1. Awhile ago I used Hard-SPL on my phone. If I hard reset my phone. Will I have to Hard-SPL again?
2. About ROM's I remember when I flashed a rom awhile back ago, I did it through MiniSD card. Can all ROM's be flashed through minisd? I've only flashed it once, so I wouldn't know.
3. Do I need to plug my phone onto my computer to flash the radio?
DVS_WiNdz said:
1. Awhile ago I used Hard-SPL on my phone. If I hard reset my phone. Will I have to Hard-SPL again?
2. About ROM's I remember when I flashed a rom awhile back ago, I did it through MiniSD card. Can all ROM's be flashed through minisd? I've only flashed it once, so I wouldn't know.
3. Do I need to plug my phone onto my computer to flash the radio?
Click to expand...
Click to collapse
1 No its a once only type deal...
2 Sorry cant help you there
3 I am also not sure if it can be done via the sd card sorry...
yes, you can flash through microsd, radio/os/splash screen it doesn't matter.
XtreMe_G said:
yes, you can flash through microsd, radio/os/splash screen it doesn't matter.
Click to expand...
Click to collapse
How do I flash radio through SD card? I tried downloading one and it is a exe file that I open on my PC..
I've tried downloading a few ROMs too and they are .exes
Anyone know which ROMs and Radios I can install through SD card?
there is a procedure on how to do it...please search. It's somewhere around. Maybe even a sticky.
thomassster said:
there is a procedure on how to do it...please search. It's somewhere around. Maybe even a sticky.
Click to expand...
Click to collapse
Okay.. got it.
I would reccomend you just use a computer. Safer and secure. But good luck on your journey thou of flashing.
deviusdragger said:
I would reccomend you just use a computer. Safer and secure. But good luck on your journey thou of flashing.
Click to expand...
Click to collapse
The safer part is debatable. It may be safer if you ise a UPS device. Otherwise a laptop or MicroSD may be "safer"
deviusdragger said:
I would reccomend you just use a computer. Safer and secure. But good luck on your journey thou of flashing.
Click to expand...
Click to collapse
My USB port on my Kaiser is damaged, so I am unable to do flash it through PC.
Shadowdh said:
1 No its a once only type deal...
Click to expand...
Click to collapse
Okay.. good because I can't do a Hard-SPL again..
Related
i have downloaded the tnt cab file & coppied them to windows is that correct or were must i place the to install ?
??? You must click on the cabs to install it in WMobile.
have tried (setup in cabs)
jacknjill said:
??? You must click on the cabs to install it in WMobile.
Click to expand...
Click to collapse
the cab shows it is installed but the program dose not run.
The Cabs...
Try Copying the cabs in my documents folder. and afer that , go using the file manager and run them. that should work
did you reboot?
i have just done that bet still the same have softreset & booted again but no programs.
Robertnam said:
am i stupid or what
Click to expand...
Click to collapse
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
dharvey4651 said:
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
Click to expand...
Click to collapse
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
asctony said:
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom. will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
neva dinova said:
asctony said:
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom.
No, I have not tried forcing my MDA into bootlader and loading a new rom. Not sure what to do?
will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
My 4 PCs recognize the MDA as a Windows Mobile device, but AS will not connect.
Have uninstalled and reinstalled all versions of AS from 4.1 - 4.5.
Thanks for your input and time. I do appreciate it.
Click to expand...
Click to collapse
swingheim said:
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Click to expand...
Click to collapse
I'll go with "stupid" too
oscarillo said:
I'll go with "stupid" too
Click to expand...
Click to collapse
Please guys, I am asking nicely now. This is not a place to insult other people.
Just answer questions if you know the answer or don't bother at all if you don't want to help.
NOTES :
In order to upgrade a ROM, you'll need a PC with ActiveSync installed and an USB cable to connect them
There is the possibility to flash from SD card but that is only in emergency cases, and it's not recommended. Plus i don't know if it will work unless the SD Image isn't your own.
I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
I cant even SD flash the new ROM from bootloader with a clean fat32 formatted card
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Have you rebooted your PC ???????
kareem9nba said:
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Click to expand...
Click to collapse
LOL... ok im trying everything right now... rebooted PC... and did another hard reset to phone but says device is not functioning WTF...
You are using WMDC instead of AS correct?
