I have the HTC Touch and I can't get it to boot past the win mobile 6.1 start up screen.. any ideas?? thanks
I take it you have tried a hard reset? WinMo 6.1? did you flash your rom? or is it the official HTC update as I read it only works on some versions of the touch and not others.
same problem here. doesnt get past the startup screen. after that only the small orange light goes on( and flshes of after 10secs for 1 sec). cant active sync. have tried hard reset, but doesnt change anything
How can I flash the ROM? I found a link through here that had be download the ROM I need, but in order to load it through Hard SPL (?) I need to have Active Sync detect the device...
Active Sync wont detect my device since it wont boot....is there a link with instructions to flash this ROM to the phone without Active Sync detecting the device?
Im in the same boat.
go to the touch's section and read about this problem. it's pretty common.
besides, you can flash ROMs using bootloader, which you can find info on anywhere in this forum by using the search function.
there is a specific button combination for the touch to load bootloader.
I got a problem almost like this,
My HD2 doesn't start WM6.5. It freezes after the HTC loading screen.
I've installed other ROMS but the problem remains?
Any suggestions?
Kind regards,
A.K.
LosTontos said:
I got a problem almost like this,
My HD2 doesn't start WM6.5. It freezes after the HTC loading screen.
I've installed other ROMS but the problem remains?
Any suggestions?
Kind regards,
A.K.
Click to expand...
Click to collapse
Did you HardSPL before flashing? Try switching from whatever you have right now to stock.
Device info ;
R 2.06.51.07
G 15.30.50.074
D 1.66.76641
PB81100 HX - BC
SPL-1.66.0000 XE
MicroP(led) 0x05
MicroP(Touch) 0x40
What i've done ;'
1 - Downloaded HSPL_2
2 - Installed HSPL 1.42 Cotulla HSPL
3 - Downloaded RUU_Leo_HTC_NLD_1.43.404.1_Radio_Signed_15.26.50.0 7U_2.04.50_22_2_Ship
4 - Installed this ROM
Device info
R 2.04.50.22_2
G 15.26.50.07U
D 1.43.70124
It starts up until the "HTC QUIETLY BRILLIANT" screen. It loads untill 100%
Butt then it freezes again.
What im doing wrong?
Are you certain that you are unlocked? The bootloader should have the word Cotulla somewhere in there and if the info that you posted is correct, then you are still locked...
Flash back to stock.
I've installed HSPL 1.42
The bootloader shows the following ;'
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
I've tried to install ; Energy.Leo.21901.Sense2.5.Cookie.HomeTab.Apr.23
It installed it, after a hard reset booting up. butt it freezes now at the loading screen of Energy Leo. (Please wait while your device is starting for the first time, This will take a few minutes)
How to flash back to stock? couldn't find it.
Got a HTC HD2 , NLD.
LosTontos said:
I've installed HSPL 1.42
The bootloader shows the following ;'
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
I've tried to install ; Energy.Leo.21901.Sense2.5.Cookie.HomeTab.Apr.23
It installed it, after a hard reset booting up. butt it freezes now at the loading screen of Energy Leo. (Please wait while your device is starting for the first time, This will take a few minutes)
How to flash back to stock? couldn't find it.
Got a HTC HD2 , NLD.
Click to expand...
Click to collapse
Look around in the HD2 section under development and you may see a sticky or two with instructions on where to get this.
Oke, thank you. Gonna check it out. Will post here the progress.
LosTontos said:
Oke, thank you. Gonna check it out. Will post here the progress.
Click to expand...
Click to collapse
Make sure you flash stock SPL from the HSPL hacker, you can find stock in the Wiki or on the HTC site
This is what i've done,
PB81100 HX-BC
Installed SPL 1.66.000 XE
Micro(LED) 0x05
Micro(Touch) 0x40
This is the stock SPL isn't it?
After installing 1.66.000 SPL, downloaded ;
Downloaded a stock ROM. LEO 1.66 NLD.
Installed it, after this it started untill windows mobile!
Butt after a few second it freezes again. Now, i've loaded the bootloader to check my SPL.
