playing voip voicemail on my fuze - Touch Pro, Fuze General

We just switched to VOIP at our office and I just picked up a fuze. I have the VOIP set to email me a copy of the voicemail but when i try to listen to the voicemail message media player says an invalid media type was specified.
Do you guys know of any other media players that will play the message? It seems like a codec is missing to play the file. According to the file properties it says its a IMA ADPCM .wav file. Maybe there is a codec I can load so that windows media plays it on the fuze? Do any of you maybe have another media player that I can load to listen to the message on my fuze? I have attached the file that cannot be played on the fuze. It does play fine on the computer.
Thanks for your help

testing testing 1,2,3
works with coreplayer
i would assume then it would work with TCPMP (free)

Im thinking of just buying coreplayer.. Is there a way to make it open the files by default? Right now they always open with windows media player

under options there will be a spot for file associations, so you can change wav files to open up in coreplayer

Related

Voice Command - Default Player Problem

I am using Voice Command 1.5 for PPC (O2 XDA IIs) and recently had to do a re-install. This time I put BetaPlayer on before Voice Command and now BetaPlayer activates when I ask it to play a music track. Previously the Windows Media Player would play the music and I cannot figure out how to change the default player for Voice Command!
Of note - It is not MP3 file associations as this still points to Media Player not Beta Player (Clicking on an MP3 brings up Media Player). Also, when I state "Next Track" with Media Player active it changes track ..... very confusing!
I feel that the activation of Media Player is contained in some form of ini file for Voice Command as I have searched the registry for some link to Voice Command and Media Player but been unable to locate this. If anyone has any suggestions I would be most grateful.....
Found it!
It isn't .mp3 file associations it is .asx association (Playlist).
A simple edit of the registry with PHM Registry Editor soon fixed the problem!
I had the same problem, but my other offending player was mortplayer..
now this solution may work for you so here goes.
1....i uninstalled mort player first because mvcommand tried to call each time i tried to call an artist mp3 file.
when yo try to use mvcommand again to call the artist, an error "voice command.asx" would be displayed. mvcommand actually places this file in a temp directory on your pda's memory.
2.......i then used Gsfinder+ a freeware file explorer program to associate the file asx with "windows media player file" by doing a file open... choose program method,
3 now open the asx file, this will load the media player...close it
and try the command to load an artist from mvcommand.
it worked for me.
if your probblem is related to video files the same procedure may work for that too, but am not sure if it will save an wmv or avi file to the temp directory.
Good luck :roll:

