Connection settings & download data - Touch Cruise General

Is thare a way to config the weather and mail sincornization depending form the connections?
ex: if the pda is connected to internet via WiFi than check automatically Email every 10 min and downaload weatehr data every hour.
if non wifi do not check autamatically
this because I havn't a flat internet connection trough umts or gprs and when I'm in office or at home I got a wifi connection

Related

Wifi before gprs for email +web

Hi all - i have my xda mini s setup to connect to the internet and collect my exchange emails all works fine.
i use it at work + at home a lot and both locations have a wifi broadband network.
i would like my xda mini s to only connect to GPRS for web browsing and emails when a stored wifi network is not in range (eg when im on the road)
Is it possible to enter in this preference anywhere? thanks in advance for any help
Actually, as far as PIE or any program that connects to the internet is concerned WiFi takes precedence over GPRS by default.
The problem is MS push mail. It forces GPRS even if WiFi is connected. If you try to serf to a graphics heavy site wile connected to both GPRS and WiFi you will see the speed difference.
I am not sure what the logic behind this MS stupidity is, and unfortunately I don't know of any cure except deleting the GPRS settings.
hi - and thanks.
damn.
well i did have a qucik test i went on the web and it seemed to be connecting to gprs (while i was already connected to a wifi network)
i will have a play.
There's one other thing I forgo to mention:
When connection to WiFi make sure you select the correct value under "This network connects to".
I assume your GPRS settings are under My ISP and that is what's selected in Settings->Connections->Connections->Advanced->Network selection.
You should then select "The internet" for the WiFi network.

Stop GPRS being the default data connection

Hi all. Is there a way to set a priority on how my pda tries to connect to the internet. At the moment it always tries to use the GPRS, I have to change the network it uses from tmobile to my isp just to stop it! Is there a quicker way of doing it than having to go into my connection manager?

Wifi On but IE dosn't work

I have 2 questions:
1. Internet over wifi doesn't work. I think wifi is working fine, becouse conmanager easiliy find my home AP and conect to AP.
But IE dosn't working at all over wifi,and over usb(activsync) IE working fine. Any solution??
2. Can i use activesync over wifi or join to my local network over wifi?
I have Qtek 8310
ROM: Greek WM6 ROM v5 by NiTroGen
OS: WM6 5.2.1616.18120 - Radio: 02.61.01 - SPL: 2.00.0014
budy wi-fi connection has some issues, that it gets connected with pc, or ppc, coz the connection settings are stored in router.. but as the connection remains down so IE wont work atall..and on wi-fi router u cant guess net connection is working or not.. check with ur net connection..
malhaar said:
.. check with ur net connection..
Click to expand...
Click to collapse
i think i don't understand u...
i can connect my laptop on my AP,
solution is maybe in aplicatio "Tornado Wi-Fi Settings "
siouxNS,
I had similar problem on XDA IQ. WIFI was connected to the AP, but IE was stuck in 'locating', and after some time (about 1 minute) error message appeared. I noticed, that when pinging my phone IP from laptop (also in my home network) few pings were ok (just after wifi connected to the AP), and rest of them timeouted. Sometimes, but very rarely, all ping responses were ok (I used ping -t on windows).
So, what I did to get wifi connection working:
1. started IE, when wifi is off
2. started wifi
3. shortly after wifi connected to my AP, I opened some internet page in IE (try to use one, that is not cached) - and it worked
And this works for me every time now.
Few more things:
- check that IE uses the same connection, to which wifi is assigned.
- you can use WLAN IP manager to manually set your IP, gateway and DNS servers
- my system is: windows mobile 6, OS 5.2.318, build 15341.0.0.1
hey guys,
I have the same problem. just flashed the new v3.6, can connect to the router, can even ping the mobile from my laptop via wlan, but still get the no connection error - from IE and opera.
what can I do?
EDIT:
finally got it. just had to change the type of internet from 'private/work' to 'internet'. thats it. stupid comment about vpn under it confused me...
fikol5 said:
siouxNS,
I had similar problem on XDA IQ. WIFI was connected to the AP, but IE was stuck in 'locating', and after some time (about 1 minute) error message appeared. I noticed, that when pinging my phone IP from laptop (also in my home network) few pings were ok (just after wifi connected to the AP), and rest of them timeouted. Sometimes, but very rarely, all ping responses were ok (I used ping -t on windows).
So, what I did to get wifi connection working:
1. started IE, when wifi is off
2. started wifi
3. shortly after wifi connected to my AP, I opened some internet page in IE (try to use one, that is not cached) - and it worked
And this works for me every time now.
I will try that
Few more things:
- check that IE uses the same connection, to which wifi is assigned.
its ok
- you can use WLAN IP manager to manually set your IP, gateway and DNS servers
Click to expand...
Click to collapse
whatkind manager u use? i use "tornado WI-FI settings"
on home network i use static IP's
adsl router, 192.168.1.1 (gateway)
wirelles AP 192.168.1.252
phone is connecting with 192.168.1.5 ,
can i use DHCP and DNS?
one more thing, when i go in some caffe with hotspot i don't have any problems with connecting and surfing.

hotmail connected via cellar when wifi is available

Hi there,
I have a question about an annoying problem that I've only managed to find one (unanswered) question to on the web.
I have an HTC Touch HD (WM6.1) which I use to read email from my Hotmail account, amongst other things. The problem is that the messaging client ALWAYS tries to download my mail via 3G/GPRS even when there's a WiFi connection available. This occurs both when I initiate the send/receive using TouchFlo 3D or from within the mail client.
Connection manager is, as far as I'm aware, configured correctly, and PIE/Opera/weather will all happily use WiFi to connect to the internet, only using my data connection when WiFi isn't available.
The same results occur with connection manager configured in either of the following ways:
Internet Connection = "My ISP" settings with 3G modem connection
Work Connection = Default "My Work Network" settings
WiFi Access Point = Connects to Internet
Network Card = Connects to Internet
OR
Internet Connection = "My Work Network" with 3G modem connection and "This network connects to the internet" enabled
Work Connection = As Internet Connection
WiFi Access Point = Connects to Work
Network Card = Connects to Work
Interestingly, if I disable my data connection and enable WiFi I CAN send/receive mail over the WiFi connection, so it seems like the data connection is being used in preference to the WiFi one.
Is this a known issue or am I doing something wrong?!
Thanks,
Mike
What´s the version of your ROM?
Is the device labeld by Vodafone?
There is an option when setting up the email account in pocket outlook to select the preferred connection for the account. It is in one of the advanced options pages when setting up the account. Normally it is setup for THE INTERNET so your WiFi adapter should point to the same.
Now, I use a little Mortscript to switch-on the WiFi and immediately change my Network Selection to NO DATA, which is just an empty setting (no internet connection). This effectively shutdowns the GPRS / 3G connection and pocket outlook has to use the WiFi route.

Wi-fi connection in the connections tab

Hi, I am using a Spectec wifi card to receive mails and navigate when i'm at home, and a data gprs connection outside. Since the wi-fi connection does't appear on the connections tab, is there a simple way to switch between them?
What i am doing now, is change the "work network" (which is configured for gprs) to "my isp", which is not configured at all, get a few connection error messages, and then the phone discoveres the wifi and connects to internet. But it's rather complicated and not ellegant at all.

Categories

Resources