Database Info

Dutty 1.1 install problem - please help stuck at 0% and recovery starts

I have the new Hard SPL installed and when I try to install the Dutty 1.1 it's reseting my device and show likes it going to update and it just sits there at 0%. After that it says stuff about recovery and I do all that, and get everything back to normal again. Last I try the update agian and stuff get the same thing over and over.
Has NE1 ran into this problem at all?

I had the same due the fact that I had not run hardspl before installing the ROM.
A matter of "READ THE MANUAL"!

did u get it fixed? i installed the hard spl thou..
Also I tried installing a different one now and I get the same problem?? what is going on?

masta7100 said:
did u get it fixed? i installed the hard spl thou..
Also I tried installing a different one now and I get the same problem?? what is going on?
Click to expand...
Click to collapse
I got it working now.. i feel like an idiot

masta7100 said:
I got it working now.. i feel like an idiot
Click to expand...
Click to collapse
I felt the same.
The good thing is that you fixed it!

robix said:
I had the same due the fact that I had not run hardspl before installing the ROM.
A matter of "READ THE MANUAL"!
Click to expand...
Click to collapse
As my dad always told me.
RTFM (Read the f*%$#[email protected] Manual)

Can you guys tell me which version of hardSPL you used? When i try using kaiser-HardSPLv1 and also Kiaser-HardSPL-3.28 and both fail to install. Where am i going wrong?? Thanks in advance for anyone's assistance.
_____________
ATT Tilt
GSM... Unlocked
KAIS1*0
SPL-3.56.000
CPLD-8
WM 6.1(CE OS 5.2.19214)
ROM:3.57.502.2 WWE
Radio:1.65.21.18

givantake said:
Can you guys tell me which version of hardSPL you used? When i try using kaiser-HardSPLv1 and also Kiaser-HardSPL-3.28 and both fail to install. Where am i going wrong?? Thanks in advance for anyone's assistance.
_____________
ATT Tilt
GSM... Unlocked
KAIS1*0
SPL-3.56.000
CPLD-8
WM 6.1(CE OS 5.2.19214)
ROM:3.57.502.2 WWE
Radio:1.65.21.18
Click to expand...
Click to collapse
Install hard SPL 3.* exactly as in post #2 of this thread: http://forum.xda-developers.com/showthread.php?t=396922
If the first method doesn't work, try the second one.
Thanks
Dave

such a dunce i am
thank you SIR, soo kind, soo kind! i could kick myself in the tosh for not reading through the instructions. Thanks again!

Help.. three questions

1. Awhile ago I used Hard-SPL on my phone. If I hard reset my phone. Will I have to Hard-SPL again?
2. About ROM's I remember when I flashed a rom awhile back ago, I did it through MiniSD card. Can all ROM's be flashed through minisd? I've only flashed it once, so I wouldn't know.
3. Do I need to plug my phone onto my computer to flash the radio?

DVS_WiNdz said:
1. Awhile ago I used Hard-SPL on my phone. If I hard reset my phone. Will I have to Hard-SPL again?
2. About ROM's I remember when I flashed a rom awhile back ago, I did it through MiniSD card. Can all ROM's be flashed through minisd? I've only flashed it once, so I wouldn't know.
3. Do I need to plug my phone onto my computer to flash the radio?
Click to expand...
Click to collapse
1 No its a once only type deal...
2 Sorry cant help you there
3 I am also not sure if it can be done via the sd card sorry...

yes, you can flash through microsd, radio/os/splash screen it doesn't matter.

XtreMe_G said:
yes, you can flash through microsd, radio/os/splash screen it doesn't matter.
Click to expand...
Click to collapse
How do I flash radio through SD card? I tried downloading one and it is a exe file that I open on my PC..

I've tried downloading a few ROMs too and they are .exes
Anyone know which ROMs and Radios I can install through SD card?

there is a procedure on how to do it...please search. It's somewhere around. Maybe even a sticky.

thomassster said:
there is a procedure on how to do it...please search. It's somewhere around. Maybe even a sticky.
Click to expand...
Click to collapse
Okay.. got it.

