HI All
I m trying to connnect my i-mate jasjar with pc through usb cable but when i install the driver the message appears that the wizard cannot find the required software which software i need to install for connecting i-mate-jasjar with pc
We're going to need more info to help you better. Specifically:
1. What version of windows are you using on your desktop computer?
2. Do you have Microsoft Activesync installed on your computer? Download it from here and then give it another shot.
3. Is this the first time you're trying to connect your phone to the computer or have you done this before and has it suddenly stopped working?
Sounds like you haven't installed ActiveSync yet.
If you have vista download this: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
good luck,
Related
hey guys,
i upgraded my himalaya to wm5 yesterday, but i found dat i couldnt get my wm5 connected to pc after upgrading, the pc doesnt recognize my device, i've tried both activesync 3.7 and 4.0... can any1 help?
Active Sync new version 4.1 [Build 4841]
or go to microsoft homepage to find the latest version.
ok, will have a try.. thx so much :wink:
link to it
http://www.microsoft.com/downloads/...012-8793-d2d180a42dfa&DisplayLang=en#filelist
Hi all,
I have the same problem:
Upgrading to 1.60c.00WWE
Radio 1.17.00
and i have installed activesync 4.1 (last release from microsoft)...
activesync said he try to connect to my qtek 2020 (worked good before rom upgrade with activesync 3.8).
I also try to start from a good windows XP (and clean) version: i format my pc and reinstalled windows xp on it (sp2) + activesync:
same result (device detected but no sync)
on my qtek activesync (in the bottom on screen) said he is connected but not on my pc...
Any idea will help me good, thx a lot !
i got same problems right now, any one help us please
I. Try To use the latest Active Sync Program
II. Try to shutdown or Disable any antivirus or Firewall program
IV. try to restart the computer And the Device (Your PPC)
it will work . .. thanks
Me too
There's something wrong in the OS image. When I connect my Wizard via USB,I have no problems. But Himalaya want not connect. Why? I don't have SP2 in XP(Wizard is working correctly)!
ACTIVSYNC
If you are connected to a usb hub, try not using it and connect direct to computer. that sloved all of my sync issues of the phone not being seen.
Does anybody know where i can download the driver to my qtek s100?
I have just rebooted my pc and can not find the cd.
Thanks.
Driver for what?
Driver to get the qtek installed on the pc.
Look for program called Active Sync on google.
The program does not detect my ppc, even when i have plugged in the usb properly.
Thank you very much for the help, i figured it out
hi,
i own a htc cruise but the problem is i do not know what should I install in order to transfer the file or sync with outlook contact using cable from my cruise to pc or vice versa. I already install activesync and it does not work. The status is not connected and everytime I plug in the device via usb cable, it gives me error, device not recognize.
help me. what should I install? thank you.
Hope you have installed Active sync
Hi,
I think you need to instal Active sync. This is available on the CD which comes with TC. Otherwise here is the link to download.
http://www.microsoft.com/windowsmobile/en-s/help/synchronize/activesync-register.mspx
Hope this helps.
Krishna
If you have Windows Xp see previous post. In Vista you need:
for vista 32 bit http://www.microsoft.com/downloads/...FamilyID=46f72df1-e46a-4a5f-a791-09f07aaa1914
for vista 64 bit http://www.microsoft.com/downloads/...56-7825-43B2-AC89-2030ED98ED95&displaylang=en
Hi
Thank you for reading my post.
I do not know why, but active synch does not detect my Samsung i780. Even windows shows that a SGH-i780 is detected but nothing from the ActiveSyc side.
I installed Samsung USB driver and Active Syc 4.5, My windows is XP SP2 and all anti virus and firewalls are disabled.
Any advice is appreciated.
Thanks.
j
check active sync settings .
kindly try the following steps:
1. restart your phone
2. remove all usb devices (portable hdd, flash drives, etc.)
3. connect the cable first to your phone then to your pc.
if this doesnt work try reinstalling activesyc or check your cable.
i have experienced also this kind of of problem when usb devices are connected specially storage devices.
hope this one works
hallo
i had also the same problem..but now the problem is gone, try to uncheck the box in Connection---> USB to PC--> activation advandce networkfunktion. and then restart your pc and disconnect und reconnect your phone to your PC
hope it will work.
ps. sorry for my bad english
kindly install Microsoft ActiveSync 4.5 to your pc if your phone still not detect or regonize by windows even already install samsung modem driver.it works for me.
hi, im a new user and i have a problem connecting my spv c600 to my pc(windows xp)via usb. every time i try to connect my device the pc detects at first but then says"a problem occurred during installation your new hardware might not work properly" i have activesync 4.5 installed but it does not detect. i was wondering if there is a free driver i could download to sort this problem .please i need your help because i want to upgrade the rom
Windows Mobile devices are connected either via RNDIS or Serial over USB. Usually the decice is in the mode to connect over RNDIS, but when the drivers are missing on the PC they must be installed there. Look for generic RNDIS drivers on windows XP. You could also try to switch the device to Serial over USB mode. This hides in a something like "enhanced functionality" on the USB connection. On is "RNDIS" while off is "Serial" mode.
where can this "enhanced functionality" be found, on the device or on the pc, please guide me i'm kind of new on this things
It is on the phone, probably somewhere in the settings menu. No clue about the menu on your phone as I use a cooked WM6 ROM. Possibly it is even only hidden in the registry somewhere. You will have to search XDA for this a little yourself - I cannot guide you through this.
thanx for yor help