i thought of re doing doloop's modd for CDMA TP2
and here it is fully tested to be working
confirmation thnx to ziggy471: http://forum.xda-developers.com/showpost.php?p=6052356&postcount=97
now we can mtty our TP2 without having the need of MTTY and its drivers
INSTRUCTIONS:
- download and unzip
- put you favorite RADIO in the mix
- run then task29.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM
DOWNLOAD:
View attachment task29.zip
CREDIT:
all credit goes to doloop for coming up with the idea
doloop said:
Hi,
I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
As every one understand this command format the rom,
Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice.
After the phone reset itself, your old rom will be gone, so it won't boot: binfs has been formated, your phone memory is clean.
You'll need to power up in bootloader mode (press vol down right after power key), then use the leocustomruu.exe provided with your favorite rom package, or flash it from memory card using standard procedure.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1
Thanks SO much Agent_47 and ALSO Ziggy. I really wasn't familiar enough with all of this to know exactly what to send. Now we can KNOW that what is available to us has been tested and confirmed! You guys are great!
Thanks much agent47 and everyone involved!
why would you wanna format internal memory>
freexx89 said:
why would you wanna format internal memory>
Click to expand...
Click to collapse
Before you flash a new ROM, just to make sure all of the old files get deleted. If some old files are not deleted, they have a chance of creating hiccups with your freshly installed ROM (basically the new ROM cannot over-write, over-ride or remove the old files). This is meant to help with clearing your internal storage.
burtonsnow8 said:
Before you flash a new ROM, just to make sure all of the old files get deleted. If some old files are not deleted, they have a chance of creating hiccups with your freshly installed ROM (basically the new ROM cannot over-write, over-ride or remove the old files). This is meant to help with clearing your internal storage.
Click to expand...
Click to collapse
Ohh okay... make sense...
GaryMcQ said:
Thanks SO much Agent_47 and ALSO Ziggy. I really wasn't familiar enough with all of this to know exactly what to send. Now we can KNOW that what is available to us has been tested and confirmed! You guys are great!
Click to expand...
Click to collapse
It was kinda scary, but enough wine will allow you to do about anything. I figured the worst case was I had to go to the VZW store this morning and get a new one.
Z
Thank you for this agent_47.
Nice to see you here as well Z.
MordyT said:
Thank you for this agent_47.
Nice to see you here as well Z.
Click to expand...
Click to collapse
Amen Brother !
Great work guys!
why is it that everytime i try to run this, i get an error 240?? i tried everything, and i just cant get it to work.... please help me out someone...
raysaboy said:
why is it that everytime i try to run this, i get an error 240?? i tried everything, and i just cant get it to work.... please help me out someone...
Click to expand...
Click to collapse
Do you have HSLP?
What's HSLP?
Is this the Hard SPL unlocker? (So many acronyms... I'm trying to figure things out before I leap )
I am not sim unlocked (do have HSPL), so I can't flash a radio, can I still use this?
HELP
WTH....i flashed task 29 on tp2 ... and reflashed wolfs rom, and all it says its TOUCH PRO 2 when its turned on. How do i get out of this situation, because this task 29 thing isnt working to well
jlove85 said:
WTH....i flashed task 29 on tp2 ... and reflashed wolfs rom, and all it says its TOUCH PRO 2 when its turned on. How do i get out of this situation, because this task 29 thing isnt working to well
Click to expand...
Click to collapse
It won't boot because there is probably no radio. Manually put your phone in bootloader. Connect to p/c and flash radio.
___________________________
solved
Question
I'm Hard SPL unlocked, but not SIM unlocked. Can I still run Task 29 and flash a stock Sprint radio? I've been reading that I can't flash a radio to my TP2 unless I'm SIM unlocked?
Do I need a radio if I use Task29 or can I use the radio I had already on my TP2 which was the stock Sprint CDMA radio?
if I need a radio, where can I get the stock Sprint CDMA radio? Then do I perfom the setup in this manner?
1. Run Task29
2. Enter Bootloader
3. Flash new radio
4. Enter Bootloader
5. Flash new ROM
Thanks
Deltatristar500 said:
Do I need a radio if I use Task29 or can I use the radio I had already on my TP2 which was the stock Sprint CDMA radio?
if I need a radio, where can I get the stock Sprint CDMA radio? Then do I perfom the setup in this manner?
