Guys,
By mistake I have been installed Wizard rom on my Prophet ....
Any chance to repair ?
When I try to re-flash with correct rom, the utility says that battery is bellow 50%. But I'm sure that it is not, as I have charged fully before do this stupid thing - put wizard rom on my prophet ...
Thanks for your help .....
Solution found!!!
Thanks !!!!
http://forum.xda-developers.com/showthread.php?t=259860
Guys,
Same problem I have been installed HP IPaq rom on my XDA Atom Phone
After installing that rom my Mobile Hangup and reboot again and again. also not sync with my PC. if the Mobile detect it shows HP USB Sync
i am anable to installe any rom becouse my phone not detect in PC
If anybudy have Idea how to install the Rom Please suggest me ASAP...
When I try to sync with PC he didant
Thanks & Regards
Related
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
I Have the same problem
My sad story is…..
I purchased MDA Compact II a month ago. I changed its ROM with JAMin’s ROM (after unlocking with LOKIWIZ). The device was OK but camera was not working, so I updated it again with K JAM’s ROM process started 10% to100% as usual & massage appeared congratulation your device is updated successfully. The process was also running on my device as usual. But after that my device (I mean MDA Compact II) refused to start normally it just blinks LED & so LCD. (It is dead now) The PC doesn’t detect it no boot loader is available to update it with its original ROM that I got now. So if you find any thing plz help me & if I get any thing I promise I'll inform you my email adres is [email protected] plz mail me to have your email adress to comunicate
bye
azhar
Re: I Have the same problem
azhar63 said:
I changed its ROM with JAMin’s ROM
Click to expand...
Click to collapse
Why? :?
jun36 said:
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
Click to expand...
Click to collapse
if you say you can get into the bootloader with the AC cable then you should beable to download a SD card image on to the phone.
When plugged in it is not bootloader. Same thing happened to me and i tried the sd image rom. The screen looks like the bootloader but it is not. There are 3 colors and no mention of serial 1.x or whatever it is. I am going to send my unit in 4 repair. Look in the prophet forums there are 2 threads. One is titled upgraded prophet with wizard rom and the other thread is Can anyone help fix my brick. If anyone knows a fix it would be great but I think it has to be repaired by disributor.
Try this
Plz try this link u may fine something http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard
hello all,
I got one Qtek S100 phone with rom version :1.03.04ITA.I tried to upgrade it for english rom but upgrade wizard ran for few seconds and stoped the response with phone.
now when i tried to power on the phone its mentioned serial(with cable connected USB 1.0)like that.
now i need a urgent solution for revive my phone .
please help me guys.
Was this your first time upgrading your s100's rom? Have you read the upgrading instructions? When the s100 is plugged to the pc, the upgrade takes some time (maybe even 20 whole minutes). You should not remove it from there. If you had checked the screen carefully while upgrading, the phone was in fact "on" (just the light was turned off) and you should have let it complete the upgrade.
Just try to upgrade the rom once more and be more patient this time.
yes i was stayed till its mentioned that some error on the computer screen.After that only problem occured.
which firmware should i use to flash this qtek S100 version i mentioned.
please let me know that.
You took the wrong tools. Read this to see what you need http://forum.xda-developers.com/viewtopic.php?t=46628
M
jugnustar
faizalg said:
hello all,
I got one Qtek S100 phone with rom version :1.03.04ITA.I tried to upgrade it for english rom but upgrade wizard ran for few seconds and stoped the response with phone.
now when i tried to power on the phone its mentioned serial(with cable connected USB 1.0)like that.
now i need a urgent solution for revive my phone .
please help me guys.
Click to expand...
Click to collapse
hi
where did you got ROM ENGLISH? p.s reply me site
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
Please someone help me I installed TNTV5 Pro successfully but now i want to install Transformer 1.1 again. I'm trying to downgrade but it says Device not responding although device is connected and active sync is also done with sync and all. and I'm stuck !!
someone please help
are u using vista?
just do exactly as u previously did when u installed both roms (cause u said u wanted transformer again).
reboot pc & ppc & see if it works
It worked after couple of soft resets / PC restart.
Thanks
hi all...
last time i try to flash my universal with wm6.1 , i see an error on my pc on ROM Upgrading progress... and after that i try many roms (wm5 Original,wm6 & 6.1) for several times but i see that error again & again & ... now my pc can detect my device and on bootloader mode the "Serial" change to "USB" when i connect it to pc but i can not flash the rom successfuly,and i can not hardreset it or came back to my old rom too
PLZ help me to solve the prblm
sorry 4 my poor english
Read Wiki.
Do a DOC format using mtty and reflash, things should be alright.
Regards
You shold find answeres here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Tanx for the answer ... i will try it
tanx a lot...my universal back to life
mat226 said:
tanx a lot...my universal back to life
Click to expand...
Click to collapse
Good, I had a fat problem with the clear storage from Ranju's 7.7
I used MTTY to format the flash and my uni backs to life too...