Related
Hello
Anyone got the SD HC (High Capacity) drivers for OMAP850/Tornado? If yes could please attache here or contact me via PM?
i don't think you'll find that driver here...!!! but god luck...!!
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
..and some luck comes over us, if we need a special Hardware!Some HTC Devices handles SDHC, others do not...is this possible?Or not?
Extracting and installing the driver may be possible, Omap850 is there, but what about the CardSlot? Ive heard, there are some Specifications for SDHC...
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
bellevue Washington..I live not too far from there, i live in Everett.
SDHC driver
I happened to see a file called omap850_sdhc.dll in your own post:
http://forum.xda-developers.com/showpost.php?p=1407553&postcount=856
You opening this thread means this one doesn't work?
I already baught a 4 GB SDHC card a month ago to find out it doesn't work in any device i have... damn. Hope somebody can get a hold of the driver for us.
May not work..
...because ive read the sdhc.dll means HostControl and not HighCapacity....
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
DSF said:
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
Click to expand...
Click to collapse
Hello,
Tried it on my Tornado, but doesn't work with SDHC. It doesn't detect the Storage Card. It does work with a 2 GB non-SDHC card. So no harm to install it, but you still cannot read SDHC. damn.
hi and thanks for testing
.. strange.. maybe we need newer version of omap850_sdhc.dll?
Unless I'm missing something here: The file you had linked was from a post in the Universal forums. The Universal doesn't have an OMAP850 cpu but an Intel Bulverde. Since the driver support is cpu dependent, it was to be expected that the one for the intel won't work for the omap.
Yes, but I can see and use the storage card with these dlls.
I've tried to copy sdbus.dll & sdmemory.dll from other WM5 build (omap850 smartphone) and the phone doesn't recognize the storage card anymore. After deleting these dlls (when deleting , the original file from ROM comes back) and rebooting , storage card is avaiable again.
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Tell us more!!
Hoe exactly did you apply this driver and wich driver did you use?
The HTC or this for Fujitsu Siemens?
Isn't thoose the same things?
IS there any issues like wifi not working or Active Synk synchronization problems?
Yes, the driver fujitsu siemens works in Samsung SGH-I600 WM6 and it does not have problems of wifi and active sync, working all
http://forum.xda-developers.com/attachment.php?attachmentid=83392&d=1209243092
THANKS GreateVK and FreePK
Final questions:
Does it needs a hard reset of the device when applying?
Can you removed it afterwards if something gets wrong?
Thankkkks
Not hard reset only it requests to reinitiate device, after installing to driver, and it is possible removed in removing programs.
Sorry by my English
Cool looking forward to test it!
When applied this driver works with non SDHC card too right?
Now I'm having 2GB Sandisk micro sd card, if I apply this SDHC driver, this card (2GB non SDHC) will work with no complications, isn't so?
I make a test now with one microsd 256mb and she recognizes, no problem
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
liquidsky2037 said:
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Click to expand...
Click to collapse
hello
i have something for you --> http://wiki.modaco.com/index.php/Samsung_i607#Latest_Official_ROM_Downloads
this is latest update for black jack
look on this side .... device will be much faster with wm6 /wm6.1 not official
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
patron55 said:
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
Click to expand...
Click to collapse
Hello
Because you have card reader broken
juanfervs said:
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Click to expand...
Click to collapse
Great, works like a charm; thanks a lot!
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
fujiman2004 said:
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
Click to expand...
Click to collapse
hello
Files like xxx.cab you must instal on your device, you nothing unzip just instal on your device ....
i have download this think, and i'll try tomorrow....
gonna buy those SDHC first...
thx 4 sharing....
nice! time to do some upgrading. thank you for this.
kasovnik said:
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
Click to expand...