Now im trying to boot the phone again, butt again it freezes at the HTC start up screen.
Did something wrong again?
SPL 1.66.000 is a original SPL isn't it?
1.66 is a stock SPL, if you have that and a stock ROM, i would send it back to HTC for repair
Allright,
So i have now ;
SPL 1.66 on it
and this ROM
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Is this stock? If it is im gonna send it to HTC indeed.
LosTontos said:
Allright,
So i have now ;
SPL 1.66 on it
and this ROM
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Is this stock? If it is im gonna send it to HTC indeed.
Click to expand...
Click to collapse
Yup, if its from the wiki, or from HTC, it will be stock
Oke you say the SPL is correct.
The ROM i've downloaded is from the HTC site indeed!
Oke, Badwolve1 and egzthunder1 and all the others! Thank you for you're effort!!
I'm gonna call HTC tommorow. I will post here the progress!
Keep ya updated!
Guys, i kept tryin to fix my phone last night ..
What happened ;
As you know, the phone didn't want to load WM 6.5.
It kept freezing at the HTC loading screen.
Loaded the bootloader ;
installed last night
STOCK SPL 1.66
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH 0x40
R 2.06.51.07
G 15.30.50.07U
D 1.66.76641
And this stock ROM
1.66.404.1 (76641) NLD
After installation the phone loaded into WM 6.5 :|
Thought it would freeze again, butt kept the phone the whole night on with some programms running and it still works!!!
Thank you so much everyone!!
Related
i have an at&t tilt. Kaiser. and im tring to flash the rom with the wm6.1 RUU
Ok.. So i have all of these files. I tried to run the RUU but a got an ERROR [294] : INVALID VENDER ID
Iv tried to use the JumpSPL.56 then run the RUU but the status bar sticks at 0%.
I tried th hardSPL and when the jump loads on my kaiser instead of the color screen i get an all white screen
kaiser-HardSPLv1
JumpSPL1.93-KAIS
JumpSPL1.56-KAIS
htc_charmer_upgradeut_noid
JumpSPLv1
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
a1lfa said:
i have an at&t tilt. Kaiser. and im tring to flash the rom with the wm6.1 RUU
Ok.. So i have all of these files. I tried to run the RUU but a got an ERROR [294] : INVALID VENDER ID
Iv tried to use the JumpSPL.56 then run the RUU but the status bar sticks at 0%.
I tried th hardSPL and when the jump loads on my kaiser instead of the color screen i get an all white screen
kaiser-HardSPLv1
JumpSPL1.93-KAIS
JumpSPL1.56-KAIS
htc_charmer_upgradeut_noid
JumpSPLv1
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
Click to expand...
Click to collapse
Very good grasshopper!
You have not yet finished reading I suspect - there is (in the WIKI) how to handle the white screen...
Weary not in well doing...
You will be rewarded for your efforts.
Bill
SEARCH AND READ ALL THREADS BEFORE POSTING A NEW ONE!!
AND READ THE GOD DAMN WIKI!!!
thank you
a1lfa said:
i have an at&t tilt. Kaiser. and im tring to flash the rom with the wm6.1 RUU
Ok.. So i have all of these files. I tried to run the RUU but a got an ERROR [294] : INVALID VENDER ID
Iv tried to use the JumpSPL.56 then run the RUU but the status bar sticks at 0%.
I tried th hardSPL and when the jump loads on my kaiser instead of the color screen i get an all white screen
kaiser-HardSPLv1
JumpSPL1.93-KAIS
JumpSPL1.56-KAIS
htc_charmer_upgradeut_noid
JumpSPLv1
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
Click to expand...
Click to collapse
Did you unlock your phone first? The upgrade is not an AT$T update . It is for unbranded phones only. It will not work on a locked AT$T Tilt.
THANKS
Thanks for the reply. I tried that already. Except every jumpSPL i place on my 4gb card. All i did was put it on the actual device my document and its works like a charm. ! thanks again. and i will surly use this site more!!!!
a1lfa said:
Thanks for the reply. I tried that already. Except every jumpSPL i place on my 4gb card. All i did was put it on the actual device my document and its works like a charm. ! thanks again. and i will surly use this site more!!!!