I would reccomend you just use a computer. Safer and secure. But good luck on your journey thou of flashing.

deviusdragger said:
I would reccomend you just use a computer. Safer and secure. But good luck on your journey thou of flashing.
Click to expand...
Click to collapse
The safer part is debatable. It may be safer if you ise a UPS device. Otherwise a laptop or MicroSD may be "safer"

deviusdragger said:
I would reccomend you just use a computer. Safer and secure. But good luck on your journey thou of flashing.
Click to expand...
Click to collapse
My USB port on my Kaiser is damaged, so I am unable to do flash it through PC.

Shadowdh said:
1 No its a once only type deal...
Click to expand...
Click to collapse
Okay.. good because I can't do a Hard-SPL again..

Help, I Locked Kaiser in the tricolor screen

I need help. I locked the kaiser run Rom Original Pt in 15%, it locked with error264 ID SALESPERSON INVALID, now he doesn't leave the tricolor screen more, begin other Rom and the same thing.
Rom Version: 3.29.422.1 wwe
Rom Dates: 20/05/08
I radiate Verson: 1.65.20.29
S/N: HT822G002432
She long for has this Rom to try thank.
Thank you very much.

u didn't hardspl first did u? nor did u bother reading all the info this forum has, did u? if u search for kaiser stuck in tricolor screen (bootloader) u will come up with so many results as a post like this is made everyday !!!
now what u need to fix ur problem is either to flash oem original rom or post info from ur bootloader so it can be determined whether u have ruunbh errors or not.

thesire said:
u didn't hardspl first did u? nor did u bother reading all the info this forum has, did u? if u search for kaiser stuck in tricolor screen (bootloader) u will come up with so many results as a post like this is made everyday !!!
now what u need to fix ur problem is either to flash oem original rom or post info from ur bootloader so it can be determined whether u have ruunbh errors or not.
Click to expand...
Click to collapse
I began Rom Original pt, he didn't give right but it restarted, then I used JumSPL1.56 and it turned up to 15% and it locked.
My English is very weak, if it can help where I find this Rom, because I am trying but I don't find.
I would not like to give work, but II would not like to give work, but I am not any getting to solve. Thank you very much for the attention. am not any getting to resolve. Thank you very much for the attention.

Willgb said:
I began Rom Original pt, he didn't give right but it restarted, then I used JumSPL1.56 and it turned up to 15%....
Click to expand...
Click to collapse
Jumpspl is NOT FOR FLASHING roms ... it is strictly for flashing spls ... please please please do yourself the favor and read the wiki. I bet you now have ruunbh errors ... go to your bootloader and see if it says that:
to get bootloader, power down phone than power up while holding down the camera button.

thesire said:
Jumpspl is NOT FOR FLASHING roms ... it is strictly for flashing spls ... please please please do yourself the favor and read the wiki. I bet you now have ruunbh errors ... go to your bootloader and see if it says that:
to get bootloader, power down phone than power up while holding down the camera button.
Click to expand...
Click to collapse
He continues locked in this screen

Willgb said:
He continues locked in this screen
Click to expand...
Click to collapse
okay write down the information posted on that screen and post here... you might have to use a tool called mtty to fix your problem ... but lets me certain first.

thesire said:
okay write down the information posted on that screen and post here... you might have to use a tool called mtty to fix your problem ... but lets me certain first.
Click to expand...
Click to collapse
Good I call and he already appears in the tricolor screen, KAIS 100 SPL-3.29.000 CPLD-8, tried to run Radiate original 1.65.20.29 and it begins but it is locked in the 0%. If you need of more information it is only to say. Thank you for the help