Click to collapse
Have u tried not to insert a card ?
just start the smartphone without it. install driver from phone memory.// it gonna helps u
a !! an' don't forget 'bout unlockin' (if it's still not)
Hi Mr.juanfervs, I hope u can help me out; recently I tried to upgrade my i600 WM5 to WM6. and successfully downloaded the upgradation by WCED downloader; after the phone tried to restart & stuck up at 'Ultra Messagling'. from here the usb connection failed the PC to recognize the phone. Can you tell me 1. how can make connection between my phone and the PC; 2. how can I restart my phone and 3. how can I revive my phone. Thanks
I have 4GB Kingston mini-SD card which I uce with my Tornado! but today happened something and when I connect phone to PC ( with ActiveSync) I dont see anything on storage card but I see all the files on the phone! and one more thing-when I write something on the card(without formating) I dont see it on the phone! Sorry my bad English
what card do you have?do you have a SDHC?Cuz i have one 2 but i do not know how to make it work on my SPV C600
Do you see the card at all in your phone?
Profy_X said:
what card do you have?do you have a SDHC?Cuz i have one 2 but i do not know how to make it work on my SPV C600
Click to expand...
Click to collapse
no it doesn't SDHC it is only SD card with which I work few month
nav1Do; said:
you see the card at all in your phone?
Click to expand...
Click to collapse
Yes I'll see it!
Maybe formatting the card will solve this problem.
Are there any programs to format the card without card-reader??( I have WM6.1 Pro not standart)
When I install WM6.0 Shadow/Neo I saw card from PC and work with it! But I wanted to flash a WM6.1 (not so) Plain Jane - 5.2.19202 (Build 19202.1.0.0) FINAL and I do so....now I cant see my card as earlier.....maybe in the 6.0 there are some drivers?
Hi,
Hoping someone can help, although from what I've found online it seems as tho I'm SOL. I have a 16GB card that I was using on a focus. I'm not gonna use the focus and wanted to keep the card, format it and I don't care about erasing the content- just as long as I can reuse it.
Is this possible at all or has anyone found a workaround way of doing this? I would hate to just toss the card out pretty much if it's worthless.
Thanks in advance for any help...
Use a Nokia Symbian Phone with micro Sd Slot to Format it.
First after insert the card ignore the message of Crypted Card or so.
Then go to the options menu and format the card. After This u can use ist in any device
ElNinio80 said:
Use a Nokia Symbian Phone with micro Sd Slot to Format it.
First after insert the card ignore the message of Crypted Card or so.
Then go to the options menu and format the card. After This u can use ist in any device
Click to expand...
Click to collapse
nice thanks...I'll try to find a way to get my hands on one. Any other methods in case I can't get a symbian one?
I've used my girlfriend Olympus camera and my Nikon camera to format my card (Centon 16GB) on a few occasions. But I have to trick the card to get it to be detected in the cameras. If I just put the card in the camera normally it doesn't detect it, but when I do the following steps it always works.
1. Hard reset (format) my phone using the 3 hardware buttons without the card in it.
2. Turn the phone off and install the sd card.
3. Hard reset (format) a 2nd time using the 3 hardware buttons, but with the card still in.
4. Turn the phone off and take out the card. Do not reboot, you must turn the phone off after the 2nd hard reset.
5. Insert the card into a camera and try a format.
Not sure why, but if I reboot after hard resetting, my camera's cannot detect or format the card. Its possible that the encryption isn't written until you reboot after a card is formatted.
TriAxisFL said:
I've used my girlfriend Olympus camera and my Nikon camera to format my card (Centon 16GB) on a few occasions. But I have to trick the card to get it to be detected in the cameras. If I just put the card in the camera normally it doesn't detect it, but when I do the following steps it always works.
1. Hard reset (format) my phone using the 3 hardware buttons without the card in it.
2. Turn the phone off and install the sd card.
3. Hard reset (format) a 2nd time using the 3 hardware buttons, but with the card still in.
4. Turn the phone off and take out the card. Do not reboot, you must turn the phone off after the 2nd hard reset.
5. Insert the card into a camera and try a format.
Not sure why, but if I reboot after hard resetting, my camera's cannot detect or format the card. Its possible that the encryption isn't written until you reboot after a card is formatted.
Click to expand...
