where can i find it?
I suppose you are looking for THIS?
HTH
Thanks
Thats what I needed, but I figured it out by rereading the instructions
Related
Does anyone have a copy of the Tilt Keyboard OEM package, or know where I could find it in someone else's firmware. I have been searching for it in Alex's firmware (I know it is there somewhere, because I removed something and it screwed up my keyboard), but I have been unable to find it. Any help would be greatly appreciated.
Shadow7789 said:
Does anyone have a copy of the Tilt Keyboard OEM package, or know where I could find it in someone else's firmware. I have been searching for it in Alex's firmware (I know it is there somewhere, because I removed something and it screwed up my keyboard), but I have been unable to find it. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Please read and search more... check the wiki
http://wiki.xda-developers.com/index.php?pagename=TiltSpecificWikiPage
Hi,
I was trying to install the Dutty's WM 6.1 OS on my Boss's Tilt, didnt worked with the kaiser-HardSPLv1, and looked around for solution and found that i can copy "JumpSPL1.56-KAIS" and run it on the Tilt and than can install the OS, but somehow, its giving this 3 Color Screen and Serial and when i connect to USB, it shows USB instead of Serial, than when i try to install Dutty's OS, it comes up with Recovery option and doesnt finish successfully, it stays on 0% and than again goes back to Recovery option.
Please help me, will be enough if i can go back to where i was before installing anything or any way to Hard Reset and get back to the previous state before running JumpSPL1.56-KAIS.
Please reply ASAP.
Thank you,
Dhaval.
Oh For Goodness Sake........you Are Not Supposed To Use Jumpspl To Flash A Rom!!
Anyway to get back ?
Please give me solution.... please.
dhaval said:
Please give me solution.... please.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=396922
Try looking there.
Hi Southrnlake,
Thank you for your response.
I looked at a similar thread and after the white screen, i put the jumpspl on Tilt and ran it and thats how it got stuck on the 4 color screen.
My Screen Shows
KAIS1*0
SPL-1.93.0000
CPLD-8
on the right top corner the tri-color screen displays RUUNBH
and in the bottom White Screen(4th) it shows USB if its connected to USB o/w it shows Serial.
I can no longer connect to the PC using ActiveSync.
Please guide me to fix this problem.
Thanx in Advance.
Dhaval.
dhaval said:
Hi Southrnlake,
Thank you for your response.
I looked at a similar thread and after the white screen, i put the jumpspl on Tilt and ran it and thats how it bot stuck on the 3 color screen.
I can no longer connect to the PC using ActiveSync.
Please guide me to fix this problem.
Thanx in Advance.
Dhaval.
Click to expand...
Click to collapse
i have the same problem doesnt anybody know the answer
okans said:
i have the same problem doesnt anybody know the answer
Click to expand...
Click to collapse
most of us know how to answer and it has been answered many times... why don't u get off ur lazy ass and do some work by searching and reading around.
and to op rule 1: never install anything for anyone.
and secondly u have bad sector blocks which can be cleared using mtty ..again search and read.
THE SOLUTION FOR THE 10,000 TIME DEPENDS ON YOUR SPL VERSION.
FOR YOUR 1.93 SPL IT IS AS FOLLOWS:
USING MTTY ISSUE THE FOLLOWING COMMANDS:
cmd>set 16 0
cmd>task 8
FOR INFO ON USING MTTY, SEARCH & READ.
Thanx GSLEON3...
I am really very much thankful to you for showing that its possible to unbrick my Boss's Tilt.
I went thru this post and couldnt quite understood clearly as to what exactly i need to do, Please guide me what exactly i need to do as i dont want to play around anymore with my Boss's phone.
I searched and looked at this forum : http://forum.xda-developers.com/showthread.php?t=372497
I think this is the correct thread you might be mentioning to search, please correct me if i am wrong.
http://forum.xda-developers.com/showthread.php?t=371154&page=5
Please help me fix this.
Thank You,
Dhaval.
flash the damn thing with its original rom
Thanx to you All
Thank you very much all of you for your replies and keeping up the good work.
I did as GSLEON3 replied and that was it. So Easy. Very Happy.
Now, never touching or helping anybody with ROM Update.
dhaval said:
Thank you very much all of you for your replies and keeping up the good work.
I did as GSLEON3 replied and that was it. So Easy. Very Happy.
Now, never touching or helping anybody with ROM Update.
Click to expand...
Click to collapse
Well, If I would've known that I would NOT have helped you. This is a place of sharing knowledge & learning. If you're not willing to help others, well, you get the point.
GSLEON3 said:
Well, If I would've known that I would NOT have helped you. This is a place of sharing knowledge & learning. If you're not willing to help others, well, you get the point.
Click to expand...
Click to collapse
I think he meant on anyone elses phone it was his bosses phone. You know help someone out by trying to upgrade their phone and blowing it up.
-McMex
Some ppl don't understand what is the XDA comuninity about ...