Willgb said:
Good I call and he already appears in the tricolor screen, KAIS 100 SPL-3.29.000 CPLD-8, tried to run Radiate original 1.65.20.29 and it begins but it is locked in the 0%. If you need of more information it is only to say. Thank you for the help
Click to expand...
Click to collapse
okay i think you are just hung after a bad flash and you can use mtty to reboot the os here are the instructions on how to do it:
gsleon3 said:
Use of MTTY to recover from these errors is usually simple. The basic outline of how to use MTTY to resolve these errors is as follows:
1. Right click on the quicklaunch activesync icon on the lower left quadrant of your pc. (You can also just open up the A/S program)
2. Select Connection Settings.
3. Uncheck the box labeled "Allow USB Connections" & then Click "OK".
4. Open MTTY & select "USB from the Port options drop down menu.
5. Select RTS/CTS from the Flow Control Settings & click "OK"
6. Pay attention, because for a brief mmoment MTTY wil report whether or not it could establish a port connection to USB. If you are successful, a Command window will open.
7. Hit the "Enter" key on your PC twice. You should then see a command prompt that looks like this "cmd>".
8. At the command prompt (cmd>) you should enter the command "boot".
This will reboot the device & report back about any errors or bad or erased blocks.
9. If your device was just hung, it should be fine after the reboot. If it returns to Boot Loader however, it means there was a problem with bad blocks.
10. If errors were reported & you end up back at the Boot Loader screen, then repeat the "Boot" Comand at the (cmd>) prompt.
Click to expand...
Click to collapse
and here is the thread that has a link to download mtty.
Make sure you follow the directions to the T... do NOT miss anything... take each step seriously.
to get mtty:
http://forum.xda-developers.com/showthread.php?t=371154

thesire said:
okay i think you are just hung after a bad flash and you can use mtty to reboot the os here are the instructions on how to do it:
and here is the thread that has a link to download mtty.
Make sure you follow the directions to the T... do NOT miss anything... take each step seriously.
to get mtty:
http://forum.xda-developers.com/showthread.php?t=371154
Click to expand...
Click to collapse
The link of the files MTTY to see 1.16.zip and MTTY see 1.42.zip, they have problems you have another link. Thank you.

Willgb said:
The link of the files MTTY to see 1.16.zip and MTTY see 1.42.zip, they have problems you have another link. Thank you.
Click to expand...
Click to collapse
okay i don't know why you having issue make sure you are logged into xda before downloading ... here is the link for 1.42

thesire said:
okay i don't know why you having issue make sure you are logged into xda before downloading ... here is the link for 1.42
Click to expand...
Click to collapse
After I give enter, in the item 7, the mtty is locked. He doesn't answer.

Willgb said:
After I give enter, in the item 7, the mtty is locked. He doesn't answer.
Click to expand...
Click to collapse
I entered in Mtty, I proceeded until appearing cmd >, when I type boot, price Command error!!!.
What to do of here for front?

Willgb said:
I entered in Mtty, I proceeded until appearing cmd >, when I type boot, price Command error!!!.
What to do of here for front?
Click to expand...
Click to collapse
make sure there are no spaces ... otherwise it won't work.

thesire said:
make sure there are no spaces ... otherwise it won't work.
Click to expand...
Click to collapse
I typed without spaces and the same thing happened.

Willgb said:
I typed without spaces and the same thing happened.
Click to expand...
Click to collapse
sigh... you ask for help in private message but even for just this simple instructions given by thesire and you can't follow! You shouldn't even tried to flash a ROM!! Try to work this out first because if you can't, no offense bro but I hope you still have warranty on your Kaiser

pfcsabre said:
sigh... you ask for help in private message but even for just this simple instructions given by thesire and you can't follow! You shouldn't even tried to flash a ROM!! Try to work this out first because if you can't, no offense bro but I hope you still have warranty on your Kaiser
Click to expand...
Click to collapse
The whole commands that were passed already executed and I didn't get progress, the problem is that wandered of program in the hour of updating and I also lost already the warranty. For the that I researched I need Rom Original ROM 3.29.422.1 Radiate 1.65.20.29. If it can help me, I thank. Thank you

Tilt Bricked
pfcsabre said:
sigh... you ask for help in private message but even for just this simple instructions given by thesire and you can't follow! You shouldn't even tried to flash a ROM!! Try to work this out first because if you can't, no offense bro but I hope you still have warranty on your Kaiser
Click to expand...
Click to collapse
I already tried to turn countless Roms and appears error 264. It is for this reason that I sent msg for you in the hope that you can help.
Thank you and excuse if I inconvenienced.

