Hello all,
I have installed minidialer & IPhDyle dialer. The skin would have a "end" button instead of a "call" button. And i was unable to change that.
So I wanted to uninstall IPHDyle but without success.
I have used Advanced Config to deativate the skin abilities in the dialer, so i would be able to use the dialer again.
I am now unable to roll back to the original dialer
What should i do ?
Thank you for your help.
contact the maker of the software
Did you perform a soft reset after uninstalling?
alot of times reguardles of a softreset skins will "stick" they are not completely removed and leave a ghost print......
but i don't think he has even gotten that far. Its sounds like the cab isn't showing up in th remove programs app, it sounds like he just disabled the skin through a reg key
Well I havn't tried the dialer he is saying he used and tried to uninstall so I can't say much about how this one works or uninstalls; however, I have not had any problems uninstalling dialers using the System Remove programs and then soft reseting the device. It would probably be helpful if buddy would let us know for sure what process(s) he tried using to uninstall
Thanks for the answers.
The thing is, when i ask to uninstall it form the remove program software, after attempting to uninstall, it says that it wasn't able to completly remove the program and it asks if i want to remove it from the programs list.
Than i did soft reset, and then the whole thing is messed up :/
the files were probably in use because the phone was active, install the skin again, soft reset your device and then uninstall BEFORE opening up the phone application.
Go back to your previous backup, and it will do.
By the way, I had the same problem with the "End" button instead of "Call". In IPhiDle thread, several people asked about this bug, but the author didn't respond. Anyone know why this happens?
if you don't manage to uninstall you can always install over it.
either the same dialer or another one.
Thank you, I'll try uninstalling without the phone active.... Will see what happens, I'll let you know.
Regarding the "end/call" issue, I was wondering if it could be because of the language of the phone, my phone is french and the skin is probably english... I don't know
Related
I have d/l the program and installed it on my XDA.
from some reason, no matter what i did, the phone volume allways was down to MUTE.
tried several options and several things but couldnt make it work - allways MUTE.
So i decided to uninstall it - but, it is still on MUTE !!!!
nothing helps now, the phone volume refuses to go on !!!
im pushing it up (the volume) but it continues on returning down to MUTE.
Will i need to hard reset the device???
Is this program ****ed my phone settings?
PLEASE HELP!!
i have even tried to delete all registries related to this software - nothing, still on MUTE.
hi
i had same problem
try to soft reset it
and tell me
:lol:
hi
i had same problem
try to soft reset it
and tell me
:lol:
Did Soft Reset almost 10 times.
this is so idiotic....the worst thing a software can do to you is make you HR your device.
im still waiting for suggestions, i dont want to HR, and im not getting (hearing) calls now.
Help Please.
what about those software programers? no one to help????
Try this: Reinstall PocketZenPhone 3.5. When asked to keep your old settings, say no. Go to Today settings Items. Click on PocketZenPhone Options and create all your profiles. When finished (and not before that !), save settings, close all and return to Today screen. It should be OK.
Hello,
sorry I cannot check easily the forum as I travel this end of week.
Could you tell me what you did to have the phone in mute mode even if you uninstal PZP ?
On which target did you install (XDA1 or XDA2) which ROM ?
It is the first time I hear about such problem with PZP... but we will find why it happens and I will correct that if it is a bug
Regards.
I have installed applications around 45 (less than 50 for sure) but after installing the last three - four apps I found that Remove Program list is not showing anything. Immediately I removed the lastly installed four five programs using SK tools but the Remove Programs list is still blank although the programs were successfully removed. Everything is working alright though. I think something has crashed in Registry.
It also happened earlier and I had to hard reset to get it back. But this time I am seeking advices from anybody if there is a way to get back things anyway - probably by a Registry Edit.
parthabhatta said:
I have installed applications around 45 (less than 50 for sure) but after installing the last three - four apps I found that Remove Program list is not showing anything. Immediately I removed the lastly installed four five programs using SK tools but the Remove Programs list is still blank although the programs were successfully removed. Everything is working alright though. I think something has crashed in Registry.
