Hi all,
I try not to post too often, and just do a lot of reading and studying and learning.
Anyway, I am running MrFrazz's WM6aR2, and having an issue with active sync and my laptop. Everytime I try to connect to any wireless internet while active sync is running, I lose the connection and can not recover it. It runs fine if I have not hooked up the phone. Once I connect, thats it, and I have to reboot the computer to get it back. I just reflashed some other ROM's on my phone playing around, and did not like them, so I went back. Now it is doing this. Anyone out there think they canhelp me figure this one out?
On your computer go to the activesync app, click on file and then on connection settings and then check the box that says allow wireless connection on device when connected to the desktop.
It still does it even then. I have tried adjusting all of the setting. I am pretty computer competant, and dabble in programming, but this one has me stumped. Anything else I may be missing??
I think I miss read what your actual problem is. Is your phone losing it's wireless connection or is your laptop losing it? If your laptops the one that's losing its wireless connection then it sounds like it's having problem running 2 connections at once. This is just a shot in the dark and probably won't help at all, but try making your connection to you phone a static connection and leave your wifi connection dynamic or vice versa and see if that helps. If not, maybe deleting both of the connections and letting your laptop reinstall the connections might help. Like I said, both suggestions are just a shot in the dark, but there shouldn't be any reason that it wouldn't use both connections at the same time that I can think of unless it's trying to assign the same ip address to both connections but they shouldn't even be in the same range.
Related
Hi,
Could anyone tell me what's the rationale behind this:
When the device connects to the internet via 3G in order to receive mail or whatever, it will just stay connected until you bother to manually disconnect it. But when using wifi, which unlike 3G doesn't cost by the byte, it will disconnect as soon as the screen goes off?
Why on earth is that? Instead of running the hell away from cellular internet as soon as possible it does so with the free wifi? Is there any way to change this behavior? Or am I the only one who's bothered by this?
Besides that, more often than not, I'm having problems connecting to wifi... sometimes it would attempt to connect to a network and then give up and say it's unavailable (even though the signal is excellent and I'm right by the AP). other times, it appears connected but there's no internet... anyone else has these problems? Is my device defective?
Sorry if I'm ranting...
Thanks!
I think the behaviour is to save energy. When the screen goes off, the device "thinks" you don't use it anymore. Wifi drains your battery very fast, so the phone tries to reduce it.
For 3G it's the point, that there isn't much data transfer in order to stay connected. Maybe a few kb for the whole day (I don't know if there is any data transfer anyway, but when it's verly little). That's much cheaper than to pay for the full block (for example 100kb) everytime you disconnect. So staying connected saves money in most cases. That's why.
Connection problems: Do you use any encryption? Maybe that's the problem. So far I use wifi only for data transfers between my Macbook and the device. But I don't have any problems.
If you search hard enough you can find apps that might jus tkeep it on.
One such app is KaiserTweak which will keep that wifi on when screen goes off. problem with kaisertweak is that i have heard it can hard reset some peoples devvices, depending on what options you select.
i might give it a whirl because i hate it when my connection is lost, i end up using my data connection when i dont need to as it tries to take over when device wakes up!
edit: seems ok so far no hardreset yet!
Thanks, will try that.
I flashed a 6.1 rom and it seems to have made an improvement. Now it would connect fine to my home router every time and not just occasionally (it uses the most basic wep encryption). Still no luck at work though... just as before it appears connected but I can't reach anything inside or outside the lan. The encryption there is the more secure wpa-psk and there's no mac filtering.
Anyone successfully connected to a wpa wlan?
I've been triying to figure this out for awhile but here's the basics of what's going on:
I have a Japanese HTC Touch Pro, (and yes EVERYTHING is in Japanese, but this doesn't really bother me.) We don't have MMS over here, so we use a constant 3G connection and mopera U to push email to the phone.
So, when i'm in my Comm Manager I have a Data connection on as well as the phone connection.
If I try to turn on my WiFi it will turn off after 3 seconds (just enables it and disables it)
If I try to use my bluetooth connection, same thing (enables BT, then turns it off again)
If I connect my phone to my PC via USB it will try to connect at first, but will suddenly disconnect after a few seconds.
Well, I figgured out that Active Sync won't allow the connection while the phone portion is turned on. Easy enough, I turn my phone into flight mode and it connects just fine and syncs. While this is a tad retarded, I will accept it.
However, In order to get bluetooth to work, i need to disable the 3G connection. Now.. here's what I don't like:
I *HAVE* to have my data connection for email/internet or anything. But, the phone will only seem to allow either the Data connection through the 3G OR bluetooth/wifi, not both.
Now, if I have BT enabled first, then try to establish the data connection I get an error telling me it cannot connect to the 3G network, same effect though, it will try.. just won't allow it.
What really makes me mad is i'm not wanting to have it networked to anything, I just wanna pair it with a headset so I can listen to the mp3 player while on the train and send out emails from my phone.
I tried calling HTC (good help that was) about it, and they suggested hard reseting the phone, soft reset, ect ect.. There's not really a problem, i'm sure there's just a setting somewhere to allow the multiple connections at one.
Does anyone know of any tricks or ANYTHING I can do so I can use my phone the way it was intended?
