Original AT&T ROM image? - Touch Pro, Fuze General

CAn somebody point me to the original ROM Image coming from AT&T? I need to re-image the phone for warranty reasons.
I have found the Radios but not the rest of the software image.
Thanks for your help.

found , pls ignore
found it on Wiki.

flashing back to att for warranty compliance
Oh you found it. Well in case you and whoever else lands on this thread need the original radio and bootloader as well grab it from the warranty section of my site - http://blownfuze.org/index.php#12 - user xda pass xda.

Related

Anyone been successful flashing back Tilt from HTC to ATT ROM?

I was just wondering if anyone had been able to reflash back to the ATT Rom for the Tilt, because I am a bit paranoid of getting screwed out of my warranty coverage. I looked in the threads and couldnt find anyone who had attempted this, just hypothetical situations of changing the vendor ID in the NBH file.
Yes, I had no problem.
Did you have to perform a CID unlock to move to the HTC ROM? I believe that alone voids your warranty if ATT catches it.
search for a post by me...
I'll see if I can find the thread, and perhaps create a new one.
The steps for reverting back to the ATT ROM and bootloader are in that post.
Update:
I posted a new thread:
http://forum.xda-developers.com/showthread.php?t=335568

how to dump spl + rom of german t-mobile vario 3?

hey there, hope anybody got a hind or something in charge...
i like to flash another rom and unlock my device but in case of warranty issues i wish to be able to restore oem status (os, rom, spl, whatever).
i have already read about restoring but t-mobile didnt released an official software update yet and i couldnt find anything on the net.
i would be gratful on every help
i sent you a message
Bluntastic said:
hey there, hope anybody got a hind or something in charge...
i like to flash another rom and unlock my device but in case of warranty issues i wish to be able to restore oem status (os, rom, spl, whatever).
i have already read about restoring but t-mobile didnt released an official software update yet and i couldnt find anything on the net.
i would be gratful on every help
Click to expand...
Click to collapse
Would love to know the same. Any help?
Thanks
You can dump a ROM using itsme's utils: http://forum.xda-developers.com/showthread.php?t=334680
And re-construct it using jcespi2005's guide: http://forum.xda-developers.com/showthread.php?t=337066
Then re-flash it to your phone.
Thanks
Dave
But you can't dump the original bootloader with this method!
I don't know if the t-mobile bootloader is modfied in any way, but actually the original HTC bootloader should work.
Does anyone know, if there are differences between the bootloader of t-mobile and the original HTC bootloader? (which has to be used for restoring, because there is no dump of the shipped t-mobile bootloader)
floeti said:
But you can't dump the original bootloader with this method!
I don't know if the t-mobile bootloader is modfied in any way, but actually the original HTC bootloader should work.
Does anyone know, if there are differences between the bootloader of t-mobile and the original HTC bootloader? (which has to be used for restoring, because there is no dump of the shipped t-mobile bootloader)
Click to expand...
Click to collapse
If the versions of the SPL are the same then they will be the same.
If you have the Orginal T-Mobile ROM from there website you can dump the SPL using this method: http://forum.xda-developers.com/showthread.php?t=335568
Ta
Dave
http://www.t-mobile.de/fremdcontent/1,2790,123254,00.html
here you will find the official update to 6.1 (3.31.111.4) with a 1.70.18.2 radio
the rgb-screen tells me following:
KAIS130
SPL-1.56.0000
CPLD-8
i dont have any clue about risking warranty by flashing an extracted spl of the htc original rom...
the page adviced by first-test seems to be the one of choice thanks, dude just wondering why i did not found this before
does somebody knows about possible differences between the bootloader contained in this link and the one that came with the device?

Meaning of AT&T Fuze Unlocked .....