1. Run Task29
2. Enter Bootloader
3. Flash new radio
4. Enter Bootloader
5. Flash new ROM
Thanks
Click to expand...
Click to collapse
sounds about right
here are some stock radios
http://forum.ppcgeeks.com/showthread.php?t=9034
may b i might sound like a noob but want sumone to throw a light on this.
i have a sprint cdma tp2 n its is sim unlocked. i m using it with a gsm sim,
i wanna know tat if i do task 29 n update any radio will it lock my phone,
which radio can i try..
Related
I flashed a new ROM on my fuze and after turning it on- it just gets stuck on the start screen! It says
Smart Mobility
Test Only
Not for Sale
And then i says the following on the right bottom corner:
R 1.02.25.32
G 52.39c.25.22
D 1.95.00.00
And the following on the left bottom corner:
U
I did a hard reset three times but it is still stuck~!! PLEASE HELP ME OUT!
prateeksach said:
I flashed a new ROM on my fuze and after turning it on- it just gets stuck on the start screen! It says
Smart Mobility
Test Only
Not for Sale
And then i says the following on the right bottom corner:
R 1.02.25.32
G 52.39c.25.22
D 1.95.00.00
And the following on the left bottom corner:
U
I did a hard reset three times but it is still stuck~!! PLEASE HELP ME OUT!
Click to expand...
Click to collapse
Reflash, basically same thing happened to me on my first flash...what rom did u use? etc etc, try another rom
meth0dGSX said:
Reflash, basically same thing happened to me on my first flash...what rom did u use? etc etc, try another rom
Click to expand...
Click to collapse
I want to do that! But since it wont turn on, I cant connect it through active sync or the WMDC, so i cant flash a new rom!!! Is there some other way????? PLEASE HELPPPPP
Did you follow the instructions and do the Hard SPL first? you can flash from the bootloader or a SD card, read up before u go flashing
meth0dGSX said:
Did you follow the instructions and do the Hard SPL first? you can flash from the bootloader or a SD card, read up before u go flashing
Click to expand...
Click to collapse
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
prateeksach said:
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=448008
http://forum.xda-developers.com/showthread.php?t=410150
prateeksach said:
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
Click to expand...
Click to collapse
Did you confirm it was un-locked? If you do not know what bootloader is you need to go the Wiki and definitely read up some more....you should not have flashed without reading that thoroughly....after enter bootloader and confirm if it is un-locked and then you can proceed...
Now i know all the stuff! I checked the bootloader and stuff i have a hard SPL and now im going to flash a new rom from sd card! hope it works!
prateeksach said:
Now i know all the stuff! I checked the bootloader and stuff i have a hard SPL and now im going to flash a new rom from sd card! hope it works!
Click to expand...
Click to collapse
You should be good to go then....
wow, I'm surprised so many people don't flash via SD.. only way to go in my opinion.. otherwise just asking for trouble eventually
Black6spdZ said:
wow, I'm surprised so many people don't flash via SD.. only way to go in my opinion.. otherwise just asking for trouble eventually
Click to expand...
Click to collapse
Why asking for trouble? I've been flashing via PC for so long, so many times (cooked firmware and radio), on so 4 devices.. I have not encountered a brick ever. in fact, most of the issues you can just go into bootloader mode and reflash again..
I did it and it worked! This is a way easier method! I like it!!! BUT I STILL HATE MY PHONE cause I had a G1 last week and it got stolen! I hate it when that happens. I only got to use it for one week! Some B***H stole it!
Hi guys!!
I'm really desperate.
Today I installed copilot 8, after a while the phone when goes in standby doesn't wake up anymore. When I press the menu button it remains down.
So I tried to reflash myhero 1.1.2 but in vain, and if I try to wipe I get the boot loop on hero logo.
The rotation doesn't work.
Please help me!!!!
Format your ext partition, wipe and flash again.
I use copilot 8 and the same ROM and I haven't that kind of issues on the full version of myhero v1.1.2! On a previous version on the 2.6.29 kernel when never I closed the copilot 8 the system crashed. Then I flashed the red's HTC kernel 2.6.27 and the issue never happened to me again. On this new version, the GPS is working fine for me! I just installed a fresh and clean ROM..
