Related
is there any way to password lock the phone by pressing power button? maybe registry settings, application, or other way? if some1 can explain how, it'll be really great.
tray icon application will be fine too.
If you enable the password feature, and set the time-out to 0, it should ask for a password every time you turn it on.
no, its not suits me, i have 2 minutes phone turn off setting, and i dont want phone to be locked in 2 minutes. all i need is to lock it with power button and auto lock set to 15 minutes.
__s said:
no, its not suits me, i have 2 minutes phone turn off setting, and i dont want phone to be locked in 2 minutes. all i need is to lock it with power button and auto lock set to 15 minutes.
Click to expand...
Click to collapse
Try this:
Kai's Device PIN on/off 1.2
Application Description
Do you protect your device with a password? Then you need this program. Assign it to a button and switch the device PIN comfortably on an off.
User-friendly in 3 steps explained
Deposit (save) the password (encrypted)
Recall by hardwarebutton: ON/OFF of device PIN (without new entering)
Example of use:
You were the hole day away on business and your device PIN is activated. When you get home and you do not want to enter always the device PIN . With this progam you can switch off the PIN easily and quick. On the next day, when you got to work, activate the PIN comfortably by a keystroke without reentering the PIN.
System requirements:
System: Windows Mobile for Pocket PC 2003, 2003 SE, WM 5, WM 6
Screen: 240x320 Pixel or higher
Processors: Samsung, Intel® PXA XScale, StrongARM, OMAP
Its cheap, less than $5.
If it does not power the device off you could use mortscript to run this .exe & a power off .exe & map a script link to a button or an icon or voice command.
Hope this helps.
http://www.pocketgear.com/software_detail.asp?id=22932
1. No trial version
2. I don’t think that utility will satisfy my needs
__s said:
1. No trial version
2. I don’t think that utility will satisfy my needs
Click to expand...
Click to collapse
This program would meet your requirements by having a tray icon or launcher icon.
Mapping it to the power button may not be possible but it could be mapped to any other button if wanted.
This is the only password auto locking software using the standard device lock available.
Your only other option is to create a password on/off MortScript to run Settings/Password and auto input your 4 digit code,tick the required boxes & then run a device off.exe, done this on my old Magician a few years back., works well but its a bit crude compared to Kia's software.
i've download similar application(PSShut XP), but this app doing same as u describe, its runs settings\password lock, and then password promt appears, and u can simply click menue\cancel ). maybe this was working in windows 2003 or wm5, but im using wm6. only thing i've found for that case is vb function SHDeviceLockAndPrompt(), and i need to download SDK and compile an .exe, but im looking easier solution for that problem
clarification
I believe I am also looking for the same functionality:
-scenario: you power off the phone via hardware button and put it in your pocket. In your poocket, the button is pressed accidentally, and because the password lock has not yet auto-activated, the screen is active and you accidentally call your boss, or a total stranger
If this is your scenario, there is a 'screen saver' called MortSaver that can prevent this situation: it requires you to press a 2nd hardware button (user defined) to fully close the screensaver. unfortunately it will not instantly enable the password lock.
this does seem like nothing more than a simple api call, but i would be surprised if there isnt an .exe somewhere to do it aready. will have a look around.
-nate
clarification
I believe I am also looking for the same functionality:
-scenario: you power off the phone via hardware button and put it in your pocket. In your poocket, the button is pressed accidentally, and because the password lock has not yet auto-activated, the screen is active and you accidentally call your boss, or a total stranger
If this is your scenario, there is a 'screen saver' called MortSaver that can prevent this situation: it requires you to press a 2nd hardware button (user defined) to fully close the screensaver. unfortunately it will not instantly enable the password lock.
this does seem like nothing more than a simple api call, but i would be surprised if there isnt an .exe somewhere to do it aready. will have a look around.
-nate
Are there any news about such an app?
I wanted my Artemis pin looked, when i switch it off manually or when 5 min have passed.
try AC's S2U
deedee said:
try AC's S2U
Click to expand...
Click to collapse
I know S2U2, but it's "too big" for my artemis! I'm looking for a small tool. And I want the device locked securely. Slide is not enough.
Stuhl_im_Orbit said:
I know S2U2, but it's "too big" for my artemis! I'm looking for a small tool. And I want the device locked securely. Slide is not enough.
Click to expand...
Click to collapse
S2U2 has a PIN lock, but yes it is a tad on the big side.
Hello,
Yes, I searched everywhere but didn't find any answer.
Is it possible to disable the backlight when notifications comes ? For example, when a SMS or an e-mail arrives, the screen powers up and my pocket presses the screen and do bad things on the screen. This would be a cleaner idea than locking the screen!
I know that phoneAlarm have an option for this but I'm using PhoneWeaver for this profiling job (which is smaller than it). I think it must be a reg key somewhere for this :/
Thanks in advance for your precious help!
To be honest, I do not understand you question but I think you are searching for the sound and alert settings?