Did you ever find an answer to this? I am having a similar problem with my Fuze. When bluetooth is enabled, eventually the phone begins to refuse to open a data connection. :-(
No, i never found an answer. I'm not tech savvy enough to find it out.
But its REALLY annoying. I just want to use my USB headset, not connect bluetooth to any network or route messages that way.
Not sure if this is the fix to your problem, but this helped me when Wifi kept turning off, its a setting in WinMoDevCenter, it stops all data connections when connected to sync
in WinMoDevCentre go to Mobile Device settings -> Connection Settings -> Allow Data connections (last check box)
after that i was able to use wifi while plugged in just fine
Does anyone else have this problem?
My laptop will stay connected for a maybe a minute at a time, sometimes just a few seconds and I have to reconnect. Under Wireless Network Connection, the network is listed as "On Demand", if that helps.
I've tried every version of "Wireless Tether for Root Users" I can find and they all have the same problem. Is there anyway to stay connected?
Is it possible that your computer won't let you connect to an Ad-hoc connection? Maybe as soon as it realizes what it's connecting to it jumps off?
Havent had a problem, are you using the administration portion of wireless thether, you might have to just confirm the connection on the phone and apply the settings, you should have a green sheild when on your phone when a allowed device is connected
As far as I know ad hoc networks are allowed, I am using windows xp.
I have access control on and my laptop is allowed and connects fine, it just will not stay connected.
I am using a Toshiba nb205 netbook with windows xp.
On the Choose a Wireless Network window, next to G1Tether it says "On Demand" instead of Manual or Automatic. I've never seen that before.
I'm using the internet fine, I just have to reconnect every 30 seconds or so. Perhaps my google skills are too weak, but I cannot find anything, any help is very much appreciated.
Can you connect to a wifi network from the phone and stay connected?
Can you connect to a wifi network from the laptop and stay conencted?
"On Demand" is normal for Ad-Hoc Networks.
I had the same problem after upgrading from fresh 1.0 to 1.1 w/ gk-31. I uninstalled wireless tether and reinstalled it from my mybackup pro app backup (the one I made before flashing the new Rom and kernel. Works just fine now.
If I'm not mistaken I believe flipz included a newer version of wireless tether, maybe the old one works better.
I just realized I assumed you are using freshrom...
Might try reinstalling it anyways, let us know how it works out.
Reinstalling didn't work. I'll try out some roms tonight and see if they work any better, thanks anyways
Old post I know, but just wanted to see if anyone had any more ideas here. I don't think it's an android app issue at all, but rather windows. I'll be cruising along the highway with a fine connection, but as soon as windows picks up a random access point, it will jump off my ad-hoc connection and try to connect to the other one. not cool.
I apologize if this has already been addressed. I looked, but couldn't find anything.
Here's my problem. I have a Tilt 8925 and WMWifi Router. My internet sharing connection settings are through Media Net. I have used this connection method for many months. Well, today, I connected my laptop through the WMWifirouter and everything was fine for about 5 minutes. Then my connection was lost, and upon trying to re-establish my connection, I notice that the internet sharing connection is trying to connect through AT&T ISP or something like that. I have repeatedly tried to switch it back to Media Net, but it keeps kicking back to the ISP setting. I have no way of connecting through ISP so, what happened and how do I fix it?
Thanks in advance!
Not sure if this is related or not. I never really paid attention to these settings before, so I can't say. If I look under the wi-fi connections settings tab on my phone, it brings up Configure Network Adapters. It is set to Virtual Ethernet Intermediate Miniport.......under that there are a whole bunch of other things. If I try to change it to IEEE 802.11b/g Compatible Wi-Fi Ad......, it appears as if it accepts the changes, bbut I then go immediately back into the settings and it is back on the virtual ethernet setting. Shouldn't I be able to change it, and could this possibly be why I can no longer connect using the WMWifiRouter?
Any help at all, please???!!!!
Even just a response of I'm not sure is better than no response at all.
HI,
My raph100 won't connect to even an unsecured open network! I've searched and searched and tried:
selecting 'best performance'
manual ip/gateway setting etc
new rom
using advanced config to disable wpa authentication
xdandroid
the 'configure wireless connection settings' finds my network, changes to 'connecting' and then after a while goes back to 'available'
i really don't know what else to do. i bought second had on ebay but fear i won't be able to get a refund.
i will look for some kind of hardware diagnostic tool to try and prove it's faulty.
i've seen that alot of people have this problem but solutions only work for some. lame.
hi again,
i plugged in a new access point to my router and set it up using another channel. touch pro connected no problem and i even used wep. however, for unrelated reasons i did a hard reset and now it won't connect again?!
this is driving me crazy any ideas?
Hi again,
I connected a new access point to my router and set it up with a different channel. Touch pro connected fine, even with wep. however, for unrelated reasons i did a hard reset and now i get the same problem as before!!
This is driving me crazy any ideas?
here is the relevant part of the log from my router
09:13:37 i802_1x:00:18:41:f3:9f:a1 disassociated
09:13:37 i802_1x:00:18:41:f3:9f:a1 associated
09:14:53 i802_1x:00:18:41:f3:9f:a1 disassociated
09:14:53 i802_1x:Closed session for 00:18:41:f3:9f:a1 (Supplicant logoff)
09:14:53 i802_1x:00:18:41:f3:9f:a1 disassociated