Click to expand...
Click to collapse
So, Let me get this straight...Instead of following advice & reading, you decided it would be a better idea to flash a ROM using JumpSPL???
You see my name??? Please forget it, it'll do you no good.
????
no.. i ran JumpSPL1.93-KAIS from the device
then i flashed using ruu in kaiser-HardSPLv1.
then i flashed using RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04.
Hi to all. Is there anyone who can help me with HardSPL my snap which shows SPL 1.24. I would like to use some of the cooked roms. Cheers.
rocksford77 said:
Hi to all. Is there anyone who can help me with HardSPL my snap which shows SPL 1.24. I would like to use some of the cooked roms. Cheers.
Click to expand...
Click to collapse
Try ookba's roms, use Auto_1.19 worked for me... If it all goes wrong as we now have a shipped rom you can fall back to SD flash as in this post:
http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78
ibanyard said:
Try ookba's roms, use Auto_1.19 worked for me... If it all goes wrong as we now have a shipped rom you can fall back to SD flash as in this post:
http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78
Click to expand...
Click to collapse
No, it didn't work for me. I thought by now there will be a solid solution to this. Now we are stuck with stock roms as we cannot HardSPL our devices.
SPL 1.24 is hard to hack. Anyone got any solutions??????
rocksford77 said:
No, it didn't work for me. I thought by now there will be a solid solution to this. Now we are stuck with stock roms as we cannot HardSPL our devices.
SPL 1.24 is hard to hack. Anyone got any solutions??????
Click to expand...
Click to collapse
What didnt work?
I ran the Auto_1.19, (it prompted that device wasnt connected a couple of times, then got the prompt on the device to ask if an application should be run, selected yes (using left softkey), then had to use the trackball to select yes (the screen obscures some of the prompt), then screen went black and RUU began upgrade proces..
ibanyard said:
What didnt work?
I ran the Auto_1.19, (it prompted that device wasnt connected a couple of times, then got the prompt on the device to ask if an application should be run, selected yes (using left softkey), then had to use the trackball to select yes (the screen obscures some of the prompt), then screen went black and RUU began upgrade proces..
Click to expand...
Click to collapse
When I use Auto_1.19, i press the track ball on my device, I get an Error message and asks me to send the error to microsoft.
rocksford77 said:
When I use Auto_1.19, i press the track ball on my device, I get an Error message and asks me to send the error to microsoft.
Click to expand...
Click to collapse
Try with the older version if still fails might be worth a hard reset....
Anyone knows if HardSPL for SPL 1.24 is developed yet?
HArder SPL 1.24
Yeah anyone? I have a SNAP with SPL 1.24 running WINDOWS Mobile 6.5 but I cannot for the life of me get any of the JockyW SPL's to work 1.17 or 1.19. I hate these Bloody Telstra / HTC phones, there locking them down so tightly nowdays. Not even the SDA unlocker works.. it tells me the phone is unlockable
SNAP with 1.22 Telefonica
Hi ther,
I´m running with a SNAP from Telefonica with SPL 1.22 and WM6.1 which doesn´t let me install any of the ROMS here. Not even upgrade to 6.5 of original ROM from HTC. It says 294 invalid vender ID.
I have also tried aplication unlocker.. and nothing seems to work.
A few questions... has HardSPL 1.24 been released?
Any ideas to be able to flash a new rom onto this baby...
Thanks
OkiOKi.
I have MAPL110 with SPL-1.24.0000. Successfully flashed by hspl 1.17 and
this ROM - 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.2.50.112509.
succesfully flashed spl 1.25. used hard spl 1.19 through activesync. stuck on tmo load up page then used bootloader then flashed 11.25.09 rom from there.
all went well and my wife has a newish dash for $100
hi guys i installed the 3vloution series rom and when i wish to change it back to the original htc rom it gets disconnected and connected at 14%.. however it hangs at 27%..
help appreciated
Hi @ll,
yes, that behaivior can I confirm. My Snap do the same. A reflash to the EVO rom afterwards works fine...
Any Ideas...how to get the orginal 6.5 back to the Snap?