wma ringtones with PocketZenPhone no more

Hey everyone
I need some help with my XDA.
I can no longer play wma files as ringtones. I could a few days ago.
Im a registered user of PocketZenPhone and I used to have different wma ringtones on different profiles.
Now none can be played.
If I use Pocket Music I can play .wma files but if I go to "Settings --> Sounds & Notifications --> Notifications" and select any wma file, even the build in ones and press play I hear nothing. The strange thing is that I can't even leave the "Notifications" menu.
Each time I press Ok it returns me to "Incoming Ringtone" I have to force to go to Today screen to leave this menu. If I select wav file for ringtone its played OK.
I checked out the forums and the net and found some references to Windows Media Player file associations.
I removed all audio progs and even removed any registry key concerning wma files. I created new association with Media Player but still no ringtones.
If I tap a wma file from file manager the first time it starts WM Player and the file is being played OK but if I select a second or third etc the media Player does nothing or most of the times it gives me the following error:
X in red circle
"Windows Media Player cannot play this file
because the required codec is not installed.
Try using Media Player 9 series or later to
copy the file from your computer to your
device again"
What the hell is that? Media Player version is 9 built 14053.
All my ringtones were and are in the \Windows\Rings directory
Registry looks OK
HKEY_CLASSES_ROOT\.wma only has a (Default) String value of WMAFile
and
HKEY_CLASSES_ROOT\WMAfile has association with mwplayer.
Any suggestions.
P.S. Sorry for the big post. just tryed to give as much info as possible.
Wma ??
Does anyone has or had similar problem that can help?
i got that problem..
i got that problem too.. mine i uninstalled pocket music.. then it went fine.. i guess all your wma files was running in pocket music.. that it won't play with windows media.. that i didn't get.. coz if a file is associated it still should and can play.. try it if it works...
You are right wma files were played by Pocket Music but not only did I remove the association and unistalled it but also restored association to Windows Media Player. Still no joy though.
Same problem here!
Well, sort of... The thing is that SOME .wma or midi files don't work as ringtones anymore but some others do.
I also use PocketZenPhone.
Weird...
Media Player error reproducing wma files.
Can anybody more experienced with XDAs help us here. The Media Player error when playing wma files from a file manager can be replicated by anyone here?
The firt one plays but the subsequent ones produce the foll. error:
X in red circle, and,
"Windows Media Player cannot play this file
because the required codec is not installed.
Try using Media Player 9 series or later to
copy the file from your computer to your
device again".
Is sometheing wrong with Media Player installation?
file association
The key is making sure that the .wma is associated with windows media player. you have to go into the application and un/select .wma to default to windows media player. you can also do this with a tweak program, but its best to do it within the actual applications. otherwise, you will hear either nothing or a warning beep in place of the selected file. This will also hold true for any ringtone program you may have.
I just got this problem too. Tried to open a file through explorer and nothing is set as the defult player for wma files. Any ideas how to set them back to windows media player? Is there a simple reg key that can be changed?
Edit: I installed pocket tweak, but when I go to choose a program it starts in my documents with no way to go back up a level to get to the windows folder (where mplaer.exe is).
Edit 2: I did a soft reset and ringtones worked again. How strange.
Media Player error message on wma lpayback
Well "davidleecpowell" if you read my firts post you will see that not only have I removed association from oher audio player but also completely removed the software except media player. Also re assigned association with Media Player but still no ringtones.
If I tap a wma file from file manager the first time it starts WM Player and the file is being played OK but if I select a second or third etc the media Player gives me the following error:
X in red circle
"Windows Media Player cannot play this file
because the required codec is not installed.
Try using Media Player 9 series or later to
copy the file from your computer to your
device again"
Its very strange indeed and the last thing want to do is YET ANOTHER HARD RESET.
Suggestions anyone?

How to reinstall WMPlayer ?

Hi,
Could someone please tell me how can I reinstall Window Media Player for my Tornado and where can I download it ?
The reason I need to do this is that my WMPlayer does not work & MP3 can not be used as ring tone.
If I select any MP3 or WMA file in the setting / Sound, it will say the file is corrupted or not supported. My Phone will only play *.mid file as ring tone.
I installed TCPMP afterwards, and my MP3 files are working fine under TCPMP.
Thank you
AP
You can't reinstall a program being in ROM. You need to do an hard reset...
You need to do a registry hack in order to associate your MP3 files with WMP instead of TCMP.
I'll check later which key you need to modify.
Don't think so.
Dont' uninstall WMplayer. I'm sure that you installed PocketMusic on your device, this has made you could'n set ringtone. If you want to set ringtone, you must paste *.wma (windows media audio 9.0 file) in applicationdatas/sound. Good lucks

Associating MP3 files with Manila player - How?

I want to use the HTC music player to play my podcasts via BeyondPod. BeyondPod's internal player is set to Windows Media Player. You can change this to 'external' in which case BeyondPod uses whatever player is associated with the file format.
I presume there's a Windows registry setting that I need to change. Can someone point me in the right direction and also tell me what the HTC player exe is called and where it is?
Thanks

Cannot Play .wav files on WMMP - HTC TP2

Trying to play voicemail messages sent from my work on my phone, and although I can play most .wav files on my phone, the .wav files that the voicemails messages come back with "Windows Media - An invalid media type was specified" error message when I try to play them. I need to update my windows media to support this file type or find another program that can play these wav files.
Unfortunately, these same voicemail messages play on an iphone, so my employer isn't helping with the issue. I either have to get an iphone or get this figured out. Please help.
My phone is a
HTC Touch Pro 2
Windows Mobile 6.5
GTX 2.5
Anyone used Core player, does that solve the issue?
Guess the solution is to buy an apple, lol.
Resolved.
Was able to locate a pre-regged core player cab on Vuze, installed the cab, rebooted, then inside coreplayer updated the file association to include waveform, rebooted. Issue resolved, wav files play.

Categories

Resources