Do you deleted the save folder on the copilot 8, before re-installing the app or it was a fresh install? Is mandatory whenever you re-install the app.
When you install it, be sure you don't have this folder, no matter what is the situation!
Edit: I didn't read the second part of your issue.. Evil is right.. no other solution
It was the first install!
It can be a kernel problem?
Evil, when I try to wipe it goes in loop with the hero logo, do you think that formatting will work?
eViL D: said:
Format your ext partition, wipe and flash again.
Click to expand...
Click to collapse
I did it!
I also tried to change kernel with the three different versions but the problem is still alive!!!
Something new?
daeron666 said:
Something new?
Click to expand...
Click to collapse
I had this prob too.. after my micr sd card was set as damaged by the android sys and i wasn't able to start the device as well. But, the device was able to boot without the microsd card. Try it too. If so backup the information in your pc and format and remove the partitions of the microsd card (if you didn't do it before)!
I tried it, but the bug remains, I think it's something in the OS...
daeron666 said:
I tried it, but the bug remains, I think it's something in the OS...
Click to expand...
Click to collapse
My friend, the best solution is really to try it..install other rom, just for testing! ,,at least to have something to work on it.. step by step.. I use the same ROM, the newest version of copilot (and I previously was with olders ones without prob too), swapper, overclock, 2.6.29 red's kernel (without BFS), Engineered SPL, no radio changes, bla bla..
Gives a description of what is the state of your gear..
I already started to think that it can happen that some piece of hardware on the device is broken, but lets see.. no false alarms,,
Let's try to understand the status!
Of course! I have a 32a with no radio update, engineering spl 2010 and .29 kernel bfs. I Aldo tried without bfs but in vain.
The last thing left to do is trying another ROM....but there's a low level formatting method?
daeron666 said:
Of course! I have a 32a with no radio update, engineering spl 2010 and .29 kernel bfs. I Aldo tried without bfs but in vain.
The last thing left to do is trying another ROM....but there's a low level formatting method?
Click to expand...
Click to collapse
If there is, it was never spoken here.. the only way I see the internal phone partitions formating is when applying a new room...
Remove the sdcard/copilot directory and reinstall copilot
OR
Format your SDcard and reinstall copilot
Amon_RA said:
Remove the sdcard/copilot directory and reinstall copilot
OR
Format your SDcard and reinstall copilot
Click to expand...
Click to collapse
My friend, I think he tried that!
ricardomega said:
My friend, I think he tried that!
Click to expand...
Click to collapse
Yes of course, I tried that!
I also tried several roms, but nothing changes!
What can I do?
I'm really desperate.
daeron666 said:
Yes of course, I tried that!
I also tried several roms, but nothing changes!
What can I do?
I'm really desperate.
Click to expand...
Click to collapse
But without the copilot no issues, right? I'm using the copilot v8.0.0.328 kfc3.0 and you??
Excuse me, I'll explain better:
The problem is ALWAYS, with or without copilot, with or without sd...
daeron666 said:
Excuse me, I'll explain better:
The problem is ALWAYS, with or without copilot, with or without sd...
Click to expand...
Click to collapse
No need for excuses.. Man, "just" in my opinion.. you might have some broken hardware on your device.. I can't find any other answer. Flash back everything original like it should be and send it to warranty. There's SPL collections, there's original ROM's from HTC, etc etc..
I'm sorry.. I'm unable to help you.. Maybe someone has other idea, or something, but in opinion you a broken device..
Hello all
I downloaded the new ROM from the TW HTC site some minutes ago and proceed with flashing some time thouought the FLASH the pfone gave an error "Checking Custom ID"
"Update Failed"
And Android Update says ERROR 131 CUSTOMER ID ERROR
Now I can do nothing! The phone goes into HBOOT 1.76.0007 and I have a big icon with a memory chip on the bottom of the screen!
Pleace help me restore the hboot and recovery roms! The rest I'll menage.
same error..
You cant flash the update, don't do it.
Eugene is having a 32B ROM done and i belive he is uploading it atm.
32A users will soon have a flashable ROM.
WebghostDK said:
You cant flash the update, don't do it.