Thx and regards
Frank
same here
Any solutions in the meantime???
Got it!
Hi,
I found a woking way to go back to the original ROM (and SPL) . But I'm quite sure, that it isn't the easiest way to do that - it killed my nerves and pushed me into desperation in the meantime
Before I was on SPL 1.17 and the flash of original ROM hung at 26%
Sounds crazy, but that's what I did:
1) flashing Hard SPL 1.19
2) flashing Original SPL 1.19 (TriColor Screen showed 1.19 0000)
3) tried to flash Original Snap WM 6.5 ROM GER
=> flash hung at 17%
4) tried to flash 3VO Evolution
=> Error, because of Original SPL
=> not possible to flash Hard SPL, because ActiveSync-Connection is required
At that time desperation grew to panic. NOTHING worked, so I thought I broke it and can't get it to life anymore
5) tried to flash Original Snap WM 6.5 ROM GER again
=> flash hung at 17%
=> at next start I realized that SPL-Version had changed to SPL 1.23 0000
6) tried to flash Original Snap WM 6.5 ROM GER again
=> flash worked and the Snap is back to delivery status
maybe it will work for you too
confused
what did u do?? i have the ssame problem
PRoblem solved!!
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal
xxchapin1ra7xx said:
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal
Click to expand...
Click to collapse
You have a link for his site? I would like to remove the HARDSPL. Thanks.
sikkboy626 said:
You have a link for his site? I would like to remove the HARDSPL. Thanks.
Click to expand...
Click to collapse
Please have a look at the 4th sticky in this forum. It's a little bit hidden but the title is about "HardSPL, Original SPL and JockyW"...
And then I recommend to perform the steps in the order I stated before.
Good Luck!
its on the xda website in the maple rom devlopement
sorry i would post a link but im a new member and new members cant post links
I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !
I am trying to install MAGLDR 113 on my HTC HD2, but I click on ROMupdateutility it just stays at 0% forever. So, I checked my SPL version on which showed this
PB81100 HX-BC
SPL-3.03.0000 XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X30
I tried to install Harspl 2.08 but with no luck
Is it I can't install because I have updated my ROM from HTC website.
Do I need to degrade my ROM to 2.08 ?!! If I have to then how I go on about it?
Thanks very much for your help (already)
androidrams said:
I am trying to install MAGLDR 113 on my HTC HD2, but I click on ROMupdateutility it just stays at 0% forever. So, I checked my SPL version on which showed this
PB81100 HX-BC
SPL-3.03.0000 XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X30
I tried to install Harspl 2.08 but with no luck
Is it I can't install because I have updated my ROM from HTC website.
Do I need to degrade my ROM to 2.08 ?!! If I have to then how I go on about it?
Thanks very much for your help (already)
Click to expand...
Click to collapse
U HAVENT MENTION YOUR HD 2 VERSION IS IT T MOBILE 512 OR 1024 OR NORMAL HD 2 .SOME INFORMATION REQUIRED . GO INTO BOOT LOADER SCREEN AND CONNECT YOUR PHONE TO PC (XP OR WINDOWS 7 ) IF WINDOWS 7 RIGHT CLICK AND RUN AS ADMIN( ROME UPDATE UTILITY) IT WILL WORK. http://forum.xda-developers.com/showthread.php?t=893948
PROVIDE COMPLETE INFORMATION
hi, I am from the UK, I have successfully installed Gingerbread on the SD Card but wanted to do a direct boot and actually was following the instructions from the thread you suggested. I can't get to the bootloader screen because I couldn't install ROMupdateutility - cheers
androidrams said:
hi, I am from the UK, I have successfully installed Gingerbread on the SD Card but wanted to do a direct boot and actually was following the instructions from the thread you suggested. I can't get to the bootloader screen because I couldn't install ROMupdateutility - cheers
Click to expand...
