Im asking on behalf for a friend that just got an att fuze (raphael) for a cab to enable hsdpa on his device.All he gets is 3g on top,I live in Florida and he is in New York so I physically can't input reg entries for him plus he's new to the whole pda thing so it's like blinding leading the lost lol.Also as a bonus ,enabling the band tab in phone so he can switch between wcdma/gsm.
Here you are.
Thanks,sent it to my friend,ill find out later if it works 4 him.
Just make sure he's registered to download the attatchment (unless you uploaded it for him).
thanks for the cab
I really appreciate the cab bro, just got the fuze today and im enjoying it, im just have a little problem conecting my computer to the phone's internet via bluethooth, any suggestions?
Thanks the cab file works great so far. Hopefully i don't run into the problem with the kasier.
Related
If this has been covered before and is known to work then feel free to lock or delete the topic
Apologies if this is common knowledge but I spent an entire day on this on Wednesday without any joy but have just managed to crack it and get my phone talking to my TomTom via GPRS and thus re-enable all my TomTom plus stuff.
Okay, so the key here is application unlocking the phone.
Because the Vodafone v1415 is still pretty new in the UK (and therefore I guess uncommon) all the instructions I could find refer more explicitly to the HTC S710 and it has been a bit unclear exactly how much or how little Vodafone have monkey'd about with it before selling it on.
I've managed to establish that they've done quite a lot! And it's certainly appllication locked.
I just went through the thread about removing a lot of the branding but the bit that didn't work was the registry editing as I just got Acces Denied. After a quick search I followed the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=280710
And got my phone un-application locked. I suspect this is not 'unlocked' as in how most UK people find their phones to be SIM locked (not Vodafone incidentally) which is why I continually make the distinction.
After then successfully editing my registry so as to change the appearance a little I then wandered if it would have any impact on what I was trying to do the other day about the BT DUN issue (or lackof).
'Lo and behold I reinstalled the cab file (WM6_BT_DUN.cab) that I had found in a thread on these very forums, rebooted the phone and bingo, the TomTom then connected (which it did before), the phone gave DUN as a capability (which it did not before) and everything proceeded as it used to with my Nokia 6230.
You'll need to search the forum to find the thread with that file since I can't remember where it came from but it was a hot topic so I really doubt it will be at all hard to find.
I'm chuffed since that was a real show stopper and I was going to return the phone and cancel the contract but now in one afternoon I've got rid of most of the crappy branding and resolved the last issue with it
So, big thumbs up again to these forums and to offically mark the WM6_BT_DUN.cab down as working with the Vodafone version of the Vox as long as you unlock it first as above.
So, now that I've finally covered all the setup of my phone I can get down to some of the developy type things that I bought it for in the first place (well, free on contract but hey!)
Oh, probably worth noting that I did all this on an iMac too (with a little help from VMWare here and there)
The CAB is available at http://forum.xda-developers.com/showpost.php?p=1351044&postcount=21
DUN
...does anyone know if the Cab files has been ammended yet to deal with the issue of once a DUN call is made...it keeps the connection open until the phone is reset?
In this case, Activesync via GPRS does not work ( get a message about "cannot connect whilst a voice call is in progress) and I;m also worried about the cost of the DUN call charges?
bennyk said:
...does anyone know if the Cab files has been ammended yet to deal with the issue of once a DUN call is made...it keeps the connection open until the phone is reset?
In this case, Activesync via GPRS does not work ( get a message about "cannot connect whilst a voice call is in progress) and I;m also worried about the cost of the DUN call charges?
Click to expand...
Click to collapse
Can anyone help with this.
I use activesync to connect to MS Exchange at work for MS Outlook email. I was looking to install the BT DUN workaround on my Vodafone v1415 so that I could access the TomTom Traffic service with my TomTom GO520. If I install BT DUN will it break my GPRS connection used to Sync with MSExchange at work.
Can yuo tell me which directory you need to copy the CAB files to on the phone?
Hi,
New to the forum, I found it while looking for an upgrade from WM5 to WM6 for my 2125. A fantastic source of information! I upgraded to Phil's Windows Mobile 6 for Tornado BETA, and everything went smooth as silk... until I disconnected from ActiveSync. I have full Internet access through ActiveSync with my laptop, but as soon as I disconnect the Internet connection fails. The phone works fine, and it pops in and out of the Edge network just like normal. I read though the beta thread, but nothing sounds quite like what I'm experiencing. Other than Internet, the phone and all the other features work perfect!
