Hi to all,
I have a irritating problem when I try to connect my Trinity with Sony car radio via bloetooth. Everything goes ok, but after connection and after making first successfull call (no matter if I call or if somebody calls to me) the PDA becomes silent permanently. No sounds at all, even when I try to listen a music. Also when I call to someone, the person on the other side also can't hear me. I need to make softreset to have any sounds. Any ideas?
Thanks in advance
Related
I decided to open a new thread although there were several threads on the use of bluetooth headsets. My intent is to explore whether there is a particular sequence that we need to follow when operating the XDAII and BT headset. I am using a Ericsson HBH-65.
First observation:
I notice that I need to end all calls via the bluetooth headset rather than from the XDAII. If I end a call using the XDAII (ie depressing the red button), for subsequent calls whether incoming or outcoming, I cannot use the headset. There is no connection between the 2. I seem to be able to simulate this almost 99% of the time.
Second observation:
I normally switch off my BT headset overnight for charging purposes etc. At the same time I deactivate the BT settings on my XDAII.
The next morning, I would activate the BT settings, BT profiles and then switch on my headset.
I notice that for the first call I made/receive the next day, I will have problems using the headset. I am not quite sure whether it is the case that I need to switch on my BT headset first and then the XDAII BT settings and BT profiles. I say this as to resolve the problem, I seemingly need to deactivate/activate the BT profile settings before it works and then for subsequent calls I would have no problems using the headset. This needs further testing to test my hypothesis.
Anyone notice anything different on their part.
regards
Same issues
I have had the HBH-65 and have noticed the same issues. I have also had an Logitech and did not have any problems with that.. I am guessing the issue is with the firmware on the HBH-65.
I use Bluetake GII with my xda2. No sequence, no problems. I never even think about switching it on or off. Works in any sequence. Nice looking too! :wink:
I have a Jabra 250, and I do not have to follow any ritual to have it to work fine
I have a Logitech Bluetooth headset with my Qtek 2020 (rom 1.60.21), and it works like crap.
First of all, the headset wont turn on/off sometimes.
Second - if its turned on, and the qtek has been turned off, i need to reconnect it, to switch automatticly when recieving a call.
Thirdly - both speak and hear is very poor quality/fare away (very silent) even though ive turned the volume to maxx.
BT Headset - Works Flawlessly
I have a Sony Ericsson HBH-30 headset and I never give the slightest thought to sequences or procedures. I can turn the headset on and off, the profile on and off, even the BT stack on and off - without ever having to re-bond or anything else.
Now if I could just voice-dial a call with the bloody thing I would be truly happy indeed.
Same problems but getting it figured out
I have the HBH-65 and it seems to work fine now that I've hopefully figured it out. I do a few things. First, I leave the Bluetooth on, on my i-Mate. Second, once it's in range I've noticed it takes about a minute for it to link up. When it links it either makes a single beep (if I just turned on the Headset) or a quiet click if it was already on. I doesn't work ALL of the time, but the more I use it the better it gets. I really expected it to be a little easier.
I have the HBH-200 with call display...which the salesman assured me that it would work with my XDA 2! Call display does not work, and if I end a call on the O2 the headset will hang. Other than that it's great!
I Have a XDAII and a HBH-35
They key to it seems to be not to turn anything off ! it's really frustrating when you think it's all linked up and then get in the car only to recieve a call and not be able to answer it with the headset.
If I have turned the headset off it's a right pain to bond again, red, green lights, funny beeps it's very confusing !
Once it's bonded it's great ! I am amazed with the call quality.
I have an Sony Ericsson HBH 35, I have no problem w3ith the bluetooth pick up call are end calls.
I can even transfer call from my bluetooth to the handaset and by reverse pick up call on my handset and then transfer the call back to the headset all I have to do his to hold the button on the headset fro a few second and the call transfer from the handaset to the bluetooth headset no problem.
Great piece of headset I would really reccomended it to anyone.
The rom on my XDA II is still the version 1.05
Regards
Gigino
Cheers Gigino
Do you ever turn your headset off or disable bluetooth?
I don't have any problems when it's bonded. Just problems if I turn the headset off to save battery
I only turn the headset off at night when I charge it. I use to swwitch off the headset but not anymore becauswe if it is on it use very very little power so it last all day with no problem.
The bluetooth on the XDA II I have never turn it off since I bought it 5 month ago the bluetooth headset on the XdA II is always on.
I've try it switch it of and then on the bletooth and the bluetooh heaset on the XDA II but when I turn it on and turn the headset on it all works fine.
They is no issue on the headset I've tryed every diffrent combinetion the is and the headset works fine.
I have never needed to rebond the headset with the XDA II.
The only thing I have not try is if I can receive a second caller.
Mean trying to switch between 2 caller when I have the chance I will try it.