Go to start > settings > sound and alerts (and then the 2nd tab)
If this is not what you are looking for, could you be more specific?
he want it to when it turns on because of an alarm or sms or the likes that it
dont have backlight on the lcd
personaly i doubt it's possible i believe that when notifications turn the device on it's 100% the same thing that is sendt to the os as when one press the on button if that is the case that the os cant tell the diff
i doubt it could have different backlight settings depending one
what turns it on
holding the button down for a bit turn off the backlight on many devices
untill the button is pressed for a bit again
also when it's turned off so when the notification turns it on the backlight will be off
but ofcause so will it when power button turns it on
I would like my device (TyTN/Hermes) under windows mobile 6 not to "turn on" when a message arrives because my phone case press on the screen while on my pocket and some strange things arrives (delete messages, surf on the Internet, ...) as random parts and buttons are pressed...
I was hoping this simple thing could have been done easily
slide2unlock
I was wanting the same thing also since I carry my phone in my pocket(htc mogul). As I would reach into my pocket to pull out the phone I would end up pressing button to where programs would open and what not. I tried slide2unlock and I think that has solved my problem pretty good. The only time the phone get unlocked is with an incoming call. Other than that the screen just turns on with an incoming text. Good thing about this program is that if you turn on your screen, the buttons won't do anything without sliding the slider to unlock.
if a password is set it dont go to the today screen and random screen pokes will not result in wild pr0n surfing
or getting a case with s screen in front like the silicon ones or the
full plastic ones will safe the screen from clicks and damage too
I am also looking for a solution. I am currently using slide2unlock, but I would prefer the behavior mentioned above. Specifically, I would like the phone to stay in standby mode (screen off, not responding to button presses or screen taps) when an incoming SMS arrives or phone acquires or loses signal. Currently these behaviors will turn on the phone by itself.
I recently updated to Shamanix 1.3 (aka Schap's 4.01 customized) which has this behaviour
The phone don't turn on when an e-mail/sms/mms arrives (only when a phone call arrives)
Anyone has found the solution for this?
Thanks!
GM.
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
do you have a
settings->buttons->lock ?
no. have you? i've got only Program buttons, Up/Down Control and backlight tabs there
hmm...you mean setting up a lock to turn off all keys until you hit Unlock then confirm by tapping the key on the screen?
Press and hold the "End" button and that locks the device.
It is configured under start>setting>Long key press.
MIGHT NOT be the thing you are meaning though.
no, you know when you pres power button phone goes sleep mode? there should be a setting where you can decide if you want to allow other hardware buttons wake phone from sleep or other wise.
currently which ever hw button i press phone wakes up i.e send (green) button, terminate call (red button) or action (round) button.
this is no good when phone in your pocket. a small touch to any of them wakes phone up. i thought it is standart wm option as i had it since wizard
Hmm, when i power off the only thing which will power back on is pressing the power button, opening the keyboard or removing the stylus?
I've just got a touch pro and when I power off, no other buttons will wake up the phone.
That being said, I still have my Tytn II and the Key Lock application is found under Start...Settings...System...Key Lock. The Long Key Press app is not what you're after.
It seems strange that your Touch Pro wakes up on any button push. Maybe you need to change a registry setting instead?
wierd ; on mine apart from those, any button powers it up. only config tool i used is advanced confing and there isint any setting regarding this on that tool
inspectorgadjet said:
Maybe you need to change a registry setting instead?
Click to expand...
Click to collapse
do you know which key i should change?
On touch Pro there is no Keylock option in the settings.
Only way how to activate the device is to:
1. press power button
2. open the keyboard
3. take out the stylus
There is no config like on the HTC Touch/Diamond.
I've contacted Julien Schapman, vendor of advanced config and asked him to add this settings to his application.
this is his answer:
Ok I will look at it when I could get a Touch Pro.
Best regards,
Julien Schapman.
So I hope his new version will have this settings. This is really missing.
But maybe someone is able to export this registry path on the HTC Diamond:
HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD
there should me something like
"KeyLock"=dword:1
Or maybe another. I don't know.
http://forum.xda-developers.com/showthread.php?t=422871
very cool app to unlock and lock the phone.
Tested and works on touch pro.
I'll be replacing S2U2 with this!
nolovelust said:
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
Click to expand...
Click to collapse
It should be in the \Windows directory:
\Windows\Keylock.lnk
\Windows\Keylock.exe
Create a shortcut in \Windows\Start Menu\Settings
I don't have this in my HD2 - any ideas if it can be installed seperately?
No idea as I have an at&t Fuze and this is a RAPH/TP/Fuze forum You might have better luck if you posted a link to this thread in the HD2 forum? Also, an alternative to s2u2, check THIS thread (QuickShutdown)
n-Joie! (Enjoy)
KeyLock
eugene7 said:
I don't have this in my HD2 - any ideas if it can be installed seperately?
Click to expand...
Click to collapse
I haven't KeyLock in my ROM by default too, but I found it on another forum after many hours searching in the Internet
Unpack it and put enywhere (in example: "Windows" or "Program Files" and run).