Any suggestions, oh wise ones?
Thanks,
- Steve
* whew * finally figured it out... I needed to add back in all my Cingular network settings...
Here's the Cingular instructions for anyone else who is upgrading their phone and neglected to copy down all network settings beforehand...
https://cingular.atgnow.com/cng/tutorials/KB56473.html
Thanks!
- Steve
Hi guys,
I've got an AT&T branded HTC 8900 (tytn II, kaiser, what else).
Using it in Italy, with 3G provider (Wind).
I've updated it with Dutty V3. and radio i tried 1.27.12.11, -.17, -11.31... and my 3G (neither GPRS) connection doesn't work. When i try to connect the modem suddenly i get the “The answering modem has disconnected” than the “There is a problem connecting to the GPRS service in to your registered home network” messages.
Before the update, the modem had worked fine with 3G connection, with original AT&T ROM.
Any suggestion?
TNX
ALEX
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Brevi said:
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Click to expand...
Click to collapse
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Did you try disabling HSDPA?
Fixed!
duttythroy said:
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Click to expand...
Click to collapse
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Thanks Dutty! I tried your suggestion. I think it's a little better now but I still think the connection was more responsive in No.7 Rom. For example, when I log on to ICQ with IM+ it used to go straigt to a green "connected" icon. With v3 i get a yellow "connecting" icon for about 15 seconds and then the green one.
My new Sim card just got activated, but made no difference.
It's not that big of a deal for me, as my connection basicaly works.
I will test connection stabilty in he next couple of days.
Other than that v3 is great!! Thank you Dutty!
Are you planning on releasing a new Rom anytime soon?
Have a nice relaxing weekend Dutty!
eiem said:
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Click to expand...
Click to collapse
Sweet!!!, I was having problems not being able to access the internet via PIE, but could using Opera...it was driving me Bonkers!!. This worked..
However, i'm still not able to access tom tom plus server!!, any ideas?
Hi! I reflashed v3 and everything seemed fine again. However I now have a problem where I can't call or receive calls when on UMTS. All is fine when I am on GSM.
I tried Alex's Multimedia Rom (1.56)...same story there.
I now flashed the HTC Rom that came with my Tytn II and so far (2 hours including several test calls) everything seems normal again. Will try to flash v3 again maybe tonight.
Starting to see everything in tricolor ;-)
Greetings from Aachen, Germany
Brevi
Nope problems catched up again...does anybody know, if it is better to remove the sim and/or turn off the phone radio before flashing radio roms?
Thanks! Brevi
Dear all,
maybe this is the same problem?
http://forum.xda-developers.com/showthread.php?t=335074
Is the hidden proxy also installed in a vodafone Rom?
Thnx Max
sounds familar
hi,
please see other posts by me(any way to link these threads moderators?) for other threads with similar issues. To clarify, if you revert back to your original rom, your 3G and phone calls work again? I started having problems with my 3G and phone functions about a week after I got my AT&T tilt..but after I changed to one of dutty's roms.
If I disable 3G via the comm manager, all works well, voice and data etc, but I can only do edge speeds. Unfortunately, I live 15 miles from the nearest 3G area so its hard fo me to experiment with roms and settings.
Also, to confuse things even more, one 3G area will still work for me while the network closer into to the Boston metro area won't, leading me to think that a network provisioning upgrade in the Boston area may be looking for something in the original AT&T rom that is now gone. I'm hoping not and that a phone upgrade or mother board swap will fix it(as others are reporting). I should do a revert back to the original rom and drive to my "test" area and see if 3G comes back...that would suck if it does...the stock roms are awful and about 5 years behind the time as far as user interface...like my old Ipaq.
I really like the dutty roms and may just live with edge speeds(dutty a donation will be forth coming once I settle in on a solution dude ).
rich
I guess I tried everything by now...diffrent roms including HTC stock rom, radios, flashing radio with sim in/out.
But the problem always comes back.
About to call HTC support and send my Kaiser in for repair.