Click to collapse
u must be using t mobile hd 2 1024
1. hspl 2.08 http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
2.magldr http://forum.xda-developers.com/showthread.php?t=893618 if 1.13 doesnt work use 1.11
3.flash nand rom using daf
according to u i hope direct boot means nand installation
hope this video helps
http://www.youtube.com/watch?v=cvS4EvS0PAw&feature=player_embedded
to go into bootloader screen turn off your phone press volume down and switch on the phone this will enter into bootloader the one which u r talking about is malgdr menu so do the hspl and try the rest
dont forget to click thanks let me know if u need any more help.after installinng hspl go into bootloder and check if it shows hspl 2.08 before doing the rest and check your radio that might be an issue http://forum.xda-developers.com/showthread.php?t=611787
http://forum.xda-developers.com/showthread.php?t=653614
hope this solves your problem be careful in radio as wrong radio might brick your phone.
install active sync for xp or windows mobile device center http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displayLang=en
best of luck porting android let me know which android built u want to install
hi,
thanks for the replies...I tried to install HSPL 2.08..i get this error message
Critical error
flow 000000005
error code 000000005
description : bad SPL version
I am guessing is because I have the latest Rom from HTC UK (Phone works fine, touchwood)
and radio version i have is 2.15.50.14
rom version 3.14.405.2(04666)wwe
Thanks
Which Leo are you using 512 or 1024?
androidrams said:
hi,
thanks for the replies...I tried to install HSPL 2.08..i get this error message
Critical error
flow 000000005
error code 000000005
description : bad SPL version
I am guessing is because I have the latest Rom from HTC UK (Phone works fine, touchwood)
and radio version i have is 2.15.50.14
rom version 3.14.405.2(04666)wwe
Thanks
Click to expand...
Click to collapse
truely your rom is an issue just downgrade:
here you go:
1. Turn on the phone holding down the volume down key till you arrive at the bootloader screen.
2. Plug cable into phone and plug into your computer.
3. Flash a stock rom via the RUU method
4.then run hspl
it will solve your problem for sure your rom doesnt seem to be correct as wwe is meant for india hd 2 u need to flash t mobile stock rom and 1 more thing u havent installed hspl so how did u install android via sd card.dont install anything till u are able to install hspl ,since u already made a mistake by installing android without hspl i dont know how u did it. just try the stock rom does your phone has a t mobile logo on top this is the main stuff since till now u never said which phone you are using t mobile 512 or 1024
if all doesnt work your radio is fine just install the correct rom and proceed only when u install hspl later installing android orelse your phone will go dead
just note the steps
1.stock rom needed (better)
2.radio is fine
3.install hspl (dont proceed until u r unable to install)
4.maldgr 1.13 or 1.11 (both installation is different) so note how to do it.
5.clockwork recovery depending on the android rom u want to use.
6.nand boot ur android rom prefrence ( all rom cannot cannot install through nand it has option to boot from sd card through malgdr)
7.if installing from sd card you need to create partition in sd card.
so let me know which process u r looking for and i will guide you accordingly first just install stock rom and which phone you have t mobile 1024 or 512 leo
just chk your message .
I am sick and tired of this I have changed the radio..chaged the HSPL 2.08 I have run the ROMUPDATEUTILITY and what I get in USB flasher mode when I try to install DAF.exe this
Readme.txt file missing
I click next I get this
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
any solution
thanks
androidrams said:
I am sick and tired of this I have changed the radio..chaged the HSPL 2.08 I have run the ROMUPDATEUTILITY and what I get in USB flasher mode when I try to install DAF.exe this
Readme.txt file missing
I click next I get this
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
any solution
thanks
Click to expand...
Click to collapse
look you are still not replying on which t mobile do u have 512 or 1024 its very difficult to help u without knowing that secondly there was no need to change radio as that was the best u had earlier
go to :Settings, System, Device Information, Hardware Information and look at the Flash Size.or just say if u have red and green button for call or normal white buttons.u are messing it up by not replying properly if u let us know the correct inf ur problem will be solved
now definately it seems u have 512 leo with white call buttons
just reply on this and the rest will be done
if it is white buttons just go through this http://forum.xda-developers.com/showthread.php?t=609477 and your problem will be solved
look your spl 3.03 dont support android,wp7 etc so u need to flash stock rom having spl 2.08 /2.10 in order to proceed installing android with malgdr
first do task 29 http://forum.xda-developers.com/showthread.php?t=644781
2nd install stock rom :here is the list of stock rom
http://forum.xda-developers.com/showthread.php?t=655653
make sure you install hspl
Thanks..I think few of others had the same problem with the readme.txt not being able to found with DFT...anyway I installed version 112 with no problems at all
by the way I am normal HD2 512mb flash
androidrams said:
Thanks..I think few of others had the same problem with the readme.txt not being able to found with DFT...anyway I installed version 112 with no problems at all
by the way I am normal HD2 512mb flash
Click to expand...