Greetings.
I am looking for an option whereby one can tap the screen to wake up device after lock. I tried to look for this setting but it isn't anywhere in the settings, its only for the hardware keys. Since I am using S2U2 I thought this would be useful, but the only way seems to be using the power button, anyway of using the tap on the screen to bring up the S2U2 interface? Thanks in advance.
I've got a different oppnion of usefulness in this case... I'd hate the thought of the PDA activating in my pocket waiting for me to unlock it, the screen always on is a miniature black hole for the battery...
I don't think there's a feature that would enable this, or any 3rd party program that would help you do this... but then again maybe I'm worng...
I agree with you, the only reason that prompted me to look for this option was because I installed S2U2. Now when I want to unlock device I have to switch on power before I use S2U2, whereas it would have been more convenient if I were to only tap the screen and the power turned on. Anyway S2U2 has an option to power down which can be set for seconds, there by saving battery power too. Strangely this option was there when I was using the XDA Wizard on WM 5. Maybe they removed it in WM 6?
Sorry, I don't know about that, I've never used S2U2 before, and I never will because when I want access to my PDA then I want it now, without any delays... but even if it has a power down option it wont help if its the pocket of my jeans...
I am using windows 6.5 which has this 'iphone' type slide to unlock, but it only goes on if i lock it through the start menu. On my stock telus rom it auto locked and had you tap 'unlock' and confirm, which was annoying but turns out useful. In my pocket my phone now seems to like to call people and take pictures, so I'm forced to lock it, which is fine, but i wish it would auto lock everytime i put it into standby, is there a way to do this, but not the pin # lock, the slide the bar lock screen?
mdrewitt said:
I am using windows 6.5 which has this 'iphone' type slide to unlock, but it only goes on if i lock it through the start menu. On my stock telus rom it auto locked and had you tap 'unlock' and confirm, which was annoying but turns out useful. In my pocket my phone now seems to like to call people and take pictures, so I'm forced to lock it, which is fine, but i wish it would auto lock everytime i put it into standby, is there a way to do this, but not the pin # lock, the slide the bar lock screen?
Click to expand...
Click to collapse
There is a setting in the S2U2 that will enable the lock when the backlight goes off... also you can edit the registry so that the autolock will come up like it did on 6.1.
I assume you like the wm6.5 automatic lock when suspend. If that is the case download smart lock
http://www.1800pocketpc.com/2009/06...-of-your-default-windows-mobile-6-5-lock.html
and set the setting wm6.5 lock and and suspend lock. after configured, hold end key for 10 seconds to activate it first time.
mdrewitt said:
I am using windows 6.5 which has this 'iphone' type slide to unlock, but it only goes on if i lock it through the start menu. On my stock telus rom it auto locked and had you tap 'unlock' and confirm, which was annoying but turns out useful. In my pocket my phone now seems to like to call people and take pictures, so I'm forced to lock it, which is fine, but i wish it would auto lock everytime i put it into standby, is there a way to do this, but not the pin # lock, the slide the bar lock screen?
Click to expand...
Click to collapse
I installed the cab, but i dont see the application anywhere, its not in my list of apps, nor can i find it through file explorer...any help?
If you installed Smart Lock it will show up in Settings>System>Smart Lock. I know took me a while before I figured that one.
i got it. but it never does anything...
goto the registry and change DeviceLockWhenSuspend to 1... that will enable the windows lock when you press the button at the top of the phone.
It is located at HKEY_CURRENT_USER\ControlPanel\Keybd
Make sure your reset your phone after you make the change.
sorry, I'm new to WinMo, what's a program I can use to edit my registry
Resco file explorer has a great reg editor!
AstronusX said:
I assume you like the wm6.5 automatic lock when suspend. If that is the case download smart lock
http://www.1800pocketpc.com/2009/06...-of-your-default-windows-mobile-6-5-lock.html
and set the setting wm6.5 lock and and suspend lock. after configured, hold end key for 10 seconds to activate it first time.
Click to expand...
Click to collapse
Hi AstronusX
Do you know where else smartlock can be downloaded from, mirrors perhaps?
The link posted wont allow me to download for some reason.
I got smartlock also and edited the registry settings but still nothing happens. Any ideas?
Map the top key to launch DeviceLock.exe in the Windows folder using this program:
http://forum.xda-developers.com/showthread.php?t=554240
It will still retain the screen shutoff function, but will also activate the lock.
FlyingAfroman said:
I got smartlock also and edited the registry settings but still nothing happens. Any ideas?
Click to expand...
Click to collapse
I just installed smartlock without registry edit, and it works fine on my HD2.
(Only changed the settings in program itself). Maybe the combination the problem
AndrewTheMan said:
Map the top key to launch DeviceLock.exe in the Windows folder using this program:
http://forum.xda-developers.com/showthread.php?t=554240
It will still retain the screen shutoff function, but will also activate the lock.
Click to expand...
Click to collapse
Where is DeviceLock.exe , I can't find it anywhere