Hope it won't take too long, I am addicted to this fine device.
Already charged my old Hermes today. Oh my god the Kaiser is sooo much better compared to the Hermes it almost made me laugh ;-)
Hey guys, i've seen a number of different threads which "kind of" talk about this issue. I'm hoping to make this the definitive one. I'm on hour 10 of working to try to get this running..
(My apologies in advance if there is already one out there that i haven't found. i have been really looking and i think i tried it all... im sure thats what everyone says )
Hardware: HTC 8925 a.k.a At&t Tilt a.k.a TyTN II
Software: Duttys Official WM6.1 Release
Radio: 1.64.06.04
Provider: At&t (US)
Problem: BlackBerry Connect's "Identity" Tab reads "PIN: Pending"
I should also mention that i called At&t to confirm (prior to all of this) that i have a BBConnect service plan, it is active, and there is nothing on their end that would indicate a failure of any sorts.
Attempted Fixes (These have ALL failed):
I've tried every combination of having active sync enabled and disabled during bbconnect install.
I hard reseted before every install. Soft reseted after issue still occurred even after bbconnect install rebooted.
All tests were performed with the the HKLM\System\Versions Aku set to .0.4.2 as per Dutty's wiki: (http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser)
I also tried various combinations such as .0.2.0 and .0.3.6 and .0.3.0
Even tired changing Device ID to HTC_P3450
Tried all of the following BBConnect software downloads:
4.0.0.84:
http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90:
http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
Tried installing this one both by copying cab file over to local device and through device web browser:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
I'm installing from and installing to the local device memory, not the storage card..
i think i covered it all... oh, i didnt try the one HEX edit solution, because i didnt think its applicable to dutty's rom..
can ANYONE please help?!
---------------UPDATE--------------------
Okok...so problem solved... i thought i read something similar to this solution somewhere.. but..well whatever... frustrations are over (the problem always seems to find a way to fix itself after you post help for it! )
Process:
1. Hard Reset (set up initial settings, connect to provider, its a total of two reboots iirc)
2. Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
3. Soft Reset
4. Change Device ID to any value (Settings->System->About->Device ID)
5. Soft Reset
6. Install BBConnect 4.0.0.97 via device browser from http://www.america.htc.com/mobile/connect/8925/
7. Installation reboots system
8. Disable 3G connection, force to use EDGE via wireless connection manager
9. Device receives PIN, activates, etc..
10. Enable 3G connection
Notes:
1. So i dont know if items 2,3,4, and 5 were really required.. after preliminary testing, everything works fine with the 3g connection turned on after initial registration.
2. I noticed that the BBConnect Today icon kept showing an exclamation mark indicating its outgoing connection was being blocked. Also the status window kept showing that the connection was suspended by the user, when i never did anything.. so i tired disabling the 3G and sure enough.. problem solved..
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
wooooooooooooooooooot, thx for the solution.
Man...thanks a lot for all the help...it worked like a charm...and i am using it here in dubai...uae where the black berry doestn support the kaiser offically
cheers bro
Great work man, great work for users who uses BBConect
3G still working?
Quick question for those who tried the (disabled 3G to Edge) and then re-enabled 3g.
Does your 3g still work? Have your tried to place calls in 3G mode? I am on my third Tilt, the prior two times I lost 3g after installing blackberry connect, and I want to see if anyone else has this problem, before a try a third time.
Note: On my previous two phones all worked well when I downgraded to GPRS (Edge) as described, but I never got back 3g (even after flashing and removing BBConnect)
elec.two said:
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
Click to expand...
Click to collapse
I added this post to Dutt's WIKI and gave you due credit for your hard work.
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Strange... All I had to do with my Tilt was set the AKU to .0.4.2 or .0.4.4 in the registry before installing the BB Connect software.
I've used the .92 & .97 installers from CAB files on my SD card just fine.
If you change the AKU version after the BB software is installed, it won't work right, as it will still drop the connection. You'll have to reinstall the software.
http://forum.xda-developers.com/showpost.php?p=1903958&postcount=5
Quick Question
So to those of you who have BB Connect running, is all well with your 3G? Thanks for your help, I want to hear a few success stories before a walk down this path again
so I followed the steps, and got everything installed and turned off. I'm trying to get an unlocked tilt on my blackberry account on t-mobile.
