheiser earphones(without mic), when i take an incoming call the other side cannot hear me most of times. but, sometimes the internal microphone is activated and i can speak using my earphones. this seems a quite random problem, i don't understand. even with skype, sometime i can use earphones, some other time i'm forced to unplug using the loudspeaker...boh...
Click to expand...
Click to collapse
yeah .. im experiencing the same problem as well. Its random . Therefore, i do not know if the HD2 supports the use of mic when we plug in out earphones. From what i tried, sometimes im able. Other times im not . i dont know whats wrong as well. Anyone here has a solution ???
no one knows or has any solution ??
elyl said:
On a similar note, is it possible to have the internal speaker announce GPS instructions while I'm playing music via Bluetooth?
Click to expand...
Click to collapse
if you want the voice on the car stero the ngo to the bluetooth settings moor or advance whatever and select play system sounds or something like that
Hi there,
I've got a simple problem to solve: When in my car, I have my Raphael plugged to the car stereo with a cheap ExtUSB Adapter. The phone recognizes the adapter as a Headset, but I don't have a microphone attached.
When someone calls, I want to use the headset Audio but with the handset microphone.
Is there any easy solution for this? Putting the phone to speaker mode works sometimes, but the phones speaker isn't loud enough for most situations.
thx, h3po
push...
another situation, same problem:
I just bought a cradle for my Raphael which happens to have a built in microphone and a line-out jack, which I do not plan to use. But when I plugin my handset, it goes to headset mode and I cannot hear the ringtone when the phone rings.
I can't believe there's no way to choose the speaker output =/