Eugene is having a 32B ROM done and i belive he is uploading it atm.
32A users will soon have a flashable ROM.
Click to expand...
Click to collapse
And for the ones that did it?
Great, i flashed my 32A via fastboot, and now im stuck in some strange state... I think i might have gotten a corrupt radio on it somehow...
Epedemic said:
Great, i flashed my 32A via fastboot, and now im stuck in some strange state... I think i might have gotten a corrupt radio on it somehow...
Click to expand...
Click to collapse
Yup it seems that way, as it now always hangs when flashing radio (trying a official 2.17 upgrade) grr...
Epedemic said:
Yup it seems that way, as it now always hangs when flashing radio (trying a official 2.17 upgrade) grr...
Click to expand...
Click to collapse
Yes. Cause you flashed a new HBoot.
You should wait, while romcookers will find way to downgrade new hboot
or repacked rom to flash properly to all customers, not only taiwanese.
I think it is time to clear things out:
DO NOT FLASH / UPDATE THIS ROM TO YOUR DEVICES!!!! - This means: Wait for someone to release correct ROM Updates to your devices. This official update is ONLY for TW devices. When you decide to flash something to your devices you should be very sure that you are not doing a stupid move! If someone tells you not to do it then you should hear that! Flashing something isn't like dressing a tshirt, and this means that if you choose a wrong size tshirt you can always take it off and dress another that fits you right. Flashing something that doesn't fit your device can easily brick it! Be aware!
5[Strogino] said:
Yes. Cause you flashed a new HBoot.
You should wait, while romcookers will find way to downgrade new hboot
or repacked rom to flash properly to all customers, not only taiwanese.
Click to expand...
Click to collapse
Indeed. I thought i was safe cause i flashed the files (boot.img, radio.img and system.img (which failed) via fastboot... Guess not... So now im stuck at the same screen with the cross over the ram chip
joaosousa said:
I think it is time to clear things out:
DO NOT FLASH / UPDATE THIS ROM TO YOUR DEVICES!!!! - This means: Wait for someone to release correct ROM Updates to your devices. This official update is ONLY for TW devices. When you decide to flash something to your devices you should be very sure that you are not doing a stupid move! If someone tells you not to do it then you should hear that! Flashing something isn't like dressing a tshirt, and this means that if you choose a wrong size tshirt you can always take it off and dress another that fits you right. Flashing something that doesn't fit your device can easily brick it! Be aware!
Click to expand...
Click to collapse
Yes we already know this! But it is too late! So please tell us how to fix the mess we have created!
I agree don't do stupid things in excitement. If you have eng spl etc by flashing all imgs )boot, radio etc) you may brick your device, so please please be careful wait for a update.zip file from greats mods like drizzy, eugene etc.
Once again I want to point that the purpose of this thread is help theese of us that DID the flash NOT knowing that it will NOT work!
OrionBG said:
Yes we already know this! But it is too late! So please tell us how to fix the mess we have created!
Click to expand...
Click to collapse
In my understanding the only thing you can do is to wait the official htc EU flasher (HTC said around mid November) and see if it's able to replace everything loading a proper radio/spl on the bricked device, acting on a lower level.
Otherwise you would just keep that expensive plastic brick ...
I am sorry, i was also eager to upgrade, but if HTC let you download their flasher only with a proper TW serial number, and if they've already advertised that you need to wait 2 or 3 weeks more for european firmware, then there should be a reason: so I didn't.
Hope you will be able to fix, but I am not too confident: guess you will need service.
It's ALIVE!!!! I have no idea how or why, but after tons of failed attempts and failed fastboot commands i now have the 3.03 update on my scandinavian 32a which i thought was bricked!
Epedemic said:
It's ALIVE!!!! I have no idea how or why, but after tons of failed attempts and failed fastboot commands i now have the 3.03 update on my scandinavian 32a which i thought was bricked!
Click to expand...
Click to collapse
Good. Now please write everything, what you did to get device alive)
5[Strogino] said:
Good. Now please write everything, what you did to get device alive)
Click to expand...
Click to collapse
yes yes post it please
i have no idea what actually did it, but it is possible that it was because i did a adb logcat command while the 3.03 update was running..