[TOOL] [for CDMA ONLY] Task 29 (format internal Memory) without drivers, without mtty

i thought of re doing doloop's modd for CDMA TP2
and here it is fully tested to be working
confirmation thnx to ziggy471: http://forum.xda-developers.com/showpost.php?p=6052356&postcount=97
now we can mtty our TP2 without having the need of MTTY and its drivers
INSTRUCTIONS:
- download and unzip
- put you favorite RADIO in the mix
- run then task29.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM
DOWNLOAD:
View attachment task29.zip
CREDIT:
all credit goes to doloop for coming up with the idea
doloop said:
Hi,
I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
As every one understand this command format the rom,
Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice.
After the phone reset itself, your old rom will be gone, so it won't boot: binfs has been formated, your phone memory is clean.
You'll need to power up in bootloader mode (press vol down right after power key), then use the leocustomruu.exe provided with your favorite rom package, or flash it from memory card using standard procedure.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1

Thanks SO much Agent_47 and ALSO Ziggy. I really wasn't familiar enough with all of this to know exactly what to send. Now we can KNOW that what is available to us has been tested and confirmed! You guys are great!

Thanks much agent47 and everyone involved!

why would you wanna format internal memory>

freexx89 said:
why would you wanna format internal memory>
Click to expand...
Click to collapse
Before you flash a new ROM, just to make sure all of the old files get deleted. If some old files are not deleted, they have a chance of creating hiccups with your freshly installed ROM (basically the new ROM cannot over-write, over-ride or remove the old files). This is meant to help with clearing your internal storage.

burtonsnow8 said:
Before you flash a new ROM, just to make sure all of the old files get deleted. If some old files are not deleted, they have a chance of creating hiccups with your freshly installed ROM (basically the new ROM cannot over-write, over-ride or remove the old files). This is meant to help with clearing your internal storage.
Click to expand...
Click to collapse
Ohh okay... make sense...

GaryMcQ said:
Thanks SO much Agent_47 and ALSO Ziggy. I really wasn't familiar enough with all of this to know exactly what to send. Now we can KNOW that what is available to us has been tested and confirmed! You guys are great!
Click to expand...
Click to collapse
It was kinda scary, but enough wine will allow you to do about anything. I figured the worst case was I had to go to the VZW store this morning and get a new one.
Z

Thank you for this agent_47.
Nice to see you here as well Z.

MordyT said:
Thank you for this agent_47.
Nice to see you here as well Z.
Click to expand...
Click to collapse
Amen Brother !
Great work guys!

why is it that everytime i try to run this, i get an error 240?? i tried everything, and i just cant get it to work.... please help me out someone...

raysaboy said:
why is it that everytime i try to run this, i get an error 240?? i tried everything, and i just cant get it to work.... please help me out someone...
Click to expand...
Click to collapse
Do you have HSLP?

What's HSLP?
Is this the Hard SPL unlocker? (So many acronyms... I'm trying to figure things out before I leap )

I am not sim unlocked (do have HSPL), so I can't flash a radio, can I still use this?

HELP
WTH....i flashed task 29 on tp2 ... and reflashed wolfs rom, and all it says its TOUCH PRO 2 when its turned on. How do i get out of this situation, because this task 29 thing isnt working to well

jlove85 said:
WTH....i flashed task 29 on tp2 ... and reflashed wolfs rom, and all it says its TOUCH PRO 2 when its turned on. How do i get out of this situation, because this task 29 thing isnt working to well
Click to expand...
Click to collapse
It won't boot because there is probably no radio. Manually put your phone in bootloader. Connect to p/c and flash radio.

___________________________
solved

Question
I'm Hard SPL unlocked, but not SIM unlocked. Can I still run Task 29 and flash a stock Sprint radio? I've been reading that I can't flash a radio to my TP2 unless I'm SIM unlocked?

Do I need a radio if I use Task29 or can I use the radio I had already on my TP2 which was the stock Sprint CDMA radio?
if I need a radio, where can I get the stock Sprint CDMA radio? Then do I perfom the setup in this manner?
1. Run Task29
2. Enter Bootloader
3. Flash new radio
4. Enter Bootloader
5. Flash new ROM
Thanks

Deltatristar500 said:
Do I need a radio if I use Task29 or can I use the radio I had already on my TP2 which was the stock Sprint CDMA radio?
if I need a radio, where can I get the stock Sprint CDMA radio? Then do I perfom the setup in this manner?
1. Run Task29
2. Enter Bootloader
3. Flash new radio
4. Enter Bootloader
5. Flash new ROM
Thanks
Click to expand...
Click to collapse
sounds about right
here are some stock radios
http://forum.ppcgeeks.com/showthread.php?t=9034

may b i might sound like a noob but want sumone to throw a light on this.
i have a sprint cdma tp2 n its is sim unlocked. i m using it with a gsm sim,
i wanna know tat if i do task 29 n update any radio will it lock my phone,
which radio can i try..

