Related
I've installed Prophet AKU2.3 pdamobiz customized rom [G4!!, with SPL 2.15.0001] 16 MB version yesterday to try:
http://www.pdamobiz.com/show_news.asp?NewsID=68863
and it's AWESOME. The whole device is boosted up, so fast then never before! It's the best rom I've ever tried so far, honestly. Also movies, musics, all the menus and everything works fine, properly, without stack or any problem. It didn't need and CID unlock or anything, I had just to follow the instructions the program gave me.
The link above is in thai, but mainly the procedure is the following:
1. download the program (unrar it to the folder you want)
2. Backup all your important data from the Prophet
3. Run "Clear Storage" program on your device, wait for soft reset
4. Tap the screen once to get to the "Align" procedure, but stop here (cross will be shown in the middle)
4. attach your Prophet to the PC with active sync (cable!)
5. Cancel the Active sync recognizing procedure (anyway, Active Sync will establish the connection)
6. Now start the program from PC called "UPGRADE_ROM.bat"
7. Wait, give it the time to install ext.rom and everything
8. Hard reset your device (Push at a time: camera, conn.comm buttons and reset with the stylus, hold on on camera a connection button, then push the green phone button)
and it's done. The only disatvantage is that it installs a lot of quite unusuable program, too, but it's not annoying at all. If you install Spb pocket plus and Pocket informant, you're done, no need for these progs (more or less).
Szszab
minor glitches
Is anybody out there wich gets a "can not ececute TimeWizard.exe" error?
My upgrade hanged before the second reboot, and everything looks OK but I keep getting this annoying error.
The file is missing in the Windows directory. What is this suppossed to do?
Any help?
?
What can I do to translate this Rom into a german one? Or is a language Pack out there?
Isn't there an other link? PDAMobiz is to slow... ...downloaden for hours!
yeah a faster dl link would be great, tia
tried that ROM aswell, but it stucks after flashing at the dopod screen :\
szszab said:
I've installed Prophet AKU2.3 pdamobiz customized rom [G4!!, with SPL 2.15.0001] 16 MB version yesterday to try:
http://www.pdamobiz.com/show_news.asp?NewsID=68863
and it's AWESOME. The whole device is boosted up, so fast then never before! It's the best rom I've ever tried so far, honestly. Also movies, musics, all the menus and everything works fine, properly, without stack or any problem. It didn't need and CID unlock or anything, I had just to follow the instructions the program gave me.
The link above is in thai, but mainly the procedure is the following:
1. download the program (unrar it to the folder you want)
2. Backup all your important data from the Prophet
3. Run "Clear Storage" program on your device, wait for soft reset
4. Tap the screen once to get to the "Align" procedure, but stop here (cross will be shown in the middle)
4. attach your Prophet to the PC with active sync (cable!)
5. Cancel the Active sync recognizing procedure (anyway, Active Sync will establish the connection)
6. Now start the program from PC called "UPGRADE_ROM.bat"
7. Wait, give it the time to install ext.rom and everything
8. Hard reset your device (Push at a time: camera, conn.comm buttons and reset with the stylus, hold on on camera a connection button, then push the green phone button)
and it's done. The only disatvantage is that it installs a lot of quite unusuable program, too, but it's not annoying at all. If you install Spb pocket plus and Pocket informant, you're done, no need for these progs (more or less).
Szszab
Click to expand...
Click to collapse
Is this AKU3 rom ENGLISH version? Any traditional chinese version?
Hi Folks,
I know, there are so many postings about problems with the Palm 750v and Blackberry Connect. But because I desperately need help and I can not find a solution for my problem, I raise this question again.
My device:
Treo 750v from Vodafone Germany
Software-Version: TREO750-1.16-VFD (latest one)
Firmware: 1.12.0c.00
For Blackberry I am using the software which Palm and Vodafone promote on their homepage.
Blackberry-Version: 2.1.1.31
My company has an Enterprise server an everything is set-up properly.
