When I try to connect to BT it is not a smooth connection at all. Another odd thing that happens is the device ID on my FUZE and the BT settings on my PC keep mismatching and I don't know how the hell it is happening. I.e. when i change the setting to my device ID to lets say FUZE and then put the setting of devices on my PC for BT I will put that to FUZE as well. After resets and starting over the settings hold and i will connect. However, something always screws up during the sync and then wallaaa the settings on my FUZE device information and PC are changed...
always changes to windowsmobile27 or some other number. does it all the damned time.
Anyone else getting this?
When I sync via USB all is well.
Related
Hi,
When I first got my I-Mate JAM I could connect to my PC via USB or Bluetooth no problems, and ActiveSync would maintain the connection so I could use pass through for internet and keep my items in sync automatically.
But after a while BT stopped working for some reason. I've set it all up again and got it working again now, and while it is a little flaky I seem to get it working with a little playing around.
However, it does not stay connected anymore when connecting via BT (only when via USB). It connects, syncs, then disconnects, even though I have the "Maintain Connection" option selected.
Any ideas to fix this?
TIA
Hi all,
I try not to post too often, and just do a lot of reading and studying and learning.
Anyway, I am running MrFrazz's WM6aR2, and having an issue with active sync and my laptop. Everytime I try to connect to any wireless internet while active sync is running, I lose the connection and can not recover it. It runs fine if I have not hooked up the phone. Once I connect, thats it, and I have to reboot the computer to get it back. I just reflashed some other ROM's on my phone playing around, and did not like them, so I went back. Now it is doing this. Anyone out there think they canhelp me figure this one out?
On your computer go to the activesync app, click on file and then on connection settings and then check the box that says allow wireless connection on device when connected to the desktop.
It still does it even then. I have tried adjusting all of the setting. I am pretty computer competant, and dabble in programming, but this one has me stumped. Anything else I may be missing??
I think I miss read what your actual problem is. Is your phone losing it's wireless connection or is your laptop losing it? If your laptops the one that's losing its wireless connection then it sounds like it's having problem running 2 connections at once. This is just a shot in the dark and probably won't help at all, but try making your connection to you phone a static connection and leave your wifi connection dynamic or vice versa and see if that helps. If not, maybe deleting both of the connections and letting your laptop reinstall the connections might help. Like I said, both suggestions are just a shot in the dark, but there shouldn't be any reason that it wouldn't use both connections at the same time that I can think of unless it's trying to assign the same ip address to both connections but they shouldn't even be in the same range.
I've been triying to figure this out for awhile but here's the basics of what's going on:
I have a Japanese HTC Touch Pro, (and yes EVERYTHING is in Japanese, but this doesn't really bother me.) We don't have MMS over here, so we use a constant 3G connection and mopera U to push email to the phone.
So, when i'm in my Comm Manager I have a Data connection on as well as the phone connection.
If I try to turn on my WiFi it will turn off after 3 seconds (just enables it and disables it)
If I try to use my bluetooth connection, same thing (enables BT, then turns it off again)
If I connect my phone to my PC via USB it will try to connect at first, but will suddenly disconnect after a few seconds.
Well, I figgured out that Active Sync won't allow the connection while the phone portion is turned on. Easy enough, I turn my phone into flight mode and it connects just fine and syncs. While this is a tad retarded, I will accept it.
However, In order to get bluetooth to work, i need to disable the 3G connection. Now.. here's what I don't like:
I *HAVE* to have my data connection for email/internet or anything. But, the phone will only seem to allow either the Data connection through the 3G OR bluetooth/wifi, not both.
Now, if I have BT enabled first, then try to establish the data connection I get an error telling me it cannot connect to the 3G network, same effect though, it will try.. just won't allow it.
What really makes me mad is i'm not wanting to have it networked to anything, I just wanna pair it with a headset so I can listen to the mp3 player while on the train and send out emails from my phone.
I tried calling HTC (good help that was) about it, and they suggested hard reseting the phone, soft reset, ect ect.. There's not really a problem, i'm sure there's just a setting somewhere to allow the multiple connections at one.
Does anyone know of any tricks or ANYTHING I can do so I can use my phone the way it was intended?
Did you ever find an answer to this? I am having a similar problem with my Fuze. When bluetooth is enabled, eventually the phone begins to refuse to open a data connection. :-(
No, i never found an answer. I'm not tech savvy enough to find it out.