Hi there,
I am pretty new to the forum and I havent had much experience with locked / unlocked devices so my question might be a bit naive.
I wanted to buy the AT&T Fuze from ebay and the offer says its unlocked.
Does that mean I can use it in Pakistan and Middle East. And secondly, can I change its ROM to the standard middle east rom version.
I ll be thankful if someone could guide me regarding the problem.
Thanks
yes you can
unlocking your phone will allow you to use your phone with another service provider (instead of just At&t).
You can change your ROM regardless of whether your phone is unlocked or not.
I'll get specific for you.
1. Sim unlocked
(the most common unlocked terminology) means you can put any sim in the device and use that carriers network.
As far as ROM flashing goes (don't get the two confused)
2. Security unlocked and Hard SPL.
Hard SPL is for flashing a ROM, However since you live outside the U.S. you might want to flash a Radio, This is were Security Unlocking comes into play.
If you want my recommendation, Use "Olipro's" unlocker in the Raphael Rom Development section. It is worth the money and very easy to use.
trancer_84 said:
unlocking your phone will allow you to use your phone with another service provider (instead of just At&t).
You can change your ROM regardless of whether your phone is unlocked or not.
Click to expand...
Click to collapse
I really hope no one reads this post and just decides to take a Stock Fuze and flash it without HARD SPL.
thanks for your comments..
really informative ..
but can anyone please suggest some thread for explanation of terms like hard spl and radio etc ...
fahadriaz49 said:
thanks for your comments..
really informative ..
but can anyone please suggest some thread for explanation of terms like hard spl and radio etc ...
Click to expand...
Click to collapse
I already did, read post 4
Everything you ever wanted to know is in the WIKI.
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael

3UK Mobile

My HTC Kaiser has to go back to 3 for a repair, however Since I have modded the ROM they will not repair it.
Is there a way of getting the original 3 software ROM so that I can send it back with the 3 ROM already installed as oppose to the non branded ROM?
My son also has a Kaiser with the original 3 ROM installed. Is there any way I can take a copy of this from his phone and put it onto mine before I send it back to them?
Probrably not, but I thought I would ask.
Any help for me would be much appreciated.
Reverting back to the AT&T or HTC ROM and SPL for Warranty or return
http://forum.xda-developers.com/showthread.php?t=335568
The 3UK Kaiser rom dumped Koolvin Click below:
http://rapidshare.com/files/143861959/KaiserUKThreeReconstructed.rar.html
Radio Version Radio 1.27.15.32 to go with it Click below:
http://www.mediafire.com/?9bc1srjbrdz
Flash those 2 babies to your phone and you should be good to go.
PsiDOC
More answers than I can shake a stick at.
Thread closed.
Ta
Dave

[Q] Did Rogers ship me a Developer model?

OKAY, so I was shipped 2 models, wasn't sure why, anyways Rogers wanted me to ship one of them back, I did so. All is well for about 2 weeks, now I've been trying to root it, and I managed to get to the bootloader and some other things, but while I went into recovery it just said 'This build is for developement purposes only Do not distribute outside of HTC without HTC's written permission. Failure to comply may result in legal action' and it wouldn't start up into the recovery to get to superuser or whatever. It just had a logo with that on it... Is this my cells problem or could it be a problem with the recovery? Thank you in advance! Also I know this is for AT&T but there is no where else to ask for help :?
Call Rogers and tell me about it if you are having issues. tell them what is says and im sure they will send you a new phone. And this forum is for both, Att and Rogers.
ibCONNOR said:
OKAY, so I was shipped 2 models, wasn't sure why, anyways Rogers wanted me to ship one of them back, I did so. All is well for about 2 weeks, now I've been trying to root it, and I managed to get to the bootloader and some other things, but while I went into recovery it just said 'This build is for developement purposes only Do not distribute outside of HTC without HTC's written permission. Failure to comply may result in legal action' and it wouldn't start up into the recovery to get to superuser or whatever. It just had a logo with that on it... Is this my cells problem or could it be a problem with the recovery? Thank you in advance! Also I know this is for AT&T but there is no where else to ask for help :?
Click to expand...
Click to collapse
If you haven't installed a custom recovery image, definitely call Rogers. If you *HAVE* installed a custom recovery image, this is normal, and do NOT call Rogers, as they obviously won't support modded software.
Also, this forum is indeed for the Rogers One X as well, so you're posting in the right place. It kinda upset me when they changed the forum title from One XL to AT&T One X. Occasionally people give me flak for posting about my device, being all "yo bro, we're talking about the AT&T model if you haven't noticed."
It's the exact same hardware, save for the branding. The software is only slightly different. I imagine once we get some Rogers updates and a greater ability to flash custom ROM's and kernels, most of the ROM's will be based on Rogers, since AT&T has blocked some things like toggling LTE and stock tethering.

Categories

Resources