Click to collapse
This seems ... really extreme. I hope in the future Microsoft releases some sort of service tool (like the one for the NoDo update) that will allow recognition and format of cards on Windows.
abenitez64 said:
Hi,
Hoping someone can help, although from what I've found online it seems as tho I'm SOL. I have a 16GB card that I was using on a focus. I'm not gonna use the focus and wanted to keep the card, format it and I don't care about erasing the content- just as long as I can reuse it.
Is this possible at all or has anyone found a workaround way of doing this? I would hate to just toss the card out pretty much if it's worthless.
Thanks in advance for any help...
Click to expand...
Click to collapse
Its easy m8...very easy
If you dont have one, get a 5$ card reader and use this tool to format the card in your pc
http://www.partitionwizard.com/free-partition-manager.html.
colossus_r said:
Its easy m8...very easy
If you dont have one, get a 5$ card reader and use this tool to format the card in your pc
http://www.partitionwizard.com/free-partition-manager.html.
Click to expand...
Click to collapse
and you've tried this on a real windows phone 7 device not the hd2 convert? there is a huge diff
If you can find a Mac with a card reader, then you can clear out the partition with the Mac Disk Utility.
You can use pretty much anything - I tried it on Windows Mobile (HTC formating SD card utility - worked fine), Android (SGS with FroYo - had to press Format twice - worked fine), desktop WIndows and SD card in card reader - with using diskpart (list disk, select disk X, select partition 1, delete, select partition 1, delete, create partition blabla - worked fine too)
Haven't tried Linux box
OndraSter said:
You can use pretty much anything - I tried it on Windows Mobile (HTC formating SD card utility - worked fine), Android (SGS with FroYo - had to press Format twice - worked fine), desktop WIndows and SD card in card reader - with using diskpart (list disk, select disk X, select partition 1, delete, select partition 1, delete, create partition blabla - worked fine too)
Haven't tried Linux box
Click to expand...
Click to collapse
You have an HD2, if you have an official WP7 device the card is set up very different. So far the only way known to "normalize" the SD card is to use a Nokia phone or odd tricks with random cameras.
voluptuary said:
You have an HD2, if you have an official WP7 device the card is set up very different. So far the only way known to "normalize" the SD card is to use a Nokia phone or odd tricks with random cameras.
Click to expand...
Click to collapse
I think this is not true.
domineus said:
and you've tried this on a real windows phone 7 device not the hd2 convert? there is a huge diff
Click to expand...
Click to collapse
Hello M8...
HD2 runs wp7 and the formating and partition of the sd card its the same with any wp7 device...
Its working ... i change my first sd a 4gb card that i had installed wp7 with another bigger one (8gb).
The tools that i have post, can delete any wp7 partion
You can even copy partition to a usb hard disk for backup before you delete it.
And for this to be resolved:
1. Can you please get the minitool partition wizard and try to delete that partition and see whats happen ????
2. Please report back your findings ??
colossus
colossus_r said:
I think this is not true.
Click to expand...
Click to collapse
Try to google/read FAQ/forums before posting. It's 100% true.
http://forum.xda-developers.com/showthread.php?p=12179672#post12179672
colossus_r said:
I think this is not true.
Hello M8...
HD2 runs wp7 and the formating and partition of the sd card its the same with any wp7 device...
Its working ... i change my first sd a 4gb card that i had installed wp7 with another bigger one (8gb).
The tools that i have post, can delete any wp7 partion
You can even copy partition to a usb hard disk for backup before you delete it.
And for this to be resolved:
1. Can you please get the minitool partition wizard and try to delete that partition and see whats happen ????
2. Please report back your findings ??
colossus
Click to expand...
Click to collapse
partition is NOT the same. For hd2 converts running windows phone 7, 200 mb partition of the hd is partitioned to be recognized by windows, therefore making any low level formatting utility work to regain the initial amount of memory as if it was new. BUT for real wp7 devices, the partition scheme is different and cannot be recognized by any computer. Making the partition tool completely and utterly useless...
For non converts (HD2 devices) the only way is to use a nokia device. Otherwise you will be SOL
sensboston said:
Try to google/read FAQ/forums before posting. It's 100% true.
http://forum.xda-developers.com/showthread.php?p=12179672#post12179672
Click to expand...