But its REALLY annoying. I just want to use my USB headset, not connect bluetooth to any network or route messages that way.
Not sure if this is the fix to your problem, but this helped me when Wifi kept turning off, its a setting in WinMoDevCenter, it stops all data connections when connected to sync
in WinMoDevCentre go to Mobile Device settings -> Connection Settings -> Allow Data connections (last check box)
after that i was able to use wifi while plugged in just fine
Hi All,
I'm trying to setup my computer so it can use my Fuze for an internet connection. I'm currently running...
IVT BlueSoleil version 6.4.249.0
EnergyROM 20090709 Standard
I am able to setup a pairing between my phone and my computer by connecting through BlueSoleil.
I notice that my phone connects to COM10 then disconnects, but it says paired on the BlueSoleil manager (don't know whats up with COM10).
I then go to Internet Sharing and connect (on my Fuze), it says device setup has finished, connect bluetooth PAN on PC.
I go back to BlueSoleil (on my computer), right click on my Fuze and click "Connect Bluetooth Personal Area Network" and it gives me "operation not succesful, please try again".
I'm not sure what else to do, I can connect through activesync using usb, but not through bluetooth.
Any ideas?
Update
I got something going on the connection but no internet connection.
Basically when the phone was pairing with the adapter, it would pop up the "COM Port 10" connected box. During the time it was trying to connect I would right click on the phone and click "connect to PAN" or whatever its called and it actually connected!
However, it assigned me a 169.something address and I opened IE in windows but it woudn't load any web pages....bummer.
I'm having a problem with the same ROM, NRG's last couple of ROM's haven't worked on Bluetooth Internet Sharing correctly for me. When I get a chance, I'm going to roll back to a few months ago when it was working for sure just to confirm it is something with the ROM.
BTW, mine connects successfully, but it doesn't give my laptop an IP correctly.
activesync don't use pan for bluetooth at all it does a direct serial connection over bluetooth not a pan network based one
here is a guide for pan
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
this search should give a lot of step by step guides how one
make the com bluetooth port and connect it giving the search
as it depend on which bluetooth stack being used in both ends
http://www.google.dk/search?source=...ivesync&btnG=Google-søgning&meta=lr=&aq=f&oq=
Solved....sorta
OK, so yesterday I had gotten an IP address and it was connected but I thought I wasn't getting any internet service. Turns out I was, but it was incredibly slow, and the connection would go on and off. It did what I wanted to do but its not useable.
While I'm posting, I wanted to do Activesync over Bluetooth but my Fuze has COM ports from 0 to 9 and my Bluesoleil has Com ports 10 and up. How am I suppose to get the two to communicate if I can't get them on the same port? If I try to create a new port in Bluesoleil it starts and 13 and keeps going up...
bever used that bluesoil but heard many bad things about that stack
never had any issues using ms or vidcomm stacks both on the pc side and pda side
and cross
but never really used PAN as I have a wifi router and even if I did not then
they are dirt cheap and if you got a cable or adsl modem you just plug that into the wifi router and connect your desktop with a cable as they are also swtichs
Changed ROM, very fast now
I changed ROM's this morning to the AHEN_ROM and wow, what a difference. Just connected to see what would happen and its just as fast as the USB connection was. I'm not sure what is different about the ROM's but I can surf the web over my phone connection very nicely now.
Computer OS: XP SP3
Device: HTC TP2
Device OS: WM 6.1
Activesync: 4.5
I have my device connecting and syncing fine to ActiveSync on the computer via Bluetooth, but I would like a quicker way to establish connection. When I get out of Bluetooth range and then re-enter there is no auto-reconnect, so I must go to Settings > Communications > Bluetooth, then under the computer's name click on ActiveSync every time. This gets the job done, but it's too much rigmarole every time I want to establish a connection and synchronization.
If I go to the computer and go into ActiveSync and try to connect under Connection Settings it doesn't see the device. Is there a quick, easy way to connect by creating a shortcut or otherwise not requiring so much interaction to get connected and synchronized? When I set-up ActiveSync through Bluetooth I rather expected it to connect and sync automatically when it got in range, but that would've been to easy I suppose.
Yes i'm wondering the same thing. Is there a reg key for editing this? I normally leave Bluetooth on and would like it to auto connect. My old K800 could do it so i don't see why WM6.5.3 can't.
Is this what you are after? http://forum.xda-developers.com/showthread.php?t=530327
Yes thanks, that's all i'm after. I was having troubling searching for it.