I can see that i have the 1.76 spl, and the new radio (which kept failing on me before)
i have try now to do adb logcat while update is running, but adb continuos stay in waiting for device, or say adb server is out to date ecc
Epedemic said:
i have no idea what actually did it, but it is possible that it was because i did a adb logcat command while the 3.03 update was running..
I can see that i have the 1.76 spl, and the new radio (which kept failing on me before)
Click to expand...
Click to collapse
Strange thing... adb logcat simply outputs log into console... How outputing logs can affect to flashing properly?
p.s. please post your full SPL-info too.
p.p.s. I think we need get right order to flashing this update. You tried to flash images via fastboot. What order do you have at first (boot - 1, radio - 2, system -3)?
What did you do at last?
i can't accesso to fastboot mode beacuse the phone stay in RUU USB ..
!!!! ROOTING/FLASHING/DOWNGRADING IS ALWAYS ON YOUR OWN RISK !!!!
Attention: This method will completely wipe your phone!!!
You can find the reworked Tutorial here: http://android-tutorials.org/
Video of the first step is online: Step 1
Video of the 3 & 4 step is online: Step 3 & 4
Known Problems
If you have problems while re-rooting or custom recovery (unrevoke) try to downgrade again with the above procedure.
Make sure you have made a new goldcard.
If you have problems e.g. 140 ERROR please follow these instructions (thx to raz2133)
This will fix your MISC Partition so you can flash back original RUU files.
Happy re-rooting
P.S. i hope you can understand this because english is not my foreign language
Great News!
Im not Root-Bricked ^^ but someone else will be happy with it =)
Edit: Why is 1 Pic from July and one from March!? And different times.
Thank you!!!
Maybe you should add: this wipes your device...
This is great, keep up the good work! =)
Edit: Are we sure those that do not have a carrier locked/branded also needs to create a goldcard?
Nitrius said:
This is great, keep up the good work! =)
Edit: Are we sure those that do not have a carrier locked/branded also needs to create a goldcard?
Click to expand...
Click to collapse
Not sure about that. i had a branded Vodafone version and unbranded it.
If someone could try without goldcard and report here
xtcislove said:
Edit: Why is 1 Pic from July and one from March!? And different times.
Click to expand...
Click to collapse
That was when the bootloader was built, not the current time.
sorch said:
That was when the bootloader was built, not the current time.
Click to expand...
Click to collapse
Ah thanks ! Dont know this =)
I hope this will work on generic devices that are not branded...
Sammy83 said:
For everyone how was in bad luck and updated to the original OTA FroYo here is a way how you can revert it.
The User maximini1 has found a thread where they describe how you can downgrade to 0.80 again.
So i try to explain how you have to do it.
Preparation
1. Make a NEW Goldcard (here)
2. Download PB99IMG.zip (here - MIRROR - germany MIRROR2)
3. Rename the downloaded file to "PB99IMG.zip" and copy it onto your SD Card.
Flashing
1. Shutdown yor mobile
2. Hold Volume up and press power
3. wait until PB99IMG.zip was found and checked
4. Press Volume Up <yes> - PICTURE 1
5. Wait until all steps are done. DON't POWER OFF YOUR DEVICE!!! - PICTURE 2
6. After flashing press Volume Up to reboot
7. done
Happy re-rooting
Click to expand...
Click to collapse
Is it working? Did try anyone?
Sammy83 said:
Not sure about that. i had a branded Vodafone version and unbranded it.
If someone could try without goldcard and report here
Click to expand...
Click to collapse
Looks like it's possible for those with an unbranded/unlocked phone:
mbroeders said:
First of all, I have an unbranded simlock-free phone. All I did was
1. download the file to SD card.
2. rename to PB99IMG.zip
3. boot into recovery (turn phone on while holding down volume)
4. just let it load the zip file and press yes when asked to install
Easy as that!
Click to expand...
Click to collapse
SharpSA said:
Is it working? Did try anyone?
Click to expand...
Click to collapse
Yes working 100%
Ok, I never rooted my android before and I have the OTA 2.2 Froyo update on an unbranded Desire. After I complete these steps, what do I need to do to install a custom rom?
Thanks!
Wheezy_be said:
Ok, I never rooted my android before and I have the OTA 2.2 Froyo update on an unbranded Desire. After I complete these steps, what do I need to do to install a custom rom?