Click to collapse
enjoy mate good luck
Hello shhbz,
see you are very familiar with this issue I have a very similar problem but cannot get it solve:
I get to the 3-colored screen and it says:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
btw very similar to the previous case.
I get a good connecting by USB and HSPL4 starts perfectly.
I choose 2.08.HSPL and the green bar starts running. But when it is on full it went back again. After serveral forth and back I finally get a
CRITICAL ERROR
Flow:00000006
Error code:00000014
Description: Unknown
Its a Vodafone branded HD2 with 512 MB with the latest original firmware DE 3.14.162.5
I think it was stupid that I tried to run android from a SDcard as I now found that SPL-3.03.0000.
I tried to flash ROM with the originals also previous version 1.72.xx (no success) stop always already after 1% bar.
Flash procedure runs longest with Task29 where it runs to 19%
in both cases it reboots and show white/gray screen without HTC and stuck there.
Is the unit gone or do you have some useful advices I spend a whole day with this and google a lot of pages ... but now Im really stuck as my beloved HTC HD2.
Which Leo are you using 512 or 1024?
using 512 MB
Which Leo are you using 512 or 1024?
as I said ... it has 512 MB
anybody who like to help?
thetrimaster said:
Hello shhbz,
see you are very familiar with this issue I have a very similar problem but cannot get it solve:
I get to the 3-colored screen and it says:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
btw very similar to the previous case.
I get a good connecting by USB and HSPL4 starts perfectly.
I choose 2.08.HSPL and the green bar starts running. But when it is on full it went back again. After serveral forth and back I finally get a
CRITICAL ERROR
Flow:00000006
Error code:00000014
Description: Unknown
Its a Vodafone branded HD2 with 512 MB with the latest original firmware DE 3.14.162.5
I think it was stupid that I tried to run android from a SDcard as I now found that SPL-3.03.0000.
I tried to flash ROM with the originals also previous version 1.72.xx (no success) stop always already after 1% bar.
Flash procedure runs longest with Task29 where it runs to 19%
in both cases it reboots and show white/gray screen without HTC and stuck there.
Is the unit gone or do you have some useful advices I spend a whole day with this and google a lot of pages ... but now Im really stuck as my beloved HTC HD2.
Click to expand...
Click to collapse
look it seems that you havent installed hspl till now but if you had suceeded in installing hspl than go back to stock rom 2.08/2.10 suggested follow the process here 1 by 1 http://forum.xda-developers.com/showthread.php?t=609477
if u havent than u need to flash stock rom i hope if this help http://forum.xda-developers.com/showthread.php?t=606713
just get the stock rom and the rest will be smooth i will help u with the rest
if u have brick than try these http://forum.xda-developers.com/showthread.php?t=591314
http://forum.xda-developers.com/showthread.php?t=668347
since i dont have much idea about vodafone branded hd 2 stock rom so u need to search 1 for urself.once u flash a spl 2.08 stock rom then all your probs will be solved
another suggestion will be to hspl 3.03 instead 2.08 and then flash to stock rom spl 2.08 old version.
then follow the steps
1.hspl
2.malgdr
3.clockwork recovery depending on the nand rom u choose
4.partitioning the sd card
5.boot android !enjoy
hope this helps just chk the first link there is all option of stock rom and all stuff
any probs let me know here are vodafone stock roms just ask in that forum bfr flashing http://forum.xda-developers.com/showthread.php?t=623283
DONT FORGET TO RUN HSPL IN ADMISTRATOR PRIVILEGE
has your problem solved - cheers