I am deciding to take the plunge and root my phone. what I am curious about is whether or not I can create a goldcard on a 1 gb sc card. I have scoured google and searched the forums and cannot find an explicit answer to this question. If anyone has some insight I would greatly appreciate it
youngalumni said:
I am deciding to take the plunge and root my phone. what I am curious about is whether or not I can create a goldcard on a 1 gb sc card. I have scoured google and searched the forums and cannot find an explicit answer to this question. If anyone has some insight I would greatly appreciate it
Click to expand...
Click to collapse
I believe that you can do it on anything upto 4gb? either way I used the 2gb card which came with my phone without a problem
i've created on 512mb
it doesn't matter the size, it must be fat32 formatted...and you have to follow instructions which you can find here
http://forum.xda-developers.com/showthread.php?t=572683
What I don't understand is - what's a goldcard?
Sorry for my stupid question, but I allways see "goldcard here, goldcard there"... but what's it??
Is it an SDCard which is able to self run flashing a particular radio/SPL? Can you use it with a perfected SPL? If yes, why don't all just use this method? And also, in case of brick, can it be used to unbrick it? (Dis)advantages?
Thanks
Excellent!!! I'm doing this today. the only other question I have is whether it would be easier for me to do this on windows 7 or my ubuntu partition?
elegos said:
What I don't understand is - what's a goldcard?
Sorry for my stupid question, but I allways see "goldcard here, goldcard there"... but what's it??
Is it an SDCard which is able to self run flashing a particular radio/SPL? Can you use it with a perfected SPL? If yes, why don't all just use this method? And also, in case of brick, can it be used to unbrick it? (Dis)advantages?
Thanks
Click to expand...
Click to collapse
Yep, it is. It doesn't work with every single perfected SPL though
People always use brick incorrectly. If you brick it, your phone is dead, gone, not usable. You effed it up completely and the only way to restore it is to like mess with hardware.
In the case though, where you soft brick it (for example: no ENG spl and you need to flash an RUU or w/e to get it working again) then you'll need a goldcard. Just do what you do and get an ENG SPL in and you won't need a goldcard. With ENG SPL, You can do fastboot commands, which does wonders =)
If it helps, you guys can only really brick your phone if you play with radio and SPL. So while your rooting it, I'll just let you know (This gave me peace of mind..) Don't be nervous, I was the first time! Then I found out you can only brick it if you don't follow instructions and put on the wrong spl/radio.
youngalumni said:
Excellent!!! I'm doing this today. the only other question I have is whether it would be easier for me to do this on windows 7 or my ubuntu partition?
Click to expand...
Click to collapse
Hmm.. I remember reading somewhere that windows 7 causes problems. But that may be for RUU stuff, so give it a try! If it doesn't work, move on over to ubuntu. It should work fine in windows 7 though!
yeah I figured out the windows 7 issue with hot sync and the adb...
im past that. the only isue i am having right now is with the goldcard. from the looks of it i am golden i have a serial but when i type the next command in the instructions
Code:
cat sys\class\mmc_host\mmc1\mmc1:*\cid
im getting a file not found error...
do i need to put my formatted sd card in my phone? or is the info i need physically on the phone?
ok sorry about wasting space and time by asking questions that I was able to figure out. but the only issue i have now is that i flashed the fender rom from theunlockr.com it gets to the android boot screen and now its blank. should i try another rom?
done. thank you
Okay so I've read the guide that's stickied in this forum and I'm still having issues. First of all I bought my phone off eBay and it didn't come with any software, is there anything straight from HTC that i'll need software wise? Also I tried downloaded pimbackup from the guide and tried to run it but all I get is an error saying that it's not a valid win32 application, what's up with this? Quick replys would be appreciated seeing as I would like to get this done tonight. Thanks all
if it says its not a valid win32 app it means that it needs to be copied to your pda
what do you mean by it does not have any software? it's similar to a pc/mac, you need to install softwre to fit your needs ie games etc.
what other issues do u have and which stickie guide did you read??
Sorry for the lame thread guys but I figured it out. Thanks for the help warlock, oh and when i said it didn't come with software I was talking about the activesync software you get when you buy the phone new, it didn't come with that disk. I found an installer online though and it works great. Also I read the noob guide at the top of this section. Thanks again
Moved as not ROM Development.
possibly how to back up my current radio??
My current radio is as follows.. if anyone has an idea where to find it, I would be greatly appreciative.
10.56.9035.00P_10.14.9035.01_M
Sorry if this is already in a thread, but I've searched and have came up empty handed so far. Many thanks!
http://forum.xda-developers.com/showthread.php?t=1178143
Didn't search enough
Yeah, I seen that thread, but I'm kind of unsure as to which one that I need. I'm afraid of trying to flash the wrong one and possibly bricking my phone.(if bricking is possible via flashing a new radio) I'm still a bit green on all of this, but I'm always finding myself thumbing through these threads learning all that I can. I'm thankful for the xda forums.. I've learned a lot, up until now as to how to choose the right radio(baseband) for my phone. I want to flash another, but before doing so, I would like to make sure that I have an exact backup of my current radio.