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
kareem9nba said:
You are using WMDC instead of AS correct?
Click to expand...
Click to collapse
yeah everything is up to date this just started after i did a hard reset
phantomy2g said:
I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
Click to expand...
Click to collapse
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Hi, Had the same with this rom, just keep on trying to connect, did you also remove the battery and perform a soft reset? I flashed another rom and everything is perfect again. I could not find anything wrong but it took me some time to solve this....
phantomy2g said:
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
Click to expand...
Click to collapse
Which bugs?
skatdawg said:
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Click to expand...
Click to collapse
My bad man but this is really frustrating as ive been on it for the last 5 hours and trying several methods
kareem9nba said:
Which bugs?
Click to expand...
Click to collapse
I read something somewhere about something resetting
Is it possible to flash ROMs without using a USB cable. Currently I am getting an error "USB Device Not Recogized". I have tried 5 different cables and both a Vista and XP pc. Get the same message.
I currently have IBI 107b installed and I started having this and freezing problems after flashing to this ROM.
I am able to connect to the PC via BT but not USB. So I can transfer files and cabs to the phone(tilt).
Is there a way for me to flash to a different ROM? Should I use the SD card method or is there another way to flash?
I am at a loss as to what to do. Please, any assistance would be appreciated.
search flashing via bootloader sdcard method
Thanks - just needed a direction.
spl flashing sdcard
But, if I need flashing a new spl, to recuper a bricked phone, how to make this? I need a kaisdiag.nbh signed, but how to make this *.nbh file?
spl or hard spl flashing requires a ppc os + jump spl /sspl + usb support
u cant do this from sd card in other way
Erivelton said:
But, if I need flashing a new spl, to recuper a bricked phone, how to make this? I need a kaisdiag.nbh signed, but how to make this *.nbh file?
Click to expand...
Click to collapse
FYI, I'm still working on a SSPL which doesn't need USB and is run from a SD card.
fmg9800 said:
Thanks - just needed a direction.
Click to expand...
Click to collapse
LMAO. Here http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash. It is from sticky thread above.
jockyw2001 said:
FYI, I'm still working on a SSPL which doesn't need USB and is run from a SD card.
Click to expand...
Click to collapse
Woohoo.. this is just what I need.
that will be the ultimate tool for flashing
---
we will look for this - can we get further information about its mechanism
jockyw2001 said:
FYI, I'm still working on a SSPL which doesn't need USB and is run from a SD card.
Click to expand...
Click to collapse
jockyw2001 said:
FYI, I'm still working on a SSPL which doesn't need USB and is run from a SD card.
Click to expand...
Click to collapse
Great guy!!!! We look forward for this novelty!
I flashed a new ROM on my fuze and after turning it on- it just gets stuck on the start screen! It says
Smart Mobility
Test Only
Not for Sale
And then i says the following on the right bottom corner:
R 1.02.25.32
G 52.39c.25.22
D 1.95.00.00
And the following on the left bottom corner:
U
I did a hard reset three times but it is still stuck~!! PLEASE HELP ME OUT!
prateeksach said:
I flashed a new ROM on my fuze and after turning it on- it just gets stuck on the start screen! It says
Smart Mobility
Test Only
Not for Sale
And then i says the following on the right bottom corner:
R 1.02.25.32
G 52.39c.25.22
D 1.95.00.00
And the following on the left bottom corner:
U
I did a hard reset three times but it is still stuck~!! PLEASE HELP ME OUT!
Click to expand...
Click to collapse
Reflash, basically same thing happened to me on my first flash...what rom did u use? etc etc, try another rom
meth0dGSX said:
Reflash, basically same thing happened to me on my first flash...what rom did u use? etc etc, try another rom
Click to expand...
Click to collapse
I want to do that! But since it wont turn on, I cant connect it through active sync or the WMDC, so i cant flash a new rom!!! Is there some other way????? PLEASE HELPPPPP
Did you follow the instructions and do the Hard SPL first? you can flash from the bootloader or a SD card, read up before u go flashing
meth0dGSX said:
Did you follow the instructions and do the Hard SPL first? you can flash from the bootloader or a SD card, read up before u go flashing
Click to expand...
Click to collapse
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
prateeksach said:
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=448008
http://forum.xda-developers.com/showthread.php?t=410150
prateeksach said:
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
Click to expand...
