I am using Voice Command 1.5 for PPC (O2 XDA IIs) and recently had to do a re-install. This time I put BetaPlayer on before Voice Command and now BetaPlayer activates when I ask it to play a music track. Previously the Windows Media Player would play the music and I cannot figure out how to change the default player for Voice Command!
Of note - It is not MP3 file associations as this still points to Media Player not Beta Player (Clicking on an MP3 brings up Media Player). Also, when I state "Next Track" with Media Player active it changes track ..... very confusing!
I feel that the activation of Media Player is contained in some form of ini file for Voice Command as I have searched the registry for some link to Voice Command and Media Player but been unable to locate this. If anyone has any suggestions I would be most grateful.....
Found it!
It isn't .mp3 file associations it is .asx association (Playlist).
A simple edit of the registry with PHM Registry Editor soon fixed the problem!
I had the same problem, but my other offending player was mortplayer..
now this solution may work for you so here goes.
1....i uninstalled mort player first because mvcommand tried to call each time i tried to call an artist mp3 file.
when yo try to use mvcommand again to call the artist, an error "voice command.asx" would be displayed. mvcommand actually places this file in a temp directory on your pda's memory.
2.......i then used Gsfinder+ a freeware file explorer program to associate the file asx with "windows media player file" by doing a file open... choose program method,
3 now open the asx file, this will load the media player...close it
and try the command to load an artist from mvcommand.
it worked for me.
if your probblem is related to video files the same procedure may work for that too, but am not sure if it will save an wmv or avi file to the temp directory.
Good luck :roll:
Related
Hey everyone
I need some help with my XDA.
I can no longer play wma files as ringtones. I could a few days ago.
Im a registered user of PocketZenPhone and I used to have different wma ringtones on different profiles.
Now none can be played.
If I use Pocket Music I can play .wma files but if I go to "Settings --> Sounds & Notifications --> Notifications" and select any wma file, even the build in ones and press play I hear nothing. The strange thing is that I can't even leave the "Notifications" menu.
Each time I press Ok it returns me to "Incoming Ringtone" I have to force to go to Today screen to leave this menu. If I select wav file for ringtone its played OK.
I checked out the forums and the net and found some references to Windows Media Player file associations.
I removed all audio progs and even removed any registry key concerning wma files. I created new association with Media Player but still no ringtones.
If I tap a wma file from file manager the first time it starts WM Player and the file is being played OK but if I select a second or third etc the media Player does nothing or most of the times it gives me the following error:
X in red circle
"Windows Media Player cannot play this file
because the required codec is not installed.
Try using Media Player 9 series or later to
copy the file from your computer to your
device again"
What the hell is that? Media Player version is 9 built 14053.
All my ringtones were and are in the \Windows\Rings directory
Registry looks OK
HKEY_CLASSES_ROOT\.wma only has a (Default) String value of WMAFile
and
HKEY_CLASSES_ROOT\WMAfile has association with mwplayer.
Any suggestions.
P.S. Sorry for the big post. just tryed to give as much info as possible.
Wma ??
Does anyone has or had similar problem that can help?
i got that problem..
i got that problem too.. mine i uninstalled pocket music.. then it went fine.. i guess all your wma files was running in pocket music.. that it won't play with windows media.. that i didn't get.. coz if a file is associated it still should and can play.. try it if it works...
You are right wma files were played by Pocket Music but not only did I remove the association and unistalled it but also restored association to Windows Media Player. Still no joy though.
Same problem here!
Well, sort of... The thing is that SOME .wma or midi files don't work as ringtones anymore but some others do.
I also use PocketZenPhone.
Weird...
Media Player error reproducing wma files.
Can anybody more experienced with XDAs help us here. The Media Player error when playing wma files from a file manager can be replicated by anyone here?
The firt one plays but the subsequent ones produce the foll. error:
X in red circle, and,
"Windows Media Player cannot play this file
because the required codec is not installed.
Try using Media Player 9 series or later to
copy the file from your computer to your
device again".
Is sometheing wrong with Media Player installation?
file association
The key is making sure that the .wma is associated with windows media player. you have to go into the application and un/select .wma to default to windows media player. you can also do this with a tweak program, but its best to do it within the actual applications. otherwise, you will hear either nothing or a warning beep in place of the selected file. This will also hold true for any ringtone program you may have.