It also happened earlier and I had to hard reset to get it back. But this time I am seeking advices from anybody if there is a way to get back things anyway - probably by a Registry Edit.
Click to expand...
Click to collapse
this is a bug in windows mobile. we found it on the shadow on tmos stock rom.
there is no fix for it. just gotta use active sync to remove programs or like you used sktools.
OK, so I have to stay with the blank menu only till I hard reset.
parthabhatta said:
OK, so I have to stay with the blank menu only till I hard reset.
Click to expand...
Click to collapse
yes sorry to say
I had the same problem after installing a bunch of programs and tools. But I think I found a solution: after removing VoxOC Setup.CAB "remove programs" is working again. I'm not sure that it was VoxOC Setup.CAB but give it a try....
Infact I dont have VoxOC installed in my device. So it might be something else. Anyway, thanks for your suggestion.
I installed the following programs from this thread:
- HTC_Task_Manager_2.1_34837.5.cab
- AudioManager_2.0_1819.1228.cab
- Dr. Gonzo s730 Audio Manager.cab
- Vox_BlackSecondHTCSplashscreen.cab
- Vox_BlackCommManager.cab
- Contact_changer_v1.3.cab
One of them is the villain and caused the remove program menu to appear empty! I would suspect the Second HTC Splashscreen as I had troubles removing the program...
I don't know what the deal is, I had them this morning, and even after a restore, I don't have any of my Input methods anymore. They all show but when I select one it doesn't apply. I should have:
Block Recognizer
Compact QWERTY
Full QWERTY
Keyboard (it defaults to this every time)
Letter Recognizer
Phone Keyboard
Transcriber
I have recently installed the new Landscape Full Manila update but I had these options even after that.
Anyone know how I can reinstall these options?! I hate that default keyboard!
It seems like they are all there still, like I can see options for them all, etc but it just wont change, also its like the small arrow by the keyboard isn't activated and I cant click it, I can change the default keyboard from small to large, but that's it!
ERRRR, what pisses me off is I backup ALL THE TIME, before every app install even, and when I do a restore, it still doesn't work, WTF good are backups then! Or does Spite Backup just suck and I should be using another?
This worrying about everything from one min to the next with this device is the only bad thing about it.
The only suggestion I have for you is to do a hard reset and restore using the most recent back up file until you find a back up file that works for you. I have used sprite back up many times before but this has never happened to me.
Are you using the stock Fuze ROM?
Yeah I'm using the stock ROM but I bypassed the bloatware and installed TF3D that was just released in the software thread, the full one with landscape mode.
I tried several backups and none worked, strange, not sure what caused this but I did find a work-around, its a small app called SIPChange, it was a shot in the dark but it worked for me, for anyone else with this issue, try it:
http://forum.xda-developers.com/showthread.php?t=271008
This actually even fixed the little arrow issue I have that wasn't letting me select the Input method on the fly, I did notice it loads at every reset tho, I don't care as long as it works!
Thanks guys, I hope this thread will help anyone else with the issue.
---
Deafcyclist said:
I'm using the latest XDANDROID on my AT&T Tilt2 (Rhodium) and i just simply can't seem to be able to keep it uninstalled. when i try to uninstall it, it seemed like it is indeed uninstalled but every time i reboot and go into XDANDROID, it's back there.
I do not need the extra features. I just generally prefer the simplistic default message function that android already have.
I've only started using android for a few days so far so if i've missed something simple, i apologize in advance. Likewise, if someone could help me with this, I thank you in advance
P.S. I've tried the search function and i just couldn't find anything about uninstalling handcent SMS rather than uninstalling the default messages.
Click to expand...
Click to collapse
How did you try and uninstall it? Was it through Settings-> Applications, etc, or was it with an unistalling app?