Thanks!
Click to expand...
Click to collapse
Root your phone with unrevoked, using on of these guides for example:
Linux:
http://myhtcdesire.com/modding/how-to-root-your-desire-easily-method-1
Windows:
http://myhtcdesire.com/modding/how-to-root-your-desire-easily-method-2
Ok for the dumb and ignorant among us (a.k.a me) what state does this leave your phone in.
I get I downgrade HBOOT to 0.80 and my phone will be wiped, but what ROM will be on the phone after the downgrade will it still be the OTA rom or will it be another one?
Or do I then need to install a ROM of my choice after the downgrade, sorry if this is a really stupid question, I haven't put any custom ROM on my Desire yet and then I got the OTA update as I was thinking about checking out some custom stuff. Not had the phone long.
Thanks.
{EDIT} someone beat me to it as I was typing this post thanks for the above!
u9dbg said:
Ok for the dumb and ignorant among us (a.k.a me) what state does this leave your phone in.
I get I downgrade HBOOT to 0.80 and my phone will be wiped, but what ROM will be on the phone after the downgrade will it still be the OTA rom or will it be another one?
Or do I then need to install a ROM of my choice after the downgrade, sorry if this is a really stupid question, I haven't put any custom ROM on my Desire yet and then I got the OTA update as I was thinking about checking out some custom stuff. Not had the phone long.
Thanks.
Click to expand...
Click to collapse
After you've done the steps above you will have the following:
Blank and wiped device
Firmware: 2.1-update1 UNROOTED!
HBOOT: 0.80
Basband(Radio): 32.36.00.28U_4.06.00.02_2
Kernel: [email protected]#1
Build: 1.21.405.2 CL174215 release-keys
With that you can root and flash anything you want
Thanks for the tuto.
Hello sweety 0.80, bye bye dirty 0.92 ^_^
Worked for me.
Btw, didn't need the gc
Well, if this works AdamG doesn't have to find a way to root hboot 0.92.
:/
Sent from my HTC Desire using XDA App
Has anyone tried this on a branded, but rooted phone?
I've got an O2 branded desire with hb00t 0.83, I can root with unrevoked, but can't boot into recovery =( Hoping this will fix it.
It's works fine! Why doesn't work the recovery bat. on my PC?
u9dbg said:
Ok for the dumb and ignorant among us (a.k.a me) what state does this leave your phone in.
I get I downgrade HBOOT to 0.80 and my phone will be wiped, but what ROM will be on the phone after the downgrade will it still be the OTA rom or will it be another one?
Click to expand...
Click to collapse
Also for me, it's Volume Down + Power
Hi guys,
While Android 8.0 for Bolt and 10 Evo is not out yet ( or maybe never :v ), another dev is maintaining it - S.Team.
Yesterday (15/10/2018), they released the newest build for Bolt and 10 Evo ( as well as 10, Ultra ... )
I'm not the owner . I just download and share.
Orinal thread : https://tw.weibo.com/sundream1988/4295491971342435
Baidu link : http://t.cn/E7rx8UK ( pass : face ) - will be expired after 12h
Drive link : https://drive.google.com/file/d/1vtded5hvHJXTEfqk610GWR0rNndT8Hwi/view?usp=sharing
------------------------------------------------------------------------------------------------------------------------------------------
p/s : SO SORRY GUYS, MY HTC 10EVO/BOLT NOW HAS BROKEN SIM'S BOARD AND CANNOT BE REPLACED. SO I QUIT HTC
Was wondering if this new version was tried by anyone. I had some issues with data on one of the older versions
I'm using this ROM daily, everything is ok.
lcdkhoa said:
I'm using this ROM daily, everything is ok.
Click to expand...
Click to collapse
On HTC u or Bolt?
I get some bug with my Bolt. The boot+ can't start.
Camera don't work in pro mode. It's stuck on intro screen and there's no button like OK or start..etc
Will try it againt. Keep it up man.
Thanks. Sorry for my bad English.
thaiduong2009 said:
On HTC u or Bolt?
I get some bug with my Bolt. The boot+ can't start.
Camera don't work in pro mode. It's stuck on intro screen and there's no button like OK or start..etc
Will try it againt. Keep it up man.