I just got this problem too. Tried to open a file through explorer and nothing is set as the defult player for wma files. Any ideas how to set them back to windows media player? Is there a simple reg key that can be changed?
Edit: I installed pocket tweak, but when I go to choose a program it starts in my documents with no way to go back up a level to get to the windows folder (where mplaer.exe is).
Edit 2: I did a soft reset and ringtones worked again. How strange.
Media Player error message on wma lpayback
Well "davidleecpowell" if you read my firts post you will see that not only have I removed association from oher audio player but also completely removed the software except media player. Also re assigned association with Media Player but still no ringtones.
If I tap a wma file from file manager the first time it starts WM Player and the file is being played OK but if I select a second or third etc the media Player gives me the following error:
X in red circle
"Windows Media Player cannot play this file
because the required codec is not installed.
Try using Media Player 9 series or later to
copy the file from your computer to your
device again"
Its very strange indeed and the last thing want to do is YET ANOTHER HARD RESET.
Suggestions anyone?
After a hard reset on my Magician, i installed the last versions of tcmp player pocket music.
Then i changed back the associations to media player in order to have the ringtones working properly, and tried to listen some mp3's with pocket music. I browsed the folder with the mp3's, i was able to see the files but i couldn't open it.
Then, i tried with media player. When i tried to open a file with clicking it from File Explorer, i received the error "Cannot play the file. The file is either corrupted or the player does not support the format you are trying to play." The weird thing is that when i try to open the file from inside of media player's library, i works ok.
I unistalled tcmp and pocket music, but it didn't help. To summarize, the problem is that i can't open an mp3 file directly from explorer for media player, and not at all with pocket music. Tcmp works fine, but i prefer pocket music for mp3 listening.
Any suggestions except hard reset?
(sorry for the complicated post and my bad english)
We just switched to VOIP at our office and I just picked up a fuze. I have the VOIP set to email me a copy of the voicemail but when i try to listen to the voicemail message media player says an invalid media type was specified.
Do you guys know of any other media players that will play the message? It seems like a codec is missing to play the file. According to the file properties it says its a IMA ADPCM .wav file. Maybe there is a codec I can load so that windows media plays it on the fuze? Do any of you maybe have another media player that I can load to listen to the message on my fuze? I have attached the file that cannot be played on the fuze. It does play fine on the computer.
Thanks for your help
testing testing 1,2,3
works with coreplayer
i would assume then it would work with TCPMP (free)
Im thinking of just buying coreplayer.. Is there a way to make it open the files by default? Right now they always open with windows media player
under options there will be a spot for file associations, so you can change wav files to open up in coreplayer
Have started using Microsoft Voice Command and find it very useful when on the move. But I use TCPMP as my media player.
When I use the "Play ..." command in VC it opens it in Windows Media Player.
Is there any way to change this so it opens all media files in TCPMP instead?
Thanks
ajlajluk: SPV E650
Maybe, but here is what I do: I have a dozen or so tcpmp playlists. I put links to them in my start menu (in a Playlist folder). If I say 'Start Pavement' (or whatever), it opens up the Pavement playlist in tcpmp. You may not want to create 100's of links, but you can create ones for your favorites.
Excellent idea! Why didn't I think of that?
Thanks Farmer Ted
Voice command creates a .asx playlist ("\Application Data\volatile\Voice Command.asx") which is launched with the associated player (WMP by default).
If your media player support asx playlist, just associate it to that file type.
Hope it helps !
How about other other features like 'next track', 'what song is this' etc ?
I am now here and i am not sure that here is the correct section, buthave a little problem.
I am runing Wm 5.2..... on my xperia x1 and i can't run mp3 files. I tryed with differrent programs like Core player, pocket music, s2p,windows media player and much more, but it can't be run. when i run a mp3 file with WMP it says it is not accosiated, when i run it with core player, core player opens the "open files" option and when i try to open mp3 files it opens that window again. When i try to open mp3 files with pocket music or s2p then can't start. Where is the problem(the programs are accosiated with .wma files but not with mp3.).Can I make samting ad some files in windowsw folder or import somtingto registry. What must i do to start opening mp3 files?
Sorry for my bad english i hope you understend me.