Click to collapse
Sensboston ... You are right .... I stand corrected.
Sinse as i already said i have an HD2 running WP7 i was under the impression that is the same.
No its not....Its different on the HD2 format for wp7..
And seems that the Nokia solution its the one that works for now...
Now because of this i found the time to learn more about wp7 sd cards.
If any one wants to read more here is a good start with more links
http://lifeinthefastlaneok.wordpress.com/
Thanks again
colossus
colossus_r said:
If any one wants to read more here is a good start with more links
http://lifeinthefastlaneok.wordpress.com/
Click to expand...
Click to collapse
Good catch; probably, mods should copypaste that article to WP7 FAQ to prevent future speculations about this topic.
Back on this ...
Seems that SD Formatter 3.0 has the abillity to format WP7 Cards ????
This member here says that he did it with the that app.
Can anyone confirm this ????
colossus_r said:
Back on this ...
Seems that SD Formatter 3.0 has the abillity to format WP7 Cards ????
This member here says that he did it with the that app.
Can anyone confirm this ????
Click to expand...
Click to collapse
I have a 16GB Kingston MicroSD that was paired with my first Samsung Focus. I've tried all the apps listed here with multiple computers, external card readers, etc, and nothing will unlock the card so far.
spokanedj said:
I have a 16GB Kingston MicroSD that was paired with my first Samsung Focus. I've tried all the apps listed here with multiple computers, external card readers, etc, and nothing will unlock the card so far.
Click to expand...
Click to collapse
I was able to reformat a 32gb card that I used on my HD7 using one of the Nokia Express Music phones. Forgot the exact model. It will ask for a password but you can always hit cancel and then go through the formatting
Hello
I tried to migrate an Micro SD Card as Internal Storage on the Phone. After checking the Micro SD Card the Phone says it is to slow,please use a U3 Class Card.
So i bought a Samsung Pro 64Gb Card which is Class U3. The Phone checks and still tells me the Card is to slow,please use a U3 Card. Does anyone know the Problem
and maybe has a Solution for me?
Kind Regards
W4LT3RWH1T3 said:
Hello
I tried to migrate an Micro SD Card as Internal Storage on the Phone. After checking the Micro SD Card the Phone says it is to slow,please use a U3 Class Card.
So i bought a Samsung Pro 64Gb Card which is Class U3. The Phone checks and still tells me the Card is to slow,please use a U3 Card. Does anyone know the Problem
and maybe has a Solution for me?
Kind Regards
Click to expand...
Click to collapse
Have you tried formatting it to different filesystems through an adapter on your computer?
The_scam said:
Have you tried formatting it to different filesystems through an adapter on your computer?
Click to expand...
Click to collapse
Hy,
No,i didn't know that this is necessary. What file system is needed? NTFS,Fat32 or is there a Special System for Android
Do i need a special Software to format the Card or can it be done with Windows?
W4LT3RWH1T3 said:
Hy,
No,i didn't know that this is necessary. What file system is needed? NTFS,Fat32 or is there a Special System for Android
Do i need a special Software to format the Card or can it be done with Windows?
Click to expand...
Click to collapse
It can be done with Windows. I don't know if this will work or not, but just play around a bit. Maybe Samsung formats it for their phones only ?
The_scam said:
It can be done with Windows. I don't know if this will work or not, but just play around a bit. Maybe Samsung formats it for their phones only ?
Click to expand...
Click to collapse
So,i did what you mentioned,i formatted the SD in ExFAT by Windows. But not fast,i did the slow method.Don't know if it was necessary,but after that I put the Card in the Phone aaaaand Tadaa
it works
Thank you very much, i haven't thought of that
:good:
W4LT3RWH1T3 said:
So,i did what you mentioned,i formatted the SD in ExFAT by Windows. But not fast,i did the slow method.Don't know if it was necessary,but after that I put the Card in the Phone aaaaand Tadaa
it works
Thank you very much, i haven't thought of that
:good:
Click to expand...
Click to collapse
No problem, glad it's working