Regards
Gigino
cheers
Hi guys!
I am a little confused by all the names this little phone is called, so i hope this is correct thread.
I can connect the headset and listen to music using WMP. I can answer a call while i´m still listening to music(it pauses), but when it switches back to the player the sound is gone. All calls works but I can´t listen to my WMP. After a soft or hard reset i work again, until it rings again.
I´m using the tornado patch posted by kyunga and khuanchai(.reg import)
If someone know anything, please tell me...
//Johan
I have a ds-970, and I have tested motorola and nextlink spider bluetooth stereo headsets. The problem you are experiencing is specific to the ds970, moto and nextlink automaticallys switch back to wireless stereo after call. w/ ds970, only thing that I have found to fix this is to manually activate wireless stereo (comm manager, bluetooth settings) after a call. yeah, that is a pain.
Thanks for the info. Well, I was hoping that there would be some sort of adjustment in the .reg department.
You just can´t win em all.....
Edit: I found a solution... I tried Crossbow_Reloaded(WM6) and now it´s working... The sound is a little bit distorted in the upper freq. range though, but hey...you just can´t win em all
Hi!! I have some problem with my vox + HBH-DS970 headset. I can't redirect incoming call sound from phone to headset
With my previous phone i change "capability" parameter (4-th bit by 0, like 110101)
But "capability" parameter in Vox is 7 bits lenght!
I'll try to set 1110101 (117) and 110101 (53), but it doesn't work!
while incoming call, i hear phone but not headset
Anyone can help me with advice?
bt headset prob
I have an xda2 i and I have the problem that even when the headet is connected, at times an incoming call won't broadcast over the headset at all, and equally if i dial out the call doesn't transfer to the headset.
Curiously, I've found the solution is to go into bluetooth manager -->active connections--> and click on STATUS of the head set connected. it should show signal strength and such. I double click on the CONNECTED message (oor maybe somewhere on the screen, basically double tap until it reads NOT CONNECTED ..... as odd as it sounds... this is what i needed... as when I do this, it usually works ok for me.
Maybe it will help?
..........IB a n e
this is smart, so there is no any bluetooth manager on it
and my headset can play any sound from phone because it is A2DP and i'm continuosly use it
i have one way to solve this - JetWare BT-Extension. In this programm i can check "use phone ringtones" and that works OK
but program unstable, so i want to get this future by regisrty edit
How do I transfer a call from bluetooth speakers to the phone with tasker? Cant find any parameter for tat action :/
Why: When in car I want the calls to go through bluetooth handsfree system, but if its a private call and I have company in the car I would like to be able to pick my phone up from the dock and then the call should be transfered to the phone automaticlt even thou the bluetooth still is connected.
How do I do this?
Thanks in advance
/Max
The way I would do it is have a script to turn off bluetooth when there is an incoming call and it is removed from the dock (by the way what do you mean by dock?) and then re-enabling it when the call ends.
Good thought, but its like walking around the problem. Ill try if my car likes me to switch on and off BT or if it will refuse to reconnect.
Dont need a script for it, tasker have defaults to just turn of the BT in this case. But it would be a hell lot easier if I could just re route the sound since there are buttons for it on the darn phone
A dock... the holder with included charger for my mobile in the car.
Regards
/Max
On htc phones if you answer from the bluetooth the call will take place there but if you will answer from the ohone the call will be directed on the phonespeaker
I also have this problem but in opposite way. I want that when my phone has the autoanswer enabled the call to remain on the bluetooth which is not happenning and when i am riding the motorcycle is difficult to answer from the bluetooth device
lhoria said:
On htc phones if you answer from the bluetooth the call will take place there but if you will answer from the ohone the call will be directed on the phonespeaker
I also have this problem but in opposite way. I want that when my phone has the autoanswer enabled the call to remain on the bluetooth which is not happenning and when i am riding the motorcycle is difficult to answer from the bluetooth device
Click to expand...
Click to collapse
I havnt tried, but this app looks promising for you: https://market.android.com/details?id=com.everysoft.autoanswer
//Max
Thank you, I tried this but is not working as I wish, because when is answering the conversation is transferred automatically on the phone!
Anyone have this problem or have an answer for me.
My Sensation connects automatically to my car handsfree system (Honda Accord) and mostly works fine.
The problem occurs when it disconnects and I`m away from the car. Whenever I make a call the loudspeaker turns on and I have to manually turn it off before taking or making the call.
Also, when somebody rings me the phone doesn`t ring, it just makes a quiet beep so I miss a lot of calls. the only way I can stop it is to restart the phone, I can`t find any settings to solve it.
Don`t know if its related but I have Carhome ultra and Vlingo installed but the problem occurs whether or not I run these programs, I only have to connect to the cars bluetooth system.
Nobody else have this problem? Or able to offer any clues as to why it might be happening