Database Info

Help! Wrong ROM installed !!

Guys,
By mistake I have been installed Wizard rom on my Prophet ....
Any chance to repair ?
When I try to re-flash with correct rom, the utility says that battery is bellow 50%. But I'm sure that it is not, as I have charged fully before do this stupid thing - put wizard rom on my prophet ...
Thanks for your help .....

Solution found!!!
Thanks !!!!
http://forum.xda-developers.com/showthread.php?t=259860

Guys,
Same problem I have been installed HP IPaq rom on my XDA Atom Phone
After installing that rom my Mobile Hangup and reboot again and again. also not sync with my PC. if the Mobile detect it shows HP USB Sync
i am anable to installe any rom becouse my phone not detect in PC
If anybudy have Idea how to install the Rom Please suggest me ASAP...
When I try to sync with PC he didant
Thanks & Regards

Problems with rom update

Hi all
First of all sorry for my grammer, english in not my native language.
I've tried to update my O2 XDA Neo with SMART1 WM6 Rom, i've download the file and started the "UPGRADE_ROM.bat" after installation finished i notice an error click then hardreset the phone, for a second on the display apear the HTC logo, after that the QTec blue screen with the IPL 2.15.0001; SPL 2.20.0001; GSM 02.20.21; OS 10.1.0.811 and then nothing happens. I hardreset the phone several times but so far no good. I come up with idea to go to bootload (holding camera button and pressing reset) and try to reflash it but the update_rom.bat says "No Device Connected" from there i have no idea what to do. I'm with MS ActiveSync 4.5 please help me.

the same problem with me i tried several methods to fix this problem but unfortunetely couldn't find any solution to fix it finally took my phone to the technical service.If you have quarantie I recommend you to the same thing.But never say them that I tried to flash a new rom because this breaks the quarantie.Just say my phone doesn't start.Don't worry they can't understand that you 've tried to flash your O2

Ok, things you should *do* before upgrading to WM6
Make sure that you have AKU2.2 (for instance RUU_Prophet_220734_2207114_024721_NVID.exe) installed _BEFORE_ upgrading to either AKU 3.3 (aserg for example) or WM6. This is in any case true for G4, most probably this goes for G3 as well, but I cannot say this for sure, since I do not own one.
If you happen to get stuck at boot screen because update process failed, grab the rom above and run it with USB plugged in, this will 9/10 of all cases fix your device.
No, I do not have a link to this rom, try to look for it yourself.
For the rest, happy upgrading

rom flash
make sure you disable your antivirus softwear and your windows firewall don,t use any extended usb hubs and you have cid unlocked it make sure let it do a full flash dont do enything else with your pc when you flash your phone good luck i hope this was usefull

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia

Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!

Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......

The same problem, the 2.03TX WWE is a nightmare for me.

I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini

you should flash from bootloader.

I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id

I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...

to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?

hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..

I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful

Hello
I was sucessfull.
There is a 2 step flash!!!
P-O

I try to use this too but nothing no flash ....

Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...

ok this img of error the image 1 when start exe the other when stat update noid

jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723

I use xp ...

well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.

I try more and more but notuhing

Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

"catch-22" Phone don't want let me flash a new ROM, PLEASE HELP!

Hi,
I'm almost broken down :'(
since days I'm trying everything to update the rom of my smartphone with the following operation system "XP and Vista".
I've got a Xda Touch diamond, but Vista says I've got a Touch Diamond P3700. Now let me tell you the catch-22:
I'm connecting the phone via usb cable to the pc(any usb-hub on the back of the pc)
Vista and Xp says "connected". Now I'm running RomUpdateUtility.exe. In the same folder
is the new rom called "DIAMIMG.NBH"
Now I'M clicking "Next" and again "Next". Now he says"verifing the information on your PDA Phone.. Please wait..
After that he says Current Information about you PDA Phone: Image version: 1.93.407.1
So now I'm clicking "update" the new Image version is 1.00.000.0
(If I use another Update Utility he says to Image Version 2.03.207.2)
Clicking "Next" and then again "Next" My Phone turns black and then the phone displays the three-color mode
and below the "serial" change to "usb" and a few
seconds later the phone shows a bar of 0% and on WinXP the bar also shows 0%.
Suddenly the connection is off. And a few minutes later the update Utility(PC) says EROOR(262) UPDATE ERROR.
I even disbaled the standby and hibernation modes on the PC. And I even tried flashing from Internal Storage!
ABsolutly futile! The three-color mode displays DIAM300, SPL-1.30.OliNex, MicroP-Diam (Led) v11,
Psoc_Diam STAGE_PVT v=x32
Is may Phone locked for new roms?
Please HELP ME before I'm going sick ´:__(
Best regards
Colbad

Welcome to forums
Hope this link helps
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Good luck,

nothing helps. I give it up!
I'll get me a new phone.

slow down lol,
dont rush out and get a new phone just yet.... all flashing problems are actually quite simple, you just need to be methodical and patient
Firstly, i always flash with XP, call me old fashioned but its what ive always done lol.
in the past when ive had 262 errors (whilst flashing my touch cruise RIP) the radio i had installed at the time prevented further flashes.
What you havent said is what your current rom is and what rom you are trying to flash.

Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad

colbad said:
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
Click to expand...
Click to collapse
Colbad,
Please tell me you have read the wiki or at least the stickys on how to flash with either hardspl or uspl etc??
If not ur gonna end up with a fancy looking brick.... what have you tried so far and from where?

sorry for bothering you.
I solved the issue finally
Now everythings fine.

[Q] custom 6.5 for polaris

hey dudes,
I finally managed to put a wm 6.5 rom with manila2D on my Qtek 9100.
Now a friend of mine also wants that stuff on his smartphone.
He has a HTC Polaris (Touch Cruise) which is running wm 6.1 dutch.
I told him it would be in english, but that;s no problem.
I managed to find a rom, but no matter what I do...I can't get in on his phone.
Could someone get me a step by step guide on howto do it?
I am gonna use this rom:
http://forum.xda-developers.com/showthread.php?t=554071
anyone wanna help

my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.

19rsn007 said:
my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.
Click to expand...
Click to collapse
whether you try to use Hard SPL V2 .. ?
for the perfect flash HardSPL , you must remove the sim & sdcards then run SDA ApplicationUnlock installed on your PC only then you can run the ROM Update Utility.exe to flash the hard SPL

hey!!
The SDA Unlocker did it's job...didn't even know I needed this!
HardSDL V2 Worked GREAT!!
My co-worker is really gonna like this.
After downloading the HardSDL in the attachment it was installed in a few seconds.
After that, installing the rom was piece of cake...WORKED LIKE A CHARM!