Database Info

M1000 Connection Problems using Pay and Go sim GPRS

I have followed these instructions:
1. Go to Start -> Settings -> Connections Tab -> Connections.
2. You'll see 2 sets of option links. 'My ISP' and 'Work'. Under the work links, choose 'Add a new modem connection'.
3. Name for connection: o2 gprs. Modem: Cellular Line (GPRS). Tap Next.
4. Access Point Name: payandgo.o2.co.uk
5. Username: payandgo
6. Password: password
7. Tap Finish.
8. Back in the connections settings screen, tap 'Edit My Proxy Server'.
9. Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
10. In the proxy server box enter: 193.113.200.195
11. Tap OK.
12. Back in the connections settings screen, tap the Advanced tab.
13. Tap 'Select Networks'
14. In both drop down boxes choose 'Work' as the connection. Tap OK.
15. Tap OK again.
16. You are now ready to surf o2 pay as you go gprs full internet
In an attempt to get my GPRS to work with my pay as you go sim. However while i seem to be able to get some kind of connection eveytime I try and navigate to a page the connection times out. It is almost as though I am only getting access to wap and not GPRS however the G is showing up in the corner indicating that a GPRS connection is being made. Does anyone know the settings that will sort out the mess i am in, or have any ideas as to the cause of the problem?
Thanks,
Martin

Unable to SMS/Text after Undergoround WM6

I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G

noone seen this? can someone point me in the right direction?

anyone anyone, Bueller.....bueller.....

Did you setup your GPRS connections and all? These don't come setup with Underground and MBE. There is info in the various WM6 threads on setting this up (and even some cabs floating around for some of the providers). I have Cingular and I just went to their website and found info to do this.

GuardianZX9 said:
I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G
Click to expand...
Click to collapse
I have the same problem. There is a workaround though - if you tap and hold the 'To' field in the message, there is a 'Send' option. That one works for me.
Andrew

just flash Radio 2.19.11

i use T-mobile. i use regular T-Mobile GPRS for internet and i also made a new internet connection call T-Mobile MMS
setting similiar below
T-Mobile MMS Settings:
Setting up the data account
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile MMS.
Enter PictureMessaging in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Setting up the MMS profile
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter PictureMessaging in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile MMS from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to PictureMessaging and tap Set As Default.
Tap OK.
Click to expand...
Click to collapse
http://www.pocketpcaddict.com/forum...obile-mda-windows-mobile-5-phone-edition.html
and try switch around 216.155.165.050 to 216.155.165.50

Text messages
For SMS issues, try setting the Voice mail and Text message setting manually (Phone/Menu/Options/Services).Normally the network default settings work, but at times you may have to input the message center no. manually. Just call and ask your service provider for the message center number.
Radio ROM can be an issue at some locations- Try using 2.19.11 as suggested by J.

I have the same issue, I can send text fine, I can receive MMS, but I cant send MMS,
I have the settings just as posted above, and it doesn't work,

tmobile mms settings

WM6 - WIZA300 - NBD 7.4
i know how to edit. . .
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter PictureMessaging in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select T-Mobile GPRS from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Tap OK.
14. Scroll to PictureMessaging and tap Set As Default.
15. Tap OK.
but i do not get the option of T-Mobile GPRS when i look at the drop-down box. Its just "Work, Internet, My ISP" etc...

Did you renames "My ISP" to "T-Mobile GPRS" when you set up the connection? Also, on #8 above, I believe that should be .50 not .050. Hope this helps.

ok, i added the connection, but it wants an access point name....
i dont have a dataplan, i just want to send MMS.

in need hw6955 english rom
in need hw6955 english rom

Raphael + ASDA payg!!!

someone please help me ..
i can't get my phone working on 3g with asda. i had it working when i was on o2 payg but idk what settings to input for asda mobile!! could someone please tell me what i have to do? PLEASE?!
The settings i've found are :
ASDA mobile MMS Settings
APN Name: ASDA MMS
APN Address: asdamobiles.co.uk
Gateway IP address: 212.183.137.12
Username: wap
Password: wap
Session Type: Continuous / permanent
Authentication: Normal
Security: Off
Port Number: 8799 WAP2.0, 9201 WAP1.x
Connection: When needed
ASDA mobile MMS Centre http://mms.asdamobiles.co.uk/servlets/mms
ASDA mobile GPRS Settings (WAP):
Homepage: www.asda-mobile.com/wap
APN Name: ASDA mobile
APN Address: asdamobiles.co.uk
Gateway IP address: 212.183.137.12
Username: wap
Password: wap
Session Type: Continuous / permanent
Authentication: Normal
Security: Off
Port Number: 8799 WAP2.0, 9201 WAP1.x
Connection: When needed
ASDA mobile GPRS settings (Web)
Homepage: www.asda-mobile.com/wap
APN Name: ASDA mobile
APN Address: asdamobiles.co.uk
Gateway IP address: N/A
Username: web
Password: web
Session Type: Continuous / permanent
Authentication: Normal
Security: Off
Port Number: N/A
Connection: When needed
But i don't know what goes where? like i don't see an option for APN address anywhere? or security options? etc.
if someone could take the time to write a quick step by step i'd be massively grateful!
cheers
mitch