Thanks. Sorry for my bad English.
Click to expand...
Click to collapse
Mine is HTC 10 Evo and Pro - mode works perfectly.
You can try these ways :
1. Back to stock ROM, then install S.Team ROM as an Update.
or
2. Booting to TWRP, fully wipe your phone and format it. Then install S.Team ROM
lcdkhoa said:
Mine is HTC 10 Evo and Pro - mode works perfectly.
You can try these ways :
1. Back to stock ROM, then install S.Team ROM as an Update.
or
2. Booting to TWRP, fully wipe your phone and format it. Then install S.Team ROM
Click to expand...
Click to collapse
I do the 2nd way (twrp) but need del the boot+_china folder in system/priv-app. Then boot+ work againt.
Thanks for rep .
I tried this rom coming from bad boyz. I can't get data going and cannot manually set the apn. I'm on the bolt
Maybe if I dirty flash the data settings will stick? Well.....that didn't work. Giving up for now. Without data, it's sort of pointless to use
I'm on 10 evo with cricket GSM. This Tom won't mess with the GSM capabilities right?
hey guys,
did you choose your carrier in Setting menu for Data ?
lcdkhoa said:
hey guys,
did you choose your carrier in Setting menu for Data ?
Click to expand...
Click to collapse
I did go in and choose sprint. Didn't seem to do anything. If anyone can enlighten me on how they got it working on sprint I would greatly appreciate it
Is based on Oreo?
I'm going to download and try it on my HTC BOLT, thanks
boot stopped and I can not uninstall it asks for security pattern before desistalarla
bleichtman said:
I did go in and choose sprint. Didn't seem to do anything. If anyone can enlighten me on how they got it working on sprint I would greatly appreciate it
Click to expand...
Click to collapse
There was a fix for this posted in a previous s-rom forum that was deleted. I don't remember exactly where you need to go but what you will need is a valid sprint rom with the proper carrier configs in it. I copied them out of an htc 10 leedroid rom before, but you can use any rom that has the US sprint config files in it. Open up with an unzip program the s.team rom in your pc and copy the sprint config files to the carrier folder where they belong. The rom should auto rezip the file with the new config back in when you close it. Flash the rom with the updated configs. I don't remember the exact path from the file names since those posts are deleted but that is how we got it working on his last bolt rom. I was checking through my folders, and thought I could pull up the config files to send you but I just can't remember where the were. Someone that knows a bit more about it may be able to give clearer instructions. -actually now that i think about, you might be one of the guys that got it working with 7.1! if not check with roadkill42 cause i think he got it working too. I'll have to play around with this download later when I have time since these things take some tweaking to get working.
EDIT: Ok found them, for example in the leedroid htc rom they are located here: LeeDrOiD_10_V5.2.1-R146-Stable.zip\extras\carriers\Sprint
I think its different for every rom, but that is the folder that you need to copy and put in a similar folder in the s.team rom. Not sure where since I haven't download it yet. Like I said, you should be able to pull the files from any other rom that has the sprint configs in them. Can't upload them cause the files 40mb. Of course there may be another way as well...
Rudielki said:
Is based on Oreo?
Click to expand...
Click to collapse
Android 7.1.2
How to switch form SU to magisk
Where can I find S.team.ROM kernel or boot inage without SU. I Flashed stock boot image but it doesn't work.
Sorry for bad English Hope you got me.
IronicalWolf said:
Where can I find S.team.ROM kernel or boot inage without SU. I Flashed stock boot image but it doesn't work.
Sorry for bad English Hope you got me.
Click to expand...
Click to collapse
You download an software on PC named "pack_unpack tool v3.8", then unpack "boot.img". After that, del folder "S.ROM" in "Out-put" folder. Repack it.
lcdkhoa said:
You download an software on PC named "pack_unpack tool v3.8", then unpack "boot.img". After that, del folder "S.ROM" in "Out-put" folder. Repack it.
Click to expand...
Click to collapse
Thank you so much brother but Its not working phone turns on and off only show HTC and in second turn off can you send me evo boot img for S.rom please
hi how should i install the rom zip file ?
i tried the stock recovery for installing zip but it faild
should i have to install custom recovery like twrp for the rom?