Click to collapse
Did you confirm it was un-locked? If you do not know what bootloader is you need to go the Wiki and definitely read up some more....you should not have flashed without reading that thoroughly....after enter bootloader and confirm if it is un-locked and then you can proceed...
Now i know all the stuff! I checked the bootloader and stuff i have a hard SPL and now im going to flash a new rom from sd card! hope it works!
prateeksach said:
Now i know all the stuff! I checked the bootloader and stuff i have a hard SPL and now im going to flash a new rom from sd card! hope it works!
Click to expand...
Click to collapse
You should be good to go then....
wow, I'm surprised so many people don't flash via SD.. only way to go in my opinion.. otherwise just asking for trouble eventually
Black6spdZ said:
wow, I'm surprised so many people don't flash via SD.. only way to go in my opinion.. otherwise just asking for trouble eventually
Click to expand...
Click to collapse
Why asking for trouble? I've been flashing via PC for so long, so many times (cooked firmware and radio), on so 4 devices.. I have not encountered a brick ever. in fact, most of the issues you can just go into bootloader mode and reflash again..
I did it and it worked! This is a way easier method! I like it!!! BUT I STILL HATE MY PHONE cause I had a G1 last week and it got stolen! I hate it when that happens. I only got to use it for one week! Some B***H stole it!
Hi,
i just posted this in the original thread, but i need quick help so i post it here too.
i flashed a batterymod like it is writen here.
But now my phone is just rebooting and rebooting. I need to take out the battery to stop it.
The phone is s-off and rooted. Is there any way to fix this .
Or do i have to do a hardreset???
Please help
thanks,
germanHD
germanHD said:
Hi,
i just posted this in the original thread, but i need quick help so i post it here too.
i flashed a batterymod like it is writen here.
But now my phone is just rebooting and rebooting. I need to take out the battery to stop it.
The phone is s-off and rooted. Is there any way to fix this .
Or do i have to do a hardreset???
Please help
thanks,
germanHD
Click to expand...
Click to collapse
Try going into recovery and all wiping data
If that don't work reflash Ur Rom and u will be good to go.
Sent from my HTC Sensation XE with Beats Audio using xda premium
Ok, thx for the quick help.
1st step didnt help. Wiping all data didnt work
How do i reflash my Rom? it´s still the original 1?
Factory reset? Factoryreset didnt work either ((
germanHD said:
Ok, thx for the quick help.
1st step didnt help. Wiping all data didnt work
How do i reflash my Rom? it´s still the original 1?
Factory reset? Factoryreset didnt work either ((
Click to expand...
Click to collapse
Well first off you need to read then search then read some more.
Read this
http://forum.xda-developers.com/showthread.php?t=1192300
Find a custom or stock rom here.
http://forum.xda-developers.com/showthread.php?t=1200403
Read buddy plz dont go around just asking questions. At the level your at 99% of what you have to ask is already answered.
Sorry if u didnt get my questions right.
It´s maybe because of my english.
I know how to flash a rom.
the only problem is, that this rom needs to be on the sd-card.
But i dont have access to my sd-card.
So i gotta find a way to get access to my card anyhow. I maybe need an adapter for my pc to copy a rom on the sd-card.
But thx, for your quick reply.
germanHD
Does Windows pick up your phone as a device?
You may be able to get to the SD card from there - or failing that maybe you can reinstall the RUU file?
Hi,
no it dont get it as device. But i just called a friend, he will bring his phone and we try it this way.
thx
germanHD said:
Hi,
no it dont get it as device. But i just called a friend, he will bring his phone and we try it this way.
thx
Click to expand...
Click to collapse
Good luck - hope you get sorted
I finally brought it back to work.
I managed to copy a ROM on my sd-card with another phone.
Thx
germanHD
You could also remove your memory card, put it in an adapter and attach it direct to your PC then put the rom on the SD card that way. The in recovery you should be able to install from the SD card...this assumes of course that recovery can see the SD card. If not, bigger problems lol
germanHD said:
How do i reflash my Rom? ((
Click to expand...
Click to collapse
This is the reason i posted those two links for you. The question was how do i reflash my rom? The links gave those answers... There was no mention at all of your sd card. Glad your up and running now