NOW THE PROBLEM:
Once it starts connecting to the server, after the message DatecTunnel is available it is going to turn to: NO CONNECTION and this is not going to change.
By the way, the PIN is generated without any problem or failure again.
Pls Folks try to help me, because otherwise my destiny will be that I will be forced by the company to change to a BB device :-( So guys, this is a real emergency case.
Looking forward to your kind reply.
Bye
Dirk
dhuels said:
Hi Folks,
Treo 750v from Vodafone Germany
Software-Version: TREO750-1.16-VFD (latest one)
Firmware: 1.12.0c.00
For Blackberry I am using the software which Palm and Vodafone promote on their homepage.
Blackberry-Version: 2.1.1.31
Click to expand...
Click to collapse
With firmware 1.12.0c you have to use the client 2.1.2.52 attached in this thread:
http://forum.xda-developers.com/showthread.php?t=304670
Hi, thanks for your suggestion. I tried it, but it did not work either.
Any other idea ? I am getting mad about that.
Thanks in advance for your kind help.
Dirk
Hi, I re-install everything, soft reseted and now it connects. This is the first step, but still I can not receive and send any mail. Any idea ?
You have to cradle the device with the BlackBerry Desktop Configuration Tool for Windows Mobile on a PC within your company network. This way you connect to your companys BES and get the service books you need.
Sorry, maybe I did not mentioned it. I did this already, but still, no success.
maybe I have to use a different version as well ?
Do you have service books on the device? Check the settings in start >> system >> blackberry.
Normally when you start the BB connect desktop and click on connect, you have to generate a key by moving the mouse. Then your calendar is loaded to the device. Did that happen?
Yes, services are booked. I generated the key and calender was loaded. that is all fine. but still no emails are delivered
Delete the service books (should be 3: ALP, CMIME and CICAL). Then cradle the Treo again and click on connect. Calendar is loaded and key generated.
Plug out the device and make sure that no other programs as Active Sync or Internet Explorer are running in the background (check in task manager on the Treo). Then go to blackberry settings and use the option "register now"
Did it, but no change. The only thing I realized, that a key was not generated, by moving the mouse, because system did not asked for it. But when I see the BB Desktop Software, my PIN is still there. Maybe how to clean the BB Desktop Software ? I de-install and install it again, but the PIN is still there. Does it has something to do with that ?
To make sure that everything is fine on your side, do the following:
Uninstall the Desktop Configuration tool.
Then install this version:
http://sems.org/content/download/bbc4/activesync_bbconnect_desktop_setup_4.0.0.17.zip
Don' t use the default path, change it to another one.
Uninstall the BB client from Treo.
When asked if you want to preserve configuration settings, check no.
Reboot the Treo.
Install the BB client again.
Reboot the Treo and when you are connected do register now.
Then cradle the Treo to the new desktop tool and click configure wireless device.
If you still get no emails then, there is a problem with the settings of your user on the BES and you should contact your BlackBerry administrator.
Hi !
I checked with my Admin and with Vodafone. Finally it was a problem on Vodafone side.
That is the comment from VF: I have checked the Phonenumber. The User uses a Palm-Device, and on the RIM-Database, was the Device a Prosumer-Device.
So I changed the settings on the RIM-DB, and resend the necessary Servicebooks. The Device should work better now (maybe make a Softreset from the Palm)
After that and a soft reset all works great.
Thanks for your kind help, which I appreciated a lot.
Dirk
dhuels said:
Hi !
I checked with my Admin and with Vodafone. Finally it was a problem on Vodafone side.
That is the comment from VF: I have checked the Phonenumber. The User uses a Palm-Device, and on the RIM-Database, was the Device a Prosumer-Device.
So I changed the settings on the RIM-DB, and resend the necessary Servicebooks. The Device should work better now (maybe make a Softreset from the Palm)
After that and a soft reset all works great.
Thanks for your kind help, which I appreciated a lot.
Dirk
Click to expand...