---
Deafcyclist said:
I tried it via setting--> application and a app called aTrackDog. everytime i tried to uninstall it, it was rather quick so i'm assuming that it is only uninstalling a few files and the handcent sms is fixing it every reboot.
Click to expand...
Click to collapse
Hmmm, well I would try to install it again, and install an uninstaller called Apex, just search for that, its the first one to come up. If Apex doesn't work, and if another regular uninstall through settings doesn't work, then I would leave it, or wipe your phone again if it bothers you too much to have it.
Remember you can just turn Handcent notifications off and turn on the default notifications, set all the messaging to the default messenger and you'll never even know it was there. But I would try to reinstall then uninstall with both of those methods. Let us know how it goes.
---
Deafcyclist said:
i've upgraded handcent from 2.9.29 to 2.9.30 to 'reinstall' it and then used aTrackDog to remove it. it seemed to work perfectly well. so I've went ahead and rebooted to see if it persisted. it didn't. i now have Handcent SMS 2.9.29 still on and that Apex software is buggy since it didn't detect handcent and a number of other apps on it.
gonna try to figure out how to disable Handcent SMS notification and see if it persist. I don't neccessarly have to reset my phone since the XDANDROID is running purely from my microSD (using HARET).
Handcent SMS is really really annoying for me now cause I still have to go into the default SMS client for the notification for that to stop. I'm essientally having double notication for every messages i'm getting.
P.S. I've just noticed that these other apps are also persisting too despite my effort to uninstall them;
Digital Rain
Hero Clocks
Live Wallpaper Picker
Starfield
Click to expand...
Click to collapse
Well, I'm unfamiliar with the inner workings of Xdandroid and why it wouldn't be uninstalling the apps you don't want, but I'm very familiar with Handcent. So to turn of the notifications, open Handcent and on the screen with all of your conversations press the wrench in the top right. Then go down to Notifications and uncheck the "Display message notifications in status bar" This will stop you from getting double notifications. If you wanted to use Handcent and turn off the notifications in the default, open the default with the conversations listed, go to menu, then settings, and the same thing - uncheck the notifications button.
Perhaps after you uninstall the apps, there is something on your SD card that could be making it still be there. Maybe uninstall the app then mount your SD and do a computer search over your sd for anything dealing with Handcent, or whatever app and delete it. I'm sorry I can't be of more help, hopefully someone else using Xdandroid can give some insight.
---
I think I killed my phone hahaha! Right when I need it for job interviews :silly:
So I rooted my phone, installed Titanium backup to uninstall useless applications on my LG optimus one (LGP500H). Started backing up everything and removing one application at a time, being careful. When I got to "Nuance", I thought it was a useless program for voice control, so I backed it up then uninstalled. Then before it finished (Or after, I don't know), "force close" messages kept looping and I couldn't get out. So I restarted my phone (managed to do this between two "force close" messages).
Surprise, my phone reboots, but to a black screen with only the notification area up top. When I lock then unlock the screen, I see my background, then I swipe to unlock the screen and it goes back to that black screen. Even the "Search" hard button does not show up anything. So all I can do is check my notifications, turn on/off the wireless, gps, data, sound. Nothing else.
So I decided it was time to install CyanogenMod, but found out you absolutely need to install ClockworkMod to reboot in recovery mode. So I'm stuck. Can't do anything, can't find on google how to flash CM without ClockworkMod, no idea what is the problem.
I even tried to reset to factory default, I get past the configuration screens to choose the language and the time, then it goes back to the black screen. So I need to completely wipe my phone and replace it with cyanogen mod, I think it's past trying to recover anything.
I saw one other guy with that problem on google and nobody really answered.
EDIT:
I think maybe I just found out that I might have deleted the home screen somehow? although I didn't delete anything that I wasn't sure of.
If anybody else has this problem and can't get an answer like me, I figured out the solution.
Send a message text to your phone from a friend's phone with a link to the market for any application. Then find Titanium backup and install it. you will be able to run it from the notification area, then find your backups, and reinstall them. Boo-yah!