Start, Settings, Connections, Connections, add new....
For Internet thingy the last one, mms the first one, it all depends on your contract.
(or you could call ASDA mobile Helpline on 0845 303 2732 for 25p )
(or read the manual)

could someone please help me out with this?

please ffs can somebody help me!!!!! PLEASE!!!

just ring your provider. the reason noone has posted is because they probably dont know. no need to use that language

hey guys, i'm gonna see if i can get these posted somewhere on here, dunno where they would go
here is a walkthrough for the asda mobile settings for WM6.x devices
not tried them on any earlier versions.
if anyone watching could make up a cab then it would be greatly appreciated as i have no idea how to lol (and it would help the customer services guys at asda mobile out too ).
Setting Up GPRS
1 from the main screen tap Start next to the windows icon in the top left of the screen
2 tap on settings in the dropdown menu that appears
3 tap on the connections tab at the bottom of the screen
4 tap on the connections icon
5 tap on the advanced tab at the bottom of the screen
6 tap on the Select Networks tab
7 tap on the top dropdown menu on that page and select My ISP then tap OK in the top right corner of the screen
8 then click tasks at the bottom left corner of the screen
9 under My ISP click on add a new modem connection
10 enter a name for the connection in the box, in this case Asda Wap
11 in the select a modem box tap the arrow icon and change to cellular line (GPRS) then tap next
12 in the Access Point Name box, enter asdamobiles.co.uk and tap next
13 in the user name box enter wap
14 in the password box enter wap
15 the domain should be left blank
16 tap finish
17 Under MY ISP tap on Manage Existing Connections
18 tap on the circle next to Asda Wap to activate these settings
19 tap OK in the top right corner of the screen twice
Setting Up MMS
1 from the main screen tap Start next to the windows icon in the top left of the screen
2 tap on settings in the dropdown menu that appears
3 tap on the connections tab at the bottom of the screen
4 tap on the connections icon
5 under My Work Network click on the add a new modem connection box
6 enter a name for the connection in the box, in this case Asda mms Wap
7 in the select a modem box tap the arrow icon and change to cellular line (GPRS) then tap next
8 in the Access Point Name box, enter asdamobiles.co.uk and tap next
9 in the user name box enter wap
10 in the password box enter wap
11 the domain should be left blank
12 tap finish
13 Under MY Work Network tap on Manage Existing Connections
14 tap on the circle next to Asda mms Wap to activate these settings
15 tap OK in the top right corner of the screen twice
16 from the main today screen tap start then messaging then sms/mms
17 tap Menu then mms Options
18 tap the servers tab and then select new
19 tap server name and enter Asda MMS
20 tap Gateway and enter 212.183.137.012
21 tap server address and enter http://mms.asdamobiles.co.uk/servlets/mms
22 change the connect Via box to My Work Network and then tap done to finish
once both settings have been installed they need to soft reset (switch off and switch on) the device for the settings to function properly

Help Freaking Simplemobile

oky so i bought an unlocked captivate for my girlfriend last week and shes using Simple mobile as a service provider and we need the internet and MMS settings for the phone. also the phone is running stock att 2.1. thanks

You should trade with somebody who has a Vibrant, as Simple Mobile uses T-Mo 3G bands.
Plus, you know, they have their settings on their own website.

thanks everything is working expect that when she receive MMS they wont download any help with that?

http://simplemobile.wdsglobal.com/m...tworkId=&phoneId=3614&bearerId=&mobileNumber=
Setting up the data account
On the device, tap the Menu key.
Tap Settings > Wireless & networks > Mobile networks > Access Point Names.
Press the Menu key and select New APN.
Select Name, enter Simple MMS and tap OK.
Select APN, enter simple and tap OK.
Enter the Username and Password listed below. If no value is listed, leave the field blank.
Username:
Password:
Select MMSC, enter http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc and tap OK.
Select MMS proxy, enter 216.155.165.50 and tap OK.
Select MMS port, enter 8080 and tap OK.
Select APN type and tap MMS.
Select Authentication type, select PAP and tap OK.
Press the Menu key and select Save.