"starting services" does not stop...on boot up

Hi all , just joined xda-developers but i spend straight 14 hours trying to fix this DAMM photon q yesterday
all i got in the end is a normal boot after following this http://forum.xda-developers.com/showthread.php?t=2001108
BUT at the startup , the screen comes like for a millisecond and then this " starting services" logo doesn't go at all...it just continues forever
any help would be appreciate .

Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.

arrrghhh said:
Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.
Click to expand...
Click to collapse
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..

tune345 said:
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..
Click to expand...
Click to collapse
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!

arrrghhh said:
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!
Click to expand...
Click to collapse
i think i am a noob at explaining things but let me try again...i don't know the exact history of this phone , my friend gave it to me yesterday and its not stolen ... he paid his insurance every month but then who know what he did... i have no idea why its not qaulified for the official unlock probably because he bought a new phone on the same line so the company deactivated this phone..
ok so when i got the phone yesterday , the bootlocker logo appeared and i was unable to do anything ...then i installed CWMrecovery and it was successfull and then i installed every possible rom available online as far as i know but same thing happened with all of them ..... successfully installed , it reboots and little square thing saying " starting services..." and then it does not go away at all ... but at the same time i am able to bring the top menu ..and go to the settings and everything from there but i can't go to home screen since ...it is black and is occupied by "starting services.."
so finally i came accross this thread for master reboot and i followed it ....i installed TWRrecovery and made backup and then restored a backup providers by that guy ... i flashed new stock recovery after that... so following his thread , he told that if all went successful ... it will return to original stock
and now i am at the same screen as previous... " starting serivces..." my friend told me he tired to root it and he messed up really bad ..so i believe there is still some old files in the internal storage from previous rom versions.... but i deleted everything......wiped, data facotry reset and then
installed a clean backup provided by the thread starter...... and everyone else had success except me ...
i hope i answered your questions if not .. i would aprreciate if you tell me what exactly you want to know ..... thanks

i also tired every US ROMS from here http://sbf.droid-developers.org/asanti_c/list.php
and all of them showed " starting services.." after i installed them from sdcard using CWMrecovery.

we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader

Rangerbry said:
we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader
Click to expand...
Click to collapse
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip

tune345 said:
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip
Click to expand...
Click to collapse
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD

Rangerbry said:
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
ok i will do it right now...give me 1 minute

Woooooooooooooooooooooooooooooooo ..... DUDE YOU SAVED ME FROM GOING INSANE lol ....thanks
its working now ... i did that yesterday but my dumbass was choosing the whole zip file without extraction haha...
but the questing is which is the lastest update for it ??

If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD

Rangerbry said:
If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??

tune345 said:
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??
Click to expand...
Click to collapse
You should be able to and everything should function its a complete stock just as sprint flashed it
Sent from my GT-N8013 using Tapatalk HD

is there any other way around for bootlocker ...without official ??
Thank you so much Rangerbry.........

If you Flashed CWM and TWRP your bootloader is already unlocked

Rangerbry said:
If you Flashed CWM and TWRP your bootloader is already unlocked
Click to expand...
Click to collapse
This.
Glad you got it workin with RSD lite.

Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?

tune345 said:
Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?
Click to expand...
Click to collapse
For bootlogos: http://forum.xda-developers.com/showthread.php?t=1873834
Reactivate in Sprint? What do you mean? Only Sprint can tell you whether the phone can be activated or not. Call them. Not sure why you would even worry about that if it's not stolen.....

Ok I think I will go in store and see what happens...
Ok I have this anither problem now....batteryy life is very short..I charged in the morning and after straight 3 hours.of use its out ..from 96 ,%
M looking into market ...can someone throw some light on battery calibration ...mine phone is not rooted
Sent from my XT897 using xda app-developers app