Click to collapse
Hi can you explain how you changed the RIM-DB settings? I have the same issue changing from an E61 trying to setup a Voda 750v
RFBakeruk said:
Hi can you explain how you changed the RIM-DB settings? I have the same issue changing from an E61 trying to setup a Voda 750v
Click to expand...
Click to collapse
Sorry, I can not tell you, because my ADMIN did that in co-operation with VF. But it seems, that if at VF side your device is registered as a BB it will not work, therefore there must change it. Call your ADMIN and VF and tell them that you are running the BB service with a WM device and tell them it's a PALM Treo.
I managed to get a copy of BlackBerry Connect 4.0.0.67 and installed it on my 'test' Wizard. It installs OK, however when I configure it with the 'BBSettings.exe' application it all looks OK - it says 'preparing for first use...' and then after a short while it says 'click OK to reboot'. After that it reboots and then gets stuck on the 3rd Boot Screen, the Wizard is active as I can explore it via ActiveSync.
Any ideas?
Andy
Try upgrading to BB Connect 4.0.0.100
I have it installed on my Wizard and its working fine... but I have a problem... I don't know how to configure it... Do you have a clue how to configure it?
I have a Treo 750 (Telstra, Australia) and today decided to update to WM6.
I have it synced to my PC running Vista Ultimate. Did this just before the install, then ran the install and half way through it crashed. After resetting the Treo, it came up with the initial install screen (date/country/etc). After completing all this it went in and it was still WM5... so obviously the update failed. But all my settings are gone (including email/contacts/etc, which are still on my PC).
BUT, now the computer won't recognise it when i plug in via USB, so I cannot even sync all my stuff back to WM5, let alone install WM6.
I have had a read of these forums, and it seems that to do an installation through a SD card, you need to do some of the steps through sync first, so unless i can work out how to sync it, i think i am screwed. Can anyone help?
Thanks
Hello,
I have an HTC Touch Cruise with windows mobile 6.1. I use it on my motorcycle with TOMTOM NAVIGATOR, and earphones. I config TOMTOM, push the today screen and lock my phone. It works perfect for 10 min.
After the 10 min, windows mobile displays a message:
"TOMTOM NAVIGATOR is still running an using the battery would you like to close NAVIGATOR", you must aswer the question with YES or NO.
If you do not answer the question, windows mobile close the NAVIGATION software. > very irritating....
Is there an solution to disable this battery saving function, so the NAVIGATION software must never stop automatically...
Thanks
it only asks if tomtom is running in background
I reckon your screen lock is behaving as foreground app. first try to run tomtom without keylocker, if the issue is gone, search for different keylocker.
otherwise, there is no trigger, nor registry for this.
Not working
Hello,
I have tried to not locking my phone, but only running tomtom with windows mobile today screen.
Then also i recieve the question.. Are there other solutions, or this problem ?
something is running in front of it. Something on your pda is behaving as front app. You need to find out what is it and stop it from running.
use a proper task manager like fdc. post out list of processes here. We will tell you what else it could be. Which procs are required and which you can safely kill.
There is no tweak to stop the pop up question. You can run a script which would wait for it and always answer yes, but that's not proper solution
reply
Hello,
If you have an script what always saying NO, it is perfect.
Here are the proccesse that are running:
NK.EXE
filesys.exe
tmail.exe
device.exe
SAPSettings.exe
gwes.exe
shell32.exe
services.exe
connmgr.exe
cprog.exe
QuickDail.exe
APLauncher.exe
MediaHubMini.exe
Biotouch.exe
GNAngent.exe
sddaemon.exe
repllog.exe
TaskManager.exe
TomTom Navigator.exe
Do you know what procces is causes the note? maby i can kill it..?
These you can kill safely:
in order what I suppose could cause your trouble.
GNAngent.exe - google nav
APLauncher.exe
MediaHubMini.exe
QuickDail.exe
SAPSettings.exe
Biotouch.exe
these below are just standard winmo apps, shouldn't be doing problems, but you can close them for a try:
connmgr.exe - comm manager
tmail.exe - mails
repllog.exe - activesync
sddaemon.exe - speed dial
cprog.exe - phone functions
can't kill:
services.exe
device.exe
shell32.exe
gwes.exe
filesys.exe
NK.EXE
===
use the same proram for closing app, upper toolbar on bottom, 3rd icon from left. close all except those I wrote you can't and give it a try.
it should help, then you need to find out which of them is trouble maker and remove start command of it.
If this won't work, I can send you that script.
Not working
Hello,
I have killed all the proccess:
GNAngent.exe - google nav
APLauncher.exe
MediaHubMini.exe
QuickDail.exe
SAPSettings.exe
Biotouch.exe
connmgr.exe - comm manager
tmail.exe - mails
repllog.exe - activesync
sddaemon.exe - speed dial
cprog.exe - phone functions
But no results, i recieve again the note... to close tomtom. Please can you send me the script. So i can try it.....
Script
Hello, Iam running TOMTOM v7.915 with Windows Mobile 6.1 Pro.
Look also in the attachment, for the picture..
tomtom82 said:
Hello, Iam running TOMTOM v7.915 with Windows Mobile 6.1 Pro.
Look also in the attachment, for the picture..
Click to expand...
Click to collapse
try the new version first,
for this script you need to install mortscript (cab\mortscript-ppc.cab). then copy file RunTT.mscr from runTT.zip to windows folder and .lnk file to windows\start menu\programs
I have no idea if it will work though. there is commented out another option for pressing the key, try to switch them if it will not work like it is.
Hey guys.
Was a solution found to this? I too use TTNavigator7 on my motorbike and have the same problem with WM6.5 closing TTN after 10 minutes. WM6 asks if I would like to close Navigator and if I don't answer, Navigator is closed and then the phone goes into sleep mode after the normal sleep timeout.
Of course, I could power up the phone when on my bike using a USB cable, but that would negate the benefits of the Bluetooth receiver that I've just attached to my intercom system on my Harley.
The HD2 was an upgrade from a TYTN II running TTN6. The timeout problem did not occur with that combination!
I've tried to stop the problem using Keepawake and Deltalock but neither works (I used Deltalock successfully on my previous phone).
I so hope that there's a decent solution to this problem.
Neil
papo said:
try the new version first,
for this script you need to install mortscript (cab\mortscript-ppc.cab). then copy file RunTT.mscr from runTT.zip to windows folder and .lnk file to windows\start menu\programs
I have no idea if it will work though. there is commented out another option for pressing the key, try to switch them if it will not work like it is.
Click to expand...
Click to collapse
Hi Papo
I've installed MortScript and tried out your RunTT script. Mortscript seems to not be recognising that Windows has displayed the notification. I suspect that it may be because it's a notification rather than a full window - does this seem likely to you?
I'm sure that this is where the problem lies - I've added lines to the script to display debug messages and the code to respond to the notification is never getting executed.
Is there any way that you can suggest to trap the notification within Mortscript please - I haven't used Mortscript enough to know where to look next.
Thanks
Neil
Hi Guys
I've cracked this problem - I couldn't do it by trapping the notification, so I attacked it a different way. The attached script just counts how long TomTom has been in background and then makes it the active window every nine minutes to stop the timeout.
If external power is used, or if TomTom is brought to foreground, then the counter is reset and the counter is only restarted when the power cable is unplugged or TomTom is sent to background.
The process relies on the KeepAwake program. The script will automatically load KeepAwake if it's not running.
It's my first Mortscript, so it may not be coded the way experienced scriptwriters would write it so if anyone wants to suggest improvements, then I'll be happy to take them on board.
When I'm out and about on my bike, I use a program called deltaLock by Christophe Sommer to lock the screen. I set deltaLock to use the HTC back button to unlock and Lock Mode set to "black screen" (I used this on my Tytn II with TTN6).
Happy to receive any feedback
Neil