Just after reinstalling all my apps after some heavy experimentation I lost my 4 icons across. I installed a provisioning xml for Advanced Config 3.3 I found in the Raphael forum than had various fixes. The problem is after installing and soft reset I lost the 4 across icons (now 3 across) and I also lost the nice large menus for the softkeys.
Does anyone know how to fix this so I don't have to reinstall all my apps and st my Fuze back up? I did some searching and found a cab in the Blackstone forum, but I just want an Advanced Config answer so I know what is going on especially with the menus.
THis post belongs in the Advanced Configuration Thread, doesn't warrant a new thread.
Related
Hi,
Recently all my Emails/SMS's open at the bottom of the message, any one had the same problem, or know of the fix, registry setting maybe?
Thanks.
And your using WM6?
on the top right click the pull down menu for the sorting order
if it is already set by recieved
select it again and it will reverse the order
Yup thats right, totally unmodified ROM. Any Suggestions?
That's quite odd especially if your using poutlook, I do believe that a small feat of WM6 is that emails would open at the top. There are no settings in the app to change the read views, at least not that one. As far as registry changes, I would just browse through and try to find it. Registry edits are usually pretty easy to find and read, not to mention they are typically obvious with the function.
you dont need to reg edit
in outlook... the top bar
on the left it has the folder selection pulldown menu... inbox is the default
on the right it has the sort pulldown menu... recieved is the default
if it is already set to recieved, which it should, pull down the menu again and select recieved... it will reverse the order..
this works for all the sorting views...
There is no problem with the sort order, but with the view of the message itself.
I had the exact same problem after I installed Tweaks2k2 and enabled all the optimizations. When I unchecked the video performance improvements, it was back to normal.
with a simple search of "message open bottom" in the main kaiser forum reveals 6 topics all with the same answer
Here is five of them.
(ok so its only 4 threads and the last one is the search results, i omitted to cuz they just told the person to search)
But the solution has to do with d-pad navigation in PIE, solution found in those threads.. Wiki's not opening up so i i can't give the exact reg entry to edit. BUt as suggested in the linked threads, use kaisertweak
Yes Indeed, thanks very much for pointing me in the right direction, I have been playing with kaisertweak. All Fixed as soon as I changed it back to the default setting.
Thanks again for your help
I LOVE this forum and my new AT&T Fuze. I've been playing around with, and utilizing lots of the cab files and registry tweaks through here.
I finally have my Fuze just the way I like it, with custom buttons along the TF3D and a pretty home screen, along with minor modifications and tweaks. Yet, I have one unanswered fine-tuning I'd like to do...
I've searched and searched the forums and don't see this... Can anyone tell me how to change the wallpaper for all the tabs - 'except' for my Home screen and which won't mess up any of my custom tweaks that I've already done?
Hi there,
N00b Alert!
Im new to cooking and have a few queries:
Im cooking using the TPC kitchen with the 23004 SYS + XIP
1. how do you customize the size of the startmenu icons, they seem large and the lines on the folders are not straight, they are blocky. and another Q? for this is how do you change the icon??
2. how do I turn off that really annoying sliding sound, ive tried a couple of the registry modification packages that Alex supplies and also ive copied the settings from a 6.5 with the sliding sound turned off, but neither has worked.
Also I have a couple of start menu folders to remove, but I believe I can sort that with a .provxml file, is that the best way?
question #1 is probably the most important for me, as i dont like the "De-antialiased" effect the icons have!
I've been few a few tutorials on cooking but none seems to please my customisation requirements.
I've also searched like mad on the forums to the answer to the above ones and I cant find it.
Thanks in advance,
Dan
Danh2009 said:
Hi there,
N00b Alert!
Im new to cooking and have a few queries:
Im cooking using the TPC kitchen with the 23004 SYS + XIP
1. how do you customize the size of the startmenu icons, they seem large and the lines on the folders are not straight, they are blocky. and another Q? for this is how do you change the icon??
2. how do I turn off that really annoying sliding sound, ive tried a couple of the registry modification packages that Alex supplies and also ive copied the settings from a 6.5 with the sliding sound turned off, but neither has worked.
Also I have a couple of start menu folders to remove, but I believe I can sort that with a .provxml file, is that the best way?
question #1 is probably the most important for me, as i dont like the "De-antialiased" effect the icons have!
I've been few a few tutorials on cooking but none seems to please my customisation requirements.
I've also searched like mad on the forums to the answer to the above ones and I cant find it.
Thanks in advance,
Dan
Click to expand...
Click to collapse
You should have asked this in the kitchen thread..but here it goes...
search for start menu layout...like 4row hexagon and stuff like that...u will see different cab files to choose from. Its a cpr file that has the layout of start menu.
You can remove folders by editing initflashfiles. Although your folder link can be in ext folder as well in app.dat files. Search in both areas.
Sliding sound should be in OEM folder, look under either OEMAPPS, or OEMDRIVES. Edit the rgu file in there to disable it.
Post this question in the kitchen thread instead of opening a new thread on this.
less clutter,
Josh
Is there a way yet to change the right softkey in tf3d / sense ui to the programs screen? HD Tweak can change the right softkey, to anything in its right softkey list except to Programs (Default). That's what I want to change it to though. When I choose Programs (Default) and do a soft reset, it changes to camera instead.
I've tried HD Tweak and softkeymanager and neither will do what I'm trying to do here.
it's just a registry change. i changed mine to contacts. i did mine a while ago so i forget the details. i'll try to find the link.
Yeah, I've read around and some say it's just a registry change. Usually you need a name for the softkey and a path to an exe or shortcut right?
What's the path for or the location of an exe for that programs screen (the one with the rows and columns of icons with "+" signs on them) in TF3D / Sense UI?
found some info on it at here.
Quote:
Originally Posted by dshosu View Post
I think I may have figured it out or at least am on to something...
I remapped my LEFT softkey to open Windows Media Player.
HomeLSKArguments:-manila off
HomeLSKPath:
HomeLSKText:Media Player
HomeRSKArguments:
HomeRSKPath:\Windows\wmplayer.exe
HomeRSKText
I have a brand new Sprint TP2.
I believe you figured it out. Arguments is not needed though. -manila off doesn't do anything.
So RSKPath points to left... that's really annoying. I remember reading this somewhere, but it was so ridiculous that I never tried it. LSKPath doesn't do anything though. =( Definitely a bug somewhere
Reply With Quote
That'll work if the thing you want for the softkey has an actual shortcut or exe file. I want the right softkey to be the programs screen in TF3D / Sense UI (the screen with the columns and rows of boxes with "+" signs on them).
I've been asked to 'lock down' a couple of Intermec CN50's (running Windows Mobile 6.1) by removing certain items from the Settings Section.
The devices have custom settings applied to them via cab install which i've already finished, my problem is that I'm having trouble removing the last of the icons that my company wants removed.
In the System section of Settings i need to remove the "Regional Settings" and "Screen" icons so that users can't see them. Why these two icons have to be removed i do not know, but it's what i've been asked to do.
Can anyone point me in the right direction on how to remove these two items? Creating Registry Keys and using a Hide = 1 doesn't appear to work, and i cannot find .cpl files for these two items. I am currently unaware of any other methods to remove items from this section.
Any help would be greatly appreciated.