The problem is its installed, but the email options are greyed out. We don't use an exchange server (or if we do it is configured very wrong) as I have pop3 information on my t-mobile blackberry page. It says I register successfully on the network, but I still don't receive emails. What do I need to chnage?
edit: fixed - I had to get back online and say yes that I had a new pin.
THANKS!!
lcohen999 said:
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Click to expand...
Click to collapse
that is the same problem I have left now, almost like hardware related.
does AT&T default one can do multiple APNs? as it is officaly support BBC.
I installed Blackberry Connect and I am using it with a Blackberry Enterprise Server.
But I see in order to have the BB icon, the GPRS is always attached. Should it work like this ? I know/knew that with Blackberry phones it attaches to GPRS only when incoming email is coming, and only with Microsoft Directpush technology it stays attached all the time.
If it works like this ( Always On ), is there a difference between BB Connect for WM, and Outlook with Microsoft Direct Push ?
Yours,
Alex
elec.two said:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
Click to expand...
Click to collapse
This link doesn't seem to work, it's actually supposed to be:
http://www.america.htc.com/mobile/connect/8925/index.html
The problem is, when you click "install now" it still can't find the cab. The 4.0.0.97 cab is now mirrored here:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_al_4.0.0.97.cab
desktop manager software
Do you have a link for desktop manager?
I have the version 4.x.17 and cannot connect with the bb on the pda.
I don't know which is the latest or most compatible version for desktop mgr having in consideration what you have in the pda. please, give me some light...
Thanks from a Touch DUAL user....
Thanks Elec.Two
Just added this to the Touch Dual Forum (Nike) as it works a dream for us too!
http://forum.xda-developers.com/showthread.php?t=390284
Has anybody an idea how this will work on a Pharos / HTC P3470? I just tried it described in this taks, but without success.
I had 2 dots and an x
I updated to Dutty's ROM today, and had problems with BBC.
So I searched, found this page and did exacty as told. No luck. Tried again. No luck.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM]
This worked for me. This info is for noobs, of which I am one!
I have just updated my TyTN II to WM6.1 and bbconnect (version 4.0.97) stopped working. Basically it had PIN marked as pending and was reporting no connection.
I have executed only step 2 (change hklm) and 3 (soft reset) from elec.two procedure and it resolved my issue - bbconnect works now. I have not reinstalled the bbconnect.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM
Click to expand...
Click to collapse
Well, I have to thank you on this! I could not get BB Connect to work for the life of me, and your fix finally go t it working!!!
Thanks!
.... and now for the Diamond - same old problem....
Have tried all the known fixes - I think - anyone had any success with bbconnect on the new diamond? Sigh.....
Hi Guys,
Im having issues getting the 3G long name (Shows UMTS T-Mobile on home screen when in 3G mode, and T-Mobile when in 2G mode) to show on a couple of ROMs, ive tried the following reg entries which solved the issue previously but no longer work on the later ROMs:
HKLM/Software/OEM/PhoneSetting/Enable3GLongNamePrefix=1
HKLM/Software/OEM/PhoneSetting/LongNamePrefix=UMTS
HKLM/Software/OEM/RIL/ShowSPNOnly=0
HKLM/Software/OEM/RIL/ShowSPN=0
The Connection works fine and obviously im in a 3G area.
Does anyone have any ideas as to what might be causing it or how to solve it?
Would be much appriciated!
Thanks
Jas
Does it show just T-moble?
Yes thats what im saying. Its in 3G and it only Says T-Mobile. Its a reg entry somewhere to correct it but im just not sure which one
i looked at this a few weeks back as i was noticing the same problem, it worked on duttys wm6 roms but as soon as i went to wm6.1 it stopped working, i took a dump of the reg from the wm6 rom and compared it to the wm6.1 and the keys where all set up and present in both so im not sure if its a wm6.1 thing or not..... really would prefer the display to say 3G Orange instead of orange....
I also noticed that now I’m also getting an annoying single character space before the carrier name too.....
Before when it was working i was seeing:
"3G Orange"
Now i'm seeing:
" orange"
hmmmm anyone any ideas.....?
Tell me about it!! Its driving me mad! If anyone